Search

This paper deals with nonlinear control of a single-phase half-bridge interleaved buck shunt active power filter (HBIB-SAPF) with a nonlinear load. The control objective for the system is twofold: performing power factor correction by compensating for harmonics and reactive current consumed by the nonlinear load from one hand and tightly regulating the HBIB converter DC capacitor voltage. Both objectives are accomplished using a two-loop nonlinear controller. The inner loop acts on the switching devices so that the active filter current tracks its reference with the aim of ensuring a unity power factor. This loop is tackled using backstepping technique and Lyapunov approach. The outer loop is responsible for regulating the DC capacitor voltage to its desired value, using a PI controller with a pre-filter. The stability analysis of the closed-loop system is formally performed by using the averaging theory. The validity of the designed nonlinear controller is checked by simulations in Matlab/SimpowerSystem showing its robustness and accuracy under various operating conditions. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new scheme to directly power a 4.9–5.6GHz LC oscillator from a recursive switched-capacitor DC-DC converter. A finite-state machine is integrated to automatically adjust the conversion ratio and switching frequency of the converter such that its DC output voltage is within ±5% of the desired 1V across input voltage range 1.3–2.2V and < 2mA load current conditions. A gate-driver circuit is embedded in each switch of the converter to guarantee constant on-resistance across PVT variations without sacrificing device reliability. Furthermore, a spur reduction block (SRB) is embedded in the oscillator to suppress the ripple induced spurs by stabilizing its tail current. Both the converter and the oscillator are implemented in 40-nm CMOS technology. The measured peak power efficiency of the converter is 87%, while its spot noise is < 1.5nV/ $\sqrt {\mathrm{ Hz}}$ , which does not degrade the phase noise of the oscillator. The SRB suppresses the spur to < −65dBc under the 30mVpp ripple of the converter. [ABSTRACT FROM AUTHOR]

This paper presents a study of compact multiple-output switched-capacitor voltage regulators (MOSCVRs). Two methods to produce multiple outputs with an SCVR and their effects on performance – power efficiency and cross-regulation, are examined with output impedance analysis. Moreover, to help a circuit designer to implement a compact MOSCVR, a design method to determine the number of outputs and their conversion ratios is also proposed in this work. To verify this method, we demonstrate the design of an example compact MOSCVR. The MOSCVR is capable of simultaneously producing four different output voltages from a single input power supply with only two flying capacitors and twelve switches. The study presented in this work provides not only comprehensive insight but also guidance to find the suitable topology of a compact MOSCVR. [ABSTRACT FROM AUTHOR]

This paper proposes a LLC type resonant forward converter using adjustable turning-off time control for low power and voltage applications. The new circuit is derived from the conventional LLC converter, and it has simple structure while maintaining decent soft-switching characteristics. The switching losses are reduced by ZVS (zero voltage switching) and ZCS (zero current switching). Also, regulation of the output voltage does not require a small ratio between magnetizing inductor and resonant inductor, so the leakage inductor of transformer can be utilized instead of an external inductor to realize resonance, which makes it possible to use only one magnetic component in the resonant topology. Besides, the adjustable turning-off time control strategy is adopted in the scheme, which optimizes the switching condition while ensuring the wide range operation. In comparison to the traditional PWM (pulse width modulation) control, the proposed control strategy can further reduce the switching loss and improve power efficiency. This is also suitable for the utilization of GaN (gallium nitride) devices due to the requirement of higher switching frequencies at wide input applications. In addition to the detailed theoretical analysis, the validity of the proposed concept is confirmed by the experimental results of a prototype. [ABSTRACT FROM AUTHOR]

In this paper, the proposed topology of a fully automated control (FAC) battery charger that provides turbo-boost operation and fully automated detection without any feedback from the system is discussed. It uses closed-loop control for automatic system load detection and automatically adjusts the battery discharge current. The advantages include shortened battery discharge time and maximum power provided by the adapter. Therefore, the FAC technique is flexible for any load system that is limited to battery chargers with the turbo boost mode support. In addition, to avoid over discharge, a battery protection circuitry is also included. The test chip is fabricated using a 0.25- $\mu \text{m}$ CMOS process, with a maximum efficiency of 94.58% when the charger operates in the turbo boost mode, and achieves 97% maximum efficiency when the charger operates in buck charge mode. [ABSTRACT FROM AUTHOR]

