Search

The pulp and paper industry is critical to global industrial and economic development. Recently, India's pulp and paper industries have been facing severe competitive challenges. The challenges have impaired the environmental performance and resulted in the closure of several operations. Assessment and prediction of the performance of the Indian pulp and paper industry using various parameters is a critical task for researchers. This study proposes a framework for performance assessment and prediction based on Data Envelopment Analysis (DEA), Artificial Neural Networks, and Deep Learning (DL) to assist industry administration and decision-making. We presented a case study based on eight industries to demonstrate the methodology's applicability. This study analyses and predicts industry performance based on sample data observations over 30 years. The result suggests the DEA-DL-based efficiency prediction has an overall MSE of 0.08 compared with the actual efficiency. Furthermore, the efficiency rankings are compared between the three techniques. The results suggest that the integrated DEA-DL method is primarily accurate in most scenarios with the actual values. The findings of this study provide a comprehensive analysis of environmental performance for policymakers. [ABSTRACT FROM AUTHOR]

Background: In low-middle income countries, healthcare providers primarily use paper health records for capturing data. Paper health records are utilized predominately due to the prohibitive cost of acquisition and maintenance of automated data capture devices and electronic medical records. Data recorded on paper health records is not easily accessible in a digital format to healthcare providers. The lack of real time accessible digital data limits healthcare providers, researchers, and quality improvement champions to leverage data to improve patient outcomes. In this project, we demonstrate the novel use of computer vision software to digitize handwritten intraoperative data elements from smartphone photographs of paper anesthesia charts from the University Teaching Hospital of Kigali. We specifically report our approach to digitize checkbox data, symbol-denoted systolic and diastolic blood pressure, and physiological data. Methods: We implemented approaches for removing perspective distortions from smartphone photographs, removing shadows, and improving image readability through morphological operations. YOLOv8 models were used to deconstruct the anesthesia paper chart into specific data sections. Handwritten blood pressure symbols and physiological data were identified, and values were assigned using deep neural networks. Our work builds upon the contributions of previous research by improving upon their methods, updating the deep learning models to newer architectures, as well as consolidating them into a single piece of software. Results: The model for extracting the sections of the anesthesia paper chart achieved an average box precision of 0.99, an average box recall of 0.99, and an mAP0.5-95 of 0.97. Our software digitizes checkbox data with greater than 99% accuracy and digitizes blood pressure data with a mean average error of 1.0 and 1.36 mmHg for systolic and diastolic blood pressure respectively. Overall accuracy for physiological data which includes oxygen saturation, inspired oxygen concentration and end tidal carbon dioxide concentration was 85.2%. Conclusions: We demonstrate that under normal photography conditions we can digitize checkbox, blood pressure and physiological data to within human accuracy when provided legible handwriting. Our contributions provide improved access to digital data to healthcare practitioners in low-middle income countries. [ABSTRACT FROM AUTHOR]

Avoiding financial losses requires preventing catastrophic oil‐filled power transformer breakdowns. Continuous online transformer monitoring is needed. The authors use paper insulation to evaluate transformer health for continuous online transformer monitoring. The study suggests a new artificial intelligence method for estimating paper insulation residual life in oil‐immersed power transformers. The four artificial intelligence models use backpropagation‐based neural networks to predict paper insulation lifespan. Four primary transformer insulating paper failure indices—degree of polymerisation, 2‐furfuraldehyde, carbon monoxide, and carbon dioxide—form the basis of these models. Each model, including the backpropagation‐based neural networks, estimates paper insulation life using one failure index, along with moisture and temperature data. Optimisation techniques enhance hidden layer neurons and epoch count for improved performance. Results are validated against literature‐based life models, establishing a precise input–output correlation. This method accurately predicts the remaining useable life of power transformer paper insulation, enabling utilities to take proactive measures for safe and efficient transformer operation. [ABSTRACT FROM AUTHOR]

This document is a summary of a special issue of the journal Sensors, titled "Emerging AI+X-Based Sensor and Networking Technologies including Selected Papers from ICGHIT 2022–2023." The special issue features selected papers from the 10th and 11th International Conferences on Green and Human Information Technology (ICGHITs), which were held in Korea and Thailand. The conferences focused on the theme of "Emerging Artificial Intelligent (AI)+X technology" and "Hyper Automation + Human AI" respectively. The selected papers cover various topics such as network security, routing protocols, signal detection, and clustering mechanisms, all incorporating AI-based methods. The issue also includes papers on topics like secure authentication, distance estimation in RFID systems, energy optimization in smart homes, blockchain technology, and radar signal detection. The authors emphasize the importance of both technology and humanity in advancing green and information technologies. [Extracted from the article]

Forecasting has extreme importance in industry due to the numerous competitive advantages that it provides, allowing to foresee what might happen and adjust management decisions accordingly. Industries increasingly use sensors, which allow for large-scale data collection. Big datasets enable training, testing and application of complex predictive algorithms based on machine learning models. The present paper focuses on predicting values from sensors installed on a pulp paper press, using data collected over three years. The variables analyzed are electric current, pressure, temperature, torque, oil level and velocity. The results of XGBoost and artificial neural networks, with different feature vectors, are compared. They show that it is possible to predict sensor data in the long term and thus predict the asset's behaviour several days in advance. [ABSTRACT FROM AUTHOR]

Digital systems storing cadastral data in vector format are considered effective due to their ability of offering interactive services to citizens and other land-related systems. The adoption of such systems is ubiquitous, but when adopted, they create two non-compatible systems with paper-based cadastral systems whose information needs to be digitised. This study proposes a new approach that is fast and accurate for transforming paper-based cadastral data into digital systems. The proposed method involves deep-learning techniques of the LCNN and ResNet-50 for detecting cadastral parcels and their numbers, respectively, from the cadastral plans. It also contains four functions defined to speed up transformations and compilations of the cadastral plan's data in digital systems. The LCNN is trained and validated with 968 samples. The ResNet-50 is trained and validated with 106,000 samples. The Structural-Average-Precision ( sAP 10 ) achieved with the LCNN was 0.9057. The Precision, Recall and F1-Score achieved with the ResNet-50 were 0.9650, 0.9648 and 0.9649, respectively. These results confirmed that the new method is accurate enough for implementation, and we tested it with a huge set of data from Tanzania. Its performance from the experimented data shows that the proposed method could effectively transform paper-based cadastral data into digital systems. [ABSTRACT FROM AUTHOR]

The article discusses two computer science research papers concerning artificial intelligence (AI). Topics explored include the susceptibility of deep convolutional neural networks to input pertubations acknowledged in the 2013 study "Intriguing Properties of Neural Networks," by Christian Szegedy and colleagues, and the capability of sequence-to-sequence language models to execute short computer programs reported in the 2014 study "Learning to Execute," by Wojciech Zaremba and Ilya Sutskever.

