Search

When the delay period of the Zak-OTFS carrier is greater than the delay spread of the channel, and the Doppler period of the carrier is greater than the Doppler spread of the channel, the effective channel filter taps can simply be read off from the response to a single pilot carrier waveform. The input-output (I/O) relation can then be reconstructed for a sampled system that operates under finite duration and bandwidth constraints. We introduce a framework for pilot design in the delay-Doppler (DD) domain which makes it possible to support users with very different delay-Doppler characteristics when it is not possible to choose a single delay and Doppler period to support all users. The method is to interleave single pilots in the DD domain, and to choose the pilot spacing so that the I/O relation can be reconstructed by solving a small linear system of equations., Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

The Zak-OTFS input/output (I/O) relation is predictable and non-fading when the delay and Doppler periods are greater than the effective channel delay and Doppler spreads, a condition which we refer to as the crystallization condition. The filter taps can simply be read off from the response to a single Zak-OTFS pilot pulsone, and the I/O relation can be reconstructed for a sampled system that operates under finite duration and bandwidth constraints. In previous work we had measured BER performance of a baseline system where we used separate Zak-OTFS subframes for sensing and data transmission. In this Letter we demonstrate how to use turbo signal processing to match BER performance of this baseline system when we integrate sensing and communication within the same Zak-OTFS subframe. The turbo decoder alternates between channel sensing using a noise-like waveform (spread pulsone) and recovery of data transmitted using point pulsones., Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible. arXiv admin note: text overlap with arXiv:2404.04182

Energy is a primary constraint in processor design, and much of that energy is consumed in on-chip communication. Communication can be intra-core (e.g., from a register file to an ALU) or inter-core (e.g., over the on-chip network). In this paper, we use the on-chip network (OCN) as a case study for saving on-chip communication energy. We have identified a new way to reduce the OCN's link energy consumption by using line coding, a longstanding technique in information theory. Our line codes, called Low-Energy Line Codes (LELCs), reduce energy by reducing the frequency of voltage transitions of the links, and they achieve a range of energy/performance trade-offs.

The Zak-OTFS input/output (I/O) relation is predictable and non-fading when the delay and Doppler periods are greater than the effective channel delay and Doppler spreads, a condition which we refer to as the crystallization condition. When the crystallization condition is satisfied, we describe how to integrate sensing and communication within a single Zak-OTFS subframe by transmitting a pilot in the center of the subframe and surrounding the pilot with a pilot region and guard band to mitigate interference between data symbols and pilot. At the receiver we first read off the effective channel taps within the pilot region, and then use the estimated channel taps to recover the data from the symbols received outside the pilot region. We introduce a framework for filter design in the delay-Doppler (DD) domain where the symplectic Fourier transform connects aliasing in the DD domain (predictability of the I/O relation) with time/bandwidth expansion. The choice of pulse shaping filter determines the fraction of pilot energy that lies outside the pilot region and the degradation in BER performance that results from the interference to data symbols. We demonstrate that Gaussian filters in the DD domain provide significant improvements in BER performance over the sinc and root raised cosine filters considered in previous work. We also demonstrate that, by limiting DD domain aliasing, Gaussian filters extend the region where the crystallization condition is satisfied. The Gaussian filters considered in this paper are a particular case of factorizable pulse shaping filters in the DD domain, and this family of filters may be of independent interest., Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

The Zak-OTFS input/output (I/O) relation is predictable and non-fading when the delay and Doppler periods are greater than the effective channel delay and Doppler spreads, a condition which we refer to as the crystallization condition. The filter taps can simply be read off from the response to a single Zak-OTFS point (impulse) pulsone waveform, and the I/O relation can be reconstructed for a sampled system that operates under finite duration and bandwidth constraints. Predictability opens up the possibility of a model-free mode of operation. The time-domain realization of a Zak-OTFS point pulsone is a pulse train modulated by a tone, hence the name, pulsone. The Peak-to-Average Power Ratio (PAPR) of a pulsone is about $15$ dB, and we describe a general method for constructing a spread pulsone for which the time-domain realization has a PAPR of about 6dB. We construct the spread pulsone by applying a type of discrete spreading filter to a Zak-OTFS point pulsone. The self-ambiguity function of the point pulsone is supported on the period lattice ${\Lambda}_{p}$, and by applying a discrete chirp filter, we obtain a spread pulsone with a self-ambiguity function that is supported on a rotated lattice ${\Lambda^*}$. We show that if the channel satisfies the crystallization conditions with respect to ${\Lambda^*}$ then the effective DD domain filter taps can simply be read off from the cross-ambiguity between the channel response to the spread pulsone and the transmitted spread pulsone. If, in addition, the channel satisfies the crystallization conditions with respect to the period lattice ${\Lambda}_{p}$, then in an OTFS frame consisting of a spread pilot pulsone and point data pulsones, after cancelling the received signal corresponding to the spread pulsone, we can recover the channel response to any data pulsone.

Orthogonal Time Frequency Space (OTFS) is a framework for communications and active sensing that processes signals in the delay-Doppler (DD) domain. It is informed by 6G propagation environments, where Doppler spreads measured in kHz make it more and more difficult to estimate channels, and the standard model-dependent approach to wireless communication is starting to break down. We consider Zak-OTFS where inverse Zak transform converts information symbols mounted on DD domain pulses to the time domain for transmission. Zak-OTFS modulation is parameterized by a delay period $\tau_{p}$ and a Doppler period $\nu_{p}$, where the product $\tau_{p}\nu_{p}=1$. When the channel spread is less than the delay period, and the Doppler spread is less than the Doppler period, the Zak-OTFS input-output relation can be predicted from the response to a single pilot symbol. The highly reliable channel estimates concentrate around the pilot location, and we configure low-density parity-check (LDPC) codes that take advantage of this prior information about reliability. It is advantageous to allocate information symbols to more reliable bins in the DD domain. We report simulation results for a Veh-A channel model where it is not possible to resolve all the paths, showing that LDPC coding extends the range of Doppler spreads for which reliable model-free communication is possible. We show that LDPC coding reduces sensitivity to the choice of transmit filter, making bandwidth expansion less necessary. Finally, we compare BER performance of Zak-OTFS to that of a multicarrier approximation (MC-OTFS), showing LDPC coding amplifies the gains previously reported for uncoded transmission., Comment: 7 pages (double column), 6 figures, accepted at 2024 IEEE International Conference on Communications (ICC)

Magnetic recording devices are still competitive in the storage density race thanks to new technologies such as two-dimensional magnetic recording (TDMR). Error-prone patterns where a bit is surrounded by complementary bits at the four positions with Manhattan distance $1$ on the TDMR grid are called plus isolation (PIS) patterns. Recently, we introduced optimal plus LOCO (OP-LOCO) codes that prevent these patterns from being written. However, as the device ages, error-prone patterns where a bit is surrounded by complementary bits at only three positions with Manhattan distance $1$ emerge, and we call these incomplete PIS (IPIS) patterns. In this paper, we present capacity-achieving codes that forbid both PIS and IPIS patterns in TDMR systems with wide read heads. We collectively call these patterns rotated T isolation (RTIS) patterns, and we call the new codes optimal T LOCO (OT-LOCO) codes. We analyze OT-LOCO codes and derive their encoding-decoding rule. Simulation results demonstrate that OT-LOCO codes entirely eliminate media noise at practical TD densities. We suggest using OP-LOCO codes early in the device lifetime, then reconfiguring to OT-LOCO codes later on. Moreover, we introduce another coding scheme to remove RTIS patterns which offers lower complexity, lower error propagation, and track separation., Comment: 27 pages (single column), 12 figures, submitted to the IEEE Transactions on Information Theory (TIT)

