Search

Motivated by diverse secure requirements of multi-user in UAV systems, we propose a collaborative secret and covert transmission method for multi-antenna ground users to unmanned aerial vehicle (UAV) communications. Specifically, based on the power domain non-orthogonal multiple access (NOMA), two ground users with distinct security requirements, named Bob and Carlo, superimpose their signals and transmit the combined signal to the UAV named Alice. An adversary Willie attempts to simultaneously eavesdrop Bob's confidential message and detect whether Carlo is transmitting or not. We derive close-form expressions of the secrecy connection probability (SCP) and the covert connection probability (CCP) to evaluate the link reliability for wiretap and covert transmissions, respectively. Furthermore, we bound the secrecy outage probability (SOP) from Bob to Alice and the detection error probability (DEP) of Willie to evaluate the link security for wiretap and covert transmissions, respectively. To characterize the theoretical benchmark of the above model, we formulate a weighted multi-objective optimization problem to maximize the average of secret and covert transmission rates subject to constraints SOP, DEP, the beamformers of Bob and Carlo, and UAV trajectory parameters. To solve the optimization problem, we propose an iterative optimization algorithm using successive convex approximation and block coordinate descent (SCA-BCD) methods. Our results reveal the influence of design parameters of the system on the wiretap and covert rates, analytically and numerically. In summary, our study fills the gaps in joint secret and covert transmission for multi-user multi-antenna uplink UAV communications and provides insights to construct such systems.

We revisit the problem of statistical sequence matching between two databases of sequences initiated by Unnikrishnan (TIT 2015) and derive theoretical performance guarantees for the generalized likelihood ratio test (GLRT). We first consider the case where the number of matched pairs of sequences between the databases is known. In this case, the task is to accurately find the matched pairs of sequences among all possible matches between the sequences in the two databases. We analyze the performance of the GLRT by Unnikrishnan and explicitly characterize the tradeoff between the mismatch and false reject probabilities under each hypothesis in both large and small deviations regimes. Furthermore, we demonstrate the optimality of Unnikrishnan's GLRT test under the generalized Neyman-Person criterion for both regimes and illustrate our theoretical results via numerical examples. Subsequently, we generalize our achievability analyses to the case where the number of matched pairs is unknown, and an additional error probability needs to be considered. When one of the two databases contains a single sequence, the problem of statistical sequence matching specializes to the problem of multiple classification introduced by Gutman (TIT 1989). For this special case, our result for the small deviations regime strengthens previous result of Zhou, Tan and Motani (Information and Inference 2020) by removing unnecessary conditions on the generating distributions., Comment: Extended version of ISIT paper

With the development of social media, rumors have been spread broadly on social media platforms, causing great harm to society. Beside textual information, many rumors also use manipulated images or conceal textual information within images to deceive people and avoid being detected, making multimodal rumor detection be a critical problem. The majority of multimodal rumor detection methods mainly concentrate on extracting features of source claims and their corresponding images, while ignoring the comments of rumors and their propagation structures. These comments and structures imply the wisdom of crowds and are proved to be crucial to debunk rumors. Moreover, these methods usually only extract visual features in a basic manner, seldom consider tampering or textual information in images. Therefore, in this study, we propose a novel Vision and Graph Fused Attention Network (VGA) for rumor detection to utilize propagation structures among posts so as to obtain the crowd opinions and further explore visual tampering features, as well as the textual information hidden in images. We conduct extensive experiments on three datasets, demonstrating that VGA can effectively detect multimodal rumors and outperform state-of-the-art methods significantly.

LiDAR and cameras are complementary sensors for 3D object detection in autonomous driving. However, it is challenging to explore the unnatural interaction between point clouds and images, and the critical factor is how to conduct feature alignment of heterogeneous modalities. Currently, many methods achieve feature alignment by projection calibration only, without considering the problem of coordinate conversion accuracy errors between sensors, leading to sub-optimal performance. In this paper, we present GraphAlign, a more accurate feature alignment strategy for 3D object detection by graph matching. Specifically, we fuse image features from a semantic segmentation encoder in the image branch and point cloud features from a 3D Sparse CNN in the LiDAR branch. To save computation, we construct the nearest neighbor relationship by calculating Euclidean distance within the subspaces that are divided into the point cloud features. Through the projection calibration between the image and point cloud, we project the nearest neighbors of point cloud features onto the image features. Then by matching the nearest neighbors with a single point cloud to multiple images, we search for a more appropriate feature alignment. In addition, we provide a self-attention module to enhance the weights of significant relations to fine-tune the feature alignment between heterogeneous modalities. Extensive experiments on nuScenes benchmark demonstrate the effectiveness and efficiency of our GraphAlign.