This paper is aimed to develop a hybrid model (PCA-ANN) to predict the extractive content in eucalyptus wood clones. The input variables to the virtual analyzer are planting parameters available from the forest inventory, therefore the prediction does not rely on laboratory analysis of the wood samples, affording a quick estimate of the extractive contents. This study further bridges the literature gap on the investigation of the cause of variability of extractive content in eucalyptus wood. The PCA-ANN was identified from experimental data to predict and monitor the extractive content, since laboratory measurements can take several days and become available only after wood processing. The experimental data contained information on ten species of eucalyptus clones from five regions in the extreme south of Bahia, Brazil. Principal Component Analysis (PCA) firstly assessed the impact of planting variables on the extractives content. The variability of the data was represented by eight principal components and the variables that mostly contribute to the extractive content are: potential acidity, iron, saturation of aluminum, magnesium, pH, base saturation, remaining phosphorus, zinc, manganese and copper. The artificial neural network (ANN) with the 8 principal components in the input layer showed that the PCA could effectively reduce the dimensionality of the data. For practical purposes, though, the ANN with 10 input variables and 16 neurons in the hidden layer, presenting an average relative deviation of 1.5%, is recommended. The prediction of the extractive content is essential to allow preventive management practices toward the improvement of yield and quality of the cellulosic pulp. [ABSTRACT FROM AUTHOR]

In this study, we propose the use of artificial synaptic transistors with coplanar-gate structures fabricated on paper substrates comprising biocompatible and low-cost potato-starch electrolyte and indium–gallium–zinc oxide (IGZO) channels. The electrical double layer (EDL) gating effect of potato-starch electrolytes enabled the emulation of biological synaptic plasticity. Frequency dependence measurements of capacitance using a metal-insulator-metal capacitor configuration showed a 1.27 μF/cm2 at a frequency of 10 Hz. Therefore, strong capacitive coupling was confirmed within the potato-starch electrolyte/IGZO channel interface owing to EDL formation because of internal proton migration. An electrical characteristics evaluation of the potato-starch EDL transistors through transfer and output curve resulted in counterclockwise hysteresis caused by proton migration in the electrolyte; the hysteresis window linearly increased with maximum gate voltage. A synaptic functionality evaluation with single-spike excitatory post-synaptic current (EPSC), paired-pulse facilitation (PPF), and multi-spike EPSC resulted in mimicking short-term synaptic plasticity and signal transmission in the biological neural network. Further, channel conductance modulation by repetitive presynaptic stimuli, comprising potentiation and depression pulses, enabled stable modulation of synaptic weights, thereby validating the long-term plasticity. Finally, recognition simulations on the Modified National Institute of Standards and Technology (MNIST) handwritten digit database yielded a 92% recognition rate, thereby demonstrating the applicability of the proposed synaptic device to the neuromorphic system. [ABSTRACT FROM AUTHOR]

This paper introduced a novel olfactory visualization freshness sensor array prepared by dropping pH indicators on UV lithography hydrophilic–hydrophobic paper under room temperature. The sensor array was applied in Grass carp spoilage classification. The sensor array can generate different discoloration patterns that respond to the pH change of the fish spoil; therefore, it can distinguish Grass carp freshness using pattern recognition. Classification models were built with linear discriminant analysis (LDA) and backpropagation artificial neural network (BP‐ANN) after extracting the sensor array's feature color information with principal component analysis (PCA). The performance of the BP‐ANN model was superior to that of the LDA model, with an optimum recognition rate of 95.45% (training set) and 90.90% (testing set). In conclusion, with a suitable algorithm choice and rational pH indicator arrangement, this olfactory visualization freshness sensor array can potentially monitor food freshness. We prepared Grass carp freshness sensor array through dropping pH‐indicators on hydrophilic–hydrophobic filter paper that fabricated by UV lithography under room temperature. The hydrophobic edges of the filter paper can maintain the sensor spots' shape and provide stable and consistent colorimetric change for Grass carp freshness recognition. Colorimetric classification models are built using LDA and BP‐ANN based on pattern recognition, and the recognition rate of the BP‐ANN model is above 90%. Novelty impact statement: We prepared Grass carp freshness sensor array through dropping pH‐indicators on hydrophilic‐hydrophobic filter paper that fabricated by UV lithography under room temperature. The hydrophobic edges of the filter paper can maintain the sensor spots' shape and provide stable and consistent colorimetric change for Grass carp freshness recognition. Colorimetric classification models are built using LDA and BP‐ANN based on pattern recognition, and the recognition rate of the BP‐ANN model is above 90 %. [ABSTRACT FROM AUTHOR]

In recent years, the wide application of deep neural network models has brought serious risks of intellectual property rights infringement. Embedding a watermark in a network model is an effective solution to protect intellectual property rights. Although researchers have proposed schemes to add watermarks to models, they cannot prevent attackers from adding and overwriting original information, and embedding rates cannot be quantified. Therefore, aiming at these problems, this paper designs a high embedding rate and tamper-proof watermarking scheme. We employ wet paper coding (WPC), in which important parameters are regarded as wet blocks and the remaining unimportant parameters are regarded as dry blocks in the model. To obtain the important parameters more easily, we propose an optimized probabilistic selection strategy (OPSS). OPSS defines the unimportant-level function and sets the importance threshold to select the important parameter positions and to ensure that the original function is not affected after the model parameters are changed. We regard important parameters as an unmodifiable part, and only modify the part that includes the unimportant parameters. We selected the MNIST, CIFAR-10, and ImageNet datasets to test the performance of the model after adding a watermark and to analyze the fidelity, robustness, embedding rate, and comparison schemes of the model. Our experiment shows that the proposed scheme has high fidelity and strong robustness along with a high embedding rate and the ability to prevent malicious tampering. [ABSTRACT FROM AUTHOR]