Spatially-coupled (SC) codes is a class of convolutional LDPC codes that has been well investigated in classical coding theory thanks to their high performance and compatibility with low-latency decoders. We describe toric codes as quantum counterparts of classical two-dimensional spatially-coupled (2D-SC) codes, and introduce spatially-coupled quantum LDPC (SC-QLDPC) codes as a generalization. We use the convolutional structure to represent the parity check matrix of a 2D-SC code as a polynomial in two indeterminates, and derive an algebraic condition that is both necessary and sufficient for a 2D-SC code to be a stabilizer code. This algebraic framework facilitates the construction of new code families. While not the focus of this paper, we note that small memory facilitates physical connectivity of qubits, and it enables local encoding and low-latency windowed decoding. In this paper, we use the algebraic framework to optimize short cycles in the Tanner graph of 2D-SC hypergraph product (HGP) codes that arise from short cycles in either component code. While prior work focuses on QLDPC codes with rate less than 1/10, we construct 2D-SC HGP codes with small memories, higher rates (about 1/3), and superior thresholds., Comment: 26 pages, 7 figures

Low-density parity-check (LDPC) codes are specified by graphs, and are the error correction technique of choice in many communications and data storage contexts. Message passing decoders diffuse information carried by parity bits into the payload, and this paper measures the value of engineering parity bits to be more reliable than message bits. We consider the binary symmetric channel (BSC) and measure the impact of unequal data protection on the threshold of a regular LDPC code. Our analysis also includes doping where the parity bits are known to the decoder. We investigate BSC with Gallager-A decoder, with a $3$-level-alphabet decoder, and with a full belief propagation decoder. We demonstrate through theoretical analysis and simulation that non-equiprobable inputs lead to significant improvements both in the threshold and in the speed with which the decoder converges. We also show that all these improvements are possible even with a simple $3$-level-alphabet decoder., Comment: 8 pages (double column), 1 figure, submitted to the International Symposium on Topics in Coding (ISTC)

In our first paper [2] we explained why the Zak-OTFS input-output (I/O) relation is predictable and non-fading when the delay and Doppler periods are greater than the effective channel delay and Doppler spreads, a condition which we refer to as the crystallization condition. We argued that a communication system should operate within the crystalline regime. It is well known that it is possible to identify a linear time varying (LTV) channel if and only if it is under-spread. The crystallization condition is more restrictive than the under-spread condition, so identification is always possible. In the crystalline regime, we show that Zak-OTFS pilot sequences minimize the complexity of identifying the effective DD domain channel filter. We demonstrate that the filter taps can simply be read off from the response to a single Zak-OTFS pilot. In general, we provide an explicit formula for reconstructing the Zak-OTFS I/O relation from a finite number of received pilot symbols in the delay-Doppler (DD) domain. This reconstruction formula makes it possible to study predictability of the Zak-OTFS I/O relation for a sampled system that operates under finite duration and bandwidth constraints. We analyze reconstruction accuracy for different choices of the delay and Doppler periods, and of the pulse shaping filter. Reconstruction accuracy is high when the crystallization condition is satisfied, implying that it is possible to learn directly the I/O relation without needing to estimate the underlying channel. This opens up the possibility of a model-free mode of operation, which is especially useful when a traditional model-dependent mode of operation (reliant on estimation of the underlying physical channel) is out of reach (for example, when the channel comprises of unresolvable paths, or exhibits a continuous delay-Doppler profile such as in presence of acceleration). Our study clarifies the, Comment: This article has been accepted for publication in IEEE BITS the Information Theory Magazine

Orthogonal time frequency space (OTFS) is a framework for communication and active sensing that processes signals in the delay-Doppler (DD) domain. This paper explores three key features of the OTFS framework, and explains their value to applications. The first feature is a compact and sparse DD domain parameterization of the wireless channel, where the parameters map directly to physical attributes of the reflectors that comprise the scattering environment, and as a consequence these parameters evolve predictably. The second feature is a novel waveform / modulation technique, matched to the DD channel model, that embeds information symbols in the DD domain. The relation between channel inputs and outputs is localized, non-fading and predictable, even in the presence of significant delay and Doppler spread, and as a consequence the channel can be efficiently acquired and equalized. By avoiding fading, the post equalization SNR remains constant across all information symbols in a packet, so that bit error performance is superior to contemporary multi-carrier waveforms. Further, the OTFS carrier waveform is a localized pulse in the DD domain, making it possible to separate reflectors along both delay and Doppler simultaneously, and to achieve a high-resolution delay-Doppler radar image of the environment. In other words, the DD parameterization provides a common mathematical framework for communication and radar. This is the third feature of the OTFS framework, and it is ideally suited to intelligent transportation systems involving self-driving cars and unmanned ground/aerial vehicles which are self/network controlled. The OTFS waveform is able to support stable and superior performance over a wide range of user speeds., Comment: Accepted for publication in IEEE BITS the Information Theory Magazine

The pivotal storage density win achieved by solid-state devices over magnetic devices recently is a result of multiple innovations in physics, architecture, and signal processing. Constrained coding is used in Flash devices to increase reliability via mitigating inter-cell interference. Recently, capacity-achieving constrained codes were introduced to serve that purpose. While these codes result in minimal redundancy, they result in non-negligible complexity increase and access speed limitation since pages cannot be read separately. In this paper, we suggest new constrained coding schemes that have low-complexity and preserve the desirable high access speed in modern Flash devices. The idea is to eliminate error-prone patterns by coding data either only on the left-most page (binary coding) or only on the two left-most pages ($4$-ary coding) while leaving data on all the remaining pages uncoded. Our coding schemes are systematic and capacity-approaching. We refer to the proposed schemes as read-and-run (RR) constrained coding schemes. The $4$-ary RR coding scheme is introduced to limit the rate loss. We analyze the new RR coding schemes and discuss their impact on the probability of occurrence of different charge levels. We also demonstrate the performance improvement achieved via RR coding on a practical triple-level cell Flash device., Comment: 30 pages (single column), 5 figures, submitted to the IEEE Transactions on Communications (TCOM). arXiv admin note: substantial text overlap with arXiv:2111.07415

Divisible codes are defined by the property that codeword weights share a common divisor greater than one. They are used to design signals for communications and sensing, and this paper explores how they can be used to protect quantum information as it is transformed by logical gates. Given a CSS code $\mathcal{C}$, we derive conditions that are both necessary and sufficient for a transversal diagonal physical operator $U_Z$ to preserve $\mathcal{C}$ and induce $U_L$. The group of $Z$-stabilizers in a CSS code $\mathcal{C}$ is determined by the dual of a classical $[n, k_1]$ binary code $\mathcal{C}_1$, and the group of $X$-stabilizers is determined by a classical $[n, k_2]$ binary code $\mathcal{C}_2$ that is contained in $\mathcal{C}_1$. The requirement that a diagonal physical operator $U_Z$ fixes a CSS code $\mathcal{C}$ leads to constraints on the congruence of weights in cosets of $\mathcal{C}_2$. These constraints are a perfect fit to divisible codes, and represent an opportunity to take advantage of the extensive literature on classical codes with two or three weights. We construct new families of CSS codes using cosets of the first order Reed Muller code defined by quadratic forms. We provide a simple alternative to the standard method of deriving the coset weight distributions (based on Dickson normal form) that may be of independent interest. Finally, we develop an approach to circumventing the Eastin-Knill Theorem which states that no QECC can implement a universal set of logical gates through transversal gates alone. The essential idea is to design stabilizer codes in layers, with $N_1$ inner qubits and $N_2$ outer qubits, and to assemble a universal set of fault tolerant gates on the inner qubits., Comment: Jingzhen Hu and Qingzhong Liang contribute equally to this work. 11 pages. Comments welcome!