We investigate the transport properties within a holographic model characterized by a novel gauge-axion coupling. A key innovation is the introduction of the direct coupling between axion fields, the antisymmetric tensor, and the gauge field in our bulk theory. This novel coupling term leads to the emergence of nondiagonal components in the conductivity tensor. An important characteristic is that the off-diagonal elements manifest antisymmetry. Remarkably, the conductivity behavior in this model akin to that of Hall conductivity. Additionally, this model can also achieve metal-insulator transition., Comment: 29 pages, 11 figures, Published version

We study the successive refinement setting of Shannon cipher system (SCS) under the maximal leakage secrecy metric for discrete memoryless sources under bounded distortion measures. Specifically, we generalize the threat model for the point-to-point rate-distortion setting of Issa, Wagner and Kamath (T-IT 2020) to the multiterminal successive refinement setting. Under mild conditions that correspond to partial secrecy, we characterize the asymptotically optimal normalized maximal leakage region for both the joint excess-distortion probability (JEP) and the expected distortion reliability constraints. Under JEP, in the achievability part, we propose a type-based coding scheme, analyze the reliability guarantee for JEP and bound the leakage of the information source through compressed messages. In the converse part, by analyzing a guessing scheme of the eavesdropper, we prove the optimality of our achievability result. Under expected distortion, the achievability part is established similarly to the JEP counterpart. The converse proof proceeds by generalizing the corresponding results for the rate-distortion setting of SCS by Schieler and Cuff (T-IT 2014) to the successive refinement setting. Somewhat surprisingly, the normalized maximal leakage regions under both JEP and expected distortion constraints are identical under certain conditions, although JEP appears to be a stronger reliability constraint.

The sixth generation (6G) wireless systems are envisioned to enable the paradigm shift from "connected things" to "connected intelligence", featured by ultra high density, large-scale, dynamic heterogeneity, diversified functional requirements and machine learning capabilities, which leads to a growing need for highly efficient intelligent algorithms. The classic optimization-based algorithms usually require highly precise mathematical model of data links and suffer from poor performance with high computational cost in realistic 6G applications. Based on domain knowledge (e.g., optimization models and theoretical tools), machine learning (ML) stands out as a promising and viable methodology for many complex large-scale optimization problems in 6G, due to its superior performance, generalizability, computational efficiency and robustness. In this paper, we systematically review the most representative "learning to optimize" techniques in diverse domains of 6G wireless networks by identifying the inherent feature of the underlying optimization problem and investigating the specifically designed ML frameworks from the perspective of optimization. In particular, we will cover algorithm unrolling, learning to branch-and-bound, graph neural network for structured optimization, deep reinforcement learning for stochastic optimization, end-to-end learning for semantic optimization, as well as federated learning for distributed optimization, for solving challenging large-scale optimization problems arising from various important wireless applications. Through the in-depth discussion, we shed light on the excellent performance of ML-based optimization algorithms with respect to the classical methods, and provide insightful guidance to develop advanced ML techniques in 6G networks.

Due to increasing demands of seamless connection and massive information exchange across the world, the integrated satellite-terrestrial communication systems develop rapidly. To shed lights on the design of this system, we consider an uplink communication model consisting of a single satellite, a single terrestrial station and multiple ground users. The terrestrial station uses decode-and-forward (DF) to facilitate the communication between ground users and the satellite. The channel between the satellite and the terrestrial station is assumed to be a quasi-static shadowed Rician fading channel, while the channels between the terrestrial station and ground users are assumed to experience independent quasi-static Rayleigh fading. We consider two cases of channel state information (CSI) availability. When instantaneous CSI is available, we derive the instantaneous achievable sum rate of all ground users and formulate an optimization problem to maximize the sum rate. When only channel distribution information (CDI) is available, we derive a closed-form expression for the outage probability and formulate another optimization problem to minimize the outage probability. Both optimization problems correspond to scheduling algorithms for ground users. For both cases, we propose low-complexity user scheduling algorithms and demonstrate the efficiency of our scheduling algorithms via numerical simulations., Comment: To appear in IEEE Transactions on Wireless Communications

We revisit $M$-ary classification of Gutman (TIT 1989), where one is tasked to determine whether a testing sequence is generated with the same distribution as one of the $M$ training sequences or not. Our main result is a two-phase test, its theoretical analysis and its optimality guarantee. Specifically, our two-phase test is a special case of a sequential test with only two decision time points: the first phase of our test is a fixed-length test with a reject option, the second-phase of our test proceeds only if a reject option is decided in the first phase and the second phase of our test does \emph{not} allow a reject option. To provide theoretical guarantee for our test, we derive achievable error exponents using the method of types and derive a converse result for the optimal sequential test using the techniques recently proposed by Hsu, Li and Wang (ITW, 2022) for binary classification. Analytically and numerically, we show that our two phase test achieves the performance of an optimal sequential test with proper choice of test parameters. In particular, similarly as the optimal sequential test, our test does not need a final reject option to achieve the optimal error exponent region while an optimal fixed-length test needs a reject option to achieve the same region. Finally, we specialize our results to binary classification when $M=2$ and to $M$-ary hypothesis testing when the ratio of the lengths of training sequences and testing sequences tends to infinity so that generating distributions can be estimated perfectly., Comment: submitted to IEEE Trans. Inf. Theory

