Search

The concept of the smart city has been created in response to the increasing numbers of people living in cities. Just as the development of technology has evolved rapidly, smart life has also emerged. The goal of the smart city is one day to enable all affairs of daily life to be completed with the single touch of a finger through cutting-edge technology. New and innovative information must be applied effectively to the industry. With the industrial revolution, propelled by the Internet of Things (IoT), big data and the cloud platform have birthed the “smart city,” integrating the IoT and the cloud through mobile devices and applying technology to fields like logistics, finance, healthcare, recreation, surveillance, and traffic transportation, thus providing people with greater well-being and convenience. Following the era of the big data knowledge economy, the IoT has become an important pillar of national economic development. The IoT is expected to provide substantial support for continued and sustainable development of the smart city. Therefore, effective use of the IoT has become an important topic in smart city development. The purpose of this paper is to build a conceptual framework of service innovation, relying on the smart city case of Taiwan. Based on a literature review, in-depth interviews, and case interviews, the proposed conceptual framework of IoT is rooted in the market, policy, and technical aspects. It incorporates eight steps: composition of the project team, service idea generation, service idea screening, development concept selection, design and development, service testing, commercialization, and service quality, to generate new service value and thereby create customer satisfaction. In fact, the IoT is designed to support the smart city vision; thus, this paper describes the various innovation modes of the smart city. Furthermore, the paper presents and discusses the technical solutions and best-practice guidelines adopted in the Taiwan Smart City project. Finally, it discusses the meaning and future research direction of the smart city through the use of the IoT. With wave after wave of digital development civilizing the city's evolution and with the phenomenon of Internet access through mobile phones for each person, the smart city of human factors is clearly coming. [ABSTRACT FROM AUTHOR]

In recent years, there has been an increasing interest in open government data (OGD) around the world. The governments of various countries have encouraged firms to adopt OGD to develop innovative products and services to bring about social and economic benefits. This paper examines the factors influencing the adoption of OGD among firms in Taiwan to fill a gap that prior studies do not adequately address. Based on the sociotechnical perspective, we developed a research model that integrates the following factors that are central to adoption decisions of firms: top management support, government support, competitive pressure, perceived benefits, and perceived barriers. We examined this model through survey data from firms with experience in OGD adoption in Taiwan. The results show a significant positive relationship among top management support, competitive pressure, and the adoption of OGD by firms. This paper serves as a first attempt to contribute to advancing knowledge on OGD adoption at the firm level via empirically testing a research model that integrates factors within social and technical systems. This paper has significant implications for practitioners of enterprise information management and creates a valuable reference for other countries in the early stages of OGD initiatives. [ABSTRACT FROM AUTHOR]

The annual output value of Taiwan’s wafer foundry and IC packaging test ranks first worldwide. The electronics industry has a complete industrial ecological chain in the supply chain system of global information and communication technology. In order to increase market competitiveness and increase the operational flexibility, manufacturing process outsourcing has become a trend in the business model of the electronics industry. The quality of the outsourcing affects the quality and function of the final product, the outsourcer selection is crucial to ensure the quality of the final product. This article takes the wire bonding process as an example, and proposes a fuzzy selection model of quality-based IC packaging process outsourcers. Then, this article selects the six standard deviation indicator that can fully reflect the process yield and quality level as the evaluation tool. Since the indicator contains unknown parameter, in order to improve the accuracy of estimation and overcome the uncertainty of measurement data, this paper applies mathematical programming to derive the confidence interval of six sigma quality index, and proposes a confidence-interval-based fuzzy testing meth as a green outsourcer selection tool to reduce the risk of misjudgment due to sampling errors and improve the accuracy of the selection. [ABSTRACT FROM AUTHOR]

Submarine cables are indispensable for offshore wind farms (OWFs) connected to a power grid. The submarine cable can cause certain degrees of impact on the system performance due to its different lengths, characteristics, electrical parameters, etc. This paper employs the power-system simulation software of Power System Simulator for Engineering (PSS/E) for modeling a future-scheduled OWF, i.e., a large-scale doubly-fed induction generator-based OWF of 200 MW, connected to Jang-Bin distribution substation of Taiwan Power System through five feeders, five circuit breakers, two step-up power transformers, a commercial submarine cable, and an underground cable. This paper simulates and compares the electrical quantities of the studied OWF with different operating capacities under various lengths of three types of commercial submarine cable. The transient surge peak voltages at the common bus of the OWF and the bus of Jang-Bin distribution substation subject to the switching of one of the five circuit breakers of the studied OWF under different lengths of the three types of commercial submarine cable are also compared using the power-system simulation software of ATPDraw in Alternative Transients Program (ATP) version of Electromagnetic Transients Program (EMTP). [ABSTRACT FROM AUTHOR]

