Search

We apply the HanleRT Tenerife Inversion Code to the spectro-polarimetric observations obtained by the Chromospheric LAyer SpectroPolarimeter. This suborbital space experiment measured the variation with wavelength of the four Stokes parameters in the near-ultraviolet spectral region of the Mg II h & k lines over a solar disk area containing part of an active region plage and the edge of a sunspot penumbra. We infer the stratification of the temperature, the electron density, the line of-sight velocity, the micro-turbulent velocity, and the longitudinal component of the magnetic field from the observed intensity and circular polarization profiles. The inferred model atmosphere shows larger temperature and electron density in the plage and the superpenumbra regions than in the quiet regions. The shape of the plage region in terms of its brightness is similar to the pattern of the inferred longitudinal component of the magnetic field in the chromosphere, as well as to that of the overlying moss observed by AIA in the 171 A band, which suggests a similar magnetic origin for the heating in both the plage and the moss region. Moreover, this heating is particularly significant in the regions with larger inferred magnetic flux. In contrast, in the superpenumbra, the regions with larger electron density and temperature are usually found in between these regions with larger magnetic flux, suggesting that the details of the heating mechanism in the chromosphere of the superpenumbra may be different to those in the plage, but with the magnetic field still playing a key role., Comment: Accepted for publication in the Astrophysical Journal

Dynamic fibrils (DFs) are commonly observed chromospheric features in solar active regions. Recent observations from the Extreme Ultraviolet Imager (EUI) aboard the Solar Orbiter have revealed unambiguous signatures of DFs at the coronal base, in extreme ultraviolet (EUV) emission. However, it remains unclear if the DFs detected in the EUV are linked to their chromospheric counterparts. Simultaneous detection of DFs from chromospheric to coronal temperatures could provide important information on their thermal structuring and evolution through the solar atmosphere. In this paper, we address this question by using coordinated EUV observations from the Atmospheric Imaging Assembly (AIA), Interface Region Imaging Spectrograph (IRIS), and EUI to establish a one-to-one correspondence between chromospheric and transition region DFs (observed by IRIS) with their coronal counterparts (observed by EUI and AIA). Our analysis confirms a close correspondence between DFs observed at different atmospheric layers, and reveals that DFs can reach temperatures of about 1.5 million Kelvin, typical of the coronal base in active regions. Furthermore, intensity evolution of these DFs, as measured by tracking them over time, reveals a shock-driven scenario in which plasma piles up near the tips of these DFs and, subsequently, these tips appear as bright blobs in coronal images. These findings provide information on the thermal structuring of DFs and their evolution and impact through the solar atmosphere., Comment: Accepted for publication in A&A Letters. Animation files are available https://drive.google.com/drive/folders/17-fqQz_P2T18llJ1jB6MJISMRvT5063F?usp=sharing

The Slow Solar Wind Connection Solar Orbiter Observing Plan (Slow Wind SOOP) was developed to utilise the extensive suite of remote sensing and in situ instruments on board the ESA/NASA Solar Orbiter mission to answer significant outstanding questions regarding the origin and formation of the slow solar wind. The Slow Wind SOOP was designed to link remote sensing and in situ measurements of slow wind originating at open-closed field boundaries. The SOOP ran just prior to Solar Orbiter's first close perihelion passage during two remote sensing windows (RSW1 and RSW2) between 2022 March 3-6 and 2022 March 17-22, while Solar Orbiter was at a heliocentric distance of 0.55-0.51 and 0.38-0.34 au from the Sun, respectively. Coordinated observation campaigns were also conducted by Hinode and IRIS. The magnetic connectivity tool was used, along with low latency in situ data, and full-disk remote sensing observations, to guide the target pointing of Solar Orbiter. Solar Orbiter targeted an active region complex during RSW1, the boundary of a coronal hole, and the periphery of a decayed active region during RSW2. Post-observation analysis using the magnetic connectivity tool along with in situ measurements from MAG and SWA/PAS, show that slow solar wind, with velocities between 210 and 600 km/s, arrived at the spacecraft originating from two out of the three of the target regions. The Slow Wind SOOP, despite presenting many challenges, was very successful, providing a blueprint for planning future observation campaigns that rely on the magnetic connectivity of Solar Orbiter., Comment: 24 pages, 10 figures

The origin of the slow solar wind is still an open issue. One possibility that has been suggested is that upflows at the edge of an active region can contribute to the slow solar wind. We aim to explain how the plasma upflows are generated, which mechanisms are responsible for them, and what the upflow region topology looks like. We investigated an upflow region using imaging data with the unprecedented temporal (3s) and spatial (2 pixels = 236km) resolution that were obtained on 30 March 2022 with the 174{\AA} of the Extreme-Ultraviolet Imager (EUI)/High Resolution Imager (HRI) on board Solar Orbiter. During this time, the EUI and Earth-orbiting satellites (Solar Dynamics Observatory, Hinode, and the Interface Region Imaging Spectrograph, IRIS) were located in quadrature (92 degrees), which provides a stereoscopic view with high resolution. We used the Hinode/EIS (Fe XII) spectroscopic data to find coronal upflow regions in the active region. The IRIS slit-jaw imager provides a high-resolution view of the transition region and chromosphere. For the first time, we have data that provide a quadrature view of a coronal upflow region with high spatial resolution. We found extended loops rooted in a coronal upflow region. Plasma upflows at the footpoints of extended loops determined spectroscopically through the Doppler shift are similar to the apparent upward motions seen through imaging in quadrature. The dynamics of small-scale structures in the upflow region can be used to identify two mechanisms of the plasma upflow: Mechanism I is reconnection of the hot coronal loops with open magnetic field lines in the solar corona, and mechanism II is reconnection of the small chromospheric loops with open magnetic field lines in the chromosphere or transition region. We identified the locations in which mechanisms I and II work., Comment: 10 pages, 6 figures, accepted for publication in A&A; manuscript is a part of Astronomy & Astrophysics special issue: Solar Orbiter First Results (Nominal Mission Phase)

Radiative transfer investigations of the solar Mg II h and k resonance lines around 280~nm showed that, while their circular polarization (Stokes V) signals arise from the Zeeman effect, the linear polarization profiles (Stokes Q and U) are dominated by the scattering of anisotropic radiation and the Hanle and magneto-optical (MO) effects. Using the unprecedented observations of the Mg II and Mn I resonance lines obtained by the Chromospheric LAyer Spectro-Polarimeter (CLASP2), here we investigate how the linear polarization signals at different wavelengths (i.e., at the center, and at the near and far wings of the k line) vary with the longitudinal component of the magnetic field ($B_{L}$) at their approximate height of formation. The $B_{L}$ is estimated from the V signals in the aforementioned spectral lines. Particular attention is given to the following quantities that are expected to be influenced by the presence of magnetic fields through the Hanle and MO effects: the sign of the U signals, the total linear polarization amplitude ($LP$) and its direction ($\chi$) with respect to a reference direction. We find that at the center and near wings of the $k$ line, the behavior of these quantities is significantly different in the observed quiet and plage regions, and that both $LP$ and $\chi$ seem to depend on $B_{L}$. These observational results are indicative of the operation of the Hanle effect, Comment: 26 pages, 18 figures, accepted for publication in the Astrophysical Journal

