Search

A specific damage characterization method using Digital Image Correlation for semi-crystalline polymers is proposed for a wide range of strain rates. This damage measurement is an extension of the SEE method [16] which was developed to characterize the behaviour laws at constant strain rates of polymeric materials. This procedure is compared to the well-known damage characterization by loss of stiffness technique under quasi-static loading. In addition, an in-situ tensile test, carried out in a microtomograph, is used to observe the cavitation phenomenon in real time. The different ways used to evaluate the damage evolution are compared and the proposed technique is also suitable for measuring the ductile damage observed in semi-crystalline polymers under dynamic loading., QC 20150306

In this paper, a behaviour model for damageable elastoplastic materials reinforced with short fibres that have complex orientations is. proposed. The composite material is seen as the assembly of the matrix medium and several linear elastic fibre media. Its macroscopic behaviour is computed thanks to an additive decomposition of the state potential, with no need to implement complex methods of homogenisation. A 4th-order tensor that depends on the characteristics of each fibre medium is introduced to model the anisotropic damage of the matrix material induced by the reinforcement, as well as the progressive degradation of the fibre-matrix interface. The division of short fibres into several families means that complex distributions of orientation or random orientation can be easily modelled. The model is tested for the case of a polyamide reinforced with different contents of short-glass fibres with distributed orientations and subjected to uniaxial tensile tests in different loading directions. The comparison of the results with experimental data (extracted from the literature) demonstrates the efficiency of the model., QC 20180410

A non-associated viscoplastic model coupled with nonlocal damage under finite strain framework is developed to simulate the non-isochoric deformation and the damage process exhibiting strain-softening of a 20% mineral filled semi-crystalline polymer. The logarithmic spin tensor properties linking the Eulerian Hencky strain with the Cauchy stress is used thanks to hypoelasticity assuming the additive decomposition of the stretching into elastic and viscoplastic parts. The constitutive model with its nonlocal formulation is implemented in an efficient manner in a commercial implicit finite element code. The proposed model exhibits mesh-independent responses and is in agreement with strain evolution observed experimentally., QC 20140305

Journal Article, info:eu-repo/semantics/published

Journal Article, info:eu-repo/semantics/published

QC 20180416

This paper deals with the modelling of the behaviour of short-fibre reinforced composites. The composite is seen as an assembly of a matrix medium and of several fibre media. Each fibre medium, characterised by its own orientation of fibres and volume fraction, is considered as a one-dimensional elastic medium. The matrix material has an elastoplastic behaviour. All types of hardening laws can be considered, thanks to a valuable adaptivity of the modelling. The use of the Drucker-Prager criterion for plasticity and non-associative plasticity rules allow to deal with compressible plastic flow. Moreover, all kind of orientation of fibres, in particular random orientations and imperfect alignments, can be modelled in a simple way. The influence of the fibres' orientation on the mechanical response of a polymer matrix composite subjected to tensile/compression tests is analysed in detail. Finally, simulated behaviours of composites are compared to experimental data found in the literature., QC 20180411