Phase retrieval is known to always be unstable when using a frame or continuous frame for an infinite dimensional Hilbert space. We consider a generalization of phase retrieval to the setting of subspaces of $L_2$ which coincides with using a continuous frame for phase retrieval when the subspace is the range of the analysis operator of a continuous frame. We then prove that there do exist infinite dimensional subspaces of $L_2$ where phase retrieval is stable. That is, we give a method for constructing an infinite dimensional subspace $Y\subseteq L_2$ such that there exists $C\geq 1$ so that $$\min\big(\big\|f-g\big\|_{L_2},\big\|f+g\big\|_{L_2}\big)\leq C \big\| |f|-|g| \big\|_{L_2} \qquad\textrm{ for all }f,g\in Y. $$ This construction also leads to new results on uniform stability of phase retrieval in finite dimensions. Our construction has a deterministic component and a random component. When using sub-Gaussian random variables we achieve phase retrieval with high probability and stability constant independent of the dimension $n$ when using $m$ on the order of $n$ random vectors. Without sub-Gaussian or any other higher moment assumptions, we are able to achieve phase retrieval with high probability and stability constant independent of the dimension $n$ when using $m$ on the order of $n\log(n)$ random vectors., Comment: 27 pages

The pivotal storage density win achieved by solid-state devices over magnetic devices in 2015 is a result of multiple innovations in physics, architecture, and signal processing. One of the most important innovations in that regard is enabling the storage of more than one bit per cell in the Flash device, i.e., having more than two charge levels per cell. Constrained coding is used in Flash devices to increase reliability via mitigating inter-cell interference that stems from charge propagation among cells. Recently, capacity-achieving constrained codes were introduced to serve that purpose in modern Flash devices, which have more than two levels per cell. While these codes result in minimal redundancy via exploiting the underlying physics, they result in non-negligible complexity increase and access speed limitation since pages cannot be read separately. In this paper, we suggest new constrained coding schemes that have low-complexity and preserve the desirable high access speed in modern Flash devices. The idea is to eliminate error-prone patterns by coding data only on the left-most page while leaving data on all the remaining pages uncoded. Our coding schemes work for any number of levels per cell, offer systematic encoding and decoding, and are capacity-approaching. Since the proposed schemes enable the separation of pages, we refer to them as read-and-run (RR) constrained coding schemes as opposed to schemes adopting read-and-wait for other pages. We analyze the new RR coding schemes and discuss their impact on the probability of occurrence of different charge levels. We also demonstrate the performance improvement achieved via RR coding on a practical triple-level cell Flash device., Comment: 7 pages (double column), 4 figures, submitted to the IEEE International Conference on Communications (ICC)

Magic state distillation and the Shor factoring algorithm make essential use of logical diagonal gates. We introduce a method of synthesizing CSS codes that realize a target logical diagonal gate at some level $l$ in the Clifford hierarchy. The method combines three basic operations: concatenation, removal of $Z$-stabilizers, and addition of $X$-stabilizers. It explicitly tracks the logical gate induced by a diagonal physical gate that preserves a CSS code. The first step is concatenation, where the input is a CSS code and a physical diagonal gate at level $l$ inducing a logical diagonal gate at the same level. The output is a new code for which a physical diagonal gate at level $l+1$ induces the original logical gate. The next step is judicious removal of $Z$-stabilizers to increase the level of the induced logical operator. We identify three ways of climbing the logical Clifford hierarchy from level $l$ to level $l+1$, each built on a recursive relation on the Pauli coefficients of the induced logical operators. Removal of $Z$-stabilizers may reduce distance, and the purpose of the third basic operation, addition of $X$-stabilizers, is to compensate for such losses. For the coherent noise model, we describe how to switch between computation and storage of intermediate results in a decoherence-free subspace by simply applying Pauli $X$ matrices. The approach to logical gate synthesis taken in prior work focuses on the code states, and results in sufficient conditions for a CSS code to be fixed by a transversal $Z$-rotation. In contrast, we derive necessary and sufficient conditions by analyzing the action of a transversal diagonal gate on the stabilizer group that determines the code. The power of our approach is demonstrated by two proofs of concept: the $[[2^{l+1}-2,2,2]]$ triorthogonal code family, and the $[[2^m,\binom{m}{r},2^{\min\{r,m-r\}}]]$ quantum Reed-Muller code family., Comment: Jingzhen Hu and Qingzhong Liang contribute equally to this work. 15 pages, two columns, 8 figures, and 1 table. Comments welcome! This work is an application based on the mathematical framework introduced in arXiv:2109.13481

The challenge of quantum computing is to combine error resilience with universal computation. Diagonal gates such as the transversal $T$ gate play an important role in implementing a universal set of quantum operations. This paper introduces a framework that describes the process of preparing a code state, applying a diagonal physical gate, measuring a code syndrome, and applying a Pauli correction that may depend on the measured syndrome (the average logical channel induced by an arbitrary diagonal gate). It focuses on CSS codes, and describes the interaction of code states and physical gates in terms of generator coefficients determined by the induced logical operator. The interaction of code states and diagonal gates depends very strongly on the signs of $Z$-stabilizers in the CSS code, and the proposed generator coefficient framework explicitly includes this degree of freedom. The paper derives necessary and sufficient conditions for an arbitrary diagonal gate to preserve the code space of a stabilizer code, and provides an explicit expression of the induced logical operator. When the diagonal gate is a quadratic form diagonal gate (introduced by Rengaswamy et al.), the conditions can be expressed in terms of divisibility of weights in the two classical codes that determine the CSS code. These codes find application in magic state distillation and elsewhere. When all the signs are positive, the paper characterizes all possible CSS codes, invariant under transversal $Z$-rotation through $\pi/2^l$, that are constructed from classical Reed-Muller codes by deriving the necessary and sufficient constraints on $l$. The generator coefficient framework extends to arbitrary stabilizer codes but there is nothing to be gained by considering the more general class of non-degenerate stabilizer codes., Comment: Jingzhen Hu and Qingzhong Liang contribute equally to this work. The paper was accepted to Quantum on 31 Aug 2022

Spatially-coupled (SC) codes, known for their threshold saturation phenomenon and low-latency windowed decoding algorithms, are ideal for streaming applications and data storage systems. SC codes are constructed by partitioning an underlying block code, followed by rearranging and concatenating the partitioned components in a convolutional manner. The number of partitioned components determines the memory of SC codes. In this paper, we investigate the relation between the performance of SC codes and the density distribution of partitioning matrices. While adopting higher memories results in improved SC code performance, obtaining finite-length, high-performance SC codes with high memory is known to be computationally challenging. We break this computational bottleneck by developing a novel probabilistic framework that obtains (locally) optimal density distributions via gradient descent. Starting from random partitioning matrices abiding by the obtained distribution, we perform low-complexity optimization algorithms that minimize the number of detrimental objects to construct high-memory, high-performance quasi-cyclic SC codes. We apply our framework to various objects of interests, from the simplest short cycles, to more sophisticated objects such as concatenated cycles aiming at finer-grained optimization. Simulation results show that codes obtained through our proposed method notably outperform state-of-the-art SC codes with the same constraint length and optimized SC codes with uniform partitioning. The performance gain is shown to be universal over a variety of channels, from canonical channels such as additive white Gaussian noise and binary symmetric channels, to practical channels underlying flash memory and magnetic recording systems., Comment: 26 pages, 30 figures, 2 tables, the manuscript has been submitted to IEEE Transactions on Information Theory. arXiv admin note: substantial text overlap with arXiv:2101.09962

Orthogonal Time Frequency Space (OTFS) is a novel framework that processes modulation symbols via a time-independent channel characterized by the delay-Doppler domain. The conventional waveform, orthogonal frequency division multiplexing (OFDM), requires tracking frequency selective fading channels over the time, whereas OTFS benefits from full time-frequency diversity by leveraging appropriate equalization techniques. In this paper, we consider a neural network-based supervised learning framework for OTFS equalization. Learning of the introduced neural network is conducted in each OTFS frame fulfilling an online learning framework: the training and testing datasets are within the same OTFS-frame over the air. Utilizing reservoir computing, a special recurrent neural network, the resulting one-shot online learning is sufficiently flexible to cope with channel variations among different OTFS frames (e.g., due to the link/rank adaptation and user scheduling in cellular networks). The proposed method does not require explicit channel state information (CSI) and simulation results demonstrate a lower bit error rate (BER) than conventional equalization methods in the low signal-to-noise (SNR) regime under large Doppler spreads. When compared with its neural network-based counterparts for OFDM, the introduced approach for OTFS will lead to a better tradeoff between the processing complexity and the equalization performance.