• Five Machine Learning (ML) models compared for wave height time series prediction. • Complex ML models do not outperform simple AR in wave height time series prediction. • Comment to related papers: signal decomposition in test set series is WRONG. Significant Wave Height (SWH) is crucial in many aspect of ocean engineering. The accurate prediction of SWH has therefore been of immense practical value. Recently, Artificial Intelligence (AI) time series prediction methods have been widely used for single-point short-term SWH time-series forecasting, resulting in many AI-based models claiming to achieve good results. However, the extent to which these complex AI models can outperform traditional methods has largely been overlooked. This study compared five different models - AutoRegressive (AR), eXtreme Gradient Boosting (XGB), Artificial Neural Network (ANN), Long Short-Term Memory (LSTM), and WaveNet - for their performance on SWH time series prediction at 16 buoy locations. Surprisingly, the results suggest that the differences of performance among different models are negligible, indicating that all these AI models have only "learned" the linear auto-regression from the data. Additionally, we noticed that many recent studies used signal decomposition method for such time series prediction, and most of them decomposed the test sets, which is WRONG. [ABSTRACT FROM AUTHOR]

One of the most widely used measures of scientific impact is the number of citations. However, due to its heavy-tailed distribution, citations are fundamentally difficult to predict but can be improved. This study was aimed at investigating the factors and parts influencing the citation number of a scientific paper in the otology field. Therefore, this work proposes a new solution that utilizes machine learning and natural language processing to process English text and provides a paper citation as the predicted results. Different algorithms are implemented in this solution, such as linear regression, boosted decision tree, decision forest, and neural networks. The application of neural network regression revealed that papers' abstracts have more influence on the citation numbers of otological articles. This new solution has been developed in visual programming using Microsoft Azure machine learning at the back end and Programming Without Coding Technology at the front end. We recommend using machine learning models to improve the abstracts of research articles to get more citations. [ABSTRACT FROM AUTHOR]

Artificial intelligence is more present than ever, both in our society in general and in science. At the center of this development has been the concept of deep learning, the use of artificial neural networks that are many layers deep and can often reproduce human‐like behavior much better than other machine‐learning techniques. The articles in this collection are some recent examples of its application for X‐ray photon science and crystallography that have been published in Journal of Applied Crystallography. [ABSTRACT FROM AUTHOR]

Due to the increasing size of integrated circuits (ICs), their design and optimization phases (i.e., computer-aided design, CAD) grow increasingly complex. At design time, a large design space needs to be explored to find an implementation that fulfills all specifications and then optimizes metrics like energy, area, delay, reliability, etc. At run time, a large configuration space needs to be searched to find the best set of parameters (e.g., voltage/frequency) to further optimize the system. Both spaces are infeasible for exhaustive search typically leading to heuristic optimization algorithms that find some tradeoff between design quality and computational overhead. Machine learning (ML) can build powerful models that have successfully been employed in related domains. In this survey, we categorize how ML may be used and is used for design-time and run-time optimization and exploration strategies of ICs. A metastudy of published techniques unveils areas in CAD that are well explored and underexplored with ML, as well as trends in the employed ML algorithms. We present a comprehensive categorization and summary of the state of the art on ML for CAD. Finally, we summarize the remaining challenges and promising open research directions. [ABSTRACT FROM AUTHOR]

Paper mills are among the most polluting industries, responsible for many organic and inorganic compounds emissions. The fibres electro-kinetic features strongly affect the ability to retain fillers since the fillers–fibres interactions are charge induced. The control and the prediction of these parameters would represent a precious aid for process management, allowing the fillers retention enhancement, a lower environmental impact and the paper sheet properties streamlining. The work presented deals with the implementation and training of four artificial neural networks (ANNs) for the prediction of the main electrochemical and physical features of cellulose pulp and paper. First, two ANNs predict the electrochemical parameters. Following, they were applied to predict the paper sheet properties and fillers retention. The neural models implemented showed outstanding prediction performance, with R2 in the order of 0.999 and a low mean error. The results demonstrate how Artificial Neural Networks may be a valuable instrument for paper mill pollutant reduction. However, they suggest a more inclusive investigation for a better fibres behaviour representation. • Main process parameters of an industrial papermaking process were identified. • Experimental datasets were achieved during industrial production. • Artificial Neural Networks were trained for process parameters prediction. • Accurate predictions of papermaking process were obtained. [ABSTRACT FROM AUTHOR]

An instrument-free, user-friendly, and cost-effective PAD colorimetric sensor that can quantitative detection of H 2 O 2 has been realized by using bimetallic nickel–cobalt selenides as highly active peroxidase mimic and smartphone integrated with dark cavity as detector. Integrated with an ANN model and a self-compiled easy-to-use smartphone APP, the intelligent and on-site detection of H 2 O 2 was constructed, which exhibited an ultra-wide dynamic range. [Display omitted] • An effective paper-based colorimetric sensor was prepared based on nanozyme. • The optimized Ni 0.75 Co 0.25 Se exhibited excellent peoxidase-mimetic activities. • The on-site detection of H 2 O 2 was constructed by a self-compiled smartphone APP. • The machine learning-assisted sensor can detect H 2 O 2 over a wide dynamic range. Paper-based analytical devices (PADs) integrated with smartphones have shown great potential in various fields, but they also face challenges such as single signal reading, complex data processing and significant environmental impacting. In this study, a colorimetric PAD platform has been proposed using bimetallic nickel–cobalt selenides as highly active peroxidase mimic, smartphone with 3D-printing dark-cavity as a portable detector and an artificial neural network (ANN) model as multi-signal processing tool. Notably, the optimized nickel–cobalt selenides (Ni 0.75 Co 0.25 Se with Ni to Co ratio of 3/1) exhibit excellent peoxidase-mimetic activities and are capable of catalyzing the oxidation of four chromogenic reagents in the presence of H 2 O 2. Using a smartphone with image capture function as a friendly signal readout tool, the Ni 0.75 Co 0.25 Se based four channel colorimetric sensing paper is used for multi-signal quantitative analysis of H 2 O 2 by determining the Grey, red (R), green (G) and blue (B) channel values of the captured pictures. An intelligent on-site detection method for H 2 O 2 has been constructed by combining an ANN model and a self-programmed easy-to-use smartphone APP with a dynamic range of 5 μM to 2 M. Noteworthy, machine learning-assisted smartphone sensing devices based on nanozyme and 3D printing technology provide new insights and universal strategies for visual ultrasensitive detection in a variety of fields, including environments monitoring, biomedical diagnosis and safety screening. [ABSTRACT FROM AUTHOR]

