Search

A prototype Liquid-argon Trigger Digitizer Board (LTDB), called the LTDB Demonstrator, has been developed to demonstrate the functions of the ATLAS Liquid Argon Calorimeter Phase-I trigger electronics upgrade. Forty Analog-to-Digital converters and four FPGAs with embedded multi-gigabit-transceivers on each Demonstrator need high quality clocks. A clock distribution system based on commercial components has been developed for the Demonstrator. The design of the clock distribution system is presented. The performance of the clock distribution system has been evaluated. The components used in the clock distribution system have been qualified to meet radiation tolerance requirements of the Demonstrator., Comment: 7 pages, 4 figures, Proceedings of the Topical Workshop on Electronics for Particle Physics 2014

A compact radiation-tolerant array optical transmitter module (ATx) is developed to provide data transmission up to 10Gbps per channel with 12 parallel channels for collider detector applications. The ATx integrates a Vertical Cavity Surface-Emitting Laser (VCSEL) array and driver circuitry for electrical to optical conversion, an edge warp substrate for the electrical interface and a micro-lens array for the optical interface. This paper reports the continuing development of the ATx custom package. A simple, high-accuracy and reliable active-alignment method for the optical coupling is introduced. The radiation-resistance of the optoelectronic components is evaluated and the inclusion of a custom-designed array driver is discussed., Comment: 8 pages, 8 figures

In this paper, a remote FPGA-configuration method based on JTAG extension over optical fibers is presented. The method takes advantage of commercial components and ready-to-use software such as iMPACT and does not require any hardware or software development. The method combines the advantages of the slow remote JTAG configuration and the fast local flash memory configuration. The method has been verified successfully and used in the Demonstrator of Liquid-Argon Trigger Digitization Board (LTDB) for the ATLAS liquid argon calorimeter Phase-I trigger upgrade. All components on the FPGA side are verified to meet the radiation tolerance requirements., Comment: 8 pages, 4 figures

We present the design and test results of the Miniature optical Transmitter (MTx) and Transceiver (MTRx) for the high luminosity LHC (HL-LHC) experiments. MTx and MTRx are Transmitter Optical Subassembly (TOSA) and Receiver Optical Subassembly (ROSA) based. There are two major developments: the Vertical Cavity Surface Emitting Laser (VCSEL) driver ASIC LOCld and the mechanical latch that provides the connection to fibers. In this paper, we concentrate on the justification of this work, the design of the latch and the test results of these two modules with a Commercial Off-The-Shelf (COTS) VCSEL driver., Comment: 5 pages, 7 figures

We demonstrate terahertz time-domain spectroscopy (THz-TDS) to be an accurate, rapid and scalable method to probe the interaction-induced Fermi velocity renormalization {\nu}F^* of charge carriers in graphene. This allows the quantitative extraction of all electrical parameters (DC conductivity {\sigma}DC, carrier density n, and carrier mobility {\mu}) of large-scale graphene films placed on arbitrary substrates via THz-TDS. Particularly relevant are substrates with low relative permittivity (< 5) such as polymeric films, where notable renormalization effects are observed even at relatively large carrier densities (> 10^12 cm-2, Fermi level > 0.1 eV). From an application point of view, the ability to rapidly and non-destructively quantify and map the electrical ({\sigma}DC, n, {\mu}) and electronic ({\nu}F^* ) properties of large-scale graphene on generic substrates is key to utilize this material in applications such as metrology, flexible electronics as well as to monitor graphene transfers using polymers as handling layers., Comment: 23 pages, 8 figures