Search

This paper presents a theoretical harmonic analysis of phase disposition (PD) and phase-shifted carrier pulse-width modulation strategies for modular multilevel converters (MMCs). It is shown that when these strategies are implemented on a per MMC arm basis, their spectral performances converge because of cancellation of odd carrier sideband groups between each phase leg's arms. An improved PD modulation strategy is then presented that uses a single PD modulator for the entire phase leg, followed by a state machine decoder that evenly distributes switching pulses to all submodules across the phase leg upper and lower arms to balance the distribution of submodule commutation events. The resulting strategy achieves optimum phase leg PD spectral performance and also achieves natural voltage balancing of the MMC submodules. All theoretical findings are supported by simulation and experimental results obtained using a five-level MMC prototype. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to investigate the impact of switching harmonics on the instantaneous power distribution in the cells of a cascaded H-bridge-based STATCOM when using phase-shifted pulse width modulation. The case of high- and low-switching frequency for the converter cells is investigated and the interaction between voltage and current harmonics is analyzed. It is shown that in both cases, this interaction results in an uneven power distribution among the cells in the same phase leg, leading to drifting of the dc-capacitor voltages and thereby the need for proper stabilization control loops. It is also shown that the selected frequency modulation ratio affects the active power distribution among the cells. In particular, the selection of a noninteger frequency modulation ratio helps in providing a more uniform power distribution among cells of the same phase leg, thus contributing to the capacitors balancing. A methodology for optimal selection of the frequency modulation ratio is given. Theoretical conclusions are validated through simulation and experimental results. [ABSTRACT FROM AUTHOR]

Multimodule converter-based high-voltage dc (HVDC) power transmission incorporates numerous voltage-source converters (VSCs) connected in series/parallel to provide increased voltage/current and, hence, power ratings. When a selective harmonic elimination pulsewidth-modulation (SHE-PWM) technique is employed, the switching losses of the VSC modules are reduced but the voltages of the series-connected dc capacitors are not naturally balanced. In this paper, a voltage-balancing technique is reported. The technique relies on monitoring the voltage of each dc capacitor and when such voltage exceeds its preset band, the realization of the multilevel waveform reallocates the task to another VSC module to ensure that voltage balance between all capacitors is achieved. Three-phase bipolar VSC modules are considered in this paper and each one is modulated by a precalculated multilevel SHE-PWM waveform. The time-domain waveforms and their line-to-line voltage spectra are verified by simulation using PSCAD/EMTDC. The selected results are presented to confirm the viability of the proposed method. [ABSTRACT FROM PUBLISHER]

This paper presents a flyback switch-mode rectifier (SMR) with spread harmonic spectrum. The SMR switching control is conducted by a charge-regulated pulsewidth modulation (PWM) scheme with constant turn-on period. The inherently stable discontinuous conduction mode operation is preserved to yield good line drawn power quality. In voltage loop, a quantitatively designed PI feedback controller is augmented with a robust error cancellation control scheme. Further improved dc output voltage regulation and input power quality performances are achieved under varied operating conditions. In spread harmonic spectrum control, the harmonic spectral properties of the developed flyback SMR are first analyzed. Then, the dedicated random switching scheme is developed to let its switch current harmonic spectrum be dispersedly distributed. In the proposed random switching scheme, the PWM turn-off period is modulated using 1-b binary sequence, pseudo random binary sequence, and 4-b binary sequences. Under randomized harmonic spectrum, the SMR control performances are not sacrificed. [ABSTRACT FROM PUBLISHER]

This paper presents a pulsewidth modulation (PWM) algorithm for a three-phase ac–dc rectifier, where the third and fifth harmonics are indicated in the input phase voltages. A mathematical analysis, which includes this voltage harmonic's components, shows that the unity input displacement factor (IDF) can be reached by appropriate evaluation of duty-cycle functions. A PWM algorithm is proposed based on this developed theoretical achievement. This approach enables current sensorless unity IDF rectification. The PWM algorithm is investigated theoretically and verified by simulations and experiment. [ABSTRACT FROM PUBLISHER]