Computational storage, known as a solution to significantly reduce the latency by moving data-processing down to the data storage, has received wide attention because of its potential to accelerate data-driven devices at the edge. To meet the insatiable appetite for complicated functionalities tailored for intelligent devices such as autonomous vehicles, properties including heterogeneity, scalability, and flexibility are becoming increasingly important. Based on our prior work on hierarchical erasure coding that enables scalability and flexibility in cloud storage, we develop an efficient decoding algorithm that corrects a mixture of errors and erasures simultaneously. We first extract the basic component code, the so-called extended Cauchy (EC) codes, of the proposed coding solution. We prove that the class of EC codes is strictly larger than that of relevant codes with known explicit decoding algorithms. Motivated by this finding, we then develop an efficient decoding method for the general class of EC codes, based on which we propose the local and global decoding algorithms for the hierarchical codes. Our proposed hybrid error correction not only enables the usage of hierarchical codes in computational storage at the edge, but also applies to any Cauchy-like codes and allows potentially wider applications of the EC codes., Comment: 29 pages (single column), 0 figures, to be submitted to IEEE Transactions on Communications

We describe in details the interplay between binary symplectic geometry and quantum computation, with the ultimate goal of constructing highly structured codebooks. The Binary Chirps (BCs) are Complex Grassmannian Lines in $N = 2^m$ dimensions used in deterministic compressed sensing and random/unsourced multiple access in wireless networks. Their entries are fourth roots of unity and can be described in terms of second order Reed-Muller codes. The Binary Subspace Chirps (BSSCs) are a unique collection of BCs of $\textit{ranks}$ ranging from $r=0$ to $r = m$, embedded in $N$ dimensions according to an on-off pattern determined by a rank $r$ binary subspace. This yields a codebook that is asymptotically 2.38 times larger than the codebook of BCs, has the same minimum chordal distance as the codebook of BCs, and the alphabet is minimally extended from $\{\pm 1,\pm i\}$ to $\{\pm 1,\pm i, 0\}$. Equivalently, we show that BSSCs are stabilizer states, and we characterize them as columns of a well-controlled collection of Clifford matrices. By construction, the BSSCs inherit all the properties of BCs, which in turn makes them good candidates for a variety of applications. For applications in wireless communication, we use the rich algebraic structure of BSSCs to construct a low complexity decoding algorithm that is reliable against Gaussian noise. In simulations, BSSCs exhibit an error probability comparable or slightly lower than BCs, both for single-user and multi-user transmissions., Comment: arXiv admin note: text overlap with arXiv:2005.07900

Spatially-coupled (SC) codes, known for their threshold saturation phenomenon and low-latency windowed decoding algorithms, are ideal for streaming applications. They also find application in various data storage systems because of their excellent performance. SC codes are constructed by partitioning an underlying block code, followed by rearranging and concatenating the partitioned components in a "convolutional" manner. The number of partitioned components determines the "memory" of SC codes. While adopting higher memories results in improved SC code performance, obtaining optimal SC codes with high memory is known to be hard. In this paper, we investigate the relation between the performance of SC codes and the density distribution of partitioning matrices. We propose a probabilistic framework that obtains (locally) optimal density distributions via gradient descent. Starting from random partitioning matrices abiding by the obtained distribution, we perform low complexity optimization algorithms over the cycle properties to construct high memory, high performance quasi-cyclic SC codes. Simulation results show that codes obtained through our proposed method notably outperform state-of-the-art SC codes with the same constraint length and codes with uniform partitioning., Comment: 8 pages, 10 figures, 1 table, the shortened version has been submitted to ISIT 2021

Because of their capacity-approaching performance, graph-based codes have a wide range of applications, including communications and storage. In these codes, unequal error protection (UEP) can offer performance gains with limited rate loss. Recent empirical results in magnetic recording (MR) systems show that extra protection for the parity bits of a low-density parity-check (LDPC) code via constrained coding results in significant density gains. In particular, when UEP is applied via more reliable parity bits, higher fidelity messages of parity bits are spread to all bits by message passing algorithm, enabling performance gains. Threshold analysis is a tool to measure the effectiveness of a graph-based code or coding scheme. In this paper, we provide a theoretical analysis of this UEP idea using extrinsic information transfer (EXIT) charts in the binary erasure channel (BEC) and the binary symmetric channel (BSC). We use EXIT functions to investigate the effect of change in mutual information of parity bits on the overall coding scheme. We propose a setup in which parity bits of a repeat-accumulate (RA) LDPC code have lower erasure or crossover probabilities than input information bits. We derive the a-priori and extrinsic mutual information functions for check nodes and variable nodes of the code. After applying our UEP setup to the information functions, we formulate a linear programming problem to find the optimal degree distribution that maximizes the code rate under the decoding convergence constraint. Results show that UEP via higher fidelity parity bits achieves up to about $17\%$ and $28\%$ threshold gains on BEC and BSC, respectively., Comment: 8 pages (double column), 3 figures, submitted to the IEEE International Symposium on Information Theory (ISIT)

Physical platforms such as trapped ions suffer from coherent noise where errors manifest as rotations about a particular axis and can accumulate over time. We investigate passive mitigation through decoherence free subspaces, requiring the noise to preserve the code space of a stabilizer code, and to act as the logical identity operator on the protected information. Thus, we develop necessary and sufficient conditions for all transversal $Z$-rotations to preserve the code space of a stabilizer code, which require the weight-$2$ $Z$-stabilizers to cover all the qubits that are in the support of some $X$-component. Further, the weight-$2$ $Z$-stabilizers generate a direct product of single-parity-check codes with even block length. By adjusting the size of these components, we are able to construct a large family of QECC codes, oblivious to coherent noise, that includes the $[[4L^2, 1, 2L]]$ Shor codes. Moreover, given $M$ even and any $[[n,k,d]]$ stabilizer code, we can construct an $[[Mn, k, \ge d]]$ stabilizer code that is oblivious to coherent noise. If we require that transversal $Z$-rotations preserve the code space only up to some finite level $l$ in the Clifford hierarchy, then we can construct higher level gates necessary for universal quantum computation. The $Z$-stabilizers supported on each non-zero $X$-component form a classical binary code C, which is required to contain a self-dual code, and the classical Gleason's theorem constrains its weight enumerator. The conditions for a stabilizer code being preserved by transversal $2\pi/2^l$ $Z$-rotations at $4 \le l \le l_{\max} <\infty$ level in the Clifford hierarchy lead to generalizations of Gleason's theorem that may be of independent interest to classical coding theorists., Comment: Jingzhen Hu and Qingzhong Liang contributed equally to this work. The paper was accepted to IEEE Transactions on Information Theory. The ISIT paper is available as an ancillary file

