Search

Millions of people worldwide suffer from musculoskeletal damage, thus using the largest proportion of rehabilitation services. The limited self-regenerative capacity of bone and cartilage tissues necessitates the development of functional biomaterials. Magnetoactive materials are a promising solution due to clinical safety and deep tissue penetration of magnetic fields (MFs) without attenuation and tissue heating. Herein, electrospun microfibrous scaffolds were developed based on piezoelectric poly(3-hydroxybutyrate) (PHB) and composite magnetic nanofillers [magnetite with graphene oxide (GO) or reduced GO]. The scaffolds’ morphology, structure, mechanical properties, surface potential, and piezoelectric response were systematically investigated. Furthermore, a complex mechanism of enzymatic biodegradation of these scaffolds is proposed that involves (i) a release of polymer crystallites, (ii) crystallization of the amorphous phase, and (iii) dissolution of the amorphous phase. Incorporation of Fe3O4, Fe3O4–GO, or Fe3O4–rGO accelerated the biodegradation of PHB scaffolds owing to pores on the surface of composite fibers and the enlarged content of polymer amorphous phase in the composite scaffolds. Six-month biodegradation caused a reduction in surface potential (1.5-fold) and in a vertical piezoresponse (3.5-fold) of the Fe3O4–GO scaffold because of a decrease in the PHB β-phase content. In vitroassays in the absence of an MF showed a significantly more pronounced mesenchymal stem cell proliferation on composite magnetic scaffolds compared to the neat scaffold, whereas in an MF (68 mT, 0.67 Hz), cell proliferation was not statistically significantly different when all the studied scaffolds were compared. The PHB/Fe3O4–GO scaffold was implanted into femur bone defects in rats, resulting in successful bone repair after nonperiodic magnetic stimulation (200 mT, 0.04 Hz) owing to a synergetic influence of increased surface roughness, the presence of hydrophilic groups near the surface, and magnetoelectric and magnetomechanical effects of the material.

The results of comprehensive research on the thermal behavior and molecular and crystalline structures of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB-HV) films of different thicknesses, their molecular weights (Mw) and 3-hydroxyvalerate (3-HV) contents are reported. Increasing film thickness from 30 to 100 µm resulted in an isotropic crystal orientation, reducing the crystallite size of the orthorhombic α-phase in the bdirection from 22 to 17 nm and increasing the degree of crystallinity of the PHB films without affecting their thermal behavior. Furthermore, despite resulting in the same degree of crystallinity and roughness, an ~8-fold decrease in PHB Mwfrom 803 kDa to 102 kDa resulted in a decreased number of piezoactive domains. The addition of 5.9% 3-HV resulted in anisotropy in the PHB crystalline structure and increased D(020)from 19 nm to 24 nm. Additionally, a further increase in the 3-HV content to 17.5% in the PHB-HV films led to a decrease in the melting temperature and a decrease in the degree of crystallinity from 57% to 23%, which resulted in the absence of local piezoresponse. Notably, the decrease in the Mwof PHB-HV (~17%) from 1177 kDa to 756 kDa resulted in an increase in the degree of crystallinity from 23% to 32%. Moreover, the PHB-HV films became smoother with increasing 3-HV content.