It is vital to have an exclusive modification in semiconductor production process because of meeting differentiated customer demands in dynamic and competitive global minuscule semiconductor technology market and the highly complex fabrication process. In this paper, we propose a control system based on the dynamic mixed-effect least-square support vector regression (LS-SVR) control system for overlay error compensation with stochastic metrology delay to minimize the misalignment of the patterning process. Moreover, for the stability of the control system in the presence of metrology delay and to deal with nonlinearity among the overlay factors, the novel Lyapunov-based kernel function is merged with the LS-SVR controller. The proposed controller’s operation has been validated and implemented by a major semiconductor manufacturer in Taiwan. The experiments are verified that mixed-effect LS-SVR controller has the higher validity and higher efficiency in comparison with the exponentially weighted moving average (EWMA) and threaded EWMA controllers which had been previously implemented at the company or applied in similar studies. Note to Practitioners—Due to high production complexity in semiconductor manufacturing process, a meticulous and intelligent process control is needed to achieve higher throughput and customer satisfaction. Monitoring a complex system is challenging because the process components and variables operate autonomously and interoperate with other manufacturing segments. This paper proposes a novel run-to-run (R2R) control system to compensate the overlay error during the photolithography process that efficiently deals with the high-mixed manufacturing environment and metrology delay. [ABSTRACT FROM AUTHOR]

The displacement of synchronous generators by converter interfaced energy renewable resource essentially reduces the system inertia, which can trigger under-frequency load shedding relay. To support the frequency containment, virtual inertia control (VIC) and fast frequency control (FFC) based on energy storage system (ESS) have been developed. Most of the existing VIC did not take into account the power constraints of the ESS. Although some of the FFC methods account for the ESS constraints, they ignore the intermediate steady-state (ISS) operating point of the primary frequency response (PFR). To counteract these problems, a model predictive control (MPC) based FFC, which considers the power limitations of the ESS, the frequency deviation constraint, and the ISS frequency tracking capability, is proposed in this paper. The proposed MPC only requires few local measurements, and the system parameters including inertia constants, onset time of inertia response and the ISS time of the PFR can be accurately estimated. To achieve the optimal control action and reduce computational burden, quadratic programming (QP) is incorporated in the proposed MPC. The proposed MPC is tested on a real Taiwan power system. The fast response and robustness of the proposed MPC has been justified by comparing with the state-of-the-art method. [ABSTRACT FROM AUTHOR]

In the semiconductor industry, the testing section has always played an important role. The testing section often requires engineers to judge the defect, which wastes a lot of time and cost. The accurate classification can provide useful information for engineers through neural networks. In this paper, we present a method for wafer map data augmentation and defect classification. Data augmentation is based on CNN encoder-decoder and the classification is based on depthwise separable convolutions. There are two datasets used, one is open dataset WM-811K and the other is built with a Taiwan company. We train two models with mobilenetV1 and V2 for the different datasets. The light-weight deep convolution can reduce model parameters and calculations, which is very efficient for the testing house with large production volumes. On two different data sets, our proposed method can reduce the number of parameters by 30% and 95%, and reduce the amount of calculation by 75% and 25%, respectively. The test accuracy of the first dataset is 93.95%. The second dataset test accuracy is 87.04%. After the data augmentation, accuracy is increased to 97.01% and 95.09%, respectively. [ABSTRACT FROM AUTHOR]

If an extreme contingency strikes the Kinmen Island power system in Taiwan, it is very likely to cause blackouts. Although an underfrequency protection scheme has been applied, some drawbacks of the protection scheme hinder the Kinmen power system from avoiding blackouts. In the past decade, several blackouts have occurred in the Kinmen power system. To avoid further possible blackouts, a special protection system (SPS) is summoned. This paper describes the design guidelines and deployment procedures of an SPS for the Kinmen power system. The design depends on the Kinmen power system characteristics, and the deployment hinges upon the supervisory control and data acquisition system. Exquisite software was also developed to testify the Kinmen system SPS. Operational records have demonstrated that the proposed SPS can indeed prevent blackouts from occurring in the Kinmen power system. The design, implementation, and operation of the SPS dealt with in this paper might foster further deployments of other SPSs. [ABSTRACT FROM AUTHOR]

