Search

The pulp and paper industry is critical to global industrial and economic development. Recently, India's pulp and paper industries have been facing severe competitive challenges. The challenges have impaired the environmental performance and resulted in the closure of several operations. Assessment and prediction of the performance of the Indian pulp and paper industry using various parameters is a critical task for researchers. This study proposes a framework for performance assessment and prediction based on Data Envelopment Analysis (DEA), Artificial Neural Networks, and Deep Learning (DL) to assist industry administration and decision-making. We presented a case study based on eight industries to demonstrate the methodology's applicability. This study analyses and predicts industry performance based on sample data observations over 30 years. The result suggests the DEA-DL-based efficiency prediction has an overall MSE of 0.08 compared with the actual efficiency. Furthermore, the efficiency rankings are compared between the three techniques. The results suggest that the integrated DEA-DL method is primarily accurate in most scenarios with the actual values. The findings of this study provide a comprehensive analysis of environmental performance for policymakers. [ABSTRACT FROM AUTHOR]

Purpose: Paper-based artifacts hold significant cultural and social values. However, paper is intrinsically fragile to microorganisms, such as mold, due to its cellulose composition, which can serve as a microorganisms' nutrient source. Mold not only can damage papers' structural integrity and pose significant challenges to conservation works but also may subject individuals attending the contaminated artifacts to health risks. Current approaches for strain identification usually require extensive training, prolonged time for analysis, expensive operation costs, and higher risks of secondary damage due to sampling. Thus, in current conservation practices with mold-contaminated artifacts, little pre-screening or strain identification was performed before mold removal, and the cleaning techniques are usually broad-spectrum rather than strain-specific. With deep learning showing promising applications across various domains, this study investigated the feasibility of using a convolutional neural network (CNN) for fast in-situ recognition and classification of mold on paper. Methods: Molds were first non-invasively sampled from ancient Xuan Paper-based Chinese books from the Qing and Ming dynasties. Strains were identified using molecular biology methods and the four most prevalent strains were inoculated on Xuan paper to create mockups for image collection. Microscopic images of the molds as well as their stains situated on paper were collected using a compound microscope and commercial microscope lens for cell phone cameras, which were then used for training CNN models with a transfer learning scheme to perform the classification of mold. To enable involvement and contribution from the research community, a web interface that actuates the process while providing interactive features for users to learn about the information of the classified strain was constructed. Moreover, a feedback functionality in the web interface was embedded for catching potential classification errors, adding additional training images, or introducing new strains, all to refine the generalizability and robustness of the model. Results & Conclusion: In the study, we have constructed a suite of high-confidence classification CNN models for the diagnostic process for mold contamination in conservation. At the same time, a web interface was constructed that allows recurrently refining the model with human feedback through engaging the research community. Overall, the proposed framework opens new avenues for effective and timely identification of mold, thus enabling proactive and targeted mold remediation strategies in conservation. [ABSTRACT FROM AUTHOR]

Background: In low-middle income countries, healthcare providers primarily use paper health records for capturing data. Paper health records are utilized predominately due to the prohibitive cost of acquisition and maintenance of automated data capture devices and electronic medical records. Data recorded on paper health records is not easily accessible in a digital format to healthcare providers. The lack of real time accessible digital data limits healthcare providers, researchers, and quality improvement champions to leverage data to improve patient outcomes. In this project, we demonstrate the novel use of computer vision software to digitize handwritten intraoperative data elements from smartphone photographs of paper anesthesia charts from the University Teaching Hospital of Kigali. We specifically report our approach to digitize checkbox data, symbol-denoted systolic and diastolic blood pressure, and physiological data. Methods: We implemented approaches for removing perspective distortions from smartphone photographs, removing shadows, and improving image readability through morphological operations. YOLOv8 models were used to deconstruct the anesthesia paper chart into specific data sections. Handwritten blood pressure symbols and physiological data were identified, and values were assigned using deep neural networks. Our work builds upon the contributions of previous research by improving upon their methods, updating the deep learning models to newer architectures, as well as consolidating them into a single piece of software. Results: The model for extracting the sections of the anesthesia paper chart achieved an average box precision of 0.99, an average box recall of 0.99, and an mAP0.5-95 of 0.97. Our software digitizes checkbox data with greater than 99% accuracy and digitizes blood pressure data with a mean average error of 1.0 and 1.36 mmHg for systolic and diastolic blood pressure respectively. Overall accuracy for physiological data which includes oxygen saturation, inspired oxygen concentration and end tidal carbon dioxide concentration was 85.2%. Conclusions: We demonstrate that under normal photography conditions we can digitize checkbox, blood pressure and physiological data to within human accuracy when provided legible handwriting. Our contributions provide improved access to digital data to healthcare practitioners in low-middle income countries. [ABSTRACT FROM AUTHOR]