The scientific outcomes of the 2022 Landslide4Sense (L4S) competition organized by the Institute of Advanced Research in Artificial Intelligence (IARAI) are presented here. The objective of the competition is to automatically detect landslides based on large-scale multiple sources of satellite imagery collected globally. The 2022 L4S aims to foster interdisciplinary research on recent developments in deep learning (DL) models for the semantic segmentation task using satellite imagery. In the past few years, DL-based models have achieved performance that meets expectations on image interpretation, due to the development of convolutional neural networks (CNNs). The main objective of this article is to present the details and the best-performing algorithms featured in this competition. The winning solutions are elaborated with state-of-the-art models like the Swin Transformer, SegFormer, and U-Net. Advanced machine learning techniques and strategies such as hard example mining, self-training, and mix-up data augmentation are also considered. Moreover, we describe the L4S benchmark data set in order to facilitate further comparisons, and report the results of the accuracy assessment online. The data is accessible on \textit{Future Development Leaderboard} for future evaluation at \url{https://www.iarai.ac.at/landslide4sense/challenge/}, and researchers are invited to submit more prediction results, evaluate the accuracy of their methods, compare them with those of other users, and, ideally, improve the landslide detection results reported in this article.

We study the mismatched successive refinement problem where one uses Gaussian codebooks to compress an arbitrary memoryless source with successive minimum Euclidean distance encoding under the quadratic distortion measure. Specifically, we derive achievable refined asymptotics under both the joint excess-distortion probability (JEP) and the separate excess-distortion probabilities (SEP) criteria. For both second-order and moderate deviations asymptotics, we consider two types of codebooks: the spherical codebook where each codeword is drawn independently and uniformly from the surface of a sphere and the i.i.d. Gaussian codebook where each component of each codeword is drawn independently from a Gaussian distribution. We establish the achievable second-order rate-region under JEP and we show that under SEP any memoryless source satisfying mild moment conditions is strongly successively refinable. When specialized to a Gaussian memoryless source (GMS), our results provide an alternative achievability proof with specific code design. We show that under JEP and SEP, the same moderate deviations constant is achievable. For large deviations asymptotics, we only consider the i.i.d. Gaussian codebook since the i.i.d. Gaussian codebook has better performance than the spherical codebook in this regime for the one layer mismatched rate-distortion problem (Zhou, Tan, Motani, TIT, 2019). We derive achievable exponents of both JEP and SEP and specialize our results to a GMS, which appears to be a novel result of independent interest.

Point cloud semantic segmentation has attracted attentions due to its robustness to light condition. This makes it an ideal semantic solution for autonomous driving. However, considering the large computation burden and bandwidth demanding of neural networks, putting all the computing into vehicle Electronic Control Unit (ECU) is not efficient or practical. In this paper, we proposed a light weighted point cloud semantic segmentation network based on range view. Due to its simple pre-processing and standard convolution, it is efficient when running on deep learning accelerator like DPU. Furthermore, a near sensor computing system is built for autonomous vehicles. In this system, a FPGA-based deep learning accelerator core (DPU) is placed next to the LiDAR sensor, to perform point cloud pre-processing and segmentation neural network. By leaving only the post-processing step to ECU, this solution heavily alleviate the computation burden of ECU and consequently shortens the decision making and vehicles reaction latency. Our semantic segmentation network achieved 10 frame per second (fps) on Xilinx DPU with computation efficiency 42.5 GOP/W., Comment: accepted by ISCAS 2022

Sparse code multiple access (SCMA) is an emerging paradigm for efficient enabling of massive connectivity in future machine-type communications (MTC). In this letter, we conceive the uplink transmissions of the low-density parity check (LDPC) coded SCMA system. Traditional receiver design of LDPC-SCMA system, which is based on message passing algorithm (MPA) for multiuser detection followed by individual LDPC decoding, may suffer from the drawback of the high complexity and large decoding latency, especially when the system has large codebook size and/or high overloading factor. To address this problem, we introduce a novel receiver design by applying the expectation propagation algorithm (EPA) to the joint detection and decoding (JDD) involving an aggregated factor graph of LDPC code and sparse codebooks. Our numerical results demonstrate the superiority of the proposed EPA based JDD receiver over the conventional Turbo receiver in terms of both significantly lower complexity and faster convergence rate without noticeable error rate performance degradation.

