Search

Wireless power transfer (WPT) technology can completely isolate the equipment from the power supply, and has been widely used. However, the transmission efficiency of WPT system is optimal only as the transmitting coil was completely aligned with the receiving coil. But in practical applications, the mobile devices are all dynamic system, and perfectly alignment of the coils is a very demanding condition. In order to solve this problem, the paper proposed a coil position adaptive adjustment control scheme of WPT system with lateral misalignment or angular misalignment. Firstly, the relationship between transmission efficiency and lateral misalignment and angular misalignment was analyzed. And the research results show that if there is a lateral misalignment between the coils, the transmission efficiency can be optimized by adjusting the angular misalignment. Secondly, based on the hill climbing algorithm, a coil position adaptive adjustment control method was proposed. Finally, a coil position adaptive adjustment WPT system experimental platform was built, and the experimental researches are carried on. The results of the experiment show that as the transfer distance is 0.10 m and the lateral misalignment is 0.12 m, the transfer efficiency can be increased from 38.38% to 55.61% through the proposed control scheme. And the results verify the feasibility and effectiveness of control scheme proposed in the paper. © 2024 Institute of Electrical Engineers of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Switching power supply is widely used in industrial equipment, household appliances, and other fields due to the advantages of high integration and lightweight. Voltage sags can seriously affect the output voltage of switching power supply and the working condition of its power supply equipment; at the same time, the working scenarios of power equipment using switching power supply often have different level of harmonic problems. Considering the continuous innovation of switching power supply technology, the previous analysis and test results on the effect of voltage sags and harmonics on switching power supplies may no longer be applicable. The paper reveals the mechanism of the effect of harmonic alone as well as voltage sag superimposed harmonics on the output voltage of the switching power supply. Then the test research program was developed, and four different brands switching power supplies were selected for the test research, with which the effects of different amplitude voltage sags, harmonics with different frequencies and distortion, as well as voltage sag superimposed harmonics on the output voltage of switching power supplies were investigated. The results show that the tolerance ability of switching power supplies to voltage sags has been improved compared with previous switching power supplies, and the harmonic itself has less effect on the output voltage of switching power supply, but the joint action of harmonics and voltage sags will have a greater effect on the output voltage of switching power supply. © 2024 Institute of Electrical Engineers of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

In response to increasing power supply needs, maintaining stable substations is vital for reliable electricity. Traditional manual equipment inspections in these substations are inefficient and risky, often leading to hazards and delayed detection of faults. Therefore, there's a growing shift towards using intelligent image recognition technology in video surveillance systems for safer and more efficient inspections. This paper focuses on enhancing the level of intelligent inspection in substations using artificial intelligence‐based visual recognition technology. It introduces a novel small‐sample classification algorithm based on the CLIP architecture. This method uses cross‐modal equipment status information as additional training samples, optimizing the loss function together with image samples, and devises hand‐crafted strategies for text sample inputs to distinguish between equipment and states. The experimental results show that with only 16 training samples per category for 21 types of electrical equipment states, our method achieved a maximum accuracy of 93.38%. This represents a 2.98% higher accuracy than the PPLCNet trained on the full dataset and an 8.63% higher accuracy than the PPLCNet trained with an equal number of samples, with significantly reduced training time. © 2024 Institute of Electrical Engineers of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

Electricity, as a sustainable energy carrier, plays a central role in the transition scenarios for carbon neutralization of energy systems. Expanding the potential of electricity requires intelligent integration of electricity infrastructures and electricity markets with distributed energy resources (DERs) including roof‐top solar photovoltaics (PVs), controllable loads, and storage batteries. This integration will advance the management of power distribution grids, resulting in harmonization of the distribution grids and variable renewable generation. In the foreseeable future, the DERs will be actively used to perform advanced management of power distribution grids and compensate fluctuation in variable renewable power generation such as PVs and wind power. Market‐based coordination mechanisms are already practiced in large‐scale electricity production, electricity trading and transmission around the world. Using these mechanisms at the distribution grid level to integrate numerous flexible devices into the grids remains an important research topic. This paper reviews the role of DER integration toward carbon‐neutral power systems, the state‐of‐art and challenges associated with market‐based approaches for integrating flexible demand, distributed generation, and storage. Methods for assessing the value of DER aggregation such as virtual power plants and microgrids are also explored. © 2024 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

This paper proposes a control method for step voltage regulators (SVRs) to avoid voltage violations in distribution systems with unbalanced voltages due to photovoltaic (PV) generation and electric vehicle (EV) charging. Distribution system operators must effectively address voltage problems resulting from the widespread installation of distributed energy resources under the optimizing the utilization of existing voltage regulators to establish an efficient and rational infrastructure. Therefore, this study focused on advancements in voltage control using SVR based on line‐drop compensator (LDC) control, which is widely used in actual operations. We propose a method that utilizes voltage data from information technology switches to detect and address voltage unbalances in the control section, allowing for the sequential adjustment of the monitoring target in LDC control to maintain appropriate voltage limits under unbalanced conditions. We conducted power flow calculations using a distribution system model that represents an actual distribution system in the Hokuriku area. The effectiveness of the proposed method was evaluated in terms of its impact on PV and EV hosting capacity, as well as the frequency of tap operations. © 2023 The Authors. IEEJ Transactions on Electrical and Electronic Engineering published by Institute of Electrical Engineer of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]