We apply the Tenerife Inversion Code (TIC) to the plage spectropolarimetric observations obtained by the Chromospheric LAyer SpectroPolarimeter (CLASP2). These unprecedented data consist of full Stokes profiles in the spectral region around the Mg II h and k lines for a single slit position, with around two thirds of the 200 arcsec slit crossing a plage region and the rest crossing an enhanced network. A former analysis of these data had allowed us to infer the longitudinal component of the magnetic field by applying the weak field approximation (WFA) to the circular polarization profiles, and to assign the inferred magnetic fields to different layers of the solar atmosphere based on the results of previous theoretical radiative transfer investigations. In this work, we apply the recently developed TIC to the same data. We obtain the stratified model atmosphere that fits the intensity and circular polarization profiles at each position along the spectrograph slit and we compare our results for the longitudinal component of the magnetic field with the previously obtained WFA results, highlighting the generally good agreement in spite of the fact that the WFA is known to produce an underestimation when applied to the outer lobes of the Mg II h and k circular polarization profiles. Finally, we use the inverted model atmospheres to give a rough estimation of the energy that could be carried by Alfv\`en waves propagating along the chromosphere in the plage and network regions, showing that it is sufficient to compensate the estimated energy losses in the chromosphere of solar active regions., Comment: Accepted for publication in The Astrophysical Journal

Solaris is a transformative Solar Polar Discovery-class mission concept to address crucial outstanding questions that can only be answered from a polar vantage. Solaris will image the Sun's poles from ~75 degree latitude, providing new insight into the workings of the solar dynamo and the solar cycle, which are at the foundation of our understanding of space weather and space climate. Solaris will also provide enabling observations for improved space weather research, modeling and prediction, revealing a unique, new view of the corona, coronal dynamics and CME eruptions from above., Comment: This White Paper was submitted in 2022 to the United States National Academies Solar and Space Physics (Heliophysics) Decadal Survey

Due to its physical nature, the solar corona exhibits large spatial variations of intensity that make it difficult to simultaneously visualize the features present at all levels and scales. Many general-purpose and specialized filters have been proposed to enhance coronal images. However, most of them require the ad hoc tweaking of parameters to produce subjectively good results. Our aim was to develop a general purpose image enhancement technique that would produce equally good results, but based on an objective criterion. The underlying principle of the method is the equalization, or whitening, of power in the {\it \`a trous} wavelet spectrum of the input image at all scales and locations. An edge-avoiding modification of the {\it \`a trous} transform that uses bilateral weighting by the local variance in the wavelet planes is used to suppress the undesirable halos otherwise produced by discontinuities in the data. Results are presented for a variety of extreme ultraviolet (EUV) and white light images of the solar corona. The proposed filter produces sharp and contrasted output, without requiring the manual adjustment of parameters. Furthermore, the built-in denoising scheme prevents the explosion of high-frequency noise typical of other enhancement methods, without smoothing statistically significant small-scale features. The standard version of the algorithm is about two times faster than the widely used multiscale Gaussian normalization (MGN). The bilateral version is slower, but provides significantly better results in the presence of spikes or edges. Comparisons with other methods suggest that the whitening principle may correspond to the subjective criterion of most users when adjusting free parameters.

The solar chromosphere hosts a wide variety of transients, including dynamic fibrils (DFs) that are characterised as elongated, jet-like features seen in active regions, often through H$\alpha$ diagnostics. So far, these features have been difficult to identify in coronal images primarily due to their small size and the lower spatial resolution of the current EUV imagers. Here we present the first unambiguous signatures of DFs in coronal EUV data using high-resolution images from the Extreme Ultraviolet Imager (EUI) on board Solar Orbiter. Using the data acquired with the 174~{\AA} High Resolution Imager (HRI$_{EUV}$) of EUI, we find many bright dot-like features (of size 0.3-0.5 Mm) that move up and down (often repeatedly) in the core of an active region. In a space-time map, these features produce parabolic tracks akin to the chromospheric observations of DFs. Properties such as their speeds (14 km~s$^{-1}$), lifetime (332~s), deceleration (82 m~s$^{-2}$) and lengths (1293~km) are also reminiscent of the chromospheric DFs. The EUI data strongly suggest that these EUV bright dots are basically the hot tips (of the cooler chromospheric DFs) that could not be identified unambiguously before because of a lack of spatial resolution., Comment: Accepted for publication in A&A Letters. Event movie can be downloaded from https://drive.google.com/file/d/1o_4jHA5JbyQtrpUBtB3ItE_s3HjF6ncc/view?usp=sharing

We present a new method of removing PSF artifacts and improving the resolution of multidimensional data sources including imagers and spectrographs. Rather than deconvolution, which is translationally invariant, this method is based on sparse matrix solvers. This allows it to be applied to spatially varying PSFs and also to combining observations from instruments with radically different spatial, spectral, or thermal response functions (e.g., SDO/AIA and RHESSI). It was developed to correct PSF artifacts in Solar Orbiter SPICE, so the motivation, presentation of the method, and the results revolve around that application. However, it can also be used as a more robust (e.g., WRT a varying PSFs) alternative to deconvolution of 2D image data and similar problems, and is relevant to more general linear inversion problems., Comment: 27 pages, 14 figures. Submitted to Astronomy & Astrophysics special issue. This first replacement version switches to A&A style and adds a funding acknowledgement

The High Resolution Imager (HRI_EUV) telescope of the Extreme Ultraviolet Imager (EUI) instrument onboard Solar Orbiter has observed EUV brightenings, so-called campfires, as fine-scale structures at coronal temperatures. The goal of this paper is to compare the basic geometrical (size, orientation) and physical (intensity, lifetime) properties of the EUV brightenings with regions of energy dissipation in a non-potential coronal magnetic field simulation. In the simulation, HMI line-of-sight magnetograms are used as input to drive the evolution of solar coronal magnetic fields and energy dissipation. We applied an automatic EUV brightening detection method to EUV images obtained on 30 May 2020 by the HRI_EUV telescope. We applied the same detection method to the simulated energy dissipation maps from the non-potential simulation to detect simulated brightenings. We detected EUV brightenings with density of 1.41x10^{-3} brightenings/Mm^2 in the EUI observations and simulated brightenings between 2.76x10^{-2} - 4.14x10^{-2} brightenings/Mm^2 in the simulation, for the same time range. Although significantly more brightenings were produced in the simulations, the results show similar distributions of the key geometrical and physical properties of the observed and simulated brightenings. We conclude that the non-potential simulation can successfully reproduce statistically the characteristic properties of the EUV brightenings (typically with more than 85% similarity); only the duration of the events is significantly different between observations and simulation. Further investigations based on high-cadence and high-resolution magnetograms from Solar Orbiter are under consideration to improve the agreement between observation and simulation., Comment: 23 pages, 8 figures; Paper accepted to publication in Solar Physics

