Search

Transient stability of a power system can be significantly affected by wind power generators due to their stochastic power output and complex dynamic characteristics. This paper proposes a robust optimization approach for coordinating generation dispatch and emergency load shedding against transient instability under uncertain wind power output. The problem is modelled as a two-stage robust optimization (TSRO) model considering transient stability constraints, where the first-stage is to optimize the generation dispatch (preventive control) before a contingency and the second-stage decision is the emergency load shedding (emergency control) after the contingency occurrence under the worst case of wind power variation. To solve this TSRO problem, this paper also proposes a solution algorithm which integrates transient stability assessment and transient stability constraint construction in a column and constraint generation framework. The proposed method is validated on the New-England 39-bus system and the Nordic32 system, which shows high computational efficiency and stability robustness against uncertain wind power. [ABSTRACT FROM AUTHOR]

The automatic generation control (AGC) system is temporally situated between economic dispatch and synchronous generator dynamics, and its primary role is to regulate frequency within and tie-line flows between control areas. Given appropriate choice of participation factors (feed-forward controller gains that govern the disaggregation of the area-level power requirement to individual generators), the AGC can be engineered to nudge system dynamics toward a steady-state operating point corresponding to economic optimality. This paper establishes necessary and sufficient conditions under which a widely accepted choice of participation factors guarantees the alignment of steady-state synchronous generator outputs with a global minimum of a prototypical economic dispatch problem. In so doing, it resolves several ambiguities and formalizes technical assumptions governing the role of the standard AGC architecture in the context of economic dispatch and steady-state operation. Numerical case studies tailored to a modified version of the New England 39-bus 10-machine test system validate the theoretical results. [ABSTRACT FROM AUTHOR]

Globally,wind power plants (WPPs) installations are dramatically increasing, leading to a large-scale integration into the power grids. Huge endeavors are devoted to achieving an efficient operation of WPPs. This paper offers a novel chaotic-billiards optimizer (C-BO) algorithm to properly design the fuzzy logic control (FLC) strategy for stability enhancement of grid-integrated WPPs. The C-BO algorithm has distinct features such as simple construction, low numbers of parameters required to design, high convergence speed, and low computational burden. The permanent-magnet synchronous generator (PMSG)-based WPP is interlinked into the electric power grid through power converters. A cascaded FLC approach, which is optimally fine-tuned by the C-BO, is offered as the control methodology for these converters. The C-BO algorithm fine-tunes the gain factors of multiple FLCs at a rapid convergence speed. A simulation-based optimization approach is applied, in which the integrated square error criterion is chosen as an objective function. For the sake of preciseness, the PMSG-based WPP is connected to the IEEE 39-bus New England test system. The effectiveness of the optimal FLC using the C-BO algorithm is compared with that achieved using the water cycle algorithm-based optimal FLC, the genetic algorithm-based optimal FLC, and the marine predator algorithm-based optimal proportional-integral controller, taking into account severe grid disturbances. Moreover, real wind speed measured data captured from Zaafarana Station in Egypt are extensively performed in the system studies. The validity of the offered control approach is widely verified by the simulation analyses using the MATLAB/Simulink environment. [ABSTRACT FROM AUTHOR]

This paper derives in analytical closed form the feasible pole-placement region of the synchronverter active-power loop (APL) so as to eliminate all trial-and-error effort in parameter tuning. We consider the well-established setting of a reduced third-order APL model with two controller parameters that can be tuned freely. Thus, only two of the three APL poles can be specified independently in hopes of achieving desired system dynamics. Central to the presented derivation is the realization that the two specified poles must represent the dominant mode of the system. Otherwise the actual system dynamics may be dictated by the third unspecified pole, leading to unexpected or undesired dynamic behaviour. Numerical simulations involving the full-order synchronverter dynamical model and a modified New England 39-bus test system validate the analysis and the resulting region within which poles must be placed for actual system dynamics to match desired ones. [ABSTRACT FROM AUTHOR]