Unitary $k$-designs are probabilistic ensembles of unitary matrices whose first $k$ statistical moments match that of the full unitary group endowed with the Haar measure. In prior work, we showed that the automorphism group of classical $\mathbb{Z}_4$-linear Kerdock codes maps to a unitary $2$-design, which established a new classical-quantum connection via graph states. In this paper, we construct a Markov process that mixes this Kerdock $2$-design with symplectic transvections, and show that this process produces an $\epsilon$-approximate unitary $3$-design. We construct a graph whose vertices are Pauli matrices, and two vertices are connected by directed edges if and only if they commute. A unitary ensemble that is transitive on vertices, edges, and non-edges of this Pauli graph is an exact $3$-design, and the stationary distribution of our process possesses this property. With respect to the symmetries of Kerdock codes, the Pauli graph has two types of edges; the Kerdock $2$-design mixes edges of the same type, and the transvections mix the types. More precisely, on $m$ qubits, the process samples $O(\log(N^5/\epsilon))$ random transvections, where $N = 2^m$, followed by a random Kerdock $2$-design element and a random Pauli matrix. Hence, the simplicity of the protocol might make it attractive for several applications. From a hardware perspective, $2$-qubit transvections exactly map to the M{\o}lmer-S{\o}rensen gates that form the native $2$-qubit operations for trapped-ion quantum computers. Thus, it might be possible to extend our work to construct an approximate $3$-design that only involves such $2$-qubit transvections., Comment: 25 pages, submitted to Designs, Codes and Cryptography

Constrained codes are used to prevent errors from occurring in various data storage and data transmission systems. They can help in increasing the storage density of magnetic storage devices, in managing the lifetime of electronic storage devices, and in increasing the reliability of data transmission over wires. We recently introduced families of lexicographically-ordered constrained (LOCO) codes. These codes achieve capacity with simple encoding and decoding, and they are easy to reconfigure. In this paper, we generalize our work on LOCO codes by presenting a systematic method that guides the code designer to build any constrained code based on lexicographic indexing once the finite set of data patterns to forbid is known. In particular, we connect the set of forbidden patterns directly to the cardinality of the code and to the rule that uncovers the index associated with a codeword. By doing that, we reveal the secret arithmetic of patterns, and make the code design significantly easier. We design optimal (rate-wise) constrained codes for the new two-dimensional magnetic recording (TDMR) technology. We show notable performance gains as a result of solely applying the new codes. Moreover, we show how near-optimal constrained codes be designed and used to further reduce complexity., Comment: 35 pages (single column), 6 figures, submitted to the IEEE Transactions on Information Theory (TIT)

Constrained codes are used to eliminate error-prone patterns in various practical systems. Recently, we introduced efficient binary symmetric lexicographically-ordered constrained (LOCO) codes and asymmetric LOCO (A-LOCO) codes to increase density in magnetic recording systems and lifetime in Flash systems by eliminating the relevant detrimental patterns. Due to their application, LOCO and A-LOCO codes are associated with level-based signaling. Studying the power spectrum of a random signal with certain properties is principal for any storage or transmission system. In this paper, we first modify a framework from the literature in order to introduce a method to derive the power spectrum of a sequence of constrained data associated with level-based signaling. We apply our method to infinitely long sequences satisfying symmetric and asymmetric constraints. Next, we show how to generalize the method such that it works for a stream of finite-length codewords. We use the generalized method to devise closed forms for the spectra of finite-length LOCO and A-LOCO codes from their transition diagrams. Our LOCO and A-LOCO spectral derivations can be performed for any code length and can be extended to other constrained codes. We plot these power spectra, and discuss various important spectral properties for both LOCO and A-LOCO codes., Comment: 30 pages (single column), 12 figures, submitted to the IEEE Transactions on Communications (TCOM)

In order to accommodate the ever-growing data from various, possibly independent, sources and the dynamic nature of data usage rates in practical applications, modern cloud data storage systems are required to be scalable, flexible, and heterogeneous. The recent rise of the blockchain technology is also moving various information systems towards decentralization to achieve high privacy at low costs. While codes with hierarchical locality have been intensively studied in the context of centralized cloud storage due to their effectiveness in reducing the average reading time, those for decentralized storage networks (DSNs) have not yet been discussed. In this paper, we propose a joint coding scheme where each node receives extra protection through the cooperation with nodes in its neighborhood in a heterogeneous DSN with any given topology. This work extends and subsumes our prior work on coding for centralized cloud storage. In particular, our proposed construction not only preserves desirable properties such as scalability and flexibility, which are critical in dynamic networks, but also adapts to arbitrary topologies, a property that is essential in DSNs but has been overlooked in existing works., Comment: 25 pages (single column), 19 figures, submitted to the IEEE Transactions on Information Theory (TIT)

The teleportation model of quantum computation introduced by Gottesman and Chuang (1999) motivated the development of the Clifford hierarchy. Despite its intrinsic value for quantum computing, the widespread use of magic state distillation, which is closely related to this model, emphasizes the importance of comprehending the hierarchy. There is currently a limited understanding of the structure of this hierarchy, apart from the case of diagonal unitaries (Cui et al., 2017; Rengaswamy et al. 2019). We explore the structure of the second and third levels of the hierarchy, the first level being the ubiquitous Pauli group, via the Weyl (i.e., Pauli) expansion of unitaries at these levels. In particular, we characterize the support of the standard Clifford operations on the Pauli group. Since conjugation of a Pauli by a third level unitary produces traceless Hermitian Cliffords, we characterize their Pauli support as well. Semi-Clifford unitaries are known to have ancilla savings in the teleportation model, and we explore their Pauli support via symplectic transvections. Finally, we show that, up to multiplication by a Clifford, every third level unitary commutes with at least one Pauli matrix. This can be used inductively to show that, up to a multiplication by a Clifford, every third level unitary is supported on a maximal commutative subgroup of the Pauli group. Additionally, it can be easily seen that the latter implies the generalized semi-Clifford conjecture, proven by Beigi and Shor (2010). We discuss potential applications in quantum error correction and the design of flag gadgets., Comment: License changed. Accepted to Quantum on 26 Nov 2020

The two-dimensional magnetic recording (TDMR) technology promises storage densities of $10$ terabits per square inch. However, when tracks are squeezed together, a bit stored in the two-dimensional (TD) grid suffers inter-symbol interference (ISI) from adjacent bits in the same track, and inter-track interference (ITI) from nearby bits in the adjacent tracks. A bit is highly likely to be read incorrectly if it is isolated in the middle of a $3 \times3$ square; surrounded by its complements, horizontally and vertically. We improve the reliability of TDMR systems by designing two-dimensional constrained codes that prevent these square isolation patterns. We exploit the way TD read heads operate to design our codes, and we focus on TD read heads that collect signals from three adjacent tracks. We represent the two-dimensional square isolation constraint as a one-dimensional constraint on an alphabet of eight non-binary symbols. We use this new representation to construct a non-binary lexicographically-ordered constrained code where one third of the information bits are unconstrained. Our TD constraint codes are capacity-achieving, and the data protection is achieved with redundancy less than $3\%$ and at modest complexity., Comment: 9 pages (double column), 2 figures, submitted to the IEEE Transactions on Magnetics (TMAG)

