Search

This paper presents a systematic approach to synthetize constant power loads using switching converters under sliding-mode control. The generation of sliding motions is analyzed in converters with a series inductor in the input port and a switching function representing the error between the input power and a suitable power reference. The analysis establishes the existence conditions for sliding-mode and the stability of the resulting ideal dynamics. Simulation and experimental results verifying the theoretical predictions in boost, Ćuk and SEPIC converters illustrate the proposal. The design procedure yields a simple, economical and small-size prototype that can be useful in the experimental validation of converters supplying constant power loads. [ABSTRACT FROM AUTHOR]

Multiple-supply are required to minimize the power consumptions in bio-implant systems. A single-inductor multiple-output (SIMO) switching converter is one of the solutions. But it has inherent problems which block the applications in the embedded biomedical systems. In this paper, a circuit arrangement for providing multiple outputs based on low-dropout (LDO) regulator is proposed. The regulating transistor of LDO is time-shared by N output legs. Two error amplifiers (EAs) are utilized in the topology, irrespective of number of the output legs. The corresponding switching strategy alleviates the difficulties associated with controlling multiple switching functions for conventional time-sharing methods, and thus, permits multiple outputs to be generated easily. A prototype multiple-output LDO (MOLDO) regulator with four output legs was fabricated with a standard 0.35 \mu\ m CMOS process. The measurement results verify the good performance of this design such as no cross regulation (CR), small ripples, and less power consumption. Moreover, it does not require inductor and presents low total harmonic distortion, which is very suitable for bio-implant fields. [ABSTRACT FROM PUBLISHER]

The general structure of a multilevel multistate dc–dc converter is introduced, which is a hybrid between inductor-based (buck) converters and capacitor-based (switched capacitor) converters. The control of the new converter is hybrid between switched capacitor converters and buck converters, where the coarse tuning of the output voltage is achieved through the selection of an appropriate operating region similar to an SC converter, while fine tuning is achieved through the adjustment of a duty cycle value similar to a buck converter. A silicon implementation of a four-level four-state hybrid converter is presented as a specific example of the general hybrid converter structure. A new state interleaving technique was employed resulting in an increased effective switching frequency of the converter. Silicon measurements of the integrated four-level four-state converter on a 65-nm GF technology show that the converter can cover a wide range of output voltage values achieving a peak efficiency of 93% with a power density of 47 mW/mm2. The implemented converter attains a response time in the sub- ${\mu }\text{s}$ range with output voltage ripples below 50 mV. [ABSTRACT FROM AUTHOR]

Based on a general critical condition of subharmonic oscillation in terms of the loop gain, many closed-form critical conditions for various control schemes in terms of converter parameters are derived. Some previously known critical conditions become special cases in the generalized framework. Given an arbitrary control scheme, a systematic procedure is proposed to derive the critical condition for that control scheme. Different control schemes share similar forms of critical conditions. For example, both V^2 control and proportional voltage mode control have the same form of critical condition. A peculiar phenomenon in average current mode control where subharmonic oscillation occurs in a window value of pole can be explained by the derived critical condition. A ripple amplitude index to predict subharmonic oscillation proposed in the past research has limited application and is shown invalid for a converter with a large pole comparable to the switching frequency. [ABSTRACT FROM PUBLISHER]