A key goal of the Solar Orbiter mission is to connect elemental abundance measurements of the solar wind enveloping the spacecraft with EUV spectroscopic observations of their solar sources, but this is not an easy exercise. Observations from previous missions have revealed a highly complex picture of spatial and temporal variations of elemental abundances in the solar corona. We have used coordinated observations from Hinode and Solar Orbiter to attempt new abundance measurements with the SPICE (Spectral Imaging of the Coronal Environment) instrument, and benchmark them against standard analyses from EIS (EUV Imaging Spectrometer). We use observations of several solar features in AR 12781 taken from an Earth-facing view by EIS on 2020 November 10, and SPICE data obtained one week later on 2020 November 17; when the AR had rotated into the Solar Orbiter field-of-view. We identify a range of spectral lines that are useful for determining the transition region and low coronal temperature structure with SPICE, and demonstrate that SPICE measurements are able to differentiate between photospheric and coronal Mg/Ne abundances. The combination of SPICE and EIS is able to establish the atmospheric composition structure of a fan loop/outflow area at the active region edge. We also discuss the problem of resolving the degree of elemental fractionation with SPICE, which is more challenging without further constraints on the temperature structure, and comment on what that can tell us about the sources of the solar wind and solar energetic particles., Comment: To be published in The Astrophysical Journal

Solar filament oscillations have been known for decades. Now thanks to the new capabilities of the new telescopes, these periodic motions are routinely observed. Oscillations in filaments show key aspects of their structure. A systematic study of filament oscillations over the solar cycle can shed light on the evolution of the prominences. This work is a proof of concept that aims to automatically detect and parameterise such oscillations using H$\alpha$ data from the GONG network of telescopes. The proposed technique studies the periodic fluctuations of every pixel of the H$\alpha$ data cubes. Using the FFT we compute the power spectral density (PSD). We define a criterion to consider whether it is a real oscillation or whether it is a spurious fluctuation. This consists in considering that the peak in the PSD must be greater than several times the background noise with a confidence level of 95\%. The background noise is well fitted to a combination of red and white noise. We applied the method to several observations already reported in the literature to determine its reliability. We also applied the method to a test case, which is a data set in which the oscillations of the filaments were not known a priori. The method shows that there are areas in the filaments with PSD above the threshold value. The periodicities obtained are in general agreement with the values obtained by other methods. In the test case, the method detects oscillations in several filaments. We conclude that the proposed spectral technique is a powerful tool to automatically detect oscillations in prominences using H$\alpha$ data., Comment: Accepted for publication in Astronomy & Astrophysics Journal

We study here the phenomena of decayless kink oscillations in a system of active region (AR) coronal loops. Using high resolution observations from two different instruments, namely the Extreme Ultraviolet Imager (EUI) on board Solar Orbiter and the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory, we follow these AR loops for an hour each on three consecutive days. Our results show significantly more resolved decayless waves in the higher-resolution EUI data compared with the AIA data. Furthermore, the same system of loops exhibits many of these decayless oscillations on Day-2, while on Day-3, we detect very few oscillations and on Day-1, we find none at all. Analysis of photospheric magnetic field data reveals that at most times, these loops were rooted in sunspots, where supergranular flows are generally absent. This suggests that supergranular flows, which are often invoked as drivers of decayless waves, are not necessarily driving such oscillations in our observations. Similarly, our findings also cast doubt on other possible drivers of these waves, such as a transient driver or mode conversion of longitudinal waves near the loop footpoints. In conclusion, through our analysis we find that none of the commonly suspected sources proposed to drive decayless oscillations in active region loops seems to be operating in this event and hence, the search for that elusive wave driver needs to continue., Comment: Accepted for publication in A&A Letters. Event movies can be downloaded from https://drive.google.com/drive/folders/1IFH17oBwJuz2U5zR4Ds_Y4oU5ZQCaVbR?usp=sharing

Switchbacks are sudden, large radial deflections of the solar wind magnetic field, widely revealed in interplanetary space by the Parker Solar Probe. The switchbacks' formation mechanism and sources are still unresolved, although candidate mechanisms include Alfv\'enic turbulence, shear-driven Kelvin-Helmholtz instabilities, interchange reconnection, and geometrical effects related to the Parker spiral. This Letter presents observations from the Metis coronagraph onboard Solar Orbiter of a single large propagating S-shaped vortex, interpreted as first evidence of a switchback in the solar corona. It originated above an active region with the related loop system bounded by open-field regions to the East and West. Observations, modeling, and theory provide strong arguments in favor of the interchange reconnection origin of switchbacks. Metis measurements suggest that the initiation of the switchback may also be an indicator of the origin of slow solar wind.

We present an observational study of the plasma dynamics at the base of a solar coronal jet, using high resolution extreme ultraviolet imaging data taken by the Extreme Ultraviolet Imager on board Solar Orbiter, and by the Atmospheric Imaging Assembly on board Solar Dynamics Observatory. We observed multiple plasma ejection events over a period of $\sim$1 hour from a dome-like base that is ca.~4 Mm wide and is embedded in a polar coronal hole. Within the dome below the jet spire, multiple plasma blobs with sizes around 1--2 Mm propagate upwards to dome apex with speeds of the order of the sound speed (ca.~120~km~s$^{-1}$ ). Upon reaching the apex, some of these blobs initiate flows with similar speeds towards the other footpoint of the dome. At the same time, high speed super-sonic outflows ($\sim$230~km~s$^{-1}$) are detected along the jet spire. These outflows as well as the intensity near the dome apex appear to be repetitive. Furthermore, during its evolution, the jet undergoes many complex morphological changes including transitions between the standard and blowout type eruption. These new observational results highlight the underlying complexity of the reconnection process that powers these jets and also provide insights into the plasma response when subjected to rapid energy injection., Comment: Accepted for publication in A&A. Event movies can be found here https://drive.google.com/drive/folders/1Pxz7Bkjs0ED5giE1AMabtywVkJU97rSb?usp=sharing

