Search

Before the COVID-19 pandemic, ventilation in buildings was not always given its due importance. The World Health Organization has highlighted the important role of air exchange with the outdoors in improving the air quality in buildings; buildings should, therefore, be equipped with mechanical ventilation or adequate air conditioning systems. This paper aims to investigate different retrofit solutions for air conditioning, evaluating them in terms of energy consumption and cost and the impact of increased outdoor air exchange rates on countering the propagation of COVID-19; the latter is the main novelty of the paper. As a case study, we take an existing office building located in Central Italy that was previously not equipped with a mechanical ventilation system (a system with primary air was introduced during the study). The energy analysis was conducted using dynamic simulation software after validation through energy bills; energy and economic analyses were conducted considering different external-air exchange rates. An optimal number of outdoor air changes was found to mitigate the risk of COVID-19 infection, a finding in line with the international literature. The increase in air changes with outdoor air leads to a rise in energy consumption and costs. These values were evaluated for different air conditioning systems and operational schedules. These drawbacks can be made less significant by combining interventions in the system with energy-efficiency measures applied to the building envelope. [ABSTRACT FROM AUTHOR]

The integration of renewable energy systems in buildings leads to a reduction in energy bills for end users and a reduction in the carbon footprint of such buildings, usually referred to as prosumers. In addition, the installation of charging points for the electric vehicles of people working or living in these buildings can further improve the energy efficiency of the whole system if innovative technologies, such as vehicle-to-building (V2B) technologies, are implemented. The aim of this paper is to present an Energy Management System (EMS) based on mathematical programming that has been developed to optimally manage a prosumer building equipped with photovoltaics, a micro wind turbine and several charging points for electric vehicles. Capabilities curves of renewable power plant inverters are modelled within the EMS, as well as the possibility to apply power curtailment and V2B. The use of V2B technology reduces the amount of electricity purchased from the public grid, while the use of smart inverters for the power plants allows zero reactive power to be drawn from the grid. Levelized cost of electricity (LCOE) is used to quantify curtailment costs, while penalties on reactive power absorption from the distribution network are evaluated in accordance with the current regulatory framework. Specifically, the model is applied to a prosumer building owned by the postal service in a large city in Italy. The paper reports the main results of the study and proposes a sensitivity analysis on the number of charging stations and vehicles, as well as on the consideration of different typical days characterized by different load and generation profiles. This paper also investigates how errors in forecasting energy production from renewable sources impact the optimal operation of the whole system. [ABSTRACT FROM AUTHOR]

The use of biomass can be a strategic way to realize a carbon-neutral energy plan, ensuring a fuel feedstock. Residual biomass arising from pruning is demonstrated to be an important energy resource in terms of quantity and quality. In the Salento peninsula, Apulia Region, in the south of Italy, a dramatic outbreak of Xylella fastidiosa has decimated olive trees since 2013, gaining a considerable amount of wood biomass. This paper, starting from the need to find a way to optimize the use of this available stock, reviews the main technologies on the utilization of olive wood for energy purposes. In particular, processes and products are here described, and an energy analysis compares lower heating value (LHV), higher heating value (HHV), mass yield, process operating conditions, and energy generated and spent by the process in order to find the most effective technology in order to optimize the energy use of olive biomass. The conclusions show the advantages and disadvantages of each technology. Pyrolysis performs well, showing the best results for both char HHV and syngas yield under different operating conditions. Gasification seems to be the most appropriate among conversion technologies to optimize olive tree pruning for energy purposes, as it can be used to produce both electrical and thermal energy. In terms of economic valorization, char is the most promising material representing a value-added product, the quality and versatility of which ranges from fuel to soil improvers and additives for the construction of supercapacitors. Conversely, its disadvantages are mainly represented by high ash content, which can slightly decrease the boiler efficiency. Finally, the amount of alkali metals can produce several problems, such as fouling, slagging, corrosion, etc., posing a challenge for combustion control and pollutant minimization. [ABSTRACT FROM AUTHOR]

