Search

In this paper, a low-temperature co-fired ceramic (LTCC) diplexer is presented with compact size and high isolation. By using the common stub-loaded resonator shared by two channel filters, combining and matching networks are eliminated and only three resonators are used to design the two second-order channel filters, resulting in simple structure and miniaturized size. A novel transmission path is utilized to not only realize the higher channel filter but also prevent the signal at the lower frequency band. And a specific coupling region is selected to simultaneously realize the coupling strength required by lower channel filter and a transmission zero at higher-band frequency. In this way, each channel filter can generate a transmission zero at the passband frequency of the other channel filter, resulting in high isolation. Moreover, the bandwidths and center frequencies of the two channel filters can be individually controlled due to the design flexibility of the multilayer LTCC structure. For demonstration, a diplexer operating at 3.5 and 5.5 GHz is fabricated. The core circuit has the compact size of 1.9 mm $\times1.7$ mm \times2$ mm or 0.054~\lambda _{g} \times 0.048 \lambda _{g} \times 0.057~\lambda _{g} . Within the 3-dB passbands of the lower and higher channel filters, the measured isolation levels are better than 40 and 45 dB, respectively. [ABSTRACT FROM PUBLISHER]

This paper presents a dual-polarized patch antenna with quasi-elliptic bandpass responses. The proposed antenna is mainly composed of a feeding network, a driven patch, and a stacked patch, with its entire height being $0.09\lambda $ . The feeding network consists of two orthogonal H-shaped lines that coupled to the driven patch, each for one polarization. The elaborately-designed feeding lines not only ensure a sharp roll-off rate at the lower band edge, but also help to achieve low cross polarization and high isolation between two feeding ports. On the other hand, the upper stacked patch provides improved suppression levels at the upper stopband and also an enhanced gain within passband. Consequently, a compact dual-polarized antenna with satisfying filtering performance is obtained, without using extra filtering circuits. For demonstration, an antenna is designed to fit the specification of LTE band (2.49–2.69 GHz). The implemented antenna achieves an average a gain of 9 dBi, a cross-polarization ratio of 29 dB, an isolation of 35 dB within LTE band. The out-of-band suppression level is more than 40 dB within the 2G and 3G frequency bands from 1.71–2.17 GHz. It can be used as the antenna elements in multiband base station antenna arrays to reduce the mutual coupling. [ABSTRACT FROM PUBLISHER]