These developments have the potential to foster additional innovation, facilitate future problem-solving and optimisation strategies, and ultimately contribute to mature OWC technologies. Keywords: optical communication; underwater optical wireless communication EN optical communication underwater optical wireless communication 87 90 4 08/24/23 20230801 NES 230801 Since 2011, optical wireless communication (OWC) technologies have gained momentum. These technologies include visible light communications (VLC), underwater VLC, Li-Fi, optical camera communications (OCC), visible light positioning, visible light sensing and free space optics, among others. [Extracted from the article]

Machine learning (ML), a form of artificial intelligence (AI), is being increasingly employed in neurology. Reported performance metrics often match or exceed the efficiency of average clinicians. The neurologist is easily baffled by the underlying concepts and terminologies associated with ML studies. The superlative performance metrics of ML algorithms often hide the opaque nature of its inner workings. Questions regarding ML model's interpretability and reproducibility of its results in real-world scenarios, need emphasis. Given an abundance of time and information, the expert clinician should be able to deliver comparable predictions to ML models, a useful benchmark while evaluating its performance. Predictive performance metrics of ML models should not be confused with causal inference between its input and output. ML and clinical gestalt should compete in a randomized controlled trial before they can complement each other for screening, triaging, providing second opinions and modifying treatment. [ABSTRACT FROM AUTHOR]

Drying of sewage sludge is typically modeled as simultaneous heat and mass transfer phenomena. The capability of conventional models to take into account crust formation, cracks, and shrinking is limited. Artificial neural networks (ANNs) are suitable tools for dynamic representation of drying processes; however, obtaining a suitable database is a resource consuming task. Based on the Taguchi method, nine experiments were defined to set up a training database and to develop an ANN model. A high Pearson correlation coefficient was verified when comparing the drying kinetic curve generated by the ANN model with the one obtained during the validation experiments. [ABSTRACT FROM PUBLISHER]

The colorimetric method is usually used to test the concentration of substances. However, this method has a big error since different people have different sensitivities to colors. In this paper, in order to solve the identification problem of the color and the concentration of the test paper, firstly, we found out that the concentration of substance is correlated with the color reading by using the Pearson's Chi-squared test method. And by the concentration coefficient of Pearson correlation analysis, the concentration of substance and color reading is highly correlated. Secondly, according to the RGB value of the paper image, the color moments of the image are calculated as the characteristics of the image, and the Levenberg–Marquardt (LM) neural network is established to classify the concentration of the substance. The accuracy of the training set model is 94.5%, and the accuracy of the test set model is 87.5%. The model precision is high, and the model has stronger generalization ability. Therefore, according to the RGB value of the test paper image, it is effective to establish the LM neural network model to identify the substance concentration. [ABSTRACT FROM AUTHOR]

Background: Road accidents are among the most important causes of death and severe personal and financial injuries. Also, its profound social, cultural, and economic effects threaten human societies. This study aimed to estimate the trend of traffic accident victims in Yazd Province, Iran, to predict the number of traffic accident victims in this province. Materials and Methods: Based on traffic casualty statistics referred to forensic medicine in Yazd Province within April 1989 and March 2017 referred to Forensic Medicine of Yazd Province and using an artificial neural network to predict the number of injured for 12 months ending in 2020 has been paid. The neural network used in this study had 12 inputs, one output, and 5 hidden layers. The network predicts the relationship between data after training and learning. The network is considered the MSE benchmark. Results: The number of injured in traffic accidents in Yazd Province in 2020 was equal to 7052 people, with the highest number in December with 832 people and the lowest in June with 414 people. The exact method of use was equal to 92 cases. Conclusion: The trend of traffic accident casualties in Yazd Province in 2020 will be declining. For future research, the exact method designed in this study can be examined with other methods for the best response level. [ABSTRACT FROM AUTHOR]

Electronic nose systems when deployed in network mesh can effectively provide a low budget and onsite solution for the industrial obnoxious gaseous measurement. For accurate and identical prediction capability by all the electronic nose systems, a reliable calibration transfer model needs to be implemented in order to overcome the inherent sensor array variability. In this work, robust regression (RR) is used for calibration transfer between two electronic nose systems using a Box–Behnken (BB) design. Out of the two electronic nose systems, one was trained using industrial gas samples by four artificial neural network models, for the measurement of obnoxious odours emitted from pulp and paper industries. The emissions constitute mainly of hydrogen sulphide (H 2 S), methyl mercaptan (MM), dimethyl sulphide (DMS) and dimethyl disulphide (DMDS) in different proportions. A Box–Behnken design consisting of 27 experiment sets based on synthetic gas combinations of H 2 S, MM, DMS and DMDS, were conducted for calibration transfer between two identical electronic nose systems. Identical sensors on both the systems were mapped and the prediction models developed using ANN were then transferred to the second system using BB–RR methodology. The results showed successful transmission of prediction models developed for one system to other system, with the mean absolute error between the actual and predicted concentration of analytes in mg L −1 after calibration transfer (on second system) being 0.076, 0.1801, 0.0329, 0.427 for DMS, DMDS, MM, H 2 S respectively. [ABSTRACT FROM AUTHOR]

Guizzaro et al. ([2]) evaluated the performance of different estimation techniques in trials with incomplete follow-up after discontinuation when a treatment-policy strategy is implemented. They provided several guidance on the estimation of an estimand that employs a treatment-policy strategy for treatment discontinuation. [Extracted from the article]

In this paper two procedures are developed for the identification of the parameters contained in an orthotropic elastic-plastic-hardening model for free standing foils, particularly of paper and paperboard. The experimental data considered are provided by cruciform tests and digital image correlation. A simplified version of the constitutive model proposed by Xia et al. (Int J Solids Struct 39:4053-4071, ) is adopted. The inverse analysis is comparatively performed by the following alternative computational methodologies: (a) mathematical programming by a trust-region algorithm; (b) proper orthogonal decomposition and artificial neural network. The second procedure rests on preparatory once-for-all computations and turns out to be applicable economically and routinely in industrial environments. [ABSTRACT FROM AUTHOR]