We consider codebooks of Complex Grassmannian Lines consisting of Binary Subspace Chirps (BSSCs) in $N = 2^m$ dimensions. BSSCs are generalizations of Binary Chirps (BCs), their entries are either fourth-roots of unity, or zero. BSSCs consist of a BC in a non-zero subspace, described by an on-off pattern. Exploring the underlying binary symplectic geometry, we provide a unified framework for BSSC reconstruction---both on-off pattern and BC identification are related to stabilizer states of the underlying Heisenberg-Weyl algebra. In a multi-user random access scenario we show feasibility of reliable reconstruction of multiple simultaneously transmitted BSSCs with low complexity., Comment: To appear in IEEE ISIT 2020

We present a general method for constructing radar transmit pulse trains and receive filters for which the radar point-spread function in delay and Doppler (radar cross-ambiguity function) is essentially free of range sidelobes inside a Doppler interval around the zero-Doppler axis. The transmit and receive pulse trains are constructed by coordinating the transmission of a pair of Golay complementary waveforms across time according to zeros and ones in a binary sequence $P$. In the receive pulse train filter, each waveform is weighted according to an element from another sequence $Q$. We show that the spectrum of essentially the product of $P$ and $Q$ sequences controls the size of the range sidelobes of the cross-ambiguity function. We annihilate the range sidelobes at low Doppler by designing the $(P,Q)$ pairs such that their products have high-order spectral nulls around zero Doppler. We specify the subspace, along with a basis, for such sequences, thereby providing a general way of constructing $(P,Q)$ pairs. At the same time, the signal-to-noise ratio (SNR) at the receiver output, for a single point target in white noise, depends only on the choice of $Q$. By jointly designing the transmit-receive sequences $(P,Q)$, we can maximize the output SNR subject to achieving a given order of the spectral null. The proposed $(P,Q)$ constructions can also be extended to sequences consisting of more than two complementary waveforms; this is done explicitly for a library of Golay complementary quads. Finally, we extend the construction of $(P,Q)$ pairs to multiple-input-multiple-output (MIMO) radar, by designing transmit-receive pairs of paraunitary waveform matrices whose matrix-valued cross-ambiguity function is essentially free of range sidelobes inside a Doppler interval around the zero-Doppler axis., Comment: 13 pages, submitted to the IEEE Transactions on Signal Processing, August 12, 2019

Universal quantum computation requires the implementation of a logical non-Clifford gate. In this paper, we characterize all stabilizer codes whose code subspaces are preserved under physical $T$ and $T^{-1}$ gates. For example, this could enable magic state distillation with non-CSS codes and, thus, provide better parameters than CSS-based protocols. However, among non-degenerate stabilizer codes that support transversal $T$, we prove that CSS codes are optimal. We also show that triorthogonal codes are, essentially, the only family of CSS codes that realize logical transversal $T$ via physical transversal $T$. Using our algebraic approach, we reveal new purely-classical coding problems that are intimately related to the realization of logical operations via transversal $T$. Decreasing monomial codes are also used to construct a code that realizes logical CCZ. Finally, we use Ax's theorem to characterize the logical operation realized on a family of quantum Reed-Muller codes. This result is generalized to finer angle $Z$-rotations in arXiv:1910.09333., Comment: This is a shorter version of arXiv:1910.09333. 5 pages main text. Presented at ISIT 2020. Comments welcome!

From currency to cloud storage systems, the continuous rise of the blockchain technology is moving various information systems towards decentralization. Blockchain-based decentralized storage networks (DSNs) offer significantly higher privacy and lower costs to customers compared with centralized cloud storage associated with specific vendors. Coding is required in order to retrieve data stored on failing components. While coding solutions for centralized storage have been intensely studied, topology-aware coding for heterogeneous DSNs have not yet been discussed. In this paper, we propose a joint coding scheme where each node receives extra protection through the cooperation with nodes in its neighborhood in a heterogeneous DSN with any given topology. As an extension of, which also subsumes, our prior work on coding for centralized cloud storage, our proposed construction preserves desirable properties such as scalability and flexibility in networks with varying topologies., Comment: 6 pages, 7 figures, the edits in this version are in response to the reviews we received on the short version accepted recently at ISIT 2020

Flash memory devices are winning the competition for storage density against magnetic recording devices. This outcome results from advances in physics that allow storage of more than one bit per cell, coupled with advances in signal processing that reduce the effect of physical instabilities. Constrained codes are used in storage to avoid problematic patterns. Recently, we introduced binary symmetric lexicographically-ordered constrained codes (LOCO codes) for data storage and data transmission. This paper introduces simple constrained codes that support non-binary physical substrates; multi, triple, quad, and the currently-in-development penta-level cell (M/T/Q/P-LC) Flash memories. The new codes can be easily modified if problematic patterns change with time. These codes are designed to mitigate inter-cell interference, which is a critical source of error in Flash devices. The occurrence of errors is a consequence of parasitic capacitances in and across floating gate transistors, resulting in charge propagation from cells being programmed to the highest charge level to neighboring cells being programmed to lower levels. The new codes are called $q$-ary asymmetric LOCO codes (QA-LOCO codes), and the construction subsumes codes previously designed for single-level cell (SLC) Flash devices (A-LOCO codes). QA-LOCO codes work for a Flash device with any number, $q$, of levels per cell. For $q \geq 4$, we show that QA-LOCO codes can achieve rates greater than $0.95 \log_2 q$ information bits per coded symbol. The complexity of encoding and decoding is modest, and reconfiguring a code is as easy as reprogramming an adder. Capacity-achieving rates, affordable encoding-decoding complexity, and ease of reconfigurability support the growing development of M/T/Q/P-LC Flash memory devices, as well as lifecycle management as the characteristics of these devices change with time., Comment: 10 pages (double column), 0 figures, to be submitted to the IEEE Transactions on Information Theory (TIT), a short version is to be submitted to the IEEE International Symposium on Information Theory (ISIT)

The great promise of quantum computers comes with the dual challenges of building them and finding their useful applications. We argue that these two challenges should be considered together, by co-designing full-stack quantum computer systems along with their applications in order to hasten their development and potential for scientific discovery. In this context, we identify scientific and community needs, opportunities, a sampling of a few use case studies, and significant challenges for the development of quantum computers for science over the next 2--10 years. This document is written by a community of university, national laboratory, and industrial researchers in the field of Quantum Information Science and Technology, and is based on a summary from a U.S. National Science Foundation workshop on Quantum Computing held on October 21--22, 2019 in Alexandria, VA.

In order to perform universal fault-tolerant quantum computation, one needs to implement a logical non-Clifford gate. Consequently, it is important to understand codes that implement such gates transversally. In this paper, we adopt an algebraic approach to characterize all stabilizer codes for which transversal $T$ and $T^{-1}$ gates preserve the codespace. Our Heisenberg perspective reduces this to a finite geometry problem that translates to the design of certain classical codes. We prove three corollaries: (a) For any non-degenerate $[[ n,k,d ]]$ stabilizer code supporting a physical transversal $T$, there exists an $[[ n,k,d ]]$ CSS code with the same property; (b) Triorthogonal codes are the most general CSS codes that realize logical transversal $T$ via physical transversal $T$; (c) Triorthogonality is necessary for physical transversal $T$ on a CSS code to realize the logical identity. The main tool we use is a recent efficient characterization of certain diagonal gates in the Clifford hierarchy (arXiv:1902.04022). We refer to these gates as Quadratic Form Diagonal (QFD) gates. Our framework generalizes all existing code constructions that realize logical gates via transversal $T$. We provide several examples and briefly discuss connections to decreasing monomial codes, pin codes, generalized triorthogonality and quasitransversality. We partially extend these results towards characterizing all stabilizer codes that support transversal $\pi/2^{\ell}$ $Z$-rotations. In particular, using Ax's theorem on residue weights of polynomials, we provide an alternate characterization of logical gates induced by transversal $\pi/2^{\ell}$ $Z$-rotations on a family of quantum Reed-Muller codes. We also briefly discuss a general approach to analyze QFD gates that might lead to a characterization of all stabilizer codes that support any given physical transversal $1$- or $2$-local diagonal gate., Comment: v2: Much improved proof for Theorem 2, and some presentation improvements in other proofs. Main sections: 16 pages, double column, IEEEtran style. Examples included. Comments welcome!