Appropriately designed renewable support policies can play a leading role in promoting renewable expansions and contribute to low emission goals. Meanwhile, ill-designed policies may distort electricity markets, put power utilities and generation companies on an unlevel playing field and, in turn, cause inefficiencies. This paper proposes a framework to optimize policymaking for renewable energy sources, while incorporating conflicting interests and objectives of different stakeholders. We formulate a tri-level optimization problem where each level represents a different entity: a state regulator, a power utility and a wholesale electricity market. To solve this tri-level problem, we exploit optimality conditions and develop a modification of the Column-and-Cut Generation (C&CG) algorithm that generates cuts for bilinear terms. The case study based on the ISO New England 8-zone test system reveals different policy trade-offs that policymakers face under different decarbonization goals and implementation scenarios. [ABSTRACT FROM AUTHOR]

Distance relays are quite vulnerable to maloperation during dynamic stressed situations. The apparent impedance seen by the relay encroaches the zone-3 resulting in distance relay maloperation that can initiate cascading failures. This paper presents an enhanced scheme for wide area backup protection which implements improved protection algorithms to decide final relaying status. A machine learning tool namely Deep Neural Network is utilized to build those protective relaying decision logics: RDL-1 and RDL-2. Wide area information retrieved from phasor measurement units (PMU) is used to take real time decisions. RDL-1 is designed to detect if the system is operating in normal or stressed condition. During normal state, traditional zone-3 relay undertakes the relaying decision. However, under stressed situations, RDL-1 switches the decision-taking to RDL-2. RDL-1 also predicts whether the system is progressing towards an out-of-step situation so that appropriate remedial action can be undertaken. Proposed scheme was studied on IEEE-39 bus New England system using MATLAB/SIMULINK and validated on Real Time Digital Simulator platform and third zone mal-tripping are avoided. Performance of the proposed algorithm was compared with the conventional blinder and other data-mining techniques which show considerably high classification accuracy. [ABSTRACT FROM AUTHOR]

To analyze the grid integration effect of a virtual synchronous generator (VSG), this paper proposes a simple power system modeling method. It is shown that for a specific disturbance, by simplifying the original network to a radical n generators single-load model, its state-space small-signal model can be obtained using a unified formula, as long as the single generator infinite bus model of each generator is given. Case studies based on the IEEE 9-bus test system as well as the New York New England test system show high efficiency of the proposed modeling to represent slow power and frequency deviations. Modal analyses give insight into how system poles are synthesized by individual generator poles, and how different designs of VSGs affect the system oscillation modes. Potential errors due to the topology simplification and the measures to avoid them are discussed. The time-domain results and modal analyses highlight some important features of VSG, which are overlooked in previous studies. [ABSTRACT FROM AUTHOR]

Due to global climate change, the effect of extreme weather on power systems has attracted extensive attention. In the prior-art grid resilience studies, the hurricanes or wildfires are mainly defended in terms of expected line damages, while they are prone to trigger short-circuit fault (SCF) evolved with dynamic influence in reality. In this paper, a fragile model is developed to evaluate the nodal SCF probability considering the insulation aging of equipment and extreme weather condition. Then, a response framework for extreme weather events is developed for a transmission system to defend the cascading impacts of expected SCFs. Specifically, switches are shifted to restrain the out-of-range short-circuit currents (SCCs) so that to ensure the SCFs can be removed by circuit breakers, generation rescheduling and load shedding are arranged to maintain the post-fault system transient stability. The above measures are optimized simultaneously by an integrated Mixed-Integer Nonlinear Programming (MINLP). Considering the error or uncertainty of weather event forecasts, a multi-state model is established to provide the most cost-effective grid resilience enhancement scheme, in which the expected urgent adaptions of the initial scheme subject to weather state transition is included in the overall cost. The proposed model and techniques are validated using the IEEE 39-bus New-England test system and realistic meteorological data. [ABSTRACT FROM AUTHOR]

In this work we present a novel technique, based on a trust-region optimization algorithm and second-order trajectory sensitivities, to compute the extreme trajectories of power system dynamic simulations given a bounded set that represents parametric uncertainty. We show how this method, while remaining computationally efficient compared with sampling-based techniques, overcomes the limitations of previous sensitivity-based techniques to approximate the bounds of the trajectories when the local approximation loses validity because of the nonlinearity. We present several numerical experiments that showcase the accuracy and scalability of the technique, including a demonstration on the IEEE New England test system. [ABSTRACT FROM AUTHOR]