[Display omitted] • Large datasets of U and UP are constructed with 1526 and 743 fuel samples. • The effect of C, H, and O atomic ratios on HHV is investigated by ternary plots. • HHV of any type of waste and fuel is estimated by artificial neural networks. • Hyperparameter optimization is carried out to obtain best performing ANN models. • Ultimate analysis data is observed to be sufficient for HHV estimation of fuels. Higher heating value (HHV) is one of the most important parameters in determining the quality of the fuels. In this study, comparatively large datasets of ultimate and proximate analysis are constructed to be used in HHV estimation of several classes of fuels, including char & fossil fuels, agricultural wastes, manure (chicken, cow, horse, sheep, llama, and pig), sludge (like paper, paper-mil, sewage, and pulp), micro/macro-algae's, wastes (RDF and MSW), treated woods, untreated woods, and others (non-fossil pyrolysis oils) between the HHV range of 4.22–55.55 MJ/kg. The relationships of carbon, hydrogen, and oxygen atomic ratios for fuel classes are illustrated by using ternary plots, and the effects of elemental composition on HHV was analyzed with the extensive dataset. Then, the ultimate (U) and ultimate & proximate (UP) datasets were utilized separately to estimate the HHV by using artificial neural networks (ANN). Hyperparameter optimization was carried out and the best performing ANNs were determined for each dataset, which yielded R2 values of 0.9719 and 0.9715, respectively. The results indicated that while ANNs trained by both datasets perform remarkably well, utilization of U dataset is sufficient for HHV estimation. Finally, the best performing ANN models for both U and UP datasets are given in a directly utilizable format enabling the accurate estimation of HHV of any fuel for optimization of fuel processing and waste management operations. [ABSTRACT FROM AUTHOR]

This paper studies the impact of geomorphic and topographic evolution on environmental planning so as to lay the foundation for future rural environmental planning in Jinan. This paper analyzes the impact of landform evolution on environmental planning and introduces the types of spring rural settlements in hilly landforms and intermountain plains, respectively. On this basis, an artificial neural network is used to reflect the dynamic change law of spring water and is combined with a fuzzy evaluation method to evaluate the impact of underground space development in Jinan on spring water and human activities. Through empirical analysis, it is known that artificial neural networks can accurately detect the dynamic change law of spring water, and on this basis, fuzzy evaluation methods are used to design the impact of spring water-rural settlement landscape planning. The impact of spatial development on spring water is divided into four levels: the stronger impact area, the strong impact area, the general impact area, and the small impact area of underground space development on spring water, which account for about 1.036%, 1.001%, 0.371%, and 97.591% of the total area of the study area, respectively. [ABSTRACT FROM AUTHOR]

This paper aims to improve the level of social credit system and the accuracy and efficiency of bank users' credit scoring by using business intelligence technology based on deep neural network (DNN). Firstly, based on the theory of personal credit evaluation factors, a comprehensive credit evaluation factor system is constructed, taking into account social and economic background, consumption habits, behavior patterns and other factors. Meanwhile, back propagation neural network (BPNN) theory is introduced as the core method of modeling to cope with the nonlinear relationship in the credit scoring task and the demand of large-scale data processing. Secondly, by analyzing the operation process of BPNN in detail, the specific application in credit scoring model is emphasized. Finally, on the basis of theory and operation, this paper implements a credit scoring model for bank users based on BPNN theory. The experimental results show that the model realized in this paper can automatically discover the key attributes and internal rules in the sampled data, and adjust the weight and threshold of the network by modifying the parameters and network structure to meet the expected requirements. The accuracy of the credit score of the predicted sample data reaches 99.5%, and the prediction error is very small, which has a good prediction effect. This paper provides a feasible solution for business intelligence and DNN in the field of credit scoring, and also provides strong empirical support for improving the level of social credit system. [ABSTRACT FROM AUTHOR]

Digital technologies sustain today's world. Every part of the world is working towards digital technologies, which none of us can eliminate. Enormous growth is achieved only by unexpected acceleration by digital technologies, including the Internet of Everything (IoE), Artificial Neural Networks (ANN), Machine Learning (ML), Internet of Things (IoT), Artificial Intelligence (AI), Deep Learning (DL), and many more. These technologies started occupying all the engineering sectors, including manufacturing. This paper focuses on tribology analysis related to manufacturing concerning various digital manufacturing technologies. The paper narration includes Tribology using digital technologies wherein the journals and patent landscape analysis abet them. In trend, Tribology utilizes all these technologies today and envisages its growth with the predominant technological invention in the border view. The survey of various literature reveals that only three digital technologies, including AI, ML, and ANN, are used by tribologists around the globe. Other Technologies like Evolutionary Algorithm (EA), Support Vector Machine (SVM), and Adaptive Neuro-Fuzzy Interference Systems (ANFIS) are not used predominantly. [ABSTRACT FROM AUTHOR]

Recent increases in global food demand have made this research and, therefore, the prediction of agricultural commodity prices, almost imperative. The aim of this paper is to build efficient artificial intelligence methods to effectively forecast commodity prices in light of these global events. Using three separate, well-structured models, the commodity prices of eleven major agricultural commodities that have recently caused crises around the world have been predicted. In achieving its objective, this paper proposes a novel forecasting model for agricultural commodity prices using the extreme learning machine technique optimized with the genetic algorithm. In predicting the eleven commodities, the proposed model, the extreme learning machine with the genetic algorithm, outperforms the model formed by the combination of long short-term memory with the genetic algorithm and the autoregressive integrated moving average model. Despite the fluctuations and changes in agricultural commodity prices in 2022, the extreme learning machine with the genetic algorithm model described in this study successfully predicts both qualitative and quantitative behavior in such a large number of commodities and over such a long period of time for the first time. It is expected that these predictions will provide benefits for the effective management, direction and, if necessary, restructuring of agricultural policies by providing food requirements that adapt to the dynamic structure of the countries. [ABSTRACT FROM AUTHOR]

Background: MicroRNAs (miRNAs) emerge in various organisms, ranging from viruses to humans, and play crucial regulatory roles within cells, participating in a variety of biological processes. In numerous prediction methods for miRNA-disease associations, the issue of over-dependence on both similarity measurement data and the association matrix still hasn't been improved. In this paper, a miRNA-Disease association prediction model (called TP-MDA) based on tree path global feature extraction and fully connected artificial neural network (FANN) with multi-head self-attention mechanism is proposed. The TP-MDA model utilizes an association tree structure to represent the data relationships, multi-head self-attention mechanism for extracting feature vectors, and fully connected artificial neural network with 5-fold cross-validation for model training. Results: The experimental results indicate that the TP-MDA model outperforms the other comparative models, AUC is 0.9714. In the case studies of miRNAs associated with colorectal cancer and lung cancer, among the top 15 miRNAs predicted by the model, 12 in colorectal cancer and 15 in lung cancer were validated respectively, the accuracy is as high as 0.9227. Conclusions: The model proposed in this paper can accurately predict the miRNA-disease association, and can serve as a valuable reference for data mining and association prediction in the fields of life sciences, biology, and disease genetics, among others. [ABSTRACT FROM AUTHOR]