Encoding the scale information explicitly into the representation learned by a convolutional neural network (CNN) is beneficial for many computer vision tasks especially when dealing with multiscale inputs. We study, in this paper, a scaling-translation-equivariant (ST-equivariant) CNN with joint convolutions across the space and the scaling group, which is shown to be both sufficient and necessary to achieve equivariance for the regular representation of the scaling-translation group ST . To reduce the model complexity and computational burden, we decompose the convolutional filters under two pre-fixed separable bases and truncate the expansion to low-frequency components. A further benefit of the truncated filter expansion is the improved deformation robustness of the equivariant representation, a property which is theoretically analyzed and empirically verified. Numerical experiments demonstrate that the proposed scaling-translation-equivariant network with decomposed convolutional filters (ScDCFNet) achieves significantly improved performance in multiscale image classification and better interpretability than regular CNNs at a reduced model size.

In data storage and data transmission, certain patterns are more likely to be subject to error when written (transmitted) onto the media. In magnetic recording systems with binary data and bipolar non-return-to-zero signaling, patterns that have insufficient separation between consecutive transitions exacerbate inter-symbol interference. Constrained codes are used to eliminate such error-prone patterns. A recent example is a new family of capacity-achieving constrained codes, named lexicographically-ordered constrained codes (LOCO codes). LOCO codes are symmetric, that is, the set of forbidden patterns is closed under taking pattern complements. LOCO codes are suboptimal in terms of rate when used in Flash devices where block erasure is employed since the complement of an error-prone pattern is not detrimental in these devices. This paper introduces asymmetric LOCO codes (A-LOCO codes), which are lexicographically-ordered constrained codes that forbid only those patterns that are detrimental for Flash performance. A-LOCO codes are also capacity-achieving, and at finite-lengths, they offer higher rates than the available state-of-the-art constrained codes designed for the same goal. The mapping-demapping between the index and the codeword in A-LOCO codes allows low-complexity encoding and decoding algorithms that are simpler than their LOCO counterparts., Comment: 9 pages (double column), 0 figures, accepted at the Annual Allerton Conference on Communication, Control, and Computing

Quantum error-correcting codes are used to protect qubits involved in quantum computation. This process requires logical operators, acting on protected qubits, to be translated into physical operators (circuits) acting on physical quantum states. We propose a mathematical framework for synthesizing physical circuits that implement logical Clifford operators for stabilizer codes. Circuit synthesis is enabled by representing the desired physical Clifford operator in $\mathbb{C}^{N \times N}$ as a partial $2m \times 2m$ binary symplectic matrix, where $N = 2^m$. We state and prove two theorems that use symplectic transvections to efficiently enumerate all binary symplectic matrices that satisfy a system of linear equations. As a corollary of these results, we prove that for an $[\![ m,k ]\!]$ stabilizer code every logical Clifford operator has $2^{r(r+1)/2}$ symplectic solutions, where $r = m-k$, up to stabilizer degeneracy. The desired physical circuits are then obtained by decomposing each solution into a product of elementary symplectic matrices, that correspond to elementary circuits. This enumeration of all physical realizations enables optimization over the ensemble with respect to a suitable metric. Furthermore, we show that any circuit that normalizes the stabilizer of the code can be transformed into a circuit that centralizes the stabilizer, while realizing the same logical operation. Our method of circuit synthesis can be applied to any stabilizer code, and this paper discusses a proof of concept synthesis for the $[\![ 6,4,2 ]\!]$ CSS code. Programs implementing the algorithms in this paper, which includes routines to solve for binary symplectic solutions of general linear systems and our overall LCS (logical circuit synthesis) algorithm, can be found at: https://github.com/nrenga/symplectic-arxiv18a, Comment: Main content 12 pages, double column. This is primarily a shortened version of the paper arXiv:1803.06987 based on feedback received, and also has a much more improved introduction. It was presented at ISIT 2018 as well as posters in TQC 2018 and QIP 2019. All comments are welcome!

In order to accommodate the ever-growing data from various, possibly independent, sources and the dynamic nature of data usage rates in practical applications, modern cloud data storage systems are required to be scalable, flexible, and heterogeneous. Codes with hierarchical locality have been intensively studied due to their effectiveness in reducing the average reading time in cloud storage. In this paper, we present the first codes with hierarchical locality that achieve scalability and flexibility in heterogeneous cloud storage using small field size. We propose a double-level construction utilizing so-called Cauchy Reed-Solomon codes. We then develop a triple-level construction based on this double-level code; this construction can be easily generalized into any hierarchical structure with a greater number of layers since it naturally achieves scalability in the cloud storage systems., Comment: 7 pages, 1 figure, a shortened 6 pages version has been submitted to IEEE GLOBECOM 2019

The non-linear binary Kerdock codes are known to be Gray images of certain extended cyclic codes of length $N = 2^m$ over $\mathbb{Z}_4$. We show that exponentiating these $\mathbb{Z}_4$-valued codewords by $\imath \triangleq \sqrt{-1}$ produces stabilizer states, that are quantum states obtained using only Clifford unitaries. These states are also the common eigenvectors of commuting Hermitian matrices forming maximal commutative subgroups (MCS) of the Pauli group. We use this quantum description to simplify the derivation of the classical weight distribution of Kerdock codes. Next, we organize the stabilizer states to form $N+1$ mutually unbiased bases and prove that automorphisms of the Kerdock code permute their corresponding MCS, thereby forming a subgroup of the Clifford group. When represented as symplectic matrices, this subgroup is isomorphic to the projective special linear group PSL($2,N$). We show that this automorphism group acts transitively on the Pauli matrices, which implies that the ensemble is Pauli mixing and hence forms a unitary $2$-design. The Kerdock design described here was originally discovered by Cleve et al. (arXiv:1501.04592), but the connection to classical codes is new which simplifies its description and translation to circuits significantly. Sampling from the design is straightforward, the translation to circuits uses only Clifford gates, and the process does not require ancillary qubits. Finally, we also develop algorithms for optimizing the synthesis of unitary $2$-designs on encoded qubits, i.e., to construct logical unitary $2$-designs. Software implementations are available at https://github.com/nrenga/symplectic-arxiv18a, which we use to provide empirical gate complexities for up to $16$ qubits., Comment: 16 pages double-column, 4 figures, and some circuits. Accepted to 2019 Intl. Symp. Inf. Theory (ISIT), and PDF of the 5-page ISIT version is included in the arXiv package

In order to meet the demands of data-hungry applications, data storage devices are required to be increasingly denser. Various sources of error appear with this increase in density. Multi-dimensional (MD) graph-based codes are capable of mitigating error sources like interference and channel non-uniformity in dense storage devices. Recently, a technique was proposed to enhance the performance of MD spatially-coupled codes that are based on circulants. The technique carefully relocates circulants to minimize the number of short cycles. However, cycles become more detrimental when they combine together to form more advanced objects, e.g., absorbing sets, including low-weight codewords. In this paper, we show how MD relocations can be exploited to minimize the number of detrimental objects in the graph of an MD code. Moreover, we demonstrate the savings in the number of relocation arrangements earned by focusing on objects rather than cycles. Our technique is applicable to a wide variety of one-dimensional (OD) codes. Simulation results reveal significant lifetime gains in practical Flash systems achieved by MD codes designed using our technique compared with OD codes having similar parameters., Comment: 9 pages (double column), 4 figures, the short version was accepted at the IEEE Information Theory Workshop (ITW), this version reflects comments from reviewers at ITW