This document is a summary of a special issue of the journal Sensors, titled "Emerging AI+X-Based Sensor and Networking Technologies including Selected Papers from ICGHIT 2022–2023." The special issue features selected papers from the 10th and 11th International Conferences on Green and Human Information Technology (ICGHITs), which were held in Korea and Thailand. The conferences focused on the theme of "Emerging Artificial Intelligent (AI)+X technology" and "Hyper Automation + Human AI" respectively. The selected papers cover various topics such as network security, routing protocols, signal detection, and clustering mechanisms, all incorporating AI-based methods. The issue also includes papers on topics like secure authentication, distance estimation in RFID systems, energy optimization in smart homes, blockchain technology, and radar signal detection. The authors emphasize the importance of both technology and humanity in advancing green and information technologies. [Extracted from the article]

The research groups in computer vision, graphics, and machine learning have dedicated a substantial amount of attention to the areas of 3D object reconstruction, augmentation, and registration. Deep learning is the predominant method used in artificial intelligence for addressing computer vision challenges. However, deep learning on three-dimensional data presents distinct obstacles and is now in its nascent phase. There have been significant advancements in deep learning specifically for three-dimensional data, offering a range of ways to address these issues. This study offers a comprehensive examination of the latest advancements in deep learning methodologies. We examine many benchmark models for the tasks of 3D object registration, augmentation, and reconstruction. We thoroughly analyse their architectures, advantages, and constraints. In summary, this report provides a comprehensive overview of recent advancements in three-dimensional deep learning and highlights unresolved research areas that will need to be addressed in the future. [ABSTRACT FROM AUTHOR]

Digital systems storing cadastral data in vector format are considered effective due to their ability of offering interactive services to citizens and other land-related systems. The adoption of such systems is ubiquitous, but when adopted, they create two non-compatible systems with paper-based cadastral systems whose information needs to be digitised. This study proposes a new approach that is fast and accurate for transforming paper-based cadastral data into digital systems. The proposed method involves deep-learning techniques of the LCNN and ResNet-50 for detecting cadastral parcels and their numbers, respectively, from the cadastral plans. It also contains four functions defined to speed up transformations and compilations of the cadastral plan's data in digital systems. The LCNN is trained and validated with 968 samples. The ResNet-50 is trained and validated with 106,000 samples. The Structural-Average-Precision ( sAP 10 ) achieved with the LCNN was 0.9057. The Precision, Recall and F1-Score achieved with the ResNet-50 were 0.9650, 0.9648 and 0.9649, respectively. These results confirmed that the new method is accurate enough for implementation, and we tested it with a huge set of data from Tanzania. Its performance from the experimented data shows that the proposed method could effectively transform paper-based cadastral data into digital systems. [ABSTRACT FROM AUTHOR]

There is increasing focus on applying deep learning methods to electrocardiograms (ECGs), with recent studies showing that neural networks (NNs) can predict future heart failure or atrial fibrillation from the ECG alone. However, large numbers of ECGs are needed to train NNs, and many ECGs are currently only in paper format, which are not suitable for NN training. We developed a fully-automated online ECG digitisation tool to convert scanned paper ECGs into digital signals. Using automated horizontal and vertical anchor point detection, the algorithm automatically segments the ECG image into separate images for the 12 leads and a dynamical morphological algorithm is then applied to extract the signal of interest. We then validated the performance of the algorithm on 515 digital ECGs, of which 45 were printed, scanned and redigitised. The automated digitisation tool achieved 99.0% correlation between the digitised signals and the ground truth ECG (n = 515 standard 3-by-4 ECGs) after excluding ECGs with overlap of lead signals. Without exclusion, the performance of average correlation was from 90 to 97% across the leads on all 3-by-4 ECGs. There was a 97% correlation for 12-by-1 and 3-by-1 ECG formats after excluding ECGs with overlap of lead signals. Without exclusion, the average correlation of some leads in 12-by-1 ECGs was 60–70% and the average correlation of 3-by-1 ECGs achieved 80–90%. ECGs that were printed, scanned, and redigitised, our tool achieved 96% correlation with the original signals. We have developed and validated a fully-automated, user-friendly, online ECG digitisation tool. Unlike other available tools, this does not require any manual segmentation of ECG signals. Our tool can facilitate the rapid and automated digitisation of large repositories of paper ECGs to allow them to be used for deep learning projects. [ABSTRACT FROM AUTHOR]

