Search

The accurate estimation of the terrestrial latent heat flux (LE) from satellite observations at high spatial and temporal scales plays an important role in the assessment of the water and heat exchange between the earth’s surface and the atmosphere. Although a variety of data fusion methods have been proposed to merge different LE products for more reliable estimates, most of them have ignored the spatiotemporal consistency of LE products across different resolutions. In this paper, we apply the multiresolution tree (MRT) method to improve the accuracy and reduce the inconsistency between the Moderate Resolution Imaging Spectroradiometer (MODIS) LE (MOD16) product and the Landsat-based LE product at different resolutions. Eddy covariance (EC) ground measurements at five sites, MODIS and Landsat images from January 2005 to December 2005 in the north central USA, are used to evaluate the performance of the MRT method. The results show that the MRT method can improve the accuracy of the original LE products (MOD16 and Landsat), and it has the potential to significantly reduce the uncertainty and inconsistency of these products. The bias decreased by 38.3% on average, and the root-mean-square error (RMSE) decreased by approximately 49.2% after the MRT was applied at each scale. Further studies are still required to make the MRT method more universal on a variety of land cover types for long-time periods. [ABSTRACT FROM AUTHOR]

The Ozone Monitoring Instrument (OMI) was launched on July 15, 2004 on the National Aeronautics and Space Administration's Earth Observing System Aura satellite. OMI is an ultraviolet-visible imaging spectrograph providing daily global coverage with high spatial resolution. This paper discusses the ground data processing software used for Level 0 to Level lb processing of OMI data. In addition, the OMI operations scenario is described together with the data processing concept. This paper is intended to serve as a reference guide for users of OMI (Level 1b) data. [ABSTRACT FROM AUTHOR]

The Multispectral Thermal Imager (MTI) satellite is a research and development project sponsored by the U.S. Department of Energy. The primary mission is to demonstrate advanced multispectral and thermal imaging from a satellite, Including new technologies, data processing, and analysis techniques and validation by reference to ground truth. The MTI builds on the efforts of a number of earlier efforts, Including Landsat, National Aeronautics and Space Administration remote sensing missions, and others, but the MTI incorporates a unique combination of attributes designed to advance the state of the art. The MTI satellite was launched on March 12,2000 into a 580 km × 610 km, sun-syn-chronous orbit with nominal 1 A.M. and 1 P.M. equatorial crossing times. The Air Force Space Test Program provided the Orbital Sciences Taurus launch. The satellite-based sensors obtain radiance data that are subsequently processed into measurements of atmospheric and surface properties such as column water vapor, atmospheric aerosol loading, surface temperatures, material composition, and others. This paper provides an overview of the MTI research objectives, design, operations, data products, and data processing and analysis. Several other papers provide greater detail on selected topics. [ABSTRACT FROM AUTHOR]

A comprehensive system that is used to invert the geophysical products from microwave measurements has recently been developed. This system, known as the Microwave Integrated Retrieval System (MiRS), ensures that the final solution is consistent with the measurements and, when used as input to the forward operator, fits them to within the instrument noise levels. In the presence of precipitation, this variational algorithm retrieves a set of hydrometeor products consisting of cloud liquid water, ice water, and rain water content profiles. This paper presents the development and assessment of the MiRS rainfall rate that is derived based on a predetermined relationship of the rainfall with these hydrometeor products. Since this relationship relies on the geophysical products retrieved by the MiRS as inputs and not on sensor-dependent parameters, the technique is suitable for all microwave sensors to which the MiRS is applied. This precipitation technique has been designed to facilitate its transition from research to operations when applied to current and future satellite-based sensors. Currently, the MiRS rainfall rate technique has been implemented operationally at the U.S. National Oceanic and Atmospheric Administration (NOAA) for the NOAA-18, NOAA-19, Metop-A Advanced Microwave Sounding Unit, and Microwave Humidity Sensor, as well as for the Defense Meteorological Satellite Program (DMSP)-F16 and DMSP-F18 Special Sensor Microwave Imager/Sounder microwave satellite sensors. For the validation of the MiRS rainfall rate technique, extensive comparisons with state-of-the-art precipitation products derived from rain gauge, ground-based radar, and satellite-based microwave observations are presented for different regions and seasons, and over land and ocean. The MiRS rainfall rate technique is shown to estimate precipitation, with a skill comparable to other satellite-based microwave precipitation algorithms, including the MSPPS, 3B40RT, and MWCOMB, while showing no discontinuities at coasts. This is a relevant result, considering that the MiRS is a system not merely designed to retrieve the rainfall rate but to consistently estimate a comprehensive set of atmospheric and surface parameters from microwave measurements. [ABSTRACT FROM AUTHOR]

