Search

This paper describes a high-frequency pulsed-power generator for various industrial applications such as water treatment, food and medical apparatus for sterilization, or polluted gas treatment. The system is made of silicon-controlled rectifier as a main trigger switch, capacitors, two-stage magnetic pulse compression stages, and a linear transformer to generate a maximum of 120-kV, 5-kA pulse. The parameters obtained through the development are: output voltage: 120 kV (maximum), pulse repetition ration: 300 pulse per second, pulsewidth: 0.25~\mu \texts , and mean power: 30 kW. The designed pulsed-power generator is confirmed to be used effectively for many high-voltage pulsed-power applications related to environmental industry by simulation and experiments. [ABSTRACT FROM AUTHOR]

This paper presents a novel technique for the voltage droop compensation of long pulses in solid-state bipolar high-voltage Marx generators. Considering the modularity of Marx generators the compensation consists in adding one extra stage to perform as a pulsewidth modulation circuit. This stage voltage is added to the output positive or negative pulses, and an output LfCf filter is included to smooth the voltage pulse waveform. A five-stage laboratory prototype of this circuit has been assembled using 1200-V Insulated Gate Bipolar Transistors and diodes with 1000-V dc input voltage. The circuit was operated at 50-Hz bipolar pulse rate, giving 4-kV bipolar pulses, into a resistive load, with 100- \mu \texts pulsewidth and 9.5-ms relaxation time. The circuit was able to compensate 10% of bipolar pulse voltage droop. [ABSTRACT FROM PUBLISHER]

In this paper, a class-D audio amplifier which combines the advantages of the phase-shifted carrier pulsewidth modulation (PWM) and the multiple-level carrier PWM is proposed with a dual-level dual-phase carrier (DLDPC) PWM. The proposed closed-loop amplifier includes a second-order integrator and a DLDPC triangular wave generator. Two sets of 180° out-of-phase triangular waves are used as carriers, and each set has its respective offset voltage level with nonoverlapping amplitude. By performing the double Fourier analysis, it can be found that the linearity can be enhanced and the distortion can be reduced with the proposed modulation. Experimental results show that the proposed fully differential DLDPC PWM class-D audio amplifier features a total harmonic distortion lower than 0.01% with an output voltage swing of $\pm$5 V. [ABSTRACT FROM PUBLISHER]