Search

Variable-speed multiphase (more than three phases) drive systems are seen as serious contenders to the existing three-phase drives due to their distinct advantages. Supply to the multiphase drives is invariably given from a voltage source inverter. However, this paper proposes an alternative solution for supplying multiphase drive system using a direct ac–ac converter called a matrix converter. This paper proposes the pulsewidth modulation (PWM) algorithm for the matrix converter topology with three-phase grid input and five-phase variable-voltage and variable-frequency output. The PWM control technique developed and presented in this paper is based on space vector approach. This paper presents the complete space vector model of the three-to-five-phase matrix converter topology. The space vector model yield 2^15 total switching combinations which reduce to 243 states considering the imposed constraints, out of which 240 are active and 3 are zero vectors. However, for space vector PWM (SVPWM) implementation, only 90 active and 3 zero vectors can be used. The SVPWM algorithm is presented in this paper. The viability of the proposed solution is proved using analytical, simulation, and experimental approaches. [ABSTRACT FROM AUTHOR]

This paper proposes a unified PWM method for matrix converters so as to establish a common platform which can generate various types of PWM methods in real time by adjusting the free parameters in the modulation algorithm. As a foundation for unification, the general form of the modulation functions for matrix converters is derived using geometric transformation approach. All eligible direct modulation matrices are shown to be of indirect form and are expressed in terms of instantaneous phase quantities. This paper also presents a new viewpoint to consider a matrix converter as a generalized three-level inverter and to apply the double-carrier-based dipolar modulation technique of the three-level inverter to the matrix converter. Several concepts of the two-level PWM inverters are then generalized to the matrix converters for better visualization and understanding of the modulation process. [ABSTRACT FROM AUTHOR]

Multiphase (more than three phases) power electronic converters are required mainly for feeding variable-speed multiphase drive systems. This paper presents one such solution by using a direct ac–ac converter that can be used to supply a nine-phase drive system. The input is a fixed-voltage and fixedfrequency three-phase input, and the output is a variable-voltage and variable-frequency nine-phase output. A simple pulsewidthmodulation technique is developed for the proposed ac–ac converter named as a nonsquare three-to-nine-phase matrixconverter configuration. The developed modulation technique is based on the comparison of a high-frequency carrier signal with the duty ratios. Although the carrier-based scheme is widely employed for the control of back-to-back converters, it has recently been used for controlling a three-to-three-phase matrix converter. This concept is extended in this paper for controlling a threeto-nine-phase matrix converter. With the two techniques that are proposed, one outputs 0.75 of the input magnitude and the other outputs reach 0.762 of the input. This is the maximum value of the output voltage in the linear modulation range that can be achieved in this configuration of the matrix converter. The viability of the proposed control techniques is proved analytically through simulation and an experimental approach. [ABSTRACT FROM PUBLISHER]

This paper proposes an indirect matrix converter (IMC) topology to supply a five-phase load directly from three-phase ac power sources without bulky electrolytic capacitors and explains its operating principle. Using the emerging topology, which combines the five-leg inverter into the rectifier stage of the conventional IMC, the three-to-five-phase IMC topology reduces the number of power switches and results in a simpler commutation compared with the conventional three-to-five-phase direct matrix converter. In addition, a simple approach to realize the carrier-based pulsewidth modulation (CBPWM) method for a three-to-five-phase IMC is presented, and the proposed CBPWM method is analyzed based on the space-vector approach. As a result, the IMC with the proposed CBPWM method can be more easily implemented compared with IMCs with the space-vector PWM method. A three-to-five-phase IMC control platform is realized by coordinating a TMS320F28335 DSP (Texas Instruments) with an EPM7128SLC84-15 field-programmable gate array (Altera). The simulation and experimental results are provided to verify the effectiveness of the CBPWM strategy. [ABSTRACT FROM AUTHOR]

This paper extends the Z-source concept to matrix converters and explores a family of Z-source matrix converters. Their principles and characteristics are analyzed, and a simplified voltage-fed Z-source matrix converter is used as an example to demonstrate its operation, voltage gain versus modulation index, PWM method, boost control, and implementation of the control. Both simulation and experimental results verify operation of the proposed Z-source matrix converter, analytical results, and control method. The Z-source converters can achieve buck and boost operation with reduced number of switches needed, therefore achieving low cost, high efficiency, and reliability, compared to the traditional matrix converters. [ABSTRACT FROM AUTHOR]

Common-mode voltage (CMV) is responsible for overvoltage stress to the winding insulation and bearing damage of an ac motor. High dv/dt of CMV raises leakage currents, which can cause serious problems such as motor damage and electromagnetic noise to the equipment installed near the converter. This paper proposes two modulation strategies for indirect matrix converters that substantially eliminate CMV. The first method is developed by using the suitable couple of nonzero space vectors instead of zero space vectors in the inverter stage. The maximum voltage transfer ratio of this method is unaffected and remains 0.866. The second one, which is useful for low-voltage operation, is approached by choosing the medium and the lowest positive line-to-line input voltages in the rectifier stage to generate the dc-link voltage and by placing suitable zero space vectors in the inverter stage. In the second method, the maximum voltage transfer ratio is 0.5. Both methods can mitigate the peak value to 42%. In addition, while the first method provides the same performance to the conventional method, the second method can reduce significantly the harmonic components of line-to-line output voltage. Simulation and experimental results are shown to verify the effectiveness of the proposed methods. [ABSTRACT FROM AUTHOR]

This paper presents first an overview of the well-known voltage and current dc-link converter topologies used to implement a three-phase PWM ac–ac converter system. Starting from the voltage source inverter and the current source rectifier, the basics of space vector modulation are summarized. Based on that, the topology of the indirect matrix converter (IMC) and its modulation are gradually developed from a voltage dc-link back-to-back converter by omitting the dc-link capacitor. In the next step, the topology of the conventional (direct) matrix converter (CMC) is introduced, and the relationship between the IMC and the CMCs is discussed in a figurative manner by investigating the switching states. Subsequently, three-phase ac–ac buck-type chopper circuits are considered as a special case of matrix converters (MCs), and a summary of extended MC topologies is provided, including three-level and hybrid MCs. Therewith, a common knowledge basis of the individual converter topologies is established. [ABSTRACT FROM PUBLISHER]