Search

This work proposes an effective thermal activation method with low technical effort for industrially produced titanium-iron-manganese powders (TiFeMn) for hydrogen storage. In this context, the influence of temperature and particle size of TiFeMn on the activation process is systematically studied. The results obtained from this investigation suggest that the activation of the TiFeMn material at temperatures as low as 50 {\deg}C is already possible and that an increase to 90 {\deg}C strongly reduces the incubation time for activation, i.e. the incubation time of the 90 {\deg}C/90 {\deg}C sample is about 0.84 h while ~ 277 h is required for the 50 {\deg}C/50 {\deg}C sample. Selecting TiFeMn particles of larger size also leads to significant improvements in the activation performance of the investigated material. The proposed activation routine makes it possible to overcome the oxide layer existing on the compound surface, which acts as a diffusion barrier for the hydrogen atoms. This activation method induces further cracks and defects in the powder granules, generating new surfaces for hydrogen absorption with greater frequency, and thus leading to faster sorption kinetics in the subsequent absorption-desorption cycles., Comment: This is an accepted manuscript submitted the Journal of Alloys and Compounds in April 2022. The main part has 25 pages, 12 figures, and 2 tables; Supplementary Information has 7 pages, 5 figures, and 1 table

This work aims at investigating the effect that the energy transferred during powder-to-wall collisions in a milling process without grinding media entails on solid-gas reactions. For this purpose, the synthesis of Mg(BH$_4$)$_2$ from MgB$_2$ in a pressurized hydrogen atmosphere was chosen as a model reaction. MgB$_2$ was milled under a broad set of milling parameters (i.e. milling times and rotation regimes) and the obtained product thoroughly characterized. By proving the partial formation of Mg(BH$_4$)$_2$, the results of this investigation indicate that the energy transferred to the powder bed by the powder particles colliding with the chamber wall during milling is not negligible, in particular when the milling process is protracted for a long period.

We report on the hydrogen sorption investigation of the mixed alkali cluster intercalated fulleride series NaxLi6-xC60. These compounds are isostructural to Na6C60 and Li6C60 while the cubic lattice parameter is linearly dependent on x. The H2 absorption/desorption was studied by means of charge/discharge kinetic and coupled calorimetric - manometric measurements. By varying the stoichiometry, we found the best compromise between absorption rate, temperature and amount of hydrogen in Na1Li5C60. This system is able to reversibly absorb up to 4.3 wt% H2 at 280 {\deg}C, which is 70 {\deg}C lower in temperature than its parent compound Li6C60. Furthermore, the kinetics is improved of 67% with respect Li6C60 and the dehydrogenation enthalpy is 13 kJ/mol H2 lower., Comment: 10 pages, 6 figures