The building and construction sector has a significant impact on the CO2 emissions and pollutants released into the atmosphere, which contribute to climate change. The EPDB Directive mandates the achievement of minimum energy class E for all residential buildings by 2030 and energy class D by 2033. Particularly, in Italy, about 86% of the existing building stock predates the enactment of any energy laws or regulations, making it imperative to apply the energy efficiency interventions. This paper provides a support decision tool for the identification of the standardized interventions in the building envelope, the air conditioning system, and domestic hot water production. This study is focused on a specific construction period class (1976–1990) in six different climatic zones. The methodological approach is based on a cataloguing phase and the definition of ante operam energy classes as well as on case study identification, energy requalification intervention identification, solution simulations, and cost estimation. By simulating the standardized interventions for each climatic zone, a range of possible combinations is identified. The most advantageous ones are determined based on a cost–benefit analysis considering the potential class jump achieved. The research result is a matrix of energy efficiency interventions that is applicable to each climatic zone and can be extended to the existing housing stock. [ABSTRACT FROM AUTHOR]

In the current context of joint efforts towards the decarbonisation of buildings, integrating occupants' comfort and health with latest technological advancements for energy efficiency is at the center of the latest development of research, policies and professional practice. Radiant systems are encountering great success since the low-thickness systems can also be used in renovation projects for both heating and cooling, while guaranteeing optimal comfort. However, dehumidification is often required for optimal radiant cooling operation with no condensation risks, and the great potential of mechanical ventilation systems to optimally address the needs for dehumidification, air renewal, health and energy efficiency appears to be far from its full exploitation in the post-COVID-19 era. The present paper aims at providing a quantification of the energy and financial impacts of the implementation of a controlled mechanical ventilation system (CMV) coupled to a radiant system in a typical residential case study building in Italy. The results show that the sole CMV may decrease primary energy demand and energy costs by more than 30% and contribute to an increase in the smart readiness of the building by 8%, but further incentive policies must be developed to cover the still high investment and maintenance cost. [ABSTRACT FROM AUTHOR]

As the urgency to mitigate climate change intensifies, the achievement of zero carbon targets in the built environment has become a critical objective. Building retrofitting plays a vital role in reducing energy consumption and carbon emissions in existing buildings. This paper presents an approach that combines Building Information Modeling (BIM) with multiple domains to strive for zero carbon targets in building retrofit projects. The proposed approach is based on a dynamic multi-parameter analysis that integrates indoor comfort, energy savings, CO2eq reduction, and the social cost of carbon while considering investment costs. Renewable energy technologies, such as photovoltaic panels and solar thermal systems, are emphasized to achieve the desired zero-carbon outcomes. Real-time monitoring mechanisms enable continuous performance evaluation and adaptive retrofit strategies for further energy savings. This approach is validated through a case study of an existing thermal bath building, known as "Terme Lucane", located in southern Italy. The results of the study demonstrate significant reductions in energy consumption and carbon emissions, highlighting the potential of the proposed approach to achieve zero carbon targets through the integration of multi-data BIM implementation. These findings offer a promising pathway for building retrofit projects aiming for zero carbon targets through multi-data BIM modeling. [ABSTRACT FROM AUTHOR]

The Renovation Wave for Europe highlighted the role of the public building stock for which Directive 2012/27/EU has set an annual renewal rate of 3%, which should rise to reach the goal of decarbonization by 2050. In this paper, the energy retrofit of an educational building—at the academic level—in Southern Italy was investigated. The aim was to evaluate the incentive share, which could accelerate the energy efficiency process, to achieve a cost-effective nZEB. The results show that the highest incentive rate is required for interventions on the opaque building envelope, which are also those that allow the least energy savings. An incentive rate of about 45% for the energy efficiency of the transparent envelope is necessary to reduce the payback time by about 7 years. The efficiency of the plants and the installation of a PV system are energetically and economically convenient even without forms of economic incentive. Finally, if the building is brought to high energy standards—a primary energy saving of 46% and energy class A3—an incentive rate of 40% is required to repay the intervention in about 10 years. [ABSTRACT FROM AUTHOR]

