Search

A large literature has documented the effects of weather on agricultural yields. However, weather not only impacts the quantity produced, but also the quality of the product. Due to data limitations, the quality effects have primarily been studied using lab experiments for specific attributes, and the financial implications for farmers of a quality effect are less clear. Using a unique longitudinal micro-level data set of Swiss apple orchards that include information on both the quantity produced as well as the quality, we show that the latter can have an even larger effect on farm revenue. Ignoring the quality of the harvested product substantially biases the impact of weather extremes on agricultural income and the potential effects of climate change. Our quality measure is the orchard-year specific price shock. If an orchard gets a lower price for its specific apple variety compared to previous years and compared to other orchards in the same year, we observe the market’s valuation of its inferior quality accounting for overall price movements (other orchards growing same variety that year) as well as orchard specific factors (orchard fixed effects). We find that spring frost events induce farm gate price drops and thus revenue reductions of up to 2.05% per hour of exposure.

Detailed diagnostic of antiproton beams at low energies is required for essentially all experiments at the Antiproton Decelerator (AD), but will be particularly important for the future Extra Low ENergy Antiproton ring (ELENA) and its keV beam lines to the different experiments. Many monitors have been successfully developed and operated at the AD, but in particular beam profile monitoring remains a challenge. A dedicated beam instrumentation and detector test stand has recently been setup at the AE g ̄ $\bar {g}$ IS experiment (Antimatter Experiment: Gravity, Interferometry, Spectroscopy). Located behind the actual experiment, it allows for parasitic use of the antiproton beam at different energies for testing and calibration. With the aim to explore and validate different candidate technologies for future low energy beam lines, as well as the downstream antihydrogen detector in AE g ̄ $\bar {g}$ IS, measurements have been carried out using Silicon strip and pixel detectors, a purpose-built secondary emission monitor and emulsions. Here, results from measurements and characterization of the different detector types with regard to their future use at the AD complex are presented.

The CLIC Test Facility 3 (CTF3) is being built and commissioned by an international collaboration to test the feasibility of the proposed Compact Linear Collider (CLIC) drive beam generation scheme. Central to this scheme is the use of RF deflectors to inject bunches into a delay loop and a combiner ring, in order to transform the initial bunch frequency of 1.5 GHz from the linac to a final bunch frequency of 12 GHz. To do so, the machine's transverse optics must be tuned to ensure beam isochronicity and each ring's length can finally be adjusted with wiggler magnets to a sub millimeter path length accuracy. Diagnostics based on optical streak camera and RF power measurements, in particular frequency bands, have been designed to measure the longitudinal behaviour of the beam during the combination. This paper presents the diagnostics and recent commissioning measurements.

The power source of the Compact Linear Collider (CLIC) relies on the generation and deceleration of a high-intensity electron drive beam. In order to provide the best radio-frequency (RF) to beam-energy transfer efficiency, the electron beam is accelerated using fully loaded RF cavities, which leads to strong beam loading effects resulting in a high-energy transient. The stability of the RF power produced by the drive beam depends on the stability of the drive beam energy and energy spread along the pulse. The control and the monitoring of the time evolution of the beam energy distribution are therefore crucial for the accelerator performance. For this purpose segmented beam dumps, which are simple and robust devices, have been designed and installed at the CLIC Test Facility 3 (CTF3). These devices are located at the end of spectrometer lines and provide horizontal beam profiles with a time resolution better than 10 ns. The segmented dumps are composed of parallel, vertical, metallic plates, and are based on the same principle as a Faraday cup: the impinging beam current is read by a fast acquisition channel. Both FLUKA and Geant4 simulations were performed to define the optimum detector geometry for beam energies ranging from 5 MeV to 150 MeV. This paper presents a detailed description of the different steps of the design: the optimization of the detector spatial resolution, the minimization of the thermal load and the long-term damage resulting from high radiation doses. Four segmented dumps are currently used in the CTF3 complex. Their measured performance and limitations are presented in this paper. Typical beam spectra as measured in the CTF3 linac are also presented along with a description of the RF manipulations needed for tuning the beam energy spectrum., Correction in: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 729, p. 963, doi: 10.1016/j.nima.2013.09.005

A silicon detector monitor has been developed and tested in the framework of the beam diagnostics development program for the HIE-ISOLDE superconducting upgrade of the REX-ISOLDE heavy-ion linac at CERN. The monitor is intended for beam energy and timing measurements aimed at the phase tuning of the superconducting cavities. Tests were performed with a stable ion beam, composed of carbon, oxygen and neon ions accelerated to energies from 300 keV/u to 2.82 MeV/u. The energy measurements performed allowed for beam spectroscopy and ion identification with a resolution of 1.4%–0.5% rms in the measured energy range. The achieved resolution is suited for a fast phase tuning of the cavities, which was demonstrated with the third REX 7-gap resonator. The time structure of the beam, characterised by a bunch period of 9.87 ns, was measured with a resolution better than 200 ps rms. This paper describes the results from all these tests and provides details of the detector set-up.

A silicon detector monitor has been developed and tested in the frame of the beam diagnostics development program for the HIE-ISOLDE superconducting upgrade of the REX-ISOLDE heavy-ion linac at CERN. The monitor is intended for beam energy and timing measurements as well as for phase scanning of the superconducting cavities. Tests have been performed with a stable ion beam, composed of carbon, oxygen and neon ions accelerated to energies from 300 keV/u to 2.85 MeV/u. The energy measurements performed allowed for beam spectroscopy and ion identification with a resolution of 1.3 % rms. The achieved resolution is suited for cavity phase scanning, which was demonstrated with the REX 7-gap resonator. The time structure of the beam, characterized by a bunch period of 9.87 ns, was measured with a resolution better than 200 ps. This paper describes the results from all these tests as well as providing details of the detector setup.

The CTF3 facility is being built and commissioned by an international collaboration in order to test the feasibility of the proposed CLIC drive beam generation scheme. Central to this scheme is the use of RF deflectors to inject bunches into a Delay Loop and a Combiner Ring, in order to transform the initial bunch spacing of 1.5 GHz from the linac to a final bunch spacing of 12 GHz. The optimization procedure relies on several steps. The active length of each ring is carefully adjusted to within a few millimeters accuracy using a two‐period undulator. The transverse optics of the machine must be set-up in a way so as to ensure the beam isochronicity. Diagnostics based on optical streak cameras and RF power measurements have been designed to measure the longitudinal behaviour of the beam during the combination. This paper presents their performance and highlights recent measurements.

Detailed diagnostic of antiproton beams at low energies is required for essentially all experiments at the Antiproton Decelerator (AD), but will be particularly important for the future Extra Low ENergy Antiproton ring (ELENA) and its keV beam lines to the different experiments. Many monitors have been successfully developed and operated at the AD, but in particular beam profile monitoring remains a challenge. A dedicated beam instrumentation and detector test stand has recently been setup at the AE g ̄ $\bar {g}$ IS experiment (Antimatter Experiment: Gravity, Interferometry, Spectroscopy). Located behind the actual experiment, it allows for parasitic use of the antiproton beam at different energies for testing and calibration. With the aim to explore and validate different candidate technologies for future low energy beam lines, as well as the downstream antihydrogen detector in AE g ̄ $\bar {g}$ IS, measurements have been carried out using Silicon strip and pixel detectors, a purpose-built secondary emission monitor and emulsions. Here, results from measurements and characterization of the different detector types with regard to their future use at the AD complex are presented.