Medical imaging refers to the process of obtaining images of internal organs for therapeutic purposes such as discovering or studying diseases. The primary objective of medical image analysis is to improve the efficacy of clinical research and treatment options. Deep learning has revamped medical image analysis, yielding excellent results in image processing tasks such as registration, segmentation, feature extraction, and classification. The prime motivations for this are the availability of computational resources and the resurgence of deep convolutional neural networks. Deep learning techniques are good at observing hidden patterns in images and supporting clinicians in achieving diagnostic perfection. It has proven to be the most effective method for organ segmentation, cancer detection, disease categorization, and computer-assisted diagnosis. Many deep learning approaches have been published to analyze medical images for various diagnostic purposes. In this paper, we review the work exploiting current state-of-the-art deep learning approaches in medical image processing. We begin the survey by providing a synopsis of research works in medical imaging based on convolutional neural networks. Second, we discuss popular pretrained models and general adversarial networks that aid in improving convolutional networks' performance. Finally, to ease direct evaluation, we compile the performance metrics of deep learning models focusing on COVID-19 detection and child bone age prediction. [ABSTRACT FROM AUTHOR]

Objective To discuss the feasibility of directly processing paper-based ECG by using deep learning method, and to propose a method for identifying atrial fibrillation ( AF) from paper-based ECG rapidly and accurately. Methods The 12-lead ECG signals of 1 040 AF and 1 344 non-AF patients were selected from CPSC 2018 Challenge data, and were plotted as ECGs. These ECGs were printed out on papers, and rescanned into images. The paper-based ECGs with white background were obtained by a series of preprocessing. These paper-based ECGs were used to construct AF recognition dataset; the artificial intelligence algorithm (AIA) was trained, validated and tested using the real labels provided by the Challenge as the gold standard. Results The sensitivity, specificity and F1 score of the AIA based on paper-based ECGs are 0. 957, 0. 978 and 0. 969, respectively, and the area under receiver operating characteristic curve is 0. 994. The Grad-CAM based feature visualization results show that in paper-based ECGs, the position of P wave and F wave at the onset of AF provide main references for the algorithm to identify AF, which is consistent with the ECG diagnostic criteria of AF in clinical practice. Conclusion The AF recognition algorithm based on paper-based ECGs shows good performance. The visualization results verify the high efficiency and feasibility of directly analyzing paper-based ECGs by using AIA, which could provide guidance for clinical practice. [ABSTRACT FROM AUTHOR]

• We propose a semi-automatic annotation pipeline to obtain high-quality annotations for scientific papers. • We use a transformer-based generative model to generate both high quality layouts of papers and their annotations. • We populate layout regions with synthetically generated content exploiting a layout-agnostic technique. [Display omitted] Document layout analysis is an important task to extract information from scientific literature. Deep-learning solutions for document layout analysis require large collections of training data that are not always available. We generate a large number of synthetic pages to subsequently train a neural network to perform document object detection. The proposed pipeline allows users to deal with less common layouts for which it is not easy to find large annotated datasets. High-quality annotations for a small collection of papers are obtained through a semi-automatic approach. Then, a generative model, based on LayoutTransformer, is used to generate plausible layouts that are subsequently populated with random information to perform data augmentation. We evaluate the proposed method considering scientific articles with two different types of layouts: double and single columns. For double-column papers, we improve detection by 1% starting from 385 manually annotated scientific articles. For single-column papers, we improve detection by 49% starting from 218 articles. [ABSTRACT FROM AUTHOR]