The physical properties responsible for the formation and evolution of the corona and heliosphere are still not completely understood. 3D MHD global modeling is a powerful tool to investigate all the possible candidate processes. To fully understand the role of each of them, we need a validation process where the output from the simulations is quantitatively compared to the observational data. In this work, we present the results from our validation process applied to the wave turbulence driven 3D MHD corona-wind model WindPredict-AW. At this stage of the model development, we focus the work to the coronal regime in quiescent condition. We analyze three simulations results, which differ by the boundary values. We use the 3D distributions of density and temperature, output from the simulations at the time of around the First Parker Solar Probe perihelion (during minimum of the solar activity), to synthesize both extreme ultraviolet (EUV) and white light polarized (WL pB) images to reproduce the observed solar corona. For these tests, we selected AIA 193 A, 211 A and 171 A EUV emissions, MLSO K-Cor and LASCO C2 pB images obtained the 6 and 7 November 2018. We then make quantitative comparisons of the disk and off limb corona. We show that our model is able to produce synthetic images comparable to those of the observed corona., Comment: in press

Brightenings observed in the solar extreme-ultraviolet (EUV) images are generally interpreted as signatures of micro- or nanoflares occurring at the transition region or coronal temperatures. Recent observations with the Extreme Ultraviolet Imager (EUI) on board Solar Orbiter have revealed the smallest of such brightenings (termed campfires) in the quiet-Sun corona. Analyzing EUI 174 {\AA} data at a resolution of about 400 km on the Sun with a cadence of 5 s from 30-May-2020, we report here a number of cases where these campfires exhibit propagating signatures along their apparent small (3-5 Mm) loop-like structures. Measured propagation speeds are generally between 25 km s$^{-1}$ and 60 km s$^{-1}$. These apparent motions would be slower than the local sound speed if the loop plasma is assumed to be at a million Kelvin. Furthermore, these brightenings exhibit non-trivial propagation characteristics such as bifurcation, merging, reflection and repeated plasma ejections. We suggest that these features are manifestations of the internal dynamics of these small-scale magnetic structures and could provide important insights into the dynamic response ($\sim$40 s) of the loop plasma to the heating events as well as into the locations of the heating events themselves., Comment: Accepted for publications in A&A Letters. Associated event movies can be accessed via this link: https://drive.google.com/drive/folders/18V25k61PEWISF2UlS0vjiSIHdEyrla28?usp=sharing

This Letter addresses the first Solar Orbiter (SO) -- Parker Solar Probe (PSP) quadrature, occurring on January 18, 2021, to investigate the evolution of solar wind from the extended corona to the inner heliosphere. Assuming ballistic propagation, the same plasma volume observed remotely in corona at altitudes between 3.5 and 6.3 solar radii above the solar limb with the Metis coronagraph on SO can be tracked to PSP, orbiting at 0.1 au, thus allowing the local properties of the solar wind to be linked to the coronal source region from where it originated. Thanks to the close approach of PSP to the Sun and the simultaneous Metis observation of the solar corona, the flow-aligned magnetic field and the bulk kinetic energy flux density can be empirically inferred along the coronal current sheet with an unprecedented accuracy, allowing in particular estimation of the Alfv\'en radius at 8.7 solar radii during the time of this event. This is thus the very first study of the same solar wind plasma as it expands from the sub-Alfv\'enic solar corona to just above the Alfv\'en surface., Comment: 10 pages, 4 figures

Context: Thermal non-equilibrium (TNE) produces several observables that can be used to constrain the spatial and temporal distribution of solar coronal heating. Its manifestations include prominence formation, coronal rain, and long-period intensity pulsations in coronal loops. The recent observation of abundant periodic coronal rain associated with intensity pulsations by Auch\`ere et al. allows to unify these two phenomena as the result of TNE condensation and evaporation cycles. On the other hand, many intensity pulsation events observed by Froment et al. show little to no coronal rain formation. Aims: Our goal is to understand why some TNE cycles produce such abundant coronal rain, while others produce little to no rain. Methods: We reconstruct the geometry of the event reported by Auch\`ere et al., using images from STEREO/SECCHI/EUVI and magnetograms from SDO/HMI. We then perform 1D hydrodynamic simulations of this event, for different heating parameters and variations of the loop geometry (9000 simulations in total). We compare the resulting behaviour to simulations of TNE cycles by Froment et al. that do not produce coronal rain. Results: Our simulations show that both prominences and TNE cycles (with and without coronal rain) can form within the same magnetic structure. We show that the formation of coronal rain during TNE cycles depends on the asymmetry of the loop and of the heating. Asymmetric loops are overall less likely to produce coronal rain, regardless of the heating. In symmetric loops, coronal rain forms when the heating is also symmetric. In asymmetric loops, rain forms only when the heating compensates the asymmetry., Comment: Accepted for publication in A&A. 15 pages, 8 figures

Solar campfires are fine-scale heating events, recently observed by Extreme Ultraviolet Imager (EUI), onboard Solar Orbiter. Here we use EUI 174\AA\ images, together with EUV images from SDO/AIA, and line-of-sight magnetograms from SDO/HMI to investigate the magnetic origin of 52 randomly selected campfires in the quiet solar corona. We find that (i) the campfires are rooted at the edges of photospheric magnetic network lanes; (ii) most of the campfires reside above the neutral line between majority-polarity magnetic flux patch and a merging minority-polarity flux patch, with a flux cancelation rate of $\sim$10$^{18}$Mx hr$^{-1}$; (iii) some of the campfires occur repeatedly from the same neutral line; (iv) in the large majority of instances, campfires are preceded by a cool-plasma structure, analogous to minifilaments in coronal jets; and (v) although many campfires have `complex' structure, most campfires resemble small-scale jets, dots, or loops. Thus, `campfire' is a general term that includes different types of small-scale solar dynamic features. They contain sufficient magnetic energy ($\sim$10$^{26}$-10$^{27}$ erg) to heat the solar atmosphere locally to 0.5--2.5MK. Their lifetimes range from about a minute to over an hour, with most of the campfires having a lifetime of $<$10 minutes. The average lengths and widths of the campfires are 5400$\pm$2500km and 1600$\pm$640km, respectively. Our observations suggest that (a) the presence of magnetic flux ropes may be ubiquitous in the solar atmosphere and not limited to coronal jets and larger-scale eruptions that make CMEs, and (b) magnetic flux cancelation is the fundamental process for the formation and triggering of most campfires., Comment: Accepted for publication in ApJ Letters, 20 Pages, 1 Table, 12 Figures