Increasing interest in natural gas-fired gensets is motivated by District Heating (DH) network applications, especially in urban areas. Even if they represent customary solutions, when used in DH, duty regimes are driven by network thermal energy demands resulting in discontinuous operation, which affects their remaining useful life. As such, the attention on effective condition-based maintenance has gained momentum. In this paper, a novel unsupervised anomaly detection framework is proposed for gensets in DH networks based on Supervisory Control And Data Acquisition (SCADA) data. The framework relies on multivariate Machine-Learning (ML) regression models trained with a Leave-One-Out Cross-Validation method. Model residuals generated during the testing phase are then post-processed with a sliding threshold approach based on a rolling average. This methodology is tested against nine major failures that occurred on the gas genset installed in the Aosta DH plant in Italy. The results show that the proposed framework successfully detects anomalies and anticipates SCADA alarms related to unscheduled downtime. [ABSTRACT FROM AUTHOR]

Green hydrogen exploitation plays a crucial role in achieving carbon neutrality by 2050. Hydrogen, in fact, provides a number of key benefits for the energy system, due to its integrability with other clean technologies for energy production and consumption. This paper is aimed at presenting the project of recovery of an abandoned industrial area located in central Italy by developing a site for the production of green hydrogen. To this aim, the analysis of the territorial and industrial context of the area allowed us to design the project phases and to define the sizing criteria of the hydrogen production plant. The results of a preliminary cost–benefit analysis show that a huge initial investment is required and that, in the short term, the project is sustainable only with a very large public grant. On the other hand, in the long term, the project is sustainable, and the benefits significantly overcome the costs. [ABSTRACT FROM AUTHOR]

Market-based instruments such as white certificates offer the potential to increase efficiency gains, reduce primary energy consumption and make energy systems more resilient. The purpose of this paper is to provide insights into the white certificate scheme through a case study analysis. In light of increasing decarbonization and energy efficiency targets, it is important to rethink the role that policy instruments play in the energy transition, including the energy efficiency obligation schemes within which white certificate schemes fall. We focus on Italy's white certificate scheme because it is among the longest-lived and has achieved notable results. The scheme is characterized by annually increasing energy savings targets, flexibility, the opportunity to include many interventions, and the role of energy services companies. We provide evidence based on an empirical survey and fill the research gap left by the latest updates to the scheme along with an appraisal of those updates, which covers prominent scheme innovations such as its stability mechanism. Our research can serve as a baseline for policymakers in designing white certificate schemes in countries with little related previous experience and provide useful information from countries where similar schemes have been implemented to fine-tune similar market-based mechanisms to improve energy efficiency. [ABSTRACT FROM AUTHOR]

This paper deals with the power conversion system architectures to interface a stationary electrochemical storage installation with the network. Theoretical justifications about the conversion system layouts and control, used for actual Italian installations, are given. This paper aims at giving the power energy society an overview of actual possibilities of static conversion of d.c. battery sources. [ABSTRACT FROM AUTHOR]

This paper contributes to the climate policy discussion by focusing on the challenges and opportunities of reaching net zero emissions by 2050 in Italy. To support Italian energy planning, we developed energy roadmaps towards national climate neutrality, consistent with the Paris Agreement objectives and the IPCC goal of limiting the increase in global surface temperature to 1.5 °C. Starting from the Italian framework, these scenarios identify the correlations among the main pillars for the change of the energy paradigm towards net emissions by 2050. The energy scenarios were developed using TIMES-RSE, a partial equilibrium and technology-rich optimization model of the entire Italian energy system. Subsequently, an in-depth analysis was developed with the sMTISIM, a long-term simulator of power system and electricity markets. The results show that, to achieve climate neutrality by 2050, the Italian energy system will have to experience profound transformations on multiple and strongly related dimensions. A predominantly renewable-based energy mix (at least 80–90% by 2050) is essential to decarbonize most of the final energy consumption. However, the strong increase of non-programmable renewable sources requires particular attention to new flexibility resources needed for the power system, such as Power-to-X. The green fuels produced from renewables via Power-to-X will be a vital energy source for those sectors where electrification faces technical and economic barriers. The paper's findings also confirm that the European "energy efficiency first" principle represents the very first step on the road to climate neutrality. [ABSTRACT FROM AUTHOR]

