Search

This paper presents a novel sound event detection (SED) system for rare events occurring in an open environment. Wavelet multiresolution analysis (MRA) is used to decompose the input audio clip of 30 seconds into five levels. Wavelet denoising is then applied on the third and fifth levels of MRA to filter out the background. Significant transitions, which may represent the onset of a rare event, are then estimated in these two levels by combining the peak-finding algorithm with the K-medoids clustering algorithm. The small portions of one-second duration, called 'chunks' are cropped from the input audio signal corresponding to the estimated locations of the significant transitions. Features from these chunks are extracted by the wavelet scattering network (WSN) and are given as input to a support vector machine (SVM) classifier, which classifies them. The proposed SED framework produces an error rate comparable to the SED systems based on convolutional neural network (CNN) architecture. Also, the proposed algorithm is computationally efficient and lightweight as compared to deep learning models, as it has no learnable parameter. It requires only a single epoch of training, which is 5, 10, 200, and 600 times lesser than the models based on CNNs and deep neural networks (DNNs), CNN with long short-term memory (LSTM) network, convolutional recurrent neural network (CRNN), and CNN respectively. The proposed model neither requires concatenation with previous frames for anomaly detection nor any additional training data creation needed for other comparative deep learning models. It needs to check almost 360 times fewer chunks for the presence of rare events than the other baseline systems used for comparison in this paper. All these characteristics make the proposed system suitable for real-time applications on resource-limited devices. [ABSTRACT FROM AUTHOR]

Background: Dengue, Zika, and chikungunya, whose viruses are transmitted mainly by Aedes aegypti, significantly impact human health worldwide. Despite the recent development of promising vaccines against the dengue virus, controlling these arbovirus diseases still depends on mosquito surveillance and control. Nonetheless, several studies have shown that these measures are not sufficiently effective or ineffective. Identifying higher-risk areas in a municipality and directing control efforts towards them could improve it. One tool for this is the premise condition index (PCI); however, its measure requires visiting all buildings. We propose a novel approach capable of predicting the PCI based on facade street-level images, which we call PCINet. Methodology: Our study was conducted in Campinas, a one million-inhabitant city in São Paulo, Brazil. We surveyed 200 blocks, visited their buildings, and measured the three traditional PCI components (building and backyard conditions and shading), the facade conditions (taking pictures of them), and other characteristics. We trained a deep neural network with the pictures taken, creating a computational model that can predict buildings' conditions based on the view of their facades. We evaluated PCINet in a scenario emulating a real large-scale situation, where the model could be deployed to automatically monitor four regions of Campinas to identify risk areas. Principal findings: PCINet produced reasonable results in differentiating the facade condition into three levels, and it is a scalable strategy to triage large areas. The entire process can be automated through data collection from facade data sources and inferences through PCINet. The facade conditions correlated highly with the building and backyard conditions and reasonably well with shading and backyard conditions. The use of street-level images and PCINet could help to optimize Ae. aegypti surveillance and control, reducing the number of in-person visits necessary to identify buildings, blocks, and neighborhoods at higher risk from mosquito and arbovirus diseases. Author summary: The strategies to control Ae. aegypti require intensive work and considerable financial resources, are time-consuming, and are commonly affected by operational problems requiring urgent improvement. The PCI is a good tool for identifying higher-risk areas; however, its measure requires a high amount of human and material resources, and the aforementioned issues remain. In this paper, we propose a novel approach capable of predicting the PCI of buildings based on street-level images. This first work combines deep learning-based methods with street-level data to predict facade conditions. Considering the good results obtained with PCINet and the good correlations of facade conditions with PCI components, we could use this methodology to classify building conditions without visiting them physically. With this, we intend to overcome the high cost of identifying high-risk areas. Although we have a long road ahead, our results show that PCINet could help to optimize Ae. aegypti and arbovirus surveillance and control, reducing the number of in-person visits necessary to identify buildings or areas at risk. [ABSTRACT FROM AUTHOR]

Deep learning has achieved immense success in computer vision and has the potential to help physicians analyze visual content for disease and other abnormalities. However, the current state of deep learning is very much a black box, making medical professionals skeptical about integrating these methods into clinical practice. Several methods have been proposed to shed some light on these black boxes, but there is no consensus on the opinion of medical doctors that will consume these explanations. This paper presents a study asking medical professionals about their opinion of current state-of-the-art explainable artificial intelligence methods when applied to a gastrointestinal disease detection use case. We compare two different categories of explanation methods, intrinsic and extrinsic, and gauge their opinion of the current value of these explanations. The results indicate that intrinsic explanations are preferred and that physicians see value in the explanations. Based on the feedback collected in our study, future explanations of medical deep neural networks can be tailored to the needs and expectations of doctors. Hopefully, this will contribute to solving the issue of black box medical systems and lead to successful implementation of this powerful technology in the clinic. [ABSTRACT FROM AUTHOR]