Routine ultraviolet imaging of the Sun's upper atmosphere shows the spectacular manifestation of solar activity; yet we remain blind to its main driver, the magnetic field. Here we report unprecedented spectropolarimetric observations of an active region plage and its surrounding enhanced network, showing circular polarization in ultraviolet (Mg II $h$ & $k$ and Mn I) and visible (Fe I) lines. We infer the longitudinal magnetic field from the photosphere to the very upper chromosphere. At the top of the plage chromosphere the field strengths reach more than 300 gauss, strongly correlated with the Mg II $k$ line core intensity and the electron pressure. This unique mapping shows how the magnetic field couples the different atmospheric layers and reveals the magnetic origin of the heating in the plage chromosphere., Comment: 50 pages, 11 figures, 1 table, published in Science Advances

Context: Long-period intensity pulsations were recently detected in the EUV emission of coronal loops, and have been attributed to cycles of plasma evaporation and condensation driven by thermal non-equilibrium (TNE). Numerical simulations that reproduce this phenomenon also predict the formation of periodic flows of plasma at coronal temperatures along some of the pulsating loops. Aims: In this paper, we aim at detecting these predicted flows of coronal-temperature plasma in pulsating loops. Methods: To this end, we use time series of spatially resolved spectra from the EUV imaging spectrometer (EIS) onboard Hinode, and track the evolution of the Doppler velocity in loops in which intensity pulsations have previously been detected in images of SDO/AIA. Results: We measure signatures of flows that are compatible with the simulations, but only in a fraction of the observed events. We demonstrate that this low detection rate can be explained by line of sight ambiguities, combined with instrumental limitations such as low signal to noise ratio or insufficient cadence., Comment: Accepted for publication in A&A. 16 pages, 16 figures

Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7 $R_\odot$ to about 9 $R_\odot$. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close vantage point (down to 0.28 AU), achieving out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, will allow longer-term studies of the coronal features. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H I Lyman-{\alpha} line at 121.6 nm. The coronal images in both the UV Lyman-{\alpha} and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 second can be achieved when observing coronal fluctuations in visible light. The Metis measurements will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes acceleration and where the onset and initial propagation of coronal mass ejections take place, thus significantly improving our understanding of the region connecting the Sun to the heliosphere.

We present a new coalignment method for the EUV Imaging Spectrometer (EIS) on board the Hinode spacecraft. In addition to the pointing offset and spacecraft jitter, this method determines the roll angle of the instrument, which has never been systematically measured, and is therefore usually not corrected. The optimal pointing for EIS is computed by maximizing the cross-correlations of the Fe XII 195.119 \r{A} line with images from the 193 \r{A} band of the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). By coaligning 3336 rasters with high signal-to-noise ratio, we estimate the rotation angle between EIS and AIA and explore the distribution of its values. We report an average value of (-0.387 $\pm$ 0.007)\deg. We also provide a software implementation of this method that can be used to coalign any EIS raster., Comment: Accepted for publication in Solar Physics, 11 pages, 7 figures

In this paper, we detail the scientific objectives and outline a strawman payload of the SOLAR sail Investigation of the Sun (SOLARIS). The science objectives are to study the 3D structure of the solar magnetic and velocity field, the variation of total solar irradiance with latitude, and the structure of the corona. We show how we can meet these science objective using solar-sail technologies currently under development. We provide a tentative mission profile considering several trade-off approaches. We also provide a tentative mass budget breakdown and a perspective for a programmatic implementation.

In solar coronal loops, thermal non-equilibrium (TNE) is a phenomenon that can occur when the heating is both highly-stratified and quasi-constant. Unambiguous observational identification of TNE would thus permit to strongly constrain heating scenarios. Up to now, while TNE is the standard interpretation of coronal rain, the long-term periodic evolution predicted by simulations has never been observed yet. However, the detection of long-period intensity pulsations (periods of several hours) has been recently reported with SoHO/EIT, and this phenomenon appears to be very common in loops. Moreover, the three intensity-pulsation events that we recently studied with SDO/AIA show strong evidence for TNE in warm loops. In the present paper, a realistic loop geometry from LFFF extrapolations is used as input to 1D hydrodynamic simulations. Our simulations show that for the present loop geometry, the heating has to be asymmetrical to produce TNE. We analyse in detail one particular simulation that reproduces the average thermal behavior of one of the pulsating loop bundle observed with AIA. We compare the properties of this simulation with the properties deduced from the observations. The magnetic topology of the LFFF extrapolations points to the presence of sites of preferred reconnection at one footpoint, supporting the presence of asymmetric heating. In addition, we can reproduce the temporal large-scale intensity properties of the pulsating loops. This simulation further strengthens the interpretation of the observed pulsations as signatures of TNE. This thus gives important information on the heating localization and time scale for these loops., Comment: 17 pages, 12 figures, accepted for publication in The Astrophysical journal

Quasi-constant heating at the footpoints of loops leads to evaporation and condensation cycles of the plasma: thermal non-equilibrium (TNE). This phenomenon is believed to play a role in the formation of prominences and coronal rain. However, it is often discarded to be involved in the heating of warm loops as the models do not reproduce observations. Recent simulations have shown that these inconsistencies with observations may be due to oversimplifications of the geometries of the models. In addition, our recent observations reveal that long-period intensity pulsations (several hours) are common in solar coronal loops. These periods are consistent with those expected from TNE. The aim of this paper is to derive characteristic physical properties of the plasma for some of these events to test the potential role of TNE in loop heating. We analyzed three events in detail using the six EUV coronal channels of SDO/AIA. We performed both a Differential Emission Measure (DEM) and a time-lag analysis, including a new method to isolate the relevant signal from the foreground and background emission. For the three events, the DEM undergoes long-period pulsations, which is a signature of periodic heating even though the loops are captured in their cooling phase, as is the bulk of the active regions. We link long-period intensity pulsations to new signatures of loop heating with strong evidence for evaporation and condensation cycles. We thus witness simultaneously widespread cooling and TNE. Finally, we discuss the implications of our new observations for both static and impulsive heating models., Comment: 40 pages, 30 figures, accepted for publication in the Astrophysical Journal, v2: corrected typos

In this paper, the ability of the Hinode/EIS instrument to detect radiative signatures of coronal heating is investigated. Recent observational studies of AR cores suggest that both the low and high frequency heating mechanisms are consistent with observations. Distinguishing between these possibilities is important for identifying the physical mechanism(s) of the heating. The Differential Emission Measure (DEM) tool is one diagnostic that allows to make this distinction, through the amplitude of the DEM slope coolward of the coronal peak. It is therefore crucial to understand the uncertainties associated with these measurements. Using proper estimations of the uncertainties involved in the problem of DEM inversion, we derive confidence levels on the observed DEM slope. Results show that the uncertainty in the slope reconstruction strongly depends on the number of lines constraining the slope. Typical uncertainty is estimated to be about $\pm 1.0$, in the more favorable cases., Comment: 29 pages, 8 figures