Projecting the point cloud on the 2D spherical range image transforms the LiDAR semantic segmentation to a 2D segmentation task on the range image. However, the LiDAR range image is still naturally different from the regular 2D RGB image; for example, each position on the range image encodes the unique geometry information. In this paper, we propose a new projection-based LiDAR semantic segmentation pipeline that consists of a novel network structure and an efficient post-processing step. In our network structure, we design a FID (fully interpolation decoding) module that directly upsamples the multi-resolution feature maps using bilinear interpolation. Inspired by the 3D distance interpolation used in PointNet++, we argue this FID module is a 2D version distance interpolation on $(\theta, \phi)$ space. As a parameter-free decoding module, the FID largely reduces the model complexity by maintaining good performance. Besides the network structure, we empirically find that our model predictions have clear boundaries between different semantic classes. This makes us rethink whether the widely used K-nearest-neighbor post-processing is still necessary for our pipeline. Then, we realize the many-to-one mapping causes the blurring effect that some points are mapped into the same pixel and share the same label. Therefore, we propose to process those occluded points by assigning the nearest predicted label to them. This NLA (nearest label assignment) post-processing step shows a better performance than KNN with faster inference speed in the ablation study. On the SemanticKITTI dataset, our pipeline achieves the best performance among all projection-based methods with $64 \times 2048$ resolution and all point-wise solutions. With a ResNet-34 as the backbone, both the training and testing of our model can be finished on a single RTX 2080 Ti with 11G memory. The code is released., Comment: Accepted by IROS'21, code link: https://github.com/placeforyiming/IROS21-FIDNet-SemanticKITTI

Light Detection And Ranging (LiDAR) has been widely used in autonomous vehicles for perception and localization. However, the cost of a high-resolution LiDAR is still prohibitively expensive, while its low-resolution counterpart is much more affordable. Therefore, using low-resolution LiDAR for autonomous driving is an economically viable solution, but the point cloud sparsity makes it extremely challenging. In this paper, we propose a two-stage neural network framework that enables 3D object detection using a low-resolution LiDAR. Taking input from a low-resolution LiDAR point cloud and a monocular camera image, a depth completion network is employed to produce dense point cloud that is subsequently processed by a voxel-based network for 3D object detection. Evaluated with KITTI dataset for 3D object detection in Bird-Eye View (BEV), the experimental result shows that the proposed approach performs significantly better than directly applying the 16-line LiDAR point cloud for object detection. For both easy and moderate cases, our 3D vehicle detection results are close to those using 64-line high-resolution LiDARs.

LiDAR depth completion is a task that predicts depth values for every pixel on the corresponding camera frame, although only sparse LiDAR points are available. Most of the existing state-of-the-art solutions are based on deep neural networks, which need a large amount of data and heavy computations for training the models. In this letter, a novel non-learning depth completion method is proposed by exploiting the local surface geometry that is enhanced by an outlier removal algorithm. The proposed surface geometry model is inspired by the observation that most pixels with unknown depth have a nearby LiDAR point. Therefore, it is assumed those pixels share the same surface with the nearest LiDAR point, and their respective depth can be estimated as the nearest LiDAR depth value plus a residual error. The residual error is calculated by using a derived equation with several physical parameters as input, including the known camera intrinsic parameters, estimated normal vector, and offset distance on the image plane. The proposed method is further enhanced by an outlier removal algorithm that is designed to remove incorrectly mapped LiDAR points from occluded regions. On KITTI dataset, the proposed solution achieves the best error performance among all existing non-learning methods and is comparable to the best self-supervised learning method and some supervised learning methods. Moreover, since outlier points from occluded regions is a commonly existing problem, the proposed outlier removal algorithm is a general preprocessing step that is applicable to many robotic systems with both camera and LiDAR sensors., Comment: IEEE Robotics and Automation Letters (2021). Code link: https://github.com/placeforyiming/RAL_Non-Learning_DepthCompletion

We study the problem of simultaneous search for multiple targets over a multidimensional unit cube and derive fundamental resolution limits of non-adaptive querying procedures using the 20 questions estimation framework. The performance criterion that we consider is the achievable resolution, which is defined as the maximal $L_\infty$ norm between the location vector and its estimated version where the maximization is over all target location vectors. The fundamental resolution limit is defined as the minimal achievable resolution of any non-adaptive query procedure, where each query has binary yes/no answers. We drive non-asymptotic and second-order asymptotic bounds on the minimal achievable resolution, using tools from finite blocklength information theory. Specifically, in the achievability part, we relate the 20 questions problem to data transmission over a multiple access channel, use the information spectrum method by Han and borrow results from finite blocklength analysis for random access channel coding. In the converse part, we relate the 20 questions problem to data transmission over a point-to-point channel and adapt finite blocklength converse results for channel coding. Our results extend the purely first-order asymptotic analyses of Kaspi \emph{et al.} (ISIT 2015) for the one-dimensional case: we consider channels beyond the binary symmetric channel and derive non-asymptotic and second-order asymptotic bounds on the performance of optimal non-adaptive query procedures., Comment: To appear in IEEE Transactions on Information Theory. Copyright (c) 2017 IEEE. Personal use of this material is permitted. However, permission to use this material for any other purposes must be obtained from the IEEE by sending a request to pubs-permissions@ieee.org