Many different kind of fluids in a wide variety of industries exist, such as two-phase and three-phase. Various combinations of them can be expected and gas-oil-water is one of the most common flows. Measuring the volume fraction of phases without separation is vital in many aspects, one of which is financial issues. Many methods are utilized to ascertain the volumetric proportion of each phase. Sensors based on measuring capacity are so popular because this kind of sensor operates seamlessly and autonomously without necessitating any form of segregation or disruption for measuring in the process. Besides, at the present moment, Artificial intelligence (AI) can be nominated as the most useful tool in several fields, and metering is no exception. Also, three main type of regimes can be found which are annular, stratified, and homogeneous. In this paper, volume fractions in a gas-oil-water three-phase homogeneous regime are measured. To accomplish this objective, an Artificial Neural Network (ANN) and a capacitance-based sensor are utilized. To train the presented network, an optimized sensor was implemented in the COMSOL Multiphysics software and after doing a lot of simulations, 231 different data are produced. Among all obtained results, 70 percent of them (161 data) are awarded to the train data, and the rest of them (70 data) are considered for the test data. This investigation proposes a new intelligent metering system based on the Multilayer Perceptron network (MLP) that can estimate a three-phase water-oil-gas fluid's water volume fraction precisely with a very low error. The obtained Mean Absolute Error (MAE) is equal to 1.66. This dedicates the presented predicting method's considerable accuracy. Moreover, this study was confined to homogeneous regime and cannot measure void fractions of other fluid types and this can be considered for future works. Besides, temperature and pressure changes which highly temper relative permittivity and density of the liquid inside the pipe can be considered for another future idea. [ABSTRACT FROM AUTHOR]

The recognition of food images is of great significance for nutrition monitoring, food retrieval and food recommendation. However, the accuracy of recognition had not been high enough due to the complex background of food images and the characteristics of small inter-class differences and large intra-class differences. To solve these problems, this paper proposed a food image recognition method based on transfer learning and ensemble learning. Firstly, generic image features were extracted by using the convolutional neural network models (VGG19, ResNet50, MobileNet V2, AlexNet) pre-trained on the ImageNet dataset. Secondly, the 4 pre-trained models were transferred to the food image dataset for model fine-tuning. Finally, different basic learner combination strategies were adopted to establish the ensemble model and classify feature information. In this paper, several kinds of experiments were performed to compare the results of food image recognition between single models and ensemble models on food-11 dataset. The experimental results demonstrated that the accuracy of the ensemble model was the highest, reaching 96.88%, which was superior to any base learner. Therefore, the convolutional neural network model based on transfer learning and ensemble learning has strong learning ability and generalization ability, and it is feasible and practical to apply the method to food image recognition. [ABSTRACT FROM AUTHOR]

Based on the integrated model of Super-SBM model, spatial Durbin model (SDM) and Grey neural network model, this paper analyzes the panel data of various provinces in China from multiple angles and dimensions. It was found that there were significant differences in eco-efficiency between organic rice production and conventional rice production. The response of organic rice to climate change, the spatial distribution of ecological and economic benefits and the impact on carbon emission were analyzed. The results showed that organic rice planting not only had higher economic benefits, but also showed a rising trend of ecological benefits and a positive feedback effect. This finding highlights the importance of organic rice farming in reducing carbon emissions. Organic rice farming effectively reduces greenhouse gas emissions, especially carbon dioxide and methane, by improving soil management and reducing the use of fertilizers and pesticides. This has important implications for mitigating climate change and promoting soil health and biodiversity. With the acceleration of urbanization, the increase of organic rice planting area shows the trend of organic rice gradually replacing traditional rice cultivation, further highlighting the potential of organic agriculture in emission reduction, environmental protection and sustainable agricultural production. To this end, it is recommended that the Government implement a diversified support strategy to encourage technological innovation, provide guidance and training, and raise public awareness and demand for organic products. At the same time, private sector participation is stimulated to support the development of organic rice cultivation through a public-private partnership model. Through these measures, further promote organic rice cultivation, achieve the dual goals of economic benefits and environmental benefits, and effectively promote the realization of double carbon emission reduction targets. [ABSTRACT FROM AUTHOR]

Network traffic prediction is an important network monitoring method, which is widely used in network resource optimization and anomaly detection. However, with the increasing scale of networks and the rapid development of 5-th generation mobile networks (5G), traditional traffic forecasting methods are no longer applicable. To solve this problem, this paper applies Long Short-Term Memory (LSTM) network, data augmentation, clustering algorithm, model compression, and other technologies, and proposes a Cluster-based Lightweight PREdiction Model (CLPREM), a method for real-time traffic prediction of 5G mobile networks. We have designed unique data processing and classification methods to make CLPREM more robust than traditional neural network models. To demonstrate the effectiveness of the method, we designed and conducted experiments in a variety of settings. Experimental results confirm that CLPREM can obtain higher accuracy than traditional prediction schemes with less time cost. To address the occasional anomaly prediction issue in CLPREM, we propose a preprocessing method that minimally impacts time overhead. This approach not only enhances the accuracy of CLPREM but also effectively resolves the real-time traffic prediction challenge in 5G mobile networks. [ABSTRACT FROM AUTHOR]