Line codes make it possible to mitigate interference, to prevent short pulses, and to generate streams of bipolar signals with no direct-current (DC) power content through balancing. They find application in magnetic recording (MR) devices, in Flash devices, in optical recording devices, and in some computer standards. This paper introduces a new family of fixed-length, binary constrained codes, named lexicographically-ordered constrained codes (LOCO codes), for bipolar non-return-to-zero signaling. LOCO codes are capacity-achieving, the lexicographic indexing enables simple, practical encoding and decoding, and this simplicity is demonstrated through analysis of circuit complexity. LOCO codes are easy to balance, and their inherent symmetry minimizes the rate loss with respect to unbalanced codes having the same constraints. Furthermore, LOCO codes that forbid certain patterns can be used to alleviate inter-symbol interference in MR systems and inter-cell interference in Flash systems. Numerical results demonstrate a gain of up to 10% in rate achieved by LOCO codes with respect to other practical constrained codes, including run-length-limited codes, designed for the same purpose. Simulation results suggest that it is possible to achieve a channel density gain of about 20% in MR systems by using a LOCO code to encode only the parity bits, limiting the rate loss, of a low-density parity-check code before writing., Comment: 17 pages (double column), 2 figures, accepted at the IEEE Transactions on Information Theory (TIT), the short version was accepted at the IEEE Information Theory Workshop (ITW), this version reflects comments from reviewers at TIT and ITW

The Clifford hierarchy is a foundational concept for universal quantum computation (UQC). It was introduced to show that UQC can be realized via quantum teleportation, given access to certain standard resources. While the full structure of the hierarchy is still not understood, Cui et al. (arXiv:1608.06596) recently described the structure of diagonal unitaries in the hierarchy. They considered diagonal gates whose action on a computational basis qudit state is described by a $2^k$-th root of unity raised to a polynomial function of the state, and they established the level of such unitaries in the hierarchy. For qubit systems, we consider $k$-th level diagonal gates that can be described just by quadratic forms of the state over the ring $\mathbb{Z}_{2^k}$ of integers mod $2^k$. These involve symmetric matrices over $\mathbb{Z}_{2^k}$ that can be used to efficiently describe all $2$-local and certain higher locality diagonal gates in the hierarchy. We also provide explicit algebraic descriptions of their action on Pauli matrices, which establishes a natural recursion to diagonal gates from lower levels. This involves symplectic matrices over $\mathbb{Z}_{2^k}$ and hence our perspective unifies these gates with the binary symplectic framework for Clifford gates. We augment our description with simple examples for certain standard gates. In addition to demonstrating structure, these formulas might prove useful in applications such as (i) classical simulation of quantum circuits, especially via the stabilizer rank approach, (ii) synthesis of logical non-Clifford unitaries, specifically alternatives to magic state distillation, and (iii) decomposition of arbitrary unitaries beyond the Clifford+$T$ set of gates, perhaps leading to shorter depth circuits. Our results suggest that some non-diagonal gates might be understood by generalizing other binary symplectic matrices to integer rings., Comment: v3: Fixed Theorem 11. v2: Main correction - our framework does not include all diagonal gates but only all 2-local and certain higher-locality ones. All formulas still remain intact. v2 has more examples and remarks for clarity. Abstract updated. PDF marking diff to v1 is included in the package. v1: Presented as a poster in QIP 2019. RevTeX 4.2, 12 pages, two-column, 1 table. Examples included

The problem of completing high-dimensional matrices from a limited set of observations arises in many big data applications, especially, recommender systems. Existing matrix completion models generally follow either a memory- or a model-based approach, whereas, geometric matrix completion models combine the best from both approaches. Existing deep-learning-based geometric models yield good performance, but, in order to operate, they require a fixed structure graph capturing the relationships among the users and items. This graph is typically constructed by evaluating a pre-defined similarity metric on the available observations or by using side information, e.g., user profiles. In contrast, Markov-random-fields-based models do not require a fixed structure graph but rely on handcrafted features to make predictions. When no side information is available and the number of available observations becomes very low, existing solutions are pushed to their limits. In this paper, we propose a geometric matrix completion approach that addresses these challenges. We consider matrix completion as a structured prediction problem in a conditional random field (CRF), which is characterized by a maximum a posterior (MAP) inference, and we propose a deep model that predicts the missing entries by solving the MAP inference problem. The proposed model simultaneously learns the similarities among matrix entries, computes the CRF potentials, and solves the inference problem. Its training is performed in an end-to-end manner, with a method to supervise the learning of entry similarities. Comprehensive experiments demonstrate the superior performance of the proposed model compared to various state-of-the-art models on popular benchmark datasets and underline its superior capacity to deal with highly incomplete matrices., Comment: Accepted to IEEE Transactions on Neural Networks and Learning Systems

Unsourced multiple access abstracts grantless simultaneous communication of a large number of devices (messages) each of which transmits (is transmitted) infrequently. It provides a model for machine-to-machine communication in the Internet of Things (IoT), including the special case of radio-frequency identification (RFID), as well as neighbor discovery in ad hoc wireless networks. This paper presents a fast algorithm for unsourced multiple access that scales to $2^{100}$ devices (arbitrary $100$ bit messages). The primary building block is multiuser detection of binary chirps which are simply codewords in the second order Reed Muller code. The chirp detection algorithm originally presented by Howard et al. is enhanced and integrated into a peeling decoder designed for a patching and slotting framework. In terms of both energy per bit and number of transmitted messages, the proposed algorithm is within a factor of $2$ of state of the art approaches. A significant advantage of our algorithm is its computational efficiency. We prove that the worst-case complexity of the basic chirp reconstruction algorithm is $\mathcal{O}[nK(\log_2 n + K)]$, where $n$ is the codeword length and $K$ is the number of active users, and we report computing times for our algorithm. Our performance and computing time results represent a benchmark against which other practical algorithms can be measured.

This paper introduces a new two-dimensional modulation technique called Orthogonal Time Frequency Space (OTFS) modulation. OTFS has the novel and important feature of being designed in the delay-Doppler domain. When coupled with a suitable equalizer, OTFS modulation is able to exploit the full channel diversity over both time and frequency. Moreover, it converts the fading, time-varying wireless channel experienced by modulated signals such as OFDM into a time-independent channel with a complex channel gain that is essentially constant for all symbols. This design obviates the need for transmitter adaptation, and greatly simplifies system operation. The paper describes the basic operating principles of OTFS as well as a possible implementation as an overlay to current or anticipated standardized systems. OTFS is shown to provide significant performance improvement in systems with high Doppler, short packets, and/or large antenna array. In particular, simulation results indicate at least several dB of block error rate performance improvement for OTFS over OFDM in all of these settings., Comment: 13 pages, 9 figures

Autoencoders are popular among neural-network-based matrix completion models due to their ability to retrieve potential latent factors from the partially observed matrices. Nevertheless, when training data is scarce their performance is significantly degraded due to overfitting. In this paper, we mit- igate overfitting with a data-dependent regularization technique that relies on the principles of multi-task learning. Specifically, we propose an autoencoder-based matrix completion model that performs prediction of the unknown matrix values as a main task, and manifold learning as an auxiliary task. The latter acts as an inductive bias, leading to solutions that generalize better. The proposed model outperforms the existing autoencoder-based models designed for matrix completion, achieving high reconstruction accuracy in well-known datasets., Comment: 5 pages, Eusipco 2018