The Differential Emission Measure (DEM) analysis is one of the most used diagnostic tools for solar and stellar coronae. Being an inverse problem, it has limitations due to the presence of random and systematic errors. We present in theses series of papers an analysis of the robustness of the inversion in the case of AIA/SDO observations. We completely characterize the DEM inversion and its statistical properties, providing all the solutions consistent with the data along with their associated probabilities, and a test of the suitability of the assumed DEM model. While Paper I focused on isothermal conditions, we now consider multi-thermal plasmas and investigate both isothermal and multithermal solutions. We demonstrate how the ambiguity between noises and multi-thermality fundamentally limits the temperature resolution of the inversion. We show that if the observed plasma is multi-thermal, isothermal solutions tend to cluster on a constant temperature whatever the number of passbands or spectral lines. The multi-thermal solutions are also found to be biased toward near isothermal solutions around 1 MK. This is true even if the residuals support the chosen DEM model, possibly leading to erroneous conclusions on the observed plasma. We propose tools to identify and quantify the possible degeneracy of solutions, thus helping the interpretation of DEM inversion., Comment: 24 pages, 12 figures

DEM analysis is a major diagnostic tool for stellar atmospheres. But both its derivation and its interpretation are notably difficult because of random and systematic errors, and the inverse nature of the problem. We use simulations with simple thermal distributions to investigate the inversion properties of SDO/AIA observations of the solar corona. This allows a systematic exploration of the parameter space and using a statistical approach, the respective probabilities of all the DEMs compatible with the uncertainties can be computed. Following this methodology, several important properties of the DEM inversion, including new limitations, can be derived and presented in a very synthetic fashion. In this first paper, we describe the formalism and we focus on isothermal plasmas, as building blocks to understand the more complex DEMs studied in the second paper. The behavior of the inversion of AIA data being thus quantified, and we provide new tools to properly interpret the DEM. We quantify the improvement of the isothermal inversion with 6 AIA bands compared to previous EUV imagers. The maximum temperature resolution of AIA is found to be 0.03 log Te, and we derive a rigorous test to quantify the compatibility of observations with the isothermal hypothesis. However we demonstrate limitations in the ability of AIA alone to distinguish different physical conditions., Comment: 22 pages, 8 figures

Understanding the solar outer atmosphere requires concerted, simultaneous solar observations from the visible to the vacuum ultraviolet (VUV) and soft X-rays, at high spatial resolution (between 0.1" and 0.3"), at high temporal resolution (on the order of 10 s, i.e., the time scale of chromospheric dynamics), with a wide temperature coverage (0.01 MK to 20 MK, from the chromosphere to the flaring corona), and the capability of measuring magnetic fields through spectropolarimetry at visible and near-infrared wavelengths. Simultaneous spectroscopic measurements sampling the entire temperature range are particularly important. These requirements are fulfilled by the Japanese Solar-C mission (Plan B), composed of a spacecraft in a geosynchronous orbit with a payload providing a significant improvement of imaging and spectropolarimetric capabilities in the UV, visible, and near-infrared with respect to what is available today and foreseen in the near future. The Large European Module for solar Ultraviolet Research (LEMUR), described in this paper, is a large VUV telescope feeding a scientific payload of high-resolution imaging spectrographs and cameras. LEMUR consists of two major components: a VUV solar telescope with a 30 cm diameter mirror and a focal length of 3.6 m, and a focal-plane package composed of VUV spectrometers covering six carefully chosen wavelength ranges between 17 and 127 nm. The LEMUR slit covers 280" on the Sun with 0.14" per pixel sampling. In addition, LEMUR is capable of measuring mass flows velocities (line shifts) down to 2 km/s or better. LEMUR has been proposed to ESA as the European contribution to the Solar C mission., Comment: 35 pages, 14 figures. To appear on Experimental Astronomy

Coronal mass ejections (CMEs) and corotating interaction regions (CIRs) as well as their source regions are important because of their space weather consequences. The current understanding of CMEs primarily comes from the Solar and Heliospheric Observatory (SOHO) and the Solar Terrestrial Relations Observatory (STEREO) missions, but these missions lacked some key measurements: STEREO did not have a magnetograph; SOHO did not have in-situ magnetometer. SOHO and other imagers such as the Solar Mass Ejection Imager (SMEI) located on the Sun-Earth line are also not well-suited to measure Earth-directed CMEs. The Earth-Affecting Solar Causes Observatory (EASCO) is a proposed mission to be located at the Sun-Earth L5 that overcomes these deficiencies. The mission concept was recently studied at the Mission Design Laboratory (MDL), NASA Goddard Space Flight Center, to see how the mission can be implemented. The study found that the scientific payload (seven remote-sensing and three in-situ instruments) can be readily accommodated and can be launched using an intermediate size vehicle; a hybrid propulsion system consisting of a Xenon ion thruster and hydrazine has been found to be adequate to place the payload at L5. Following a 2-year transfer time, a 4-year operation is considered around the next solar maximum in 2025., Comment: 12 pages, 6 figures, 2 tables

Solar tomography has progressed rapidly in recent years thanks to the development of robust algorithms and the availability of more powerful computers. It can today provide crucial insights in solving issues related to the line-of-sight integration present in the data of solar imagers and coronagraphs. However, there remain challenges such as the increase of the available volume of data, the handling of the temporal evolution of the observed structures, and the heterogeneity of the data in multi-spacecraft studies. We present a generic software package that can perform fast tomographic inversions that scales linearly with the number of measurements, linearly with the length of the reconstruction cube (and not the number of voxels) and linearly with the number of cores and can use data from different sources and with a variety of physical models: TomograPy (http://nbarbey.github.com/TomograPy/), an open-source software freely available on the Python Package Index. For performance, TomograPy uses a parallelized-projection algorithm. It relies on the World Coordinate System standard to manage various data sources. A variety of inversion algorithms are provided to perform the tomographic-map estimation. A test suite is provided along with the code to ensure software quality. Since it makes use of the Siddon algorithm it is restricted to rectangular parallelepiped voxels but the spherical geometry of the corona can be handled through proper use of priors. We describe the main features of the code and show three practical examples of multi-spacecraft tomographic inversions using STEREO/EUVI and STEREO/COR1 data. Static and smoothly varying temporal evolution models are presented., Comment: 21 pages, 6 figures, 5 tables

An important issue in the tomographic reconstruction of the solar poles is the relatively rapid evolution of the polar plumes. We demonstrate that it is possible to take into account this temporal evolution in the reconstruction. The difficulty of this problem comes from the fact that we want a 4D reconstruction (three spatial dimensions plus time) while we only have 3D data (2D images plus time). To overcome this difficulty, we introduce a model that describes polar plumes as stationary objects whose intensity varies homogeneously with time. This assumption can be physically justified if one accepts the stability of the magnetic structure. This model leads to a bilinear inverse problem. We describe how to extend linear inversion methods to these kinds of problems. Studies of simulations show the reliability of our method. Results for SOHO/EIT data show that we are able to estimate the temporal evolution of polar plumes in order to improve the reconstruction of the solar poles from only one point of view. We expect further improvements from STEREO/EUVI data when the two probes will be separated by about 60 degrees.