Click-through rate (CTR) prediction is a term used to predict the probability of a user clicking on an ad or item and has become a popular research area in advertising. As the volume of Internet data increases, the labor costs of traditional feature engineering continue to rise. To reduce the dependence on feature interactions, this paper proposes a fusion model that combines explicit and implicit feature interactions, called the Two-Tower Multi-Head Attention Neural Network (TMH) approach. The model integrates multiple components such as multi-head attention, residual network, and deep neural networks into an end-to-end model that automatically obtains vector-level combinations of explicit and implicit features to predict click-through rates through higher-order explicit and implicit interactions. We evaluated the effectiveness of TMH in CTR prediction through numerous experiments using three real datasets. The results demonstrate that our proposed method not only outperforms existing prediction methods but also offers good interpretability. [ABSTRACT FROM AUTHOR]

Banking and stock markets consider gold to be an important component of their economic and financial status. There are various factors that influence the gold price trend and its fluctuations. Accurate and reliable prediction of the gold price is an essential part of financial and portfolio management. Moreover, it could provide insights about potential buy and sell points in order to prevent financial damages and reduce the risk of investment. In this paper, different architectures of deep neural network (DNN) have been proposed based on long short-term memory (LSTM) and convolutional-based neural networks (CNN) as a hybrid model, along with automatic parameter tuning to increase the accuracy, coefficient of determination, of the forecasting results. An illustrative dataset from the closing gold prices for 44 years, from 1978 to 2021, is provided to demonstrate the effectiveness and feasibility of this method. The grid search technique finds the optimal set of DNNs' parameters. Furthermore, to assess the efficiency of DNN models, three statistical indices of RMSE, RMAE, and coefficient of determination (R2), were calculated for the test set. Results indicate that the proposed hybrid model (CNN-Bi-LSTM) outperforms other models in total bias, capturing extreme values and obtaining promising results. In this model, CNN is used to extract features of input dataset. Furthermore, Bi-LSTM uses CNN's outputs to predict the daily closing gold price. [ABSTRACT FROM AUTHOR]

Coal pillar retention plays a crucial role in ensuring safety and minimizing ground deformation in coal mining operations. However, accurately and efficiently determining the optimal size of protective pillars, reducing coal pillar pressure, and addressing challenges such as limited access to retention parameters, lengthy observation times, and high labor costs are challenges that must be addressed. In this paper, we presented a methodology using Huainan mine as a case study to address these challenges. The solution involves deriving the formula for coal pillar retention parameters based on the Three Regulations definition and requirements. The total least squares algorithm was integrated with surface observation station data and the MATLAB software platform to automate the coal pillar retention solution. Furthermore, a linear regression model of coal pillar retention-related parameters was established using the geological mining condition data. The proposed ELM neural network model was optimized using a genetic algorithm and combined with the linear regression model to establish a predictive model. The results demonstrated that the proposed machine learning algorithm attains the requisite level of accuracy for industrial production. [ABSTRACT FROM AUTHOR]

Long short-term memory (LSTM) has been effectively used to represent sequential data in recent years. However, LSTM still struggles with capturing the long-term temporal dependencies. In this paper, we propose an hourglass-shaped LSTM that is able to capture long-term temporal correlations by reducing the feature resolutions without data loss. We have used skip connections in non-adjacent layers to avoid gradient decay. In addition, an attention process is incorporated into skip connections to emphasize the essential spectral features and spectral regions. The proposed LSTM model is applied to speech enhancement and recognition applications. The proposed LSTM model uses no future information, resulting in a causal system suitable for real-time processing. The combined spectral feature sets are used to train the LSTM model for improved performance. Using the proposed model, the ideal ratio mask (IRM) is estimated as a training objective. The experimental evaluations using short-time objective intelligibility (STOI) and perceptual evaluation of speech quality (PESQ) have demonstrated that the proposed model with robust feature representation obtained higher speech intelligibility and perceptual quality. With the TIMIT, LibriSpeech, and VoiceBank datasets, the proposed model improved STOI by 16.21%, 16.41%, and 18.33% over noisy speech, whereas PESQ is improved by 31.1%, 32.9%, and 32%. In seen and unseen noisy situations, the proposed model outperformed existing deep neural networks (DNNs), including baseline LSTM, feedforward neural network (FDNN), convolutional neural network (CNN), and generative adversarial network (GAN). With the Kaldi toolkit for automated speech recognition (ASR), the proposed model significantly reduced the word error rates (WERs) and reached an average WER of 15.13% in noisy backgrounds. [ABSTRACT FROM AUTHOR]