In this paper, we propose a novel visible light communication (VLC) assisted Perspective-fourLine algorithm (V-P4L) for practical indoor localization. The basic idea of V-P4L is to joint VLC and computer vision to achieve high accuracy regardless of LED height differences. In particular, we first exploit the space-domain information to estimate the orientation and coordinate of a single rectangular LED luminaire in the camera coordinate system based on the plane and solid geometry. Then, based on the time-domain information transmitted by VLC and the estimated luminaire information, V-P4L can estimate the position and pose of the camera by the single-view geometry theory and the linear least square (LLS) method. To further mitigate the effect of height differences among LEDs on localization accuracy, we then propose a correction algorithm of V-P4L based on the LLS method and a simple optimization method. Due to the combination of time- and space-domain information, V-P4L only requires a single luminaire for localization without limitation on the correspondences between the features and their projections. Simulation results show that for V-P4L the position error is always less than 15 cm and the orientation error is always less than 3{\deg} using popular indoor luminaires.

Autonomous vehicles rely heavily on sensors such as camera and LiDAR, which provide real-time information about their surroundings for the tasks of perception, planning and control. Typically a LiDAR can only provide sparse point cloud owing to a limited number of scanning lines. By employing depth completion, a dense depth map can be generated by assigning each camera pixel a corresponding depth value. However, the existing depth completion convolutional neural networks are very complex that requires high-end GPUs for processing, and thus they are not applicable to real-time autonomous driving. In this paper, a light-weight network is proposed for the task of LiDAR point cloud depth completion. With an astonishing 96.2% reduction in the number of parameters, it still achieves comparable performance (9.3% better in MAE but 3.9% worse in RMSE) to the state-of-the-art network. For real-time embedded platforms, depthwise separable technique is applied to both convolution and deconvolution operations and the number of parameters decreases further by a factor of 7.3, with only a small percentage increase in RMSE and MAE performance. Moreover, a system-on-chip architecture for depth completion is developed on a PYNQ-based FPGA platform that achieves real-time processing for HDL-64E LiDAR at the speed 11.1 frame per second.

In recent years, convolutional neural network has gained popularity in many engineering applications especially for computer vision. In order to achieve better performance, often more complex structures and advanced operations are incorporated into the neural networks, which results very long inference time. For time-critical tasks such as autonomous driving and virtual reality, real-time processing is fundamental. In order to reach real-time process speed, a light-weight, high-throughput CNN architecture namely RoadNet-RT is proposed for road segmentation in this paper. It achieves 90.33% MaxF score on test set of KITTI road segmentation task and 8 ms per frame when running on GTX 1080 GPU. Comparing to the state-of-the-art network, RoadNet-RT speeds up the inference time by a factor of 20 at the cost of only 6.2% accuracy loss. For hardware design optimization, several techniques such as depthwise separable convolution and non-uniformed kernel size convolution are customized designed to further reduce the processing time. The proposed CNN architecture has been successfully implemented on an FPGA ZCU102 MPSoC platform that achieves the computation capability of 83.05 GOPS. The system throughput reaches 327.9 frames per second with image size 1216x176.

LiDAR sensors have been widely used in many autonomous vehicle modalities, such as perception, mapping, and localization. This paper presents an FPGA-based deep learning platform for real-time point cloud processing targeted on autonomous vehicles. The software driver for the Velodyne LiDAR sensor is modified and moved into the on-chip processor system, while the programmable logic is designed as a customized hardware accelerator. As the state-of-art deep learning algorithm for point cloud processing, PointNet is successfully implemented on the proposed FPGA platform. Targeted on a Xilinx Zynq UltraScale+ MPSoC ZCU104 development board, the FPGA implementations of PointNet achieve the computing performance of 182.1 GOPS and 280.0 GOPS for classification and segmentation respectively. The proposed design can support an input up to 4096 points per frame. The processing time is 19.8 ms for classification and 34.6 ms for segmentation, which meets the real-time requirement for most of the existing LiDAR sensors., Comment: This paper has been accepted by ISCAS 2020