Who cares? Magnetograms in the upper chromosphere are needed for accurate magnetic coronal extrapolations. The CLASP2 sounding rocket took spatially resolved spectropolarimetric data of Mg II h & k in the upper chromosphere, that can be used as a pathfinder to routine magnetograms. This work: Preliminary results of the center-to-limb variation (CLV) of the linear polarization in the quiet sun. We compare the signals to recent theoretical calculations of the expected polarization which include PRD, J-state interference, and magneto-optical effects.

"Chromospheric LAyer Spectro-Polarimeter (CLASP2)" is the next sounding rocket experiment of the "Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP)" that succeeded in observing for the first time the linear polarization spectra in the hydrogen Lyman- line (121.6 nm) and is scheduled to be launched in 2019. In CLASP2, we will carry out full Stokes-vector spectropolarimetric observations in the Mg II h & k lines near 280 nm with the spectro-polarimeter (SP), while imaging observations in the Lyman- line will be conducted with the slitjaw optics (SJ). For the wavelength selection of CLASP2, the primary mirror of the telescope uses a new dual-band pass cold mirror coating targeting both at 121.6 nm and 280 nm. Therefore, we have to perform again the alignment of the telescope after the installation of the recoated primary mirror. Before unmounting the primary mirror from the telescope structure, we measured the wave-front error (WFE) of the telescope. The measured WFE map was consistent with what we had before the CLASP flight, clearly indicating that the telescope alignment has been maintained even after the flight. After the re-coated primary mirror was installed the WFE was measured, and coma aberration was found to be larger. Finally, the secondary mirror shim adjustments were carried out based on the WFE measurements. In CLASP2 telescope, we improved a fitting method of WFE map (applying 8th terms circular Zernike polynomial tting instead of 37th terms circular Zernike fitting) and the improved method enables to achieve better performance than CLASP telescope. Indeed, WFE map obtained after the final shim adjustment indicated that the required specification (< 5:5 m RMS spot radius) that is more stringent than CLASP telescope was met.

A major remaining challenge for heliophysics is to decipher the magnetic structure of the chromosphere. The chromosphere is the critical interface between the Sun's photosphere and corona: it contains more mass than the entire interplanetary heliosphere, requires a heating rate that is larger than that of the corona, and mediates all the energy driving the solar wind, solar atmospheric heating and solar eruptions. While measurements of the magnetic field in the photosphere are routine, the chromosphere poses several extra challenges. The magnetically sensitive lines formed in the upper chromosphere are in the ultraviolet, so space-based observations are required. The lines are often formed over a range of heights, sampling different plasma which complicates the inversion process. These lines are sensitive to the magnetic field via polarized light that is created or modified through the Hanle and Zeeman effects. There are a few observations of these lines, and a significant challenge remains in extracting the magnetic field from the polarization measurements, as detailed model atmospheres with advanced radiative transfer physics are needed. Real progress is obtained by a simultaneous improvement in both the observational side and the modeling side. We present information on the CLASP (Chromospheric LAyer Spectro-Polarimeter) sounding rocket program, and future prospects for these types of measurements.

The sounding rocket Chromospheric Lyman-Alpha SpectroPolarimeter (CLASP) was launched on September 3rd, 2015, and successfully detected (with a polarization accuracy of 0.1 %) the linear polarization signals (Stokes Q and U) that scattering processes were predicted to produce in the hydrogen Lyman-alpha line (Ly; 121.567 nm). Via the Hanle effect, this unique data set may provide novel information about the magnetic structure and energetics in the upper solar chromosphere. The CLASP instrument was safely recovered without any damage and we have recently proposed to dedicate its second ight to observe the four Stokes profiles in the spectral region of the Mg II h and k lines around 280 nm; in these lines the polarization signals result from scattering processes and the Hanle and Zeeman effects. Here we describe the modifications needed to develop this new instrument called the "Chromospheric LAyer SpectroPolarimeter" (CLASP2).

We are planning an international rocket experiment Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is (2015 planned) that Lyman α line (Ly(alpha) line) polarization spectroscopic observations from the sun. The purpose of this experiment, detected with high accuracy of the linear polarization of the Ly(alpha) lines to 0.1% by using a Hanle effect is to measure the magnetic field of the chromosphere-transition layer directly. For polarization photometric accuracy achieved that approx. 0.1% required for CLASP, it is necessary to realize the monitoring device with a high throughput. On the other hand, Ly(alpha) line (vacuum ultraviolet rays) have a sensitive characteristics that is absorbed by the material. We therefore set the optical system of the reflection system (transmission only the wavelength plate), each of the mirrors, subjected to high efficiency of the multilayer coating in accordance with the role. Primary mirror diameter of CLASP is about 30 cm, the amount of heat about 30,000 J is about 5 minutes of observation time is coming mainly in the visible light to the telescope. In addition, total flux of the sun visible light overwhelmingly large and about 200 000 times the Ly(alpha) line wavelength region. Therefore, in terms of thermal management and 0.1% of the photometric measurement accuracy achieved telescope, elimination of the visible light is essential. We therefore, has a high reflectivity (> 50%) in Lyα line, visible light is a multilayer coating be kept to a low reflectance (<5%) (cold mirror coating) was applied to the primary mirror. On the other hand, the efficiency of the polarization analyzer required chromospheric magnetic field measurement (the amount of light) Conventional (magnesium fluoride has long been known as a material for vacuum ultraviolet (MgF2) manufactured ellipsometer; Rs = 22%) about increased to 2.5 times were high efficiency reflective polarizing element analysis. This device, Bridou et al. (2011) is proposed "that is coated with a thin film of the substrate MgF2 and SiO2 fused silica." As a result of the measurement, Rs = 54.5%, to achieve a Rp = 0.3%, high efficiency, of course, capable of taking out only about s-polarized light. Other reflective optical elements (the secondary mirror, the diffraction gratingcollector mirror), subjected to high-reflection coating of Al + MgF2 (reflectance of about 80%), less than 5% in the entire optical system by these (CCD Science was achieved a high throughput as a device for a vacuum ultraviolet ray of the entire system less than 5% (CCD of QE is not included).