The last ten years have witnessed an increase in publications focusing on bioeconomy as a proposal to confront the global challenges of climate change, depletion of non-renewable resources and ecosystem degradation. This paper investigates the scientific literature on issues related agricultural bioeconomy by applying a bibliometric network analysis. Bibliometric analysis is applied to the publications of the Scopus database during the period 2010–2020 in order to provide an overview of the main aspects that characterize agricultural bioeconomy. The results showed that out of a total of 1100 scientific papers, only 2.45% were published in 2010, while the corresponding share in 2020 was 20.81%. In the five years of 2016–2020, cumulatively, 70.63% of the publications were made, showing the dynamic evolution of bioeconomy. In addition, out of 85 countries in total, Germany and Italy are the two countries with most publications, while the fragmentation of research is evident with the creation of two main nodes, the European and the American. Moreover, keyword analysis showed that biomass and sustainability are two main recurring concepts, confirming that, currently, bioeconomy operates at three different levels: energy demand, land demand, and governance. It is apparent that to boost the development of agricultural bioeconomy, the following aspects should be assessed: the effective use of resources, an understanding of the key drivers of agricultural bioeconomy, and a clear perception of their associations. There is still no consensus as to which are the key factors that will accelerate its sustainable development. Our pursuit is to use the tools of bibliometric analysis to reach more critical conclusions regarding the agricultural bioeconomy, rather than approach it in a static way. [ABSTRACT FROM AUTHOR]

Improving energy efficiency in public buildings is one of the main challenges for a sustainable requalification of energy issues and a consequent reduction of greenhouse gas (GHG) emissions. This paper aims to provide preliminary information about economic costs and energy consumption reductions (benefits) of some considered interventions in existing public buildings. Methods include an analysis of some feasible interventions in four selected public buildings. Energy efficiency improvements have been assessed for each feasible intervention. The difference of the building global energy performance index (EPgl) has been assessed before and after each intervention. Economic costs of each intervention have been estimated by averaging the amount demanded by different companies for the same intervention. Results obtained show economic costs and the EPgl percentage improvement for each intervention, highlighting and allowing for the comparison of energy consumption reduction and relative economic costs. The research results come from data gathered from four public buildings, and as such they could not be used to generically identify cost-beneficial energy efficiency interventions for every context or building type. However, the data reveals useful cost based considerations for selecting energy efficiency interventions in other public buildings. [ABSTRACT FROM AUTHOR]

The current paper contributes to the literature on community renewable energy by considering two projects developed in the north-west of Italy, in the Piedmont region. Community renewable energy is increasingly regarded by academic literature and policy discourse as crucial to ensure a socially and environmentally just energy transition. In spite of the growing diffusion of community renewable energy projects, there is still a lack of theoretically informed analyses. Our article tries to address this gap by combining two theoretical perspectives: the multilevel perspective and the socio-technical imaginaries approach. Applying the first perspective helps reconstruct the context and circumstances that have permitted the Piedmont's energy community projects to emerge. Particular attention is given to the windows of opportunity created by the Regional Law 12/2018, which acknowledged the establishment of energy communities for the first time in Italy. The socio-technical imaginaries perspective allows the identification of collective ideas and meanings that emerge when individuals or groups promote a socio-technical innovation. Based on this analysis, three main future changes are associated with community renewable energy: an integral ecology approach, a stronger sense of community, and a local development opportunity for rural areas characterised by depopulation, a low employment rate, and high energy demand. [ABSTRACT FROM AUTHOR]