In this paper, a scalable neural network hardware architecture for image segmentation is proposed. By sharing the same computing resources, both convolution and deconvolution operations are handled by the same process element array. In addition, access to on-chip and off-chip memories is optimized to alleviate the burden introduced by partial sum. As an example, SegNet-Basic has been implemented using the proposed unified architecture by targeting on Xilinx ZC706 FPGA, which achieves the performance of 151.5 GOPS and 94.3 GOPS for convolution and deconvolution respectively. This unified convolution/deconvolution design is applicable to other CNNs with deconvolution., Comment: This paper has been accepted by ISCAS 2020

In this paper, a received signal strength assisted Perspective-three-Point positioning algorithm (R-P3P) is proposed for visible light positioning (VLP) systems. The basic idea of R-P3P is to joint visual and strength information to estimate the receiver position using 3 LEDs regardless of the LEDs' orientations. R-P3P first utilizes visual information captured by the camera to estimate the incidence angles of visible lights. Then, R-P3P calculates the candidate distances between the LEDs and the receiver based on the law of cosines and the Wu-Ritt's zero decomposition method. Based on the incidence angles, the candidate distances and the physical characteristics of the LEDs, R-P3P can select the exact distances from all the candidate distances. Finally, the linear least square (LLS) method is employed to estimate the position of the receiver. Due to the combination of visual and strength information of visible light signals, R-P3P can achieve high accuracy using 3 LEDs regardless of the LEDs' orientations. Simulation results show that R-P3P can achieve positioning accuracy within 10 cm over 70% indoor area with low complexity regardless of LEDs orientations., Comment: arXiv admin note: substantial text overlap with arXiv:2004.06294

The existing phase shifter models adopted for reconfigurable intelligent surfaces (RISs) have ignored the electromagnetic (EM) waves propagation behavior, thus cannot reveal practical effects of RIS on wireless communication systems. Based on the equivalent circuit, this paper introduces an angle-dependent phase shifter model for varactor-based RISs. To the best of our knowledge, this is the first phase shifter model which reveals that the incident angle of EM waves has influence on the reflection coefficient of RIS. In addition, the angle-reciprocity on RIS is investigated and further proved to be tenable when the reflection phase difference of adjacent RIS unit cells is invariant for an impinging EM wave and its reverse incident one. The angle-dependent characteristic of RIS is verified through full-wave simulation. According to our analysis and the simulation results, we find that the angle-reciprocity of varactor-based RIS only holds under small incident angles of both forward and reverse incident EM waves, thus limits the channel reciprocity in RIS-assisted TDD systems., Comment: Accepted by IEEE Communications Letters

In this paper, a high coverage algorithm termed enhanced camera assisted received signal strength ratio (eCA-RSSR) positioning algorithm is proposed for visible light positioning (VLP) systems. The basic idea of eCA-RSSR is to utilize visual information captured by the camera to estimate the incidence angles of visible lights first. Based on the incidence angles, eCA-RSSR utilizes the received signal strength ratio (RSSR) calculated by the photodiode (PD) to estimate the ratios of the distances between the LEDs and the receiver. Based on an Euclidean plane geometry theorem, eCA-RSSR transforms the ratios of the distances into the absolute values. In this way, eCA-RSSR only requires 3 LEDs for both orientation-free 2D and 3D positioning, implying that eCA-RSSR can achieve high coverage. Based on the absolute values of the distances, the linear least square method is employed to estimate the position of the receiver. Therefore, for the receiver having a small distance between the PD and the camera, the accuracy of eCA-RSSR does not depend on the starting values of the non-linear least square method and the complexity of eCA-RSSR is low. Furthermore, since the distance between the PD and camera can significantly affect the performance of eCA-RSSR, we further propose a compensation algorithm for eCA-RSSR based on the single-view geometry. Simulation results show that eCA-RSSR can achieve centimeter-level accuracy over 80% indoor area for both the receivers having a small and a large distance between the PD and the camera.

Recent progress in the automated driving system (ADS) and advanced driver assistant system (ADAS) has shown that the combined use of 3D light detection and ranging (LiDAR) and the camera is essential for an intelligent vehicle to perceive and understand its surroundings. LiDAR-camera fusion requires precise intrinsic and extrinsic calibrations between the sensors. However, due to the limitation of the calibration equipment and susceptibility to noise, algorithms in existing methods tend to fail in finding LiDAR-camera correspondences in long-range. In this paper, we introduced an interactive LiDAR to camera calibration toolbox to estimate the intrinsic and extrinsic transforms. This toolbox automatically detects the corner of a planer board from a sequence of LiDAR frames and provides a convenient user interface for annotating the corresponding pixels on camera frames. Since the toolbox only detects the top corner of the board, there is no need to prepare a precise polygon planar board or a checkerboard with different reflectivity areas as in the existing methods. Furthermore, the toolbox uses genetic algorithms to estimate the transforms and supports multiple camera models such as the pinhole camera model and the fisheye camera model. Experiments using Velodyne VLP-16 LiDAR and Point Grey Chameleon 3 camera show robust results., Comment: Submitted to IV 2019