Chromosphere, the transition layer of the sun is a region to switch to the magnetic pressure dominated from plasma pressure dominated, simultaneous observation of the detailed magnetic field measurement and plasma of dynamic phenomenon here is what is the frontier of the next solar physics. As This is a challenge that has just mentioned, even the next solar observation satellite plan SOLAR-C, in the experiments we had used a NASA sounding rocket for the first time in the SOLAR-C plan, will address the chromosphere-transition layer magnetic field measurement there. It is, is a Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) plan, the linear polarization of Lyman 􀉲 emission lines chromosphere-transition layer shoots (121.6nm) were detected in 0.1 percent of high accuracy, a new technique called Hanre effect I get the magnetic field information of chromosphere-transition layer. In Japan, the US and Europe joint observation in November 2012 as a rocket experiment is adopted to NASA this plan that full-scale start-up, start from assembly work is 2014 spring flight observation device, currently, it is where the alignment of the optical elements have been implemented. After this, it is planned to continue with the performance evaluation towards the observation implementation of summer 2015. In addition to once again explain the contents of the plan In this presentation, we report an overview of the entire development and preparation current status.

We are planning an international rocket experiment Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is (2015 planned) that Lyman alpha line (Ly alpha line) polarization spectroscopic observations from the sun. The purpose of this experiment, detected with high accuracy of the linear polarization of the Ly alpha lines to 0.1% by using a Hanle effect is to measure the magnetic field of the chromosphere-transition layer directly. For polarization photometric accuracy achieved that approximately 0.1% required for CLASP, it is necessary to realize the monitoring device with a high throughput. On the other hand, Ly alpha line (vacuum ultraviolet rays) have a sensitive characteristics that is absorbed by the material. We therefore set the optical system of the reflection system (transmission only the wavelength plate), each of the mirrors, subjected to high efficiency of the multilayer coating in accordance with the role. Primary mirror diameter of CLASP is about 30 cm, the amount of heat about 30,000 J is about 5 minutes of observation time is coming mainly in the visible light to the telescope. In addition, total flux of the sun visible light overwhelmingly large and about 200 000 times the Ly alpha line wavelength region. Therefore, in terms of thermal management and 0.1% of the photometric measurement accuracy achieved telescope, elimination of the visible light is essential. We therefore, has a high reflectivity (greater than 50%) in Ly alpha line, visible light is a multilayer coating be kept to a low reflectance (less than 5%) (cold mirror coating) was applied to the primary mirror. On the other hand, the efficiency of the polarization analyzer required chromospheric magnetic field measurement (the amount of light) Conventional (magnesium fluoride has long been known as a material for vacuum ultraviolet (MgF2) manufactured ellipsometer; Rs = 22%) about increased to 2.5 times were high efficiency reflective polarizing element analysis. This device, Bridou et al. (2011) is proposed "that is coated with a thin film of the substrate MgF2 and SiO2 fused silica." As a result of the measurement, Rs = 54.5%, to achieve a Rp = 0.3%, high efficiency, of course, capable of taking out only about spolarized light. Other reflective optical elements (the secondary mirror, the diffraction grating-collector mirror), subjected to high-reflection coating of Al + MgF2 (reflectance of about 80%), less than 5% in the entire optical system by these (CCD Science was achieved a high throughput as a device for a vacuum ultraviolet ray of the entire system less than 5% (CCD of QE is not included).

The Chromospheric Lyman-Alpha SpectroPolarimeter (CLASP) is a sounding-rocket experiment currently being built at the National Astronomical Observatory of Japan. This instrument aims to probe for the first time the magnetic field strength and orientation in the solar upper-chromosphere and lower-transition region. CLASP will measure the polarization of the Lyman-Alpha line (121.6nm) with an unprecedented accuracy, and derive the magnetic field information through the Hanle effect. Although polarization accuracy and spectral resolution are crucial for the Hanle effect detection, spatial resolution is also important to get reliable context image via the slit-jaw camera. As spatial resolution is directly related with the alignment of optics, it is also a good way of ensuring the alignment of the instrument to meet the scientific requirement. This poster will detail the experiments carried out to align CLASP's optics (telescope and spectrograph), as both part of the instrument were aligned separately. The telescope was aligned in double-pass mode, and a laser interferometer (He-Ne) was used to measure the telescope's wavefront error (WFE). The secondary mirror tilt and position were adjusted to remove comas and defocus aberrations from the WFE. Effect of gravity on the WFE measurement was estimated and the final WFE derived in zero-g condition for CLASP telescope will be presented. In addition, an estimation of the spot shape and size derived from the final WFE will also be shown. The spectrograph was aligned with a custom procedure: because Ly-light is absorbed by air, the spectrograph's off-axis parabolic mirrors were aligned in Visible Light (VL) using a custom-made VL grating instead of the flight Ly- grating. Results of the alignment in Visible Light will be shown and the spot shape recorded with CCDs at various position along the slit will be displayed. Results from both alignment experiment will be compared to the design requirement, and will be combined in order to estimate CLASP spatial resolution after its alignment in visible light.

The solar outer atmosphere is an extremely dynamic environment characterized by the continuous interplay between the plasma and the magnetic field that generates and permeates it. Such interactions play a fundamental role in hugely diverse astrophysical systems, but occur at scales that cannot be studied outside the solar system. Understanding this complex system requires concerted, simultaneous solar observations from the visible to the vacuum ultraviolet (VUV) and soft X-rays, at high spatial resolution (between 0.1′′ and 0.3′′), at high temporal resolution (on the order of 10 s, i.e., the time scale of chromospheric dynamics), with a wide temperature coverage (0.01 MK to 20 MK, from the chromosphere to the flaring corona), and the capability of measuring magnetic fields through spectropolarimetry at visible and near-infrared wavelengths. Simultaneous spectroscopic measurements sampling the entire temperature range are particularly important. These requirements are fulfilled by the Japanese Solar-C mission (Plan B), composed of a spacecraft in a geosynchronous orbit with a payload providing a significant improvement of imaging and spectropolarimetric capabilities in the UV, visible, and near-infrared with respect to what is available today and foreseen in the near future. The Large European Module for solar Ultraviolet Research (LEMUR), described in this paper, is a large VUV telescope feeding a scientific payload of high-resolution imaging spectrographs and cameras. LEMUR consists of two major components: a VUV solar telescope with a 30 cm diameter mirror and a focal length of 3.6 m, and a focal-plane package composed of VUV spectrometers covering six carefully chosen wavelength ranges between 170 Angstrom and 1270 Angstrom. The LEMUR slit covers 280′′ on the Sun with 0.14′′ per pixel sampling. In addition, LEMUR is capable of measuring mass flows velocities (line shifts) down to 2 km s − 1 or better. LEMUR has been proposed to ESA as the European contribution to the Solar C mission.