The dc voltage and frequency $ (PVF)$ or modified dc voltage and frequency $ (PV^{2}F)$ double droop control is commended for its ability to regulate both the dc voltage and the frequency in a decentralized approach. However, a convincing response is not achieved due to an interaction between the droop characteristics of dc voltage and frequency. This interaction affects the dc voltage and frequency support of the ac-system-surrounded multiterminal HVdc (AC-MTdc) grid. To overcome this effect, a Duo control strategy is proposed in this article, which takes advantage of a bipolar voltage-source converter topology in the MTdc grid. The virtue of the proposed control technique is emphasized by comparing it with the existing $ PV^{2}F$ double droop control along with three case studies and two test systems. The validation of the interactionless Duo control strategy is carried out on a five-terminal CIGRE dc grid benchmark model integrated into a two-area power system (AC-MTdc grid-1) and a New England IEEE 39-bus system (AC-MTdc grid-2). These test systems are simulated in PSCAD/EMTdc software. [ABSTRACT FROM AUTHOR]

We propose a Koopman operator-based surrogate model for propagating parameter uncertainties in power system nonlinear dynamic simulations. First, we augment a priori known state-space model by reformulating parameters deemed uncertain as pseudo-state variables. Then, we apply the Koopman operator theory to the resulting state-space model and obtain a linear dynamical system model. This transformation allows us to analyze the evolution of the system dynamics through its Koopman eigenfunctions, eigenvalues, and modes. Of particular importance for this letter, the obtained linear dynamical system is a surrogate that enables the evaluation of parameter uncertainties by simply perturbing the initial conditions of the Koopman eigenfunctions associated with the pseudo-state variables. Simulations carried out on the New England test system reveal the excellent performance of the proposed method in terms of accuracy and computational efficiency. [ABSTRACT FROM AUTHOR]

With a high proportion of new energy and power electronic equipment connected to the modern power system, a new type of subsynchronous oscillation (SSO) is triggered, which affects the safe and stable operation of the system. Accurate analysis and identification of the SSO source becomes the key to studying this problem. This article presents a novel method to analyze SSOs. First, multisynchrosqueezing transform is applied to the signal to get the concentrated time–frequency analysis results. Then, the ridge tracking method is utilized to identify and reconstruct the subsynchronous component signals. The method of dissipating energy flow is applied to locate the source and sink of the SSO in the subsynchronous component signals. The performances of the proposed method are verified using electromagnetic transient simulations in a three-wind farms system and a modified IEEE 10-generator 39-bus New England power system. [ABSTRACT FROM AUTHOR]

We propose an analytically tractable Bayesian method to infer parameters in power system dynamic models from noisy measurements of bus-voltage magnitudes and frequencies as well as active- and reactive-power injections. The proposed method is computationally appealing as it bypasses the large number of system model simulations typically required in sampling-based Bayesian inference. Instead, it relies on analytical linearization of the nonlinear system differential-algebraic-equation model enabled by trajectory sensitivities. Central to the proposed method is the construction of a linearized model with the maximum probability of being (closest to) the actual nonlinear model that gave rise to the measurement data. The linear model together with Gaussian prior leads to a conjugate family where the parameter posterior, model evidence, and their gradients can be computed in closed form, markedly improving scalability for large-scale power systems. We illustrate the effectiveness and key features of the proposed method with numerical case studies for a three-bus system. Algorithmic scalability is then demonstrated via case studies involving the New England 39-bus test system. [ABSTRACT FROM AUTHOR]

This letter proposes an online control strategy to enhance the overall damping of low-frequency power system oscillations of large inter-connected electrical networks. To achieve this objective, the proposed approach employs wide area measured signals to estimate an accurate online model of power system dynamics using the dynamic mode decomposition with control (DMDc) method. The DMDc technique applies singular value decomposition (SVD) to the collected data matrices such that an accurate low-order approximation of system dynamics is obtained. The estimated model is thereafter utilized in designing the wide area damping controller (WADC) using discrete linear quadratic regulator (DLQR). Furthermore, kalman filtering is deployed to update the states of the designed controller and to remove the noise that is contained in the measured signals. The effectiveness of the proposed method is tested on the 10 machines, 39-bus New England test system. [ABSTRACT FROM AUTHOR]