Search

Purpose: Compulsory airtightness testing was introduced for new dwellings in England and Wales in 2006 and in Scotland in 2010 to ensure that they are constructed according to design air permeability targets. These targets are set to limit heat loss through air infiltration. Previous work examining the large Air Tightness Testing and Measurement Association (ATTMA) data set of UK airtightness test data suggested that, in a proportion of dwellings, the targets were being met by post-completion sealing as opposed to airtight construction, but did not quantify the prevalence of this practice. The paper aims to discuss this issue. Design/methodology/approach: In this paper, the distribution of as-built airtightness and the proportion of dwellings undergoing post-completion sealing are estimated from the ATTMA data set covering 2015–2016. This is carried out by Bayesian statistical modelling, using the data set of recorded test results and a modelled representation of the testing process. Findings: This analysis finds the mode of the as-built distribution of air permeability as 4.38 ± 0.01 m3/m2h. It predicts that 39 per cent of dwellings aiming for one of the five most common design targets have sealing interventions at the point of pressure testing to meet their target. The as-built distribution of the ATTMA data is compared to airtightness test data obtained from just before compulsory testing was introduced, showing an improvement in the modal air permeability of 3.6 m3/m2h since testing became mandatory. Originality/value: This paper has investigated the available data beyond simply what is reported, to estimate what the real levels of airtightness in the UK new build stock may be.

Purpose: Millions of properties have suspended timber ground floors globally, with around ten million in the UK alone. However, it is unknown what the floor void conditions are, nor the effect of insulating such floors. Upgrading floors changes the void conditions, which might increase or decrease moisture build-up and mould and fungal growth. The purpose of this paper is to provide a review of the current global evidence and present the results of in situmonitoring of 15 UK floor voids. Design/methodology/approach: An extensive literature review on the moisture behaviour in both uninsulated and insulated suspended timber crawl spaces is supplemented with primary data of a monitoring campaign during different periods between 2012 and 2015. Air temperature and relative humidity sensors were placed in different floor void locations. Where possible, crawl spaces were visually inspected. Findings: Comparison of void conditions to mould growth thresholds highlights that a large number of monitored floor voids might exceed the critical ranges for mould growth, leading to potential occupant health impacts if mould spores transfer into living spaces above. A direct comparison could not be made between insulated and uninsulated floors in the sample due to non-random sampling and because the insulated floors included historically damp floors. The study also highlighted that long-term monitoring over all seasons and high-resolution monitoring and inspection are required; conditions in one location are not representative of conditions in other locations. Originality/value: This study presents the largest UK sample of monitored floors, evaluated using a review of current evidence and comparison with literature thresholds.