The sustainable agriculture cultivation in greenhouses is constantly evolving thanks to new technologies and methodologies able to improve the crop yield and to solve the common concerns which occur in protected environments. In this paper, an MPC-based control system has been realized in order to control the indoor air temperature in a high efficiency greenhouse. The main objective is to determine the optimal control signals related to the water mass flow rate supplied by a heat pump. The MPC model allows a predefined temperature profile to be tracked with an energy saving approach. The MPC has been implemented as a multiobjective optimization model that takes into account the dynamic behavior of the greenhouse in terms of energy and mass balances. The energy supply is provided by a ground coupled heat pump (GCHP) and by the solar radiation while the energy losses related to heat transfers across the glazed envelope. The proposed MPC method was applied in a smart innovative greenhouse located in Italy, and its performances were compared with a traditional reactive control method in terms of deviation of the indoor temperature in respect to the desired one and in terms of electric power consumption. The results demonstrated that, for a time horizon of 20 h, in a greenhouse with dimensions 15.3 and 9.9 m and an average height of 4.5 m, the proposed MPC approach saved about 30% in electric power compared with a relay control, guaranteeing a consistent and reliable temperature profile in respect to the predefined tracked one. [ABSTRACT FROM AUTHOR]

The management of the distribution network is becoming increasingly important as the penetration of distributed energy resources is increasing. Reliable knowledge of the real-time status of the network is essential if algorithms are to be used to help distribution system operators define network configurations. State Estimation (SE) algorithms are capable of producing such an accurate snapshot of the network state but, in turn, require a wide range of information, e.g., network topology, real-time measurement and power profiles from customers/productions. Those profiles which may, in principle, be provided by smart meters are not always available due to technical limitations of existing Advanced Metering Infrastructure (AMI) in terms of communication, storage and computing power. That means that power profiles are only available for a subset of customers. The paper proposes an approach that can overcome these limitations: the remaining profiles, required by SE algorithms, are generated on the basis of customer-related information, identifying clusters of customers with similar features, such as the same contract and pattern of energy consumption. For each cluster, a power profile estimator is generated using long-term power profiles of a limited sub-set of customers, randomly selected from the cluster itself. The synthesized full power profile, representing each customer of the distribution network, is then obtained by scaling the power profile estimator of the cluster to which the customer belongs, by the monthly energy exchanged by that customer, data that are easily available. The feasibility of the proposed approach was validated considering the distribution grid of Unareti SpA, an Italian Distribution System Operator (DSO), operating in northern Italy and serving approximately one million customers. The application of the proposed approach to the actual infrastructure shows some limitations in terms of the accuracy of the estimation of the power profile of the customer. In particular, the proposed methodology is not fully able to properly represent clusters composed of customers with a large variability in terms of power exchange with the distribution network. In any case, the root mean square error of the synthesized full power profile with the respect to validation power profiles belonging to the same cluster is, in the worst case, on the order of 6.3%, while in the rest of cases is well below 5%. Thus, the proposed approach represents a good compromise between accuracy in representing the behavior of customers on the network and resources (in terms of computational power, data storage and communication resources) to achieve that results. [ABSTRACT FROM AUTHOR]

Despite the high energy consumption of wine making processes, little efforts have been spent so far, both at the industrial and scientific level, to search for alternative energy systems in wine cellars. In fact, almost all the existing cellars take electricity from the grid and burn natural gas or other fossil fuels to fulfil their energy demands. This paper analyses the energy demands of a real Prosecco wine cellar in the North East of Italy, which can be considered as a "reference" cellar for dimensions and wine production. The goal is to find the best energy conversion system in terms of maximum profits, efficiency and share of renewable energy utilization. Four alternative design configurations are proposed, and each one optimized considering the three objectives. Results show that a 35% gain in the maximum profits is obtained by including a natural gas fueled CHP internal combustion engine and an absorption chiller. This configuration is also the best one to achieve the maximum efficiency (61%), resulting in 18% reduction of primary energy consumption. Conversely, the utilization of a biomass boiler and an absorption chiller allows maximizing the share of renewable energy consumption, which is about 35% considering the existing availability of biomass from pruning harvesting and the relative limited surface available for photovoltaic generation. This option may become economically interesting when the price of natural gas increases of at least 50%. [ABSTRACT FROM AUTHOR]

