Search

Impedance-source networks are an increasingly popular solution in power converter applications, especially in single-stage buck–boost power conversion to avoid additional front-end dc–dc power converters. In the survey papers published, no analytical comparisons of different topologies have been described, which makes it difficult to choose the best option. Thus, the aim of this paper is to present a comprehensive analytical comparison of the impedance-source-based buck–boost inverters in terms of passive component count and semiconductor stress. Based on the waveform of the input current, i.e., with or without a transformer, and with or without inductor coupling, the impedance-source converters are classified. The main criterion in our comprehensive comparison is the energy stored in the passive elements, which is considered both under constant and predefined high frequency current ripple in the inductors and the voltage ripple across the capacitors. Two-level and multilevel solutions are described. The conclusions provide a “one-stop” information source and a selection guide of impedance-source-based buck–boost inverters for different applications. [ABSTRACT FROM PUBLISHER]

The Z-source inverter has gained popularity as a single-stage buck–boost inverter topology among many researchers. However, its boosting capability could be limited, and therefore, it may not be suitable for some applications requiring very high boost demand of cascading other dc–dc boost converters. This could lose the efficiency and demand more sensing for controlling the added new stages. This paper is proposing a new family of extended-boost quasi Z-source inverter (ZSI) to fill the research gap left in the development of ZSI. These new topologies can be operated with same modulation methods that were developed for original ZSI. Also, they have the same number of active switches as original ZSI preserving the single-stage nature of ZSI. Proposed topologies are analyzed in the steady state and their performances are validated using simulated results obtained in MATLAB/Simulink. Furthermore, they are experimentally validated with results obtained from a prototype developed in the laboratory. [ABSTRACT FROM PUBLISHER]

The output voltage quality of some of the single-phase multilevel inverters can be improved when their dc-link voltages are regulated asymmetrically. Symmetrical and asymmetrical multilevel diode-clamped inverters have the problem of dc-link capacitor voltage balancing, especially when power factor of the load is close to unity. In this paper, a new single-inductor multi-output dc/dc converter is proposed that can control the dc-link voltages of a single-phase diode-clamped inverter asymmetrically to achieve voltage quality enhancement. The circuit of the presented converter is explained and the main equations are developed. A control strategy is proposed and explained in details. To validate the versatility of the proposed combination of the suggested dc–dc converter and the asymmetrical four-level diode-clamped inverter (ADCI), simulations and experiments have been directed. It is concluded that the proposed combination of introduced multioutput dc–dc converter and single-phase ADCI is a good candidate for power conversion in residential photovoltaic (PV) utilization. [ABSTRACT FROM PUBLISHER]