Search

Water Injection Dredging (WID) has been successfully applied for removing sediment deposits in reservoirs, which results in an increase of their storage capacity. This dredging method is based on the fluidization of the top sediment layer by pressurized injection of water by a dredging vessel. The fluidized sediment can be transported towards the dead storage of the reservoir or sluiced out of the reservoir through the bottom outlets of a dam. This flow can either occur by gravity induced flow or especially directed by the dredging strategy of the WID vessel. This dredging technique can increase the water storage capacity of the reservoir and prevent the erosion of the river downstream, hence the sediment blockage. Recent developments in modelling and measuring tools have enabled stakeholders to design, optimize and monitor WID in reservoirs. In this paper, we will demonstrate how modelling and measuring tools can be used to evaluate alternative dredging strategies for reservoir maintenance. In particular, we show how a mid-field and far-field modelling can be applied for designing WID actions and predicting sediment plume dynamics in a given reservoir. Additionally, we will present recently-developed in-situ measuring tools, that are currently used for monitoring turbidity in a water column and sediment properties during and after WID actions. Finally, potential benefit of applying WID in Shihmen Reservoir (Taiwan) is discussed., Rivers, Ports, Waterways and Dredging Engineering

Abstract: The use of sediments as soils is an area of interest for Beneficial Use of dredged sediments. In this study the impact of the transition from sediments to soils is researched by looking at the seasonal and long year (10 year) change in pore water metal chemistry of sediments which are considered clean (class A) according to the Dutch soil directive. This study is based on a combination of geohydrological, geochemical and ecotoxicological risk models and validated against measured pore water concentrations for metals over an dry/wet period. The pore water metal concentrations are compared against standards and expressed as at Risk Characterization Ratio’s (RCR) values. The RCR values are high (> 1) during the first 3 years after the application of sediments as soil, especially at the end of the summer. The multi substances Potentially Affected Fraction (ms-PAF) shows a similar trend as the RCR values, although it takes 5 years before the combined calculated potential ecotoxicity is below the legal 40% threshold level. Translated to land use, it is advised to restrict land use for farming on soils where these clean (class A) sediments are applied for a five-year transition period. Article Highlights: Beneficial Use of sediments should take into account the different conditions when used as soils.Use of sediments as soils lead to a predicable seasonal and multiple year trend in metal concentrations in pore water.The predicted results in metal pore water concentrations are translated into an advice for temporal land use., Geoscience and Engineering

Water Injection Dredging (WID) has been successfully applied for removing sediment deposits in reservoirs, which results in an increase of their storage capacity. This dredging method is based on the fluidization of the top sediment layer by pressurized injection of water by a dredging vessel. The fluidized sediment can be transported towards the dead storage of the reservoir or sluiced out of the reservoir through the bottom outlets of a dam. This flow can either occur by gravity induced flow or especially directed by the dredging strategy of the WID vessel. This dredging technique can increase the water storage capacity of the reservoir and prevent the erosion of the river downstream, hence the sediment blockage. Recent developments in modelling and measuring tools have enabled stakeholders to design, optimize and monitor WID in reservoirs. In this paper, we will demonstrate how modelling and measuring tools can be used to evaluate alternative dredging strategies for reservoir maintenance. In particular, we show how a mid-field and far-field modelling can be applied for designing WID actions and predicting sediment plume dynamics in a given reservoir. Additionally, we will present recently-developed in-situ measuring tools, that are currently used for monitoring turbidity in a water column and sediment properties during and after WID actions. Finally, potential benefit of applying WID in Shihmen Reservoir (Taiwan) is discussed., Rivers, Ports, Waterways and Dredging Engineering

Abstract: The use of sediments as soils is an area of interest for Beneficial Use of dredged sediments. In this study the impact of the transition from sediments to soils is researched by looking at the seasonal and long year (10 year) change in pore water metal chemistry of sediments which are considered clean (class A) according to the Dutch soil directive. This study is based on a combination of geohydrological, geochemical and ecotoxicological risk models and validated against measured pore water concentrations for metals over an dry/wet period. The pore water metal concentrations are compared against standards and expressed as at Risk Characterization Ratio’s (RCR) values. The RCR values are high (> 1) during the first 3 years after the application of sediments as soil, especially at the end of the summer. The multi substances Potentially Affected Fraction (ms-PAF) shows a similar trend as the RCR values, although it takes 5 years before the combined calculated potential ecotoxicity is below the legal 40% threshold level. Translated to land use, it is advised to restrict land use for farming on soils where these clean (class A) sediments are applied for a five-year transition period. Article Highlights: Beneficial Use of sediments should take into account the different conditions when used as soils.Use of sediments as soils lead to a predicable seasonal and multiple year trend in metal concentrations in pore water.The predicted results in metal pore water concentrations are translated into an advice for temporal land use., Geoscience and Engineering

In the light of challenges raised by a changing climate and increasing population pressure in coastal regions, it has become clear that theoretical models and scattered experiments do not provide the data we urgently need to understand coastal conditions and processes. We propose a Dutch coastline observatory named ICON.NL, based at the Delfland Coast with core observations focused on the internationally well-known Sand Engine experiment, as part of an International Coastline Observatories Network (ICON). ICON.NL will cover the physics and ecology from deep water to the dunes. Data will be collected continuously by novel remote sensing and in-situ sensors, coupled to numerical models to yield unsurpassed long-term coastline measurements. The combination of the unique site and ambitious monitoring design enables new avenues in coastal science and a leap in interdisciplinary research.