Search

This paper explores the effects of various parameters on the triticale straw cutting process and the subsequent biomass yield. The impact of blade angle (α), rake angle (β), and the distance between the blade and counter-blade (g) were examined in relation to the shaft torque (T d) on the cutting knife drum, the energy consumption (E c), and the required power (P) for processing straw. Heterogeneity among straw samples was taken into account to ensure accurate calibration of responses. An analysis of variance (ANOVA) was employed to investigate the interactions between input variables and recorded responses, leading to the identification of optimal cutting parameters (α = 35° and β = 0°) that minimise T d , E c , and P. Additionally, the components of the recorded torque T d , including cutting torque (T c) and friction torque (T f), were analysed. Parameter f was used to ascertain the percentage of T f in T d , enabling an optimisation process that confirmed the experimental results and pinpointed the parameter values that resulted in the least energy-intensive process. • ANOVA analysis of influence of process settings on the cutting process results. • The knife blade angle has the most significant influence on energy consumption. • The distance between blade and counter-blade has less influence on energy consumption. • The share of friction torque in the cutting torque facilitated numerical optimisation. • Lower energy consumption of cutting improves energy balance of biofuel production. [ABSTRACT FROM AUTHOR]

Combined heat and power (CHP) plants fueled by biomass can collect and utilize waste straw resources in a productive way. This paper considers the impact of regional factors on biomass energy potential and the energy needs of the population, so as to study the differences in construction of biomass CHP plants and the collection scope of raw materials, and proposes evaluating suitability for biomass energy development based on scope of resource collection. Taking five counties in China as its study areas, this paper assesses biomass energy potential. A topology system of biomass CHP plants has been reasonably established in different counties through ArcGIS, the required installed capacity has been calculated according to the number of persons served by such plants. Finally, the collection length and corresponding value range of raw materials of CHP plants along roads has been obtained based on biomass energy potential and energy demand. The result shows that the differences in area, straw yield and biomass fuelization rate depending on regions have a great impact on biomass energy potential, while the residue-to-product ratio of straw and biomass calorific value have less of an impact. When the biomass energy per capita of a region reaches 9.75GJ/person, it is suitable for biomass energy development. The installed capacity in the biomass CHP plant system of each study area is mostly within the scope of 3–59 MW, and the collection length of corresponding biomass resources of such plants along roads is mostly within the scope of 5.09–25.23 km. • Assessment of biomass energy potential based on regional biomass differences. • Suitability for biomass energy development based on scope of resource collection. • Strategies for biomass plant system construction in different regions are proposed. [ABSTRACT FROM AUTHOR]

In the global effort to reduce CO 2 emissions, the concurrent enhancement of pollutant degradation and reductions in fossil fuel consumption are pivotal aspects of microalgae-mediated wastewater treatment. Clarifying the degradation mechanisms of bacteria and microalgae during pollutant treatment, as well as regulatory biolipid production, could enhance process sustainability. The synergistic and inhibitory relationships between microalgae and bacteria are introduced in this paper. The different stimulators that can regulate microalgal biolipid accumulation are also reviewed. Wastewater treatment technologies that utilize microalgae and bacteria in laboratories and open ponds are described to outline their application in treating heavy metal-containing wastewater, animal husbandry wastewater, pharmaceutical wastewater, and textile dye wastewater. Finally, the major requirements to scale up the cascade utilization of biomass and energy recovery are summarized to improve the development of biological wastewater treatment. [Display omitted] • The synergistic and antagonistic interactions between bacteria and microalgae are summarized. • Different stimulators that could regulate microalgal biolipid accumulation are also reviewed. • Wastewater treatment technologies that utilize microalgae and bacteria in the laboratory and open ponds are described. • The trends in microalgae-bacterial consortium in multistage energy production are proposed. [ABSTRACT FROM AUTHOR]