Visual information is important in final approach and landing phases for an approaching aircraft, it presents supplementary source for navigation system, and provides backup guidance when radio navigation fails, or even supports a complete vision‐based landing. Relative position and attitude can be solved from the runway features in the image. Traditional runway detection methods have high latency and low accuracy, which is unable to satisfy the requirements for a safe landing. This paper proposes a real‐time runway detection model, efficient runway feature extractor (ERFE), based on deep convolutional neural network, generating semantic segmentation and feature lines output. In order to evaluate the model's effectiveness, a benchmark is proposed to calculate the actual error between predicted feature line and ground truth one. A novel runway dataset which is based on pictures from Microsoft Flight Simulator 2020 (FS2020), is also proposed in this paper to train and test the model. The dataset will be released at https://www.kaggle.com/datasets/relufrank/fs2020‐runway‐dataset. ERFE shows excellent performance in FS2020 dataset, it gives satisfactory results even for real runway images excluded from our dataset. [ABSTRACT FROM AUTHOR]

This paper presents an artificial neural network (ANN) based method for overhead lines magnetic flux density estimation. The considered method enables magnetic flux density estimation for arbitrary configurations and load conditions for single-circuit, multi-circuit, and also overhead lines that share a common corridor. The presented method is based on the ANN model that has been developed using the training dataset that is produced by a specifically designed algorithm. This paper aims to demonstrate a systematic and comprehensive ANN-based method for simple and effective overhead lines magnetic flux density estimation. The presented method is extensively validated by utilizing experimental field measurements as well as the most commonly used calculation method (Biot - Savart law based method). In order to facilitate extensive validation of the considered method, numerous magnetic flux density measurements are conducted in the vicinity of different overhead line configurations. The validation results demonstrate that the used method provides satisfactory results. Thus, it could be reliably used for new overhead lines' design optimization, as well as for legally prescribed magnetic flux density level evaluation for existing overhead lines. [ABSTRACT FROM AUTHOR]

• A model to explore the multiphysics characteristic of semiconductors is presented. • The model determines the thermal and mechanical properties of complex patterns. • Results show a strong correlation between thermal and mechanical properties. • Dielectric bands asymmetrically affect thermal and mechanical behavior. • Machine learning can predict one property from another. As semiconductor performance improves through advanced package designs, it becomes important to consider both thermal and mechanical properties. Better understanding their relationship enhances system design and optimization. This study has introduced a numerical method that takes into account both thermal and mechanical fluxes to construct thermal and mechanical property maps for practical application in semiconductor engineering. Furthermore, this paper investigated the relationship between the two properties using the constructed property maps in commercially available semiconductor packages. Owing to the complexity of packaging design patterns, a coupled isoparametric mapping and machine learning (ML) method was introduced to investigate their effects. The model then determines and investigates the anisotropic equivalent thermal and mechanical properties of the commercialized semiconductor packages with complex pattern designs, according to the package materials, volume fractions of each material, and design patterns. This approach pursues more sophistication and practicality compared to simplified composite structure property evaluation models. Additionally, all processes in the algorithm are automated based on ML methods, making them practically applicable in the semiconductor industry. The study shows that there is a strong correlation between the thermal and mechanical characteristics in the complex package patterns. This relationship was able to form a fairly clear category based on the shape of the dielectric band because the dielectric band had significantly different effects on the thermal and mechanical fluxes. The study discussed the physical implications of the similarities and differences between the two behaviors and validated the results of the equivalent properties through finite element (FE) analysis. Finally, the study cross-validates the relationship by showing that information from one flux behavior can be used to predict the other based on the ML method. Based on the results, this paper can provide a better understanding of thermal and mechanical fluxes in semiconductor package patterns for package design and optimization. [ABSTRACT FROM AUTHOR]

In order to accurately estimate the period of X-ray pulsars to improve navigation performance, this paper proposes a pulsar period estimation method based on photon energy using reverse Hilbert coding and double Convolutional Neural Networks (CNNs) discrimination. This method uses photon energy information to perform epoch folding. It converts one-dimensional contour information into two-dimensional image signals through reverse Hilbert curve and recognizes contour image features through CNN models to determine the optimal period. According to the simulation results, the period estimation accuracy of this method is 0.5350 ns, which is 65.71% higher than the χ 2 epoch folding method. The contour phase accuracy is 0.0004767, which is 41.93% higher than the χ 2 epoch folding method. At the same time, the observation time and noise interference that may affect the accuracy of period estimation are also quantitatively analyzed. In addition, in order to simulate real navigation scenarios, this paper also conducts dynamic period estimation experiments on PSR B0531+21 pulsar in a specific period of time. The method proposed in this paper has the advantages of high precision, fast calculation speed, strong anti-interference ability and accurate dynamic period estimation, which can significantly improve the navigation performance of X-ray pulsars. • The proposed period estimation method uses photon energy information for contour weighted folding. • The proposed method uses reverse Hilbert curve to convert one-dimensional contour information into two-dimensional image information. • Convolutional Neural Network models are used to optimize pulsar period estimation. [Display omitted] [ABSTRACT FROM AUTHOR]

Convolutional Neural Networks (CNNs) are a kind of artificial neural network designed to extract features and find out patterns for tasks such as segmentation, recognizing objects, and drawing up classification. Within a CNNs architecture, pooling operations are used until the number of parameters and the computational complexity are reduced. Numerous papers have focused on investigating the impact of pooling on the performance of Convolutional Neural Networks (CNNs), leading to the development of various pooling models. Recently, a fuzzy pooling operation based on type-1 fuzzy sets was introduced to cope with the local imprecision of the feature maps. However, in fuzzy set theory, it is not always accurate to assume that the degree of non-membership of an element in a fuzzy set is simply the complement of the degree of membership. This is due to the potential existence of a hesitation degree, which implies a certain level of uncertainty. To overcome this limitation, intuitionistic fuzzy sets (IFS) were introduced to incorporate the concept of a degree of hesitation. In this paper, we introduce a novel pooling operation based on intuitionistic fuzzy sets to incorporate the degree of hesitation heretofore neglected by a fuzzy pooling operation based on classical fuzzy sets, and we investigate its performance in the context of image classification. Intuitionistic pooling is performed in four steps: bifuzzification (by the transformation of data through the use of membership and non-membership maps), first aggregation (through the transformation of the IFS into a standard fuzzy set, second aggregation (through the transformation and use of a sum operator), and the defuzzification of feature map neighborhoods by using a max operator. IFS pooling is used for the construction of an intuitionistic pooling layer that can be applied as a drop-in replacement for the current, fuzzy (type-1) and crisp, pooling layers of CNN architectures. Various experiments involving multiple datasets demonstrate that an IFS-based pooling can enhance the classification performance of a CNN. A benchmarking study reveals that this significantly outperforms even the most recent pooling models, especially in stochastic environments. [ABSTRACT FROM AUTHOR]