Since deep low‐frequency tremors are considered to be associated with large earthquakes that occur adjacently on the same subducting plate interface, it is important to investigate tremors that occurred before the establishment of modern seismograph networks such as the High Sensitivity Seismograph Network (Hi‐net). We propose a deep‐learning solution to detect evidence of tremors in scanned images of paper seismogram records from over 50 years ago. In this study, we fine‐tuned a convolutional neural network (CNN) based on the Residual Network, which was pre‐trained using images of synthetic waveforms from our previous study, using a data set comprised of images generated from real seismic data recorded digitally by Hi‐net to facilitate a supervised analysis. The fine‐tuned CNN was able to predict the presence or absence of tremors in the Hi‐net images with an accuracy of 98.64%. Gradient‐weighted Class Activation Mapping heatmaps created to visualize model predictions indicated that the CNN's ability to detect tremors is not degraded by the presence of teleseisms. Once validated using the Hi‐net images, the CNN was applied to paper seismograms recorded from 1966 to 1977 at the Kumano observatory in southwest Japan, operated by Earthquake Research Institute, The University of Tokyo. The CNN showed potential for detecting tremors in scanned images of paper seismogram records from the past, facilitating downstream tasks such as the creation of new tremor catalogs. However, further training using an augmented data set to control for variables such as inconsistent plotting pen thickness is required to develop a universally applicable model. Plain Language Summary: In 2002, deep low‐frequency tremors, which periodically occur with much smaller amplitudes and longer durations than common earthquakes, were discovered owing to the establishment of dense seismic arrays in Japan. These tremors are considered to be associated with megathrust earthquakes because they occur in deeper regions of plate boundaries compared with common earthquakes. Investigating tremors that occurred before the establishment of dense seismic arrays is important since megathrust earthquakes recur on intervals of 100–200 years, and digital records from modern seismic arrays cover only a fraction of that time. In this study, we developed a convolutional neural network based on the Residual Network (ResNet) that extracts tremors from images of waveforms recorded more than 50 years ago, when seismometers drew waveforms directly on drum‐rolled paper using a pen. The proposed ResNet, which was trained on seismogram images generated from synthetic waveforms and real data recorded digitally by modern seismic arrays, was applied to scanned images of paper seismograms recorded from 1966 to 1977 at an observatory in southwest Japan. A list of tremors was successfully obtained; however, further training using data that accounts for variables such as inconsistent plotting pen thickness is required to develop a universally applicable model. Key Points: Convolutional neural network model for detection of deep low‐frequency tremors from seismogram images is proposedThe model trained with seismogram images converted from real seismic data successfully detects tremorsThe detection performances of the trained model for the paper records at the Kumano observatory in southwest Japan are discussed [ABSTRACT FROM AUTHOR]

Machine learning has been leveraged for image analysis applications throughout a multitude of subspecialties. This position paper provides a perspective on the evolutionary trajectory of practical deep learning tools for genitourinary pathology through evaluating the most recent iterations of such algorithmic devices. Deep learning tools for genitourinary pathology demonstrate potential to enhance prognostic and predictive capacity for tumor assessment including grading, staging, and subtype identification, yet limitations in data availability, regulation, and standardization have stymied their implementation. [ABSTRACT FROM AUTHOR]

One of the pandemics that have caused many deaths is the Coronavirus disease 2019 (COVID-19). It first appeared in late 2019, and many deaths are increasing day by day until now. Therefore, the early diagnosis of COVID-19 has become a salient issue. Additionally, the current diagnosis methods have several demerits, and a new investigation is required to enhance the diagnosis performance. In this paper, a set of phases are performed, such as collecting data, filtering and augmenting images, extracting features, and classifying ECG images. The data were obtained from two publicly available ECG image datasets, and one of them contained COVID ECG reports. A set of preprocessing methods are applied to the ECG images, and data augmentation is performed to balance the ECG images based on the classes. A deep learning approach based on a convolutional neural network (CNN) is performed for feature extraction. Four different pre-trained models are applied, such as Vgg16, Vgg19, ResNet-101, and Xception. Moreover, an ensemble of Xception and the temporary convolutional network (TCN), which is named ECGConvnet, is proposed. Finally, the results obtained from the former models are fed to four main classifiers. These classifiers are softmax, random forest (RF), multilayer perception (MLP), and support vector machine (SVM). The former classifiers are used to evaluate the diagnosis ability of the proposed methods. The classification scenario is based on fivefold cross-validation. Seven experiments are presented to evaluate the performance of the ECGConvnet. Three of them are multi-class, and the remaining are binary class diagnosing. Six out of seven experiments diagnose COVID-19 patients. The aforementioned experimental results indicated that ECGConvnet has the highest performance over other pre-trained models, and the SVM classifier showed higher accuracy in comparison with the other classifiers. The resulting accuracies from ECGConvnet based on SVM are (99.74%, 98.6%, 99.1% on the multi-class diagnosis tasks) and (99.8% on one of the binary-class diagnoses, while the remaining achieved 100%). It is possible to develop an automatic diagnosis system for COVID based on deep learning using ECG data. [ABSTRACT FROM AUTHOR]