Convolutional neural networks (CNNs) have been widely deployed in the fields of computer vision and pattern recognition because of their high accuracy. However, large convolution operations are computing-intensive that often requires a powerful computing platform such as Graphics Processing Unit (GPU). This makes it difficult to apply CNNs to portable devices. The state-of-the-art CNNs, such as MobileNetV2 and Xception, adopt depthwise separable convolution to replace the standard convolution for embedded platforms. That significantly reduces operations and parameters with only limited loss in accuracy. This highly structured model is very suitable for Field-Programmable Gate Array (FPGA) implementation. In this paper, a scalable high performance depthwise separable convolution optimized CNN accelerator is proposed. The accelerator can be fit into an FPGA of different sizes, provided the balancing between hardware resources and processing speed. As an example, MobileNetV2 is implemented on Arria 10 SoC FPGA, and the results show this accelerator can classify each picture from ImageNet in 3.75ms, which is about 266.6 frames per second. This achieves 20x speedup if compared to CPU., Comment: Accepted by IEEE Transaction on Circuits and Systems II: Express Briefs, Volume 65, Issue 10, Oct 2018

In automated driving systems (ADS) and advanced driver-assistance systems (ADAS), an efficient road segmentation is necessary to perceive the drivable region and build an occupancy map for path planning. The existing algorithms implement gigantic convolutional neural networks (CNNs) that are computationally expensive and time consuming. In this paper, we introduced distributed LSTM, a neural network widely used in audio and video processing, to process rows and columns in images and feature maps. We then propose a new network combining the convolutional and distributed LSTM layers to solve the road segmentation problem. In the end, the network is trained and tested in KITTI road benchmark. The result shows that the combined structure enhances the feature extraction and processing but takes less processing time than pure CNN structure., Comment: 6 pages. arXiv admin note: text overlap with arXiv:1804.05164

This paper presents a field-programmable gate array (FPGA) design of a segmentation algorithm based on convolutional neural network (CNN) that can process light detection and ranging (LiDAR) data in real-time. For autonomous vehicles, drivable region segmentation is an essential step that sets up the static constraints for planning tasks. Traditional drivable region segmentation algorithms are mostly developed on camera data, so their performance is susceptible to the light conditions and the qualities of road markings. LiDAR sensors can obtain the 3D geometry information of the vehicle surroundings with high precision. However, it is a computational challenge to process a large amount of LiDAR data in real-time. In this paper, a convolutional neural network model is proposed and trained to perform semantic segmentation using data from the LiDAR sensor. An efficient hardware architecture is proposed and implemented on an FPGA that can process each LiDAR scan in 17.59 ms, which is much faster than the previous works. Evaluated using Ford and KITTI road detection benchmarks, the proposed solution achieves both high accuracy in performance and real-time processing in speed., Comment: 11 pages. IEEE Transactions on Circuits and Systems I: Regular Papers (2018)

In recent years, it has been found that neural networks can be easily fooled by adversarial examples, which is a potential safety hazard in some safety-critical applications. Many researchers have proposed various method to make neural networks more robust to white-box adversarial attacks, but an effective method have not been found so far. In this short paper, we focus on the robustness of the features learned by neural networks. We show that the features learned by neural networks are not robust, and find that the robustness of the learned features is closely related to the resistance against adversarial examples of neural networks. We also find that adversarial training against fast gradients sign method (FGSM) does not make the leaned features very robust, even if it can make the trained networks very resistant to FGSM attack. Then we propose a method, which can be seen as an extension of adversarial training, to train neural networks to learn more robust features. We perform experiments on MNIST and CIFAR-10 to evaluate our method, and the experiment results show that this method greatly improves the robustness of the learned features and the resistance to adversarial attacks.

This paper presents the FPGA design of a convolutional neural network (CNN) based road segmentation algorithm for real-time processing of LiDAR data. For autonomous vehicles, it is important to perform road segmentation and obstacle detection such that the drivable region can be identified for path planning. Traditional road segmentation algorithms are mainly based on image data from cameras, which is subjected to the light condition as well as the quality of road markings. LiDAR sensor can obtain the 3D geometry information of the vehicle surroundings with very high accuracy. However, it is a computational challenge to process a large amount of LiDAR data at real-time. In this work, a convolutional neural network model is proposed and trained to perform semantic segmentation using the LiDAR sensor data. Furthermore, an efficient hardware design is implemented on the FPGA that can process each LiDAR scan in 16.9ms, which is much faster than the previous works. Evaluated using KITTI road benchmarks, the proposed solution achieves high accuracy of road segmentation., Comment: Under review at ISCAS 2018

