Search

Connection of an LC filter to the output of voltage source inverter (VSI) in squirrel cage induction motor (SQIM) drive converts the pulse-width modulated (PWM) voltages into smooth sinusoidal voltages. However, this connection may lead to closed-loop instability in the rotor flux-oriented (RFO) vector-controlled (VC) SQIM system. The closed-loop stability of the combined SQIM + LC filter (SQLC) system is complex and has not been analyzed properly in the literature. In this paper, a detailed closed-loop stability analysis of the SQLC system has been presented based on stability region (SR) and accordingly the PI gains of VC has been designed. The SR method is adopted to derive the common stability regions for the SQIM system and SQLC system. Thereby, the paper proves that connecting an LC filter in-between the VSI and the SQIM system does not always destabilize the closed-loop system. Further, for an SQLC system, the complete range of current controller gains is obtained at various operating points. The frequency-domain specifications have been used to select a proper stabilizing set and the effect of parametric variation of LC filter on the stabilizing set has also been discussed. The experimental results are provided to validate the analysis. [ABSTRACT FROM AUTHOR]

This paper proposes a novel dual input nine-level inverter (DINLI) topology which requires only seven controllable devices. The dual inputs are un-identical DC voltage sources in the ratio 1:3. A simple control scheme is derived by appropriately modifying the phase disposition pulse width modulation technique to generate high-quality 9-level output from the DINLI topology. At any given instant, a maximum of four switches conduct out of which only a maximum of two switches operate at high frequency, bringing down the switching and conduction losses significantly and improving the overall system efficiency. The bidirectional DINLI (BDINLI) topology with reactive power capability can be realized by replacing the unidirectional devices with the controlled switches (i.e., total nine switches). In addition, the proposed DINLI topology does not require extra voltage balancing circuits which further improves the efficiency. The DINLI operation is verified through MATLAB simulations for grid-connected applications and its extension to an n-level, 3-phase application is also investigated. Experiments performed on a 1KVA laboratory prototype to validate the theoretical claims. [ABSTRACT FROM AUTHOR]

This paper presents Space Vector Modulation (SVM) sequences that reduce Common Mode Voltage (CMV) in Dual Three-phase Asymmetrical Induction Motor (DTAIM). At first, two existing SVM techniques such as Reference SVM (RSVM) and CMV1 are studied. Additionally, three new switching sequences are developed as CMV2, CMV3 and DCMV3, which reduce peak magnitude of CMV by 66.8% in comparison with RSVM technique. In SVM techniques, to obtain least CMV, zero vectors are usually replaced by two opposite large Active voltage Vectors (AV) with equal time duration. In such topologies like CMV1, total six AVs are utilized to synthesize the reference vector. The proposed SVM technique CMV2 utilizes only five large AVs to synthesize the reference vector and reduces CMV. Selection of five neighbouring AVs is reflected in reduction of harmonic flux trajectories and stator current ripple in proposed techniques. Additionally, two more switching sequences (CMV3 and DCMV3) are developed related to utilization of specific zero voltage vectors in all sectors (7 and 56) that produce zero CMV. These two switching sequences also provide easy implementation feature during the development of c-code program. In this study, CMV and stator current ripple are considered as performance parameters for different SVM techniques. All SVM techniques are analysed by analytical results, computer simulations, and using prototype test setup of DTAIM fed by Dual Three-phase Voltage Source Inverters (DTVSIs). [ABSTRACT FROM AUTHOR]

Utility engineers, professionals from regulatory agencies, manufacturers and researchers have discussed if high-frequency distortions produced by rooftop photovoltaic generators are a general power quality concern for distribution systems. In this context, this paper presents the results of an extensive research to investigate the emission and propagation characteristics of such high-frequency distortions. Analytical and theoretical analyses, computer simulations, laboratory experiments and field measurements revealed that high-frequency distortions emitted by rooftop photovoltaic inverters are produced with a voltage source characteristic. As a result, the equivalent grid impedance limits and attenuates significantly the high-frequency distortions injection and propagation into the distribution systems. Moreover, the front-end, low-pass filters found in many home appliances also contribute with such attenuation by sinking part of the high-frequency distortions. In summary, the results indicate that these distortions are unlikely to become a generalized power quality concern, so that the front-end filters commonly available for such devices, when properly designed, are enough to deal with this issue. [ABSTRACT FROM AUTHOR]

The implementation of finite-control-set model predictive control (FCS-MPC) in voltage source inverters (VSIs) can make the system suffer from poor current harmonics performance, which may complicate the design of the required AC filter. To overcome this shortcoming, a carrier-based modulated model predictive control (CB-MMPC) strategy is proposed in this paper. This method enables the utilization of existing PWM modulation techniques with FCS-MPC, where a modulation waveform with zero-sequence signal injection is generated and compared to a triangular carrier wave, while optimizing the selection of the switching states. As it is shown, the studied CB-MMPC strategy not only considerably improves the current total harmonic distortion (THD) but also attains the performance of fast current dynamic response and robustness as the traditional FCS-MPC. Herein, the detailed implementation of the CB-MMPC control strategy is given, while considering its application to the current feedback control loop of a three-phase three-wire two-level VSI modulated at constant switching frequency. Finally, PLECS circuit simulation and a 3-kW VSI prototype are used to verify the superiority and the effectiveness of the presented CB-MMPC strategy. This is also benchmarked to the FCS-MPC and dead-beat based controllers. [ABSTRACT FROM AUTHOR]