Search

Light-emitting diodes (LEDs) are widely used in street lighting, landscape lighting, liquid crystal display (LCD) backlighting, healthcare, etc. As an important part of LED lighting products, LED driver plays a vital role in maintenance costs reduction, energy saving and lifetime prolongation. In this paper, a single-stage LED driver is proposed, which is integrated by a totem-pole bridgeless power factor correction (PFC) unit and several modular LCL-T resonant rectifiers. The totem-pole bridgeless PFC unit and the LCL-T resonant rectifiers are integrated by sharing switches, which can simplify the circuit and reduce the system cost. The output current can be regulated by applying the variable inductor control. Constant duty cycle and fixed switching frequency operation can be achieved as well. The operating principle and the performance of the proposed converter are analyzed in this paper. In addition, a precise parameter design method is proposed by considering the high-order harmonics. At last, an experimental prototype is established to validate the proposed parameter design and variable inductor control method. [ABSTRACT FROM AUTHOR]

The dual-active bridge (DAB) topology is commonly preferred in bidirectional applications due to several attractive features, including auto-adjust of power flow, galvanic insulation, wide voltage gain, and zero voltage switching (ZVS) capability over some power ranges. However, the efficiency of the converter drops at light loads because the ZVS range is directly dependent on the circulating current. Assuming that the processed power is variable, the DAB converter's design must find a compromise between extending ZVS ranges and reducing the reactive power processing to ensure higher efficiency. Aiming this compromise, many papers propose hybrid approaches in which the modulation strategy is selected according to the processed power. However, this is not a simple solution because it demands multivariable control and offline optimizations. This paper proposes a modulation strategy to ensure ZVS and reduce the circulating current for the DAB converters. While the usual phase-shift modulation provides ZVS operation in a range of 40% to 100% of rated power, the proposed asymmetrical pulse-width modulation can obtain ZVS operation in a range of 2% to 100% of rated power. Experimental results demonstrated that the proposed strategy improves the converter efficiency for all power ranges, especially at light loads. [ABSTRACT FROM AUTHOR]

Two-stage AC-DC converters are considered as a prominent solution for DC-type electric vehicle (EV) chargers. However, this kind of architecture suffers from high switching losses with large heatsink and DC-link capacitor volume. To relieve this issue, this paper presents a new hybrid modulation for DC-type EV chargers, where a two-phase clamped discontinuous pulse-width-modulation (DPWM) in the front-end circuit is cooperated with the variable frequency triangular-current-mode (TCM) zero voltage switching (ZVS) or its simplified implementation, i.e., boundary-ZVS (B-ZVS) strategy, in the back-end circuit. The former can stop the switching actions in the front-end stage during two-thirds of the grid period, while the AC currents are at their highest values, which can yield to the best switching loss reduction and deliver high power factor operation. Besides, TCM-ZVS or B-ZVS modulations can achieve ZVS turn-on action for all semiconductors during all operating range in the DC-DC stage to further reduce the power losses on the semiconductors. With such characteristics, the proposed strategies can reduce the switching losses of the system to the best extent, and thus allow an enhancement of the system power density by improving the power conversion efficiency. The proposed strategy is described, analyzed, validated, and benchmarked in a 5 kW SMD SiC MOSFET-based two-stage AC-DC converter. A 99% power efficiency can be achieved with the solution implementing the TCM-ZVS strategy at an output voltage of 400 V and rated power. [ABSTRACT FROM AUTHOR]

A power systems of wearable application requires high power conversion efficiency and bidirectional power flows to obtain the compatibility with various power sources and loads. The conventional flyback converter has a simple structure and bidirectional power conversion capability. However, it shows poor power conversion efficiency caused by hard-switching operation, high DC offset current on the transformer, snubber losses, and large peak current. In this paper, a current-fed CLLC resonant converter is proposed to obtain the high power conversion efficiency and the bidirectional power conversion capability. The soft-switching operation, zero DC-offset current, and small peak current can induce high power conversion efficiency. The asymmetric pulse width modulation (APWM) regulates the bidirectional power flows and the output voltage. The design methodology of the proposed converter is analyzed by introducing its operational principles. The performance of the proposed converter is experimentally verified with a 20 W prototype. [ABSTRACT FROM AUTHOR]