The recently-proposed dual-frequency single-inductor multiple-output (DF-SIMO) buck converter topology is a promising approach for enabling the implementation of multiple fully-integrated power supplies with superior dynamic and cross-regulation performance in SoCs. However, switching the input and output stages at different frequencies raises many questions about the optimum strategy for controlling such converter topology. This paper explores and analyzes the various classes of controllers that can be employed in the output stage of the DF-SIMO buck converter topology, while taking account of key comparison metrics, such as circuit complexity, stability, steady-state and dynamic performance, and the range of operating conditions each controller may be suitable for. This includes average-based voltage-mode, ripple-based charge-mode, and ripple-based voltage-mode controllers. The predictions made by the analytical expressions derived for the various controllers are verified through system-level and transistor-level circuit simulations. [ABSTRACT FROM AUTHOR]

Low-power circuits often employ dynamic voltage scaling and energy harvesting. Such circuits need a power management unit that can convert the voltage source to a wide range of target voltages with high efficiency. Targeting such a power management unit, this paper presents a reconfigurable architecture of switched capacitor (SC) voltage converter. It introduces a design optimization methodology that can determine trade-off among design parameters to meet the goal. The proposed converter employs a reconfigurable topology with four capacitors. It provides 11 conversion ratios: 6 step-down and 5 step-up ratios supporting wide input/output voltage range. An analytical model for the output impedance of the proposed reconfigurable SC topology is presented. Using the model, the proposed optimization methodology can minimize the total power dissipation. To validate the proposed architecture and optimization methodology, the converter has been implemented in a 130-nm CMOS process using integrated capacitors of total size 2.2 nF. Simulation results show that the optimized converter circuit achieves an efficiency range from 83.41% to 74.69% for a load current of $100~\mu \text{A}$. [ABSTRACT FROM AUTHOR]

A pair of universal current mode control schemes for charging a Li-ion battery for mobile applications are discussed in this paper. The peak-current mode control schemes, based on a single control loop, is universal because it is designed with a single-stage buck charger for both a conventional wall adapter dc source as well as a solar photovoltaic (PV) module of comparable specifications. The charging schemes remove the need for an extra MPPT (maximum power point tracking) power converter stage. This control scheme is non-linear and incorporates all possible scenarios: mode of operation of a battery, current charging rate and power characteristic of input source. The algorithm uses need-based MPPT and ensures minimal battery discharge, and also uses minimum number of sense variables in the circuit. The methods differ in the way MPPT is implemented: perturb and observe (P&O) and fractional open circuit voltage. Simulation results demonstrating battery charge profile, validity of the algorithm under varying insolation conditions and platform workloads are presented, along with a discussion of the trade-offs of the two methods. Proof-of-concept hardware results are also provided. [ABSTRACT FROM AUTHOR]

The general structure of a multilevel multistate dc–dc converter is introduced, which is a hybrid between inductor-based (buck) converters and capacitor-based (switched capacitor) converters. The control of the new converter is hybrid between switched capacitor converters and buck converters, where the coarse tuning of the output voltage is achieved through the selection of an appropriate operating region similar to an SC converter, while fine tuning is achieved through the adjustment of a duty cycle value similar to a buck converter. A silicon implementation of a four-level four-state hybrid converter is presented as a specific example of the general hybrid converter structure. A new state interleaving technique was employed resulting in an increased effective switching frequency of the converter. Silicon measurements of the integrated four-level four-state converter on a 65-nm GF technology show that the converter can cover a wide range of output voltage values achieving a peak efficiency of 93% with a power density of 47 mW/mm2. The implemented converter attains a response time in the sub- ${\mu }\text{s}$ range with output voltage ripples below 50 mV. [ABSTRACT FROM AUTHOR]