While full-duplex (FD) transmission has the potential to double the system capacity, its substantial benefit can be offset by the self-interference (SI) and non-ideality of practical transceivers. In this paper, we investigate the achievable sum rates (ASRs) of half-duplex (HD) and FD transmissions with orthogonal frequency division multiplexing (OFDM), where the non-ideality is taken into consideration. Four transmission strategies are considered, namely HD with uniform power allocation (UPA), HD with non-UPA (NUPA), FD with UPA, and FD with NUPA. For each of the four transmission strategies, an optimization problem is formulated to maximize its ASR, and a (suboptimal/optimal) solution with low complexity is accordingly derived. Performance evaluations and comparisons are conducted for three typical channels, namely symmetric frequency-flat/selective and asymmetric frequency-selective channels. Results show that the proposed solutions for both HD and FD transmissions can achieve near optimal performances. For FD transmissions, the optimal solution can be obtained under typical conditions. In addition, several observations are made on the ASR performances of HD and FD transmissions., Comment: To appear in IEEE TVT. This paper solves the problem of sum achievable rate optimization of bidirectional FD OFDM link, where joint time and power allocation is involved

In millimeter-wave communications (MMWC), in order to compensate for high propagation attenuation, phased arrays are favored to achieve array gain by beamforming, where transmitting and receiving antenna arrays need to be jointly trained to obtain appropriate antenna weight vectors (AWVs). Since the amplitude of each element of the AWV is usually constraint constant to simplify the design of phased arrays in MMWC, the existing singular vector based beamforming training scheme cannot be used for such devices. Thus, in this letter, a steering vector based iterative beamforming training scheme, which exploits the directional feature of MMWC channels, is proposed for devices with constant-amplitude phased arrays. Performance evaluations show that the proposed scheme achieves a fast convergence rate as well as a near optimal array gain., Comment: 4 pages

This is a review of a set of recent papers with some new data added. After a brief biological introduction a visualization scheme of the string composition of long DNA sequences, in particular, of bacterial complete genomes, will be described. This scheme leads to a class of self-similar and self-overlapping fractals in the limit of infinitely long constotuent strings. The calculation of their exact dimensions and the counting of true and redundant avoided strings at different string lengths turn out to be one and the same problem. We give exact solution of the problem using two independent methods: the Goulden-Jackson cluster method in combinatorics and the method of formal language theory., Comment: 24 pages, LaTeX, 5 PostScript figures (two in color), psfig

A representation of frequency of strings of length K in complete genomes of many organisms in a square has led to seemingly self-similar patterns when K increases. These patterns are caused by under-represented strings with a certain "tag"-string and they define some fractals when K tends to infinite. The Box and Hausdorff dimensions of the limit set are discussed. Although the method proposed by Mauldin and Williams to calculate Box and Hausdorff dimension is valid in our case, a different and simpler method is proposed in this paper., Comment: 9 pages with two figures

Symbolic dynamics is a coarse-grained description of dynamics. By taking into account the ``geometry'' of the dynamics, it can be cast into a powerful tool for practitioners in nonlinear science. Detailed symbolic dynamics can be developed not only for one-dimensional mappings, unimodal as well as those with multiple critical points and discontinuities, but also for some two-dimensional mappings. The latter paves the way for symbolic dynamics study of ordinary differential equations via the Poincar\'e maps. This paper provides an overview of the recent development of the applied aspects of symbolic dynamics., Comment: 6 pages, LaTeX, no figures. Accepted by Chinese Journal of Physics (Taipei)

Recent progress of symbolic dynamics of one- and especially two-dimensional maps has enabled us to construct symbolic dynamics for systems of ordinary differential equations (ODEs). Numerical study under the guidance of symbolic dynamics is capable to yield global results on chaotic and periodic regimes in systems of dissipative ODEs which cannot be obtained neither by purely analytical means nor by numerical work alone. By constructing symbolic dynamics of 1D and 2D maps from the Poincare sections all unstable periodic orbits up to a given length at a fixed parameter set may be located and all stable periodic orbits up to a given length may be found in a wide parameter range. This knowledge, in turn, tells much about the nature of the chaotic limits. Applied to the Lorenz equations, this approach has led to a nomenclature, i.e., absolute periods and symbolic names, of stable and unstable periodic orbits for an autonomous system. Symmetry breakings and restorations as well as coexistence of different regimes are also analyzed by using symbolic dynamics., Comment: 35 pages, LaTeX, 13 Postscript figures, uses psfig.tex. The revision concerns a bug at the end of hlzfig12.ps which prevented the printing of the whole .ps file from page 24