In urban environments, Global Positioning System (GPS) signals are often reflected or blocked by buildings causing multipath effects and Non-Line-Of-Sight (NLOS) reception. These effects degrade GPS positioning performance. Although improved receiver and antenna design can reduce the multipath effect to some extent, NLOS elimination is limited due to sensor cost. Measurements based modelling methods have shown promise to reduce NLOS, while positioning accuracy is limited by the correct classification of the signal reception types. These limitations are addressed in this paper by developing an integrated algorithm using matching, Particle Swam Optimized Adaptive Neuro Fuzzy Inference System (PSO-ANFIS) and a spatial city model. The user's location is determined by matching the high accuracy signal reception type determined by PSO-ANFIS with satellite visibility of each candidate position determined by the ray-tracing and a 3D city model. The results from a field test in an urban area in Taiwan show that the PSO-ANFIS based algorithm achieves a classification accuracy of 96%, 88%, and 91% for LOS, multipath and NLOS signals, respectively, which is superior to the other classification algorithms. The final horizontal positioning accuracies in terms of the Root Mean Square Error (RMSE) are 3.20 m using a commercial receiver and 1.88 m using a geodetic receiver. The proposed algorithm has consistent improvements of 88% and 70% respectively compared to the traditional Weighted Least Square (WLS) based positioning method, and is the best compared to the other state-of-the art methods with the improvements ranging from 15% to 77% depending on the test conditions. [ABSTRACT FROM AUTHOR]

A fast retransmit, which reduces the sender’s waiting time before retransmitting a lost segment, is applied to guarantee data integrity with no data loss in transmission. Based on fast retransmit, many application protocols have been enhanced and evolved to ensure quality of service and reduce data transmission time. One of application protocols is the multipath transmission control protocol which is catholically applied in modern computer networks. Communication lines used in this kind of network have different states, namely, failure, partial failure, and maintenance. Therefore, a computer network with a fast retransmit can be classified as stochastic and is called a stochastic-flow computer network with a fast retransmit (SCNFR). This paper assesses the system reliability of SCNFR for the successful transmission of demand d through ${k}$ (${k} \,\, >1$) separate minimal paths (${k}$ SMiP) under the latency. An algorithm is proposed to find all minimal capacity vectors (MCVs) that satisfy the demand and latency. Then, the system reliability is computed based on all MCVs. We adopt two practical cases of the pan-European research and education network and the Taiwan academic network to explore the effectiveness of the algorithm. The results show that the system reliability can be classified as decision reference while the manager decides the better ${k}$ SMiP with higher system reliability. [ABSTRACT FROM AUTHOR]

In a power system, the transmission network is the backbone of electricity delivery from power plants to load centers; hence, it becomes a critical issue for electrical engineers to shorten the service restoration time after a fault occurrence on the transmission line. This application paper integrates the two- and three-terminal hybrid transmission line fault location algorithms based on synchronized phasor measurements into the proposed cloud-computing-based fault location system to inspect the feasibility and practicality of our algorithms for the real transmission-line incidents. The computing results are performed via Google Map for authorized personal computers and the application for intelligent mobile devices is developed to assist engineers in acquiring the fault-event information immediately as well as in figuring out the fault position intuitively and quickly due to its visualization and navigation. Last but not the least, the suggested fault location system has already been applied to the practical 345- and 161-kV transmission networks of Taiwan Power Company for achieving the combination of theory and practice. Up to the present, the proposed system still yields excellent performance verified by realistic fault data. [ABSTRACT FROM AUTHOR]

Earthquake early warning system uses high-speed computer network to transmit earthquake information to population center ahead of the arrival of destructive earthquake waves. This short (10 s of seconds) lead time will allow emergency responses such as turning off gas pipeline valves to be activated to mitigate potential disaster and casualties. However, the excessive false alarm rate of such a system imposes heavy cost in terms of loss of services, undue panics, and diminishing credibility of such a warning system. At the current, the decision algorithm to issue an early warning of the onset of an earthquake is often based on empirically chosen features and heuristically set thresholds and suffers from excessive false alarm rate. In this paper, we experimented with three advanced machine learning algorithms, namely, $K$ -nearest neighbor (KNN), classification tree, and support vector machine (SVM) and compared their performance against a traditional criterion-based method. Using the seismic data collected by an experimental strong motion detection network in Taiwan for these experiments, we observed that the machine learning algorithms exhibit higher detection accuracy with much reduced false alarm rate. [ABSTRACT FROM AUTHOR]