This document discusses the degradation and failure mechanisms of dielectric insulation in medium- and high-voltage power equipment. It highlights the importance of controlling insulation material degradation to prevent equipment failures and reduce the risk of environmental pollution. The document includes several research papers that address various topics related to the measurement, monitoring, and improvement of power equipment components. These papers cover issues such as winding breakdown faults in transformers, overvoltages caused by vacuum circuit breaker interruptions, insulation resistance degradation in cables, temperature rise in composite insulators, partial discharges and their effects on insulation, and acoustic inspection for detecting partial discharges. The document also presents studies on the technical condition of on-load tap changers, the behavior of silicone elastomers under electrical and mechanical stress, and the percolation phenomenon in square matrices. [Extracted from the article]

Aiming at the shortcomings of single-sensor sensing information characterization ability, which is easily interfered with by external environmental factors, a method of intelligent perception is proposed in this paper. This method integrates multi-source and multi-level information, including spindle temperature field, spindle thermal deformation, operating parameters, and motor current. Firstly, the internal and external thermal-error-related signals of the spindle system are collected by sensors, and the feature parameters are extracted; then, the radial basis function (RBF) neural network is utilized to realize the preliminary integration of the feature parameters because of the advantages of the RBF neural network, which offers strong multi-dimensional solid nonlinear mapping ability and generalization ability. Thermal-error decision values are then generated by a weighted fusion of different pieces of evidence by considering uncertain information from multiple sources. The spindle thermal-error sensing experiment was based on the spindle system of the VMC850 (Yunnan Machine Tool Group Co., LTD, Yunnan, China) vertical machining center of the Yunnan Machine Tool Factory. Experiments were designed for thermal-error sensing of the spindle under constant speed (2000 r/min and 4000 r/min), standard variable speed, and stepped variable speed conditions. The experiment's results show that the prediction accuracy of the intelligent-sensing model with multi-source information fusion can reach 98.1%, 99.3%, 98.6%, and 98.8% under the above working conditions, respectively. The intelligent-perception model proposed in this paper has higher accuracy and lower residual error than the traditional BP neural network perception and wavelet neural network models. The research in this paper provides a theoretical basis for the operation, maintenance management, and performance optimization of machine tool spindle systems. [ABSTRACT FROM AUTHOR]

This paper addresses issues concerning biometric authentication based on handwritten signatures. Our research aimed to check whether a handwritten signature acquired with a mobile device can effectively verify a user's identity. We present a novel online signature verification method using coordinates of points and pressure values at each point collected with a mobile device. Convolutional neural networks are used for signature verification. In this paper, three neural network models are investigated, i.e., two self-made light SigNet and SigNetExt models and the VGG-16 model commonly used in image processing. The convolutional neural networks aim to determine whether the acquired signature sample matches the class declared by the signer. Thus, the scenario of closed set verification is performed. The effectiveness of our method was tested on signatures acquired with mobile phones. We used the subset of the multimodal database, MobiBits, that was captured using a custom-made application and consists of samples acquired from 53 people of diverse ages. The experimental results on accurate data demonstrate that developed architectures of deep neural networks can be successfully used for online handwritten signature verification. We achieved an equal error rate (EER) of 0.63% for random forgeries and 6.66% for skilled forgeries. [ABSTRACT FROM AUTHOR]

Radio frequency interference (RFI) significantly hampers the target detection performance of frequency-modulated continuous-wave radar. To address the problem and maintain the target echo signal, this paper proposes a priori assumption on the interference component nature in the radar received signal, as well as a method for interference estimation and mitigation via time–frequency analysis. The solution employs Fourier synchrosqueezed transform to implement the radar's beat signal transformation from time domain to time–frequency domain, thus converting the interference mitigation to the task of time–frequency distribution image restoration. The solution proposes the use of image processing based on the dual-tree complex wavelet transform and combines it with the spatial domain-based approach, thereby establishing a dual-domain fusion interference filter for time–frequency distribution images. This paper also presents a convolutional neural network model of structurally improved UNet++, which serves as the interference estimator. The proposed solution demonstrated its capability against various forms of RFI through the simulation experiment and showed a superior interference mitigation performance over other CNN model-based approaches. [ABSTRACT FROM AUTHOR]

Giga-casting, a revolutionary approach for manufacturing large, single-piece car body components from aluminium, has emerged as a potential game-changer in the automotive industry. However, these large, thin-walled castings are prone to distortions during solidification and heat treatment processes. Straightening these distortions is crucial to ensure structural integrity, facilitate downstream assembly, and maintain aesthetic qualities. This paper proposes a novel method for straightening giga-cast components using a multi-pin straightening machine. The machine's versatility stems from its ability to adapt to various geometries through multiple strategically controlled straightening pins. This paper introduces the concept of a "straightening stroke decision algorithm" to achieve precise straightening and overcome the challenges of complex shapes. This algorithm determines the stroke length for each pin, combining a polynomial model representing the global stiffness of the component with a machine learning model that captures the stiffness changes arising from the current geometry. The effectiveness of the proposed approach is evaluated through comprehensive numerical experiments using finite element analyses. The straightening performance is assessed for the straightening algorithm with different machine learning models (deep neural network and XGBoost) and compared to a traditional optimisation method. The proposed surrogate models decided the straightening strokes so that the maximum remaining distortion became 0.02% of the largest dimension of each target geometry. The results of the numerical experiment showed that the proposed straightening method is suitable for straightening distortion in large thin-walled components. [ABSTRACT FROM AUTHOR]

