Search

The growth of IoT applications requires DC-DC converters to have small printed circuit board (PCB) areas and high efficiency over a wide load range. A multi-mode operation of DC-DC converters, therefore, is often necessary to achieve this high efficiency over a wide load range. This paper introduces a tri-mode DC-DC buck converter for IoT applications. The tri-mode operation with PWM, PFM, and multiple-sawtooth PWM (MSPWM) modes helps to retain the high efficiency over the wide load range. The MSPWM mode also enhances a noise margin of the converter, ensuring a regular switching operation at an ultra-light load condition. With a load current prediction scheme, the proposed tri-mode converter requires neither additional load current sensor nor multiple mode controllers. In addition, a soft-start operation is employed to prevent an in-rush current. The proposed tri-mode buck converter has been fabricated through a 0.18- $\mu \text{m}$ CMOS process with a chip area of 0.97 mm $\times0.88$ mm. A load-dependent seamless mode transition is realized, and a maximum converter efficiency of 91% has been measured with a 7.4-MHz switching frequency. [ABSTRACT FROM AUTHOR]

A dual modulation technique to improve power conversion efficiency with minimal increase in output voltage ripple is presented. The worsening switching noise caused by parasitic resistance and inductance due to high-switching operation can also be alleviated by the proposed ac ripple detector. Furthermore, the dual modulation method can speed up the load transient response since the switching frequency can increase to 5 MHz during the transient period. At very light loads, the switching frequency is always kept higher than the acoustic frequency to avoid noisy sound. Experiment results show that the converter operates at 5 MHz using a small inductor of 1 \mu \H. The load transient response time is shorter than 3 \mu \s when load current changes from 150 to 450 mA or vice versa. Power efficiency is kept higher than 85% over a wide load current range. Specifically, light efficiency can be raised to about 45% above that of the conventional design. [ABSTRACT FROM PUBLISHER]