Renewable energy sources are environmentally friendly and cost-efficient. However, the problem with these renewable resources is their heavy reliance on weather conditions. Thus, at times, these solutions are not guaranteed to meet the required demand all the time. For this, hybrid microgrids are introduced, which have a combination of both renewable energy sources and non-renewable energy resources. In this paper, a cost-efficient optimization algorithm is proposed that minimizes the use of non-renewable energy sources. It maximizes the use of renewable energy resources by meeting the demand for utility grids. Real data based on the load and demand of the utility grids in Italy is used, and a system that determines the optimal sizing of the microgrid and a daily plan is introduced to optimize the renewable resources operations. As part of the proposal, the objective function for the operation and planning of the microgrid in such a way to minimize cost is formulated. Moreover, a variant of the PSO algorithm named recurrent PSO is implemented. The recurrent PSO algorithm solves the proposed optimization objective function by minimizing the cost for the installation and working of the microgrid. Afterwards, the energy management system algorithm lays out a plan for the daily operation of the microgrid. The performance of the system is evaluated using different state-of-the-art optimization methods. The proposed work can help minimize the use of diesel generators, which not only saves financial resources but also contributes toward a green environment. [ABSTRACT FROM AUTHOR]

The development of the road construction sector determines the consequences on consumption of non-renewable resources, energy expenditure and environmental pollution. Recent sustainability issues have highlighted the importance of efficient design and quality-oriented techniques in this sector, due to the huge amount of materials involved in construction and maintenance activities. Thus, it is necessary to properly quantify the environmental impacts of asphalt mixtures used for pavement construction, considering the whole life cycle of the products. Life cycle assessment (LCA) represents the most appropriate methodological framework for assessing the environmental burdens of a product, from raw material acquisition to final disposal. A common problem for LCA is the lack of primary data useful to calculate the product eco-profile, for a specific production process. In this context, there is generally limited reliable and accurate data regarding the asphalt plant production phase, which represents the most critical phase. Consequently, the aim of this paper is to perform an environmental/energy audit of an asphalt plant and, further, to collect and analyze primary data useful for the definition of the eco-profile of 1 metric ton of hot mix asphalt (HMA), following a "gate to gate" approach, including transport. The asphalt production is examined in a Sicilian batch-mix plant, representing one of the most commonly used for asphalt production in the Italian context. The results are of interest for asphalt mixture producers, contractors, transportation agencies and researchers seeking to quantify asphalt pavement environmental impacts in Italy, based on context-related foreground data. [ABSTRACT FROM AUTHOR]

EU targets for sustainable development call for strong changes in the current energy systems as well as committed protection of environmental resources. This target conflicts if a policy is not going to promote the compatible solutions to both the issues. This is the case of the additional renewable energy sources to be exploited for increasing the share in the electricity mix and in the gross final energy consumption. Solar energy is, currently, the cheapest solution in Southern European Countries, like Italy. In this paper, thanks to the availability of three open databases provided by National Institutions, the authors compared the historic trends and policy scenarios for soil consumption, electricity consumption, and renewable electricity production to check correlations. The provincial scale was chosen as resolution of the analysis. The deviations from the policy scenarios was then addressed to identify the demand for policy recommendations and pathways to promote in order to achieve the target for renewable electricity share as well as the reduction in soli consumption trend in 2030. The role of renewables integrated in the existing contexts, such as building integrated photovoltaics, is considered a key driver for solving this issue. [ABSTRACT FROM AUTHOR]