Deep learning, a crucial technique for achieving artificial intelligence (AI), has been successfully applied in many fields. The gradual application of the latest architectures of deep learning in the field of time series forecasting (TSF), such as Transformers, has shown excellent performance and results compared to traditional statistical methods. These applications are widely present in academia and in our daily lives, covering many areas including forecasting electricity consumption in power systems, meteorological rainfall, traffic flow, quantitative trading, risk control in finance, sales operations and price predictions for commercial companies, and pandemic prediction in the medical field. Deep learning-based TSF tasks stand out as one of the most valuable AI scenarios for research, playing an important role in explaining complex real-world phenomena. However, deep learning models still face challenges: they need to deal with the challenge of large-scale data in the information age, achieve longer forecasting ranges, reduce excessively high computational complexity, etc. Therefore, novel methods and more effective solutions are essential. In this paper, we review the latest developments in deep learning for TSF. We begin by introducing the recent development trends in the field of TSF and then propose a new taxonomy from the perspective of deep neural network models, comprehensively covering articles published over the past five years. We also organize commonly used experimental evaluation metrics and datasets. Finally, we point out current issues with the existing solutions and suggest promising future directions in the field of deep learning combined with TSF. This paper is the most comprehensive review related to TSF in recent years and will provide a detailed index for researchers in this field and those who are just starting out. [ABSTRACT FROM AUTHOR]

Pattern recognition systems always misclassify anomalies, which can be dangerous for uninformed users. Therefore, anomalies must be filtered out from each classification. The main challenge for the anomaly filter design is the huge number of possible anomaly samples compared with the number of samples in the training set. Tailoring the filter for the given classifier is just the first step in this reduction. Paper tests the hypothesis that the filter trained in avoiding "near" anomalies will also refuse the "far" anomalies, and the anomaly detector is then just a classifier distinguishing between "far real" and "near anomaly" samples. As a "far real" samples generator was used, a Generative Adversarial Network (GAN) fake generator that transforms normally distributed random seeds into fakes similar to the training samples. The paper proves the assumption that seeds unused in fake training will generate anomalies. These seeds are distinguished according to their Chebyshev norms. While the fakes have seeds within the hypersphere with a given radius, the near anomalies have seeds within the sphere near cover. Experiments with various anomaly test sets have shown that GAN-based anomaly detectors create a reliable anti-anomaly shield using the abovementioned assumptions. The proposed anomaly detector is tailored to the given classifier, but its limitation is due to the need for the availability of the database on which the classifier was trained. [ABSTRACT FROM AUTHOR]

Point cloud registration is the process of aligning and merging multiple point clouds into a same coordinate system. It has many applications in computer vision, robotics, 3D reconstruction, augmented reality, and autonomous driving. Despite its wide-ranging utility, traditional algorithms grapple with challenges such as substantial noise, outliers, limited overlap, motion distortions, and handling large scenes. These complexities impede the effective deployment of point cloud registration in practical real-world scenarios. This paper conducts a comprehensive inquiry into the domain of deep learning-based point cloud registration. It synthesizes recent advancements in algorithms about point cloud registration grounded in deep learning. The exposition delineates insights from four distinct perspectives: multi-layer perceptron, deep neural network, graph convolutional network, and attention mechanism. Furthermore, the paper systematically reviews prevalent datasets and evaluation metrics associated with deep learning-based point cloud registration. A discussion on the existing challenges in point cloud registration and a forward-looking exploration of potential research directions are included. [ABSTRACT FROM AUTHOR]

De-mining operations are of critical importance for humanitarian efforts and safety in conflict-affected regions. In this paper, we address the challenge of enhancing the accuracy and efficiency of mine detection systems. We present an innovative Deep Learning architecture tailored for pulse induction-based Metallic Mine Detectors (MMD), so called DL-MMD. Our methodology leverages deep neural networks to distinguish amongst nine distinct materials with an exceptional validation accuracy of 93.5%. This high level of precision enables us not only to differentiate between anti-personnel mines, without metal plates but also to detect minuscule 0.2-g vertical paper pins in both mineralized soil and non-mineralized environments. Moreover, through comparative analysis, we demonstrate a substantial 3% and 7% improvement (approx.) in accuracy performance compared to the traditional K-Nearest Neighbors and Support Vector Machine classifiers, respectively. The fusion of deep neural networks with the pulse induction-based MMD not only presents a cost-effective solution but also significantly expedites decision-making processes in de-mining operations, ultimately contributing to improved safety and effectiveness in these critical endeavors. [ABSTRACT FROM AUTHOR]

Traditional turbulence models suffer from low accuracy and weak applicability when predicting complex separated flows, such as those that occur in shock boundary layers. To overcome this problem, the present paper considers a cavity-ramp structure and calibrates the turbulence model parameters using a deep neural network (DNN) surrogate model and a genetic algorithm (GA). The non-intrusive polynomial chaos expansion method is used to quantify the uncertainty of the shear stress transport (SST) turbulence model parameters and determine the effects of these parameters on the wall pressure, allowing suitable feature identification parameters to be selected for the DNN turbulence surrogate model. The DNN is compared with the traditional polynomial chaos expansion method, and the results highlight the advantages of using the DNN method to construct the surrogate model. Finally, a GA is used to optimize and calibrate the SST turbulence model parameters based on the surrogate model and experimental data. Experimental results show that the DNN turbulence surrogate model is highly accurate, with the predicted wall pressure, achieving a coefficient of determination above 0.998. The DNN has higher precision, stronger feature extraction ability, and faster prediction times than the traditional polynomial chaos expansion method. The calibrated SST turbulence model produces wall pressures that are close to the experimental data, verifying the feasibility of the proposed method. It is expected that the approach proposed in this paper will improve the calculation accuracy of the SST turbulence model. [ABSTRACT FROM AUTHOR]

In order to solve the problem of untimely monitoring of tool wear status during laser-ultrasonic compound cutting (LUCC), which leads to the reduction of process accuracy and product quality damage, a method of tool wear status monitoring based on acoustic emission (AE) and deep learning is proposed in this paper. The AE signal is collected and analyzed in the frequency and time-frequency domains by using Fourier transform (FT) and wavelet packet decomposition (WPD), it is found that the AE signal energy is mainly concentrated in the 1st, 2nd, 3rd, and 4th frequency bands, and the energy of each frequency band in the signal increases gradually when the tool wear degree increases, however, the percentage of energy of each frequency band in the total energy shows different change trend. According to the amount of flank wear of the tool, the tool wear degree is divided into four tool wear states. The SVM model and BP neural network model were established based on MATLAB software to realize the tool wear state monitoring. The results show that the tool wear monitoring based on BP neural network is better than that of SVM for tool wear status monitoring. The model identification correct rate reaches 99 %, which is more suitable for the tool wear state monitoring designed in this paper. [ABSTRACT FROM AUTHOR]