Search

The train generates regenerative braking energy (RBE) during braking. When the RBE generated by the braking train is too large to be absorbed and utilized, the OCS voltage will rise rapidly. It may even exceed the rated voltage threshold, resulting in hidden dangers for driving safety. How to use RBE efficiently and reasonably has become a hot issue in recent years. This paper presents a metro timetable optimization method for multi-train operation to improve the RBE utilization efficiency of trains. Firstly, an energy-saving multi-objective model for multi-train operation is established, which takes the total energy consumption and travel time as the objective functions and the dwell time and departure interval as the constraints. Then, the genetic algorithm (GA) is used to generate the composition sequence of dwell time and departure interval, and the multi-node nonlinear model is used to calculate the total energy consumption of the metro line. Finally, Guangzhou metro line 7 is selected as an example to illustrate the effectiveness of the developed optimization model. The results show that the energy consumption of the whole line can be effectively reduced by adjusting the dwell time and departure interval. Meanwhile, the timetable optimization model with GA has better energy-saving effects by comparative analysis. • A metro timetable optimization method based on improved genetic algorithm is developed. • The multi-node nonlinear model is developed to calculate the total energy consumption. • The developed optimization model has better energy-saving effects than previous methods. [ABSTRACT FROM AUTHOR]

The energy crisis caused by climate change is the most significant challenge of the 21st century. Single-objective and multi-objective optimization studies for buildings often only consider the building itself, without considering the impacts of climate change. However, in the future, energy-efficient design and appropriate operating parameters will be crucial considerations in the face of global climate change. This paper aims to discuss the impact of climate change in the humid-hot region over the past 60 years on the energy consumption of office buildings and propose countermeasures. Firstly, the meteorological data of Guangzhou from 1960 to 2020 is statistically analyzed, and four typical meteorological years and corresponding air conditioning design days are established. Secondly, Energyplus is used to simulate the building's energy consumption, and the energy consumption factors are analyzed for sensitivity using jEplus. Finally, a multi-objective optimization is performed using jEPlus + EA with the Non-dominated Sorting Genetic Algorithm (NSGA-II). The results found that climate change led to a significant increase in the duration of high outdoor temperatures during summer. Specifically, the daily dry-bulb temperature for air conditioning design increased by 0.4–0.7 °C, and due to climate change, the energy consumption of the office building increased by about 4.6 %. The main factor affecting the cooling energy consumption in summer was the indoor cooling set point (8.29%–30%), infiltration air volume (1.0%–8.6%), fresh air volume (3.2%–16.06%), the glazing solar transmission rate (1.25%–9.0%), building orientation (0%–1.43%), and relatively small influence of envelope insulation performance. The operation scheme determined by multi-objective optimization can reduce the cooling energy consumption of the building by 10.6%–16.8%, which can mitigate the rise in energy consumption resulting from climate change to a greater extent. [Display omitted] • Discuss the impact of climate change over the past 60 years on the energy consumption of office buildings. • There was a significant increase in the duration of high outdoor temperatures during the summer. • Multi-objective optimization is performed using jEPlus + EA. • Climate change caused energy consumption to increase by about 4.6 %. • Optimal solutions can reduce the cooling energy consumption of the building by 10.6%–16.8%. [ABSTRACT FROM AUTHOR]