Data merging with interpolation is a method of combining near-coincident satellite observations to provide complete global or regional maps for comparison with models and ground station observations. We investigate various methods and limitations of data merging (or data fusion), with and without interpolation, as a first step toward merging data sets archived in the National Aeronautics and Space Administration Goddard Earth Sciences Data and Information Services Center and made public through the Goddard Interactive Online Visualization and ANalysis Infrastructure (Giovanni) data portals. As a prototype for the data-merging algorithm, this paper uses daily global observations of aerosol optical thickness (AOT), as measured by the MODerate resolution Imaging Spectroradiometer onboard the Terra and Aqua satellites. The goal is to develop a very fast and accurate online method of data merging for implementation into Giovanni. We demonstrate three different methods for pure merging (without interpolation): simple arithmetic averaging (SAA), maximum likelihood estimate (MLE), and weighting by pixel counts. All three methods are roughly comparable, with the MLE (SAA) being slightly preferable when validating with respect to the AOT standard deviations (AOT means). To evaluate the merged product, we introduce two confidence functions, which characterize the percentage of the merged AOT pixels as a function of the relative deviation of the merged AOT from the initial Terra and Aqua AOTs. Eight combinations of merging–interpolation are applied to scenes with regular and irregular data gap patterns. Our results show that the merging–interpolation procedure can produce complete spatial fields with acceptable errors. [ABSTRACT FROM AUTHOR]

The Ozone Monitoring Instrument (OMI) was launched on July 15, 2004 on the National Aeronautics and Space Administration's Earth Observing System Aura satellite. The OMI instrument is an ultraviolet-visible imaging spectrograph that uses two-dimensional charge-coupled device detectors to register both the spectrum and the swath perpendicular to the flight direction with a 115° wide swath, which enables global daily ground coverage with high spatial resolution. This paper presents the OMI design and discusses the main performance and calibration features and results. [ABSTRACT FROM AUTHOR]

The Ozone Monitoring Instrument (OMI) flies on the National Aeronautics and Space Adminsitration's Earth Observing System Aura satellite launched in July 2004. OMI is a ultraviolet/visible (UV/VIS) nadir solar backscatter spectrometer, which provides nearly global coverage in one day with a spatial resolution of 13 km × 24 km. Trace gases measured include O3, NO2, SO2, HCHO, BrO, and OClO. In addition, OMI will measure aerosol characteristics, cloud top heights, and UV irradiance at the surface. OMI's unique capabilities for measuring important trace gases with a small footprint and daily global coverage will be a major contribution to our understanding of stratospheric and tropospheric chemistry and climate change. OMI's high spatial resolution is unprecedented and will enable detection of air pollution on urban scale resolution. In this paper, the instrument and its performance will be discussed. [ABSTRACT FROM AUTHOR]

Transmissions from ground-based systems in C- and X-bands present a significant challenge to the use of these bands for passive microwave remote sensing from aircraft and satellites. Because future missions plan to continue to use these frequencies, it is important to characterize and understand the nature of interference in as much of the candidate spectrum as possible. This paper presents a statistical analysis of interference observed in the continental U.S. using six months of data collected from the C- and X-band channels of the WindSat microwave radiometer. Our findings are consistent with those of previous studies by Li et a!. and Njoku et aL, which are based on data obtained from the Advanced Microwave Scanning Radiometer-EOS using somewhat similar center frequencies and bandwidths. Results show significant radio-frequency interference (RFI) at C-band, including brightnesses in horizontal and vertical polarizations in excess of 330 K, while X-band RFI is less obvious through direct examination of measured linearly polarized brightnesses. Evidence of lower levels of RFI is provided through use of the spectral and polarization indexes of Li et a!., which reveal likely RFI contributions at X-band as well. Further confirmation of X-band RFI is obtained through analysis of the polarimetric channels, which are shown to provide direct evidence of RFI in contrast to the linearly polarized channels. A temporal analysis of the largest C-band RFI sources is also provided in an attempt to further understand their properties. [ABSTRACT FROM AUTHOR]