An optimal planning model of the sectional switch and tie line for the distribution network is proposed considering the tradeoff between the system reliability and economy. First, the fault incidence matrices are established for the distribution network, and the explicit analytical expression of the system reliability index is realized by the algebraic operation of the fault incidence matrices and fault parameter vectors. Then, the 0–1 integer quadratically constrained optimization model is established for the sectional switch configuration considering the capacity constraint of the tie line. Finally, the sectional switches and tie lines are optimized jointly to ensure the economic investment and maximize the system reliability. The distribution network in Taiwan Power Company is used to verify the applicability of the proposed optimization method. Compared with the intelligent optimization algorithm, the mathematical programming method in this paper can always find the global optimal switch configuration quickly. In addition, the influence of the tie line capacity constraints on the sectional switch configuration is also considered, which can provide practical reference for the power network planners in the optimization design of the distribution network. [ABSTRACT FROM AUTHOR]

In the semiconductor manufacturing industry the development of single index assessing the equipment health condition is urgent, and thus the dashboard can be used for monitoring thousands of equipment. This paper proposes a novel equipment health index (EHI) framework and a Hotelling T-squared index (HTI) to monitor equipment and support preventive maintenance in real time in the semiconductor manufacturing industry. The EHI framework consists of data preprocessing, statistical process control, analytic hierarchy process, and a comprehensive single index representing the health condition of equipment. It considers different types of the univariate control charts for each status variable identification (SVID), and aggregates the scores corresponding to the control charts throughout the hierarchical structure. The HTI considers the correlation among the selected SVIDs and builds a multivariate index by using Hotelling T-squared statistic. An empirical study of Taiwan’s leading semiconductor assembly manufacturer finds that both the EHI and the HTI supported monitoring thousands of pieces of equipment in real time. In practice, firms can rapidly troubleshoot the root causes of failures by the decomposition of EHI. [ABSTRACT FROM AUTHOR]

Variations of the ionosphere can significantly disrupt synthetic aperture radar (SAR) acquisitions and interferometric measurements of ground deformation. In this paper, we show how the ionosphere can also strongly modify C-band interferograms despite its smaller influence at higher frequencies. Thus, ionospheric phase screens should not be neglected: their compensation improves the estimation of ground deformation maps. The split-spectrum method is able to estimate the dispersive ionospheric component of the interferometric phase; we describe the implementation of this method for the burst modes TOPS and ScanSAR to estimate and remove ionospheric phase screens. We present Sentinel-1 interferograms of the 2016 Taiwan earthquake and ALOS-2 interferograms of the 2015 Nepal earthquake, which show strong ionospheric phase gradients, and their corrected versions. Finally, to validate the results and better understand the origin of these ionospheric variations, we compare the estimated differential ionosphere with global Total Electron Content maps and local Global Positioning System measurements. [ABSTRACT FROM PUBLISHER]

This paper presents the design, implementation, and field measurements of a prototype marine-current power generation system (MCPGS) for capturing energy from marine current. The studied prototype MCPGS employs the flowing marine-current energy near the Cross-Sea Bridge, Peng-Hu Island, Taiwan. The design of the prototype MCPGS has to meet the practical marine-current flowing conditions and the severe environmental conditions in the ocean of Peng-Hu Island. The designed MCPGS unit consists of a three-blade marine-current turbine, a gearbox, a three-phase permanent-magnet generator, and a power converter that is used for converting generated energy to be stored in the battery. Field measured results for the studied MCPGS under different practical marine-current speeds in Peng-Hu Island are performed and analyzed. [ABSTRACT FROM AUTHOR]

It is our privilege to present selected papers from the Asia-Pacific Data Storage Conference 2013 (APDSC’13), held from November 20-22, 2013 in Hualien, Taiwan. APDSC’13 was hosted by the Taiwan Information Storage Association, the National Dong Hwa University, and the Electronics and Optoelectronics Research Laboratories, ITRI, Taiwan. The Conference was also sponsored by the following organizations: The National Science Council, The Ministry of Education, and The Ministry of Economic Affairs of Taiwan, and the IEEE Magnetics Society, The Optical Society of America, The Society of Information Storage System, Korea, and International Society for Optical Engineering, The Magnetics Society of Japan and The Korean Magnetics Society. [ABSTRACT FROM PUBLISHER]