Search

Explored in this study are the physical effects of the numerical treatment of the aft geometry on the vortex behavior and force production due to a tangential jet on a body at a high angle of attack. The study is conducted numerically by solving the three-dimensional, compressible-flow, Reynolds-averaged Navier-Stokes equations. Two tangent-ogive cylinder configurations are used. The first configuration locates the computational exit plane at the end of the body, while the second caps the end of the body with a hemisphere and locates the exit plane far downstream. In both configurations, a blowing slot is located at the cylinder-ogive junction. Comparisons are made between results for the two configurations for cases with and without the jet present. Results indicate that inclusion of the wake of the body in the computations, while altering the flow in small details, does not change the character of the flow. The vortex behavior remains unaltered and the force distribution, while changing to some degree in magnitude, does not change in shape.

This work explores the mechanisms by which tangential slot blowing creates forces on a body at a high angle of attack. The study is conducted numerically by solving the three-dimensional, compressible-flow Navier-Stokes equations. A tangent-ogive cylinder configuration is used with the blowing slot located both on the nose and on the cylindrical part of the body. The angle of attack used is 30 deg., the Mach no. is 0.2 and the Reynolds no., based on diameter, is 52,000. Several conclusions were made concerning the physical mechanisms by which the jet interacts with the ambient flowfield to produce a side force: (1) A centrifugal force component is created at the wall due to the momentum of the jet being forced to follow the curvature of the surface. (2) A large amount of vorticity is added to the flowfield by the jet. In the region of the slot, the vorticity has the effect of inducing circulation around the body. Downstream of the slot, the vorticity alters the strength of the nose vortices. (3) The position of the nose vortices can be altered to the jet changing the location of separation. And (4), the jet has the ability to excite unstable behavior producing a global change in the character of the flow.

This work explores the effect of tangential blowing on the vortical structures that develop around a tangent-ogive cylinder configuration at high angle of attack. A lateral force results if blowing is applied asymmetrically. The study is conducted numerically by solving the three-dimensional, compressible-flow Navier-Stokes equations. The computation was done for a Reynolds number of 52,000, Mach number of 0.2, blowing momentum coefficients of 0.0, 0.1, 0.2, and 0.4, and angle of attack of 10, 30, and 45 deg. Only asymmetrical blowing was considered. Surface streamlines, helicity contours and pressure distributions are obtained for each case.

The effects of tangential jet blowing on the vortical structures developing about the fuselage of a missile or aircraft at high angle of attack are investigated numerically and experimentally. Computations are carried out for fully laminar and fully turbulent flows, and the results are compared with flow visualization data. It is shown that turbulent computations are more accurate in describing the flow behavior. The actuator plane method is shown to be sufficiently accurate in modeling the essential flow physics of a tangential jet.