Alzheimer's disease (AD) is a prevalent neurodegenerative disease with no effective treatment. Efficient and rapid detection plays a crucial role in mitigating and managing AD progression. Deep learning-assisted smartphone-based microfluidic paper analysis devices (μPADs) offer the advantages of low cost, good sensitivity, and rapid detection, providing a strategic pathway to address large-scale disease screening in resource-limited areas. However, existing smartphone-based detection platforms usually rely on large devices or cloud servers for data transfer and processing. Additionally, the implementation of automated colorimetric enzyme-linked immunoassay (c-ELISA) on μPADs can further facilitate the realization of smartphone μPADs platforms for efficient disease detection. This paper introduces a new deep learning-assisted offline smartphone platform for early AD screening, offering rapid disease detection in low-resource areas. The proposed platform features a simple mechanical rotating structure controlled by a smartphone, enabling fully automated c-ELISA on μPADs. Our platform successfully applied sandwich c-ELISA for detecting the β-amyloid peptide 1–42 (Aβ 1–42, a crucial AD biomarker) and demonstrated its efficacy in 38 artificial plasma samples (healthy: 19, unhealthy: 19, N = 6). Moreover, we employed the YOLOv5 deep learning model and achieved an impressive 97 % accuracy on a dataset of 1824 images, which is 10.16 % higher than the traditional method of curve-fitting results. The trained YOLOv5 model was seamlessly integrated into the smartphone using the NCNN (Tencent's Neural Network Inference Framework), enabling deep learning-assisted offline detection. A user-friendly smartphone application was developed to control the entire process, realizing a streamlined "samples in, answers out" approach. This deep learning-assisted, low-cost, user-friendly, highly stable, and rapid-response automated offline smartphone-based detection platform represents a good advancement in point-of-care testing (POCT). Moreover, our platform provides a feasible approach for efficient AD detection by examining the level of Aβ 1–42, particularly in areas with low resources and limited communication infrastructure. The schematic diagram of the overview of an offline deep learning-assisted smartphone-based paper-based microfluidic platform for screening of Alzheimer's disease. [Display omitted] • Deep learning-assisted smartphone-based platform enables offline detection. • Fully automated microfluidic paper analysis devices (μPADs). • Smartphone-based platform for detection of biomarker of Alzheimer's disease. [ABSTRACT FROM AUTHOR]

Due to the increasing size of integrated circuits (ICs), their design and optimization phases (i.e., computer-aided design, CAD) grow increasingly complex. At design time, a large design space needs to be explored to find an implementation that fulfills all specifications and then optimizes metrics like energy, area, delay, reliability, etc. At run time, a large configuration space needs to be searched to find the best set of parameters (e.g., voltage/frequency) to further optimize the system. Both spaces are infeasible for exhaustive search typically leading to heuristic optimization algorithms that find some tradeoff between design quality and computational overhead. Machine learning (ML) can build powerful models that have successfully been employed in related domains. In this survey, we categorize how ML may be used and is used for design-time and run-time optimization and exploration strategies of ICs. A metastudy of published techniques unveils areas in CAD that are well explored and underexplored with ML, as well as trends in the employed ML algorithms. We present a comprehensive categorization and summary of the state of the art on ML for CAD. Finally, we summarize the remaining challenges and promising open research directions. [ABSTRACT FROM AUTHOR]

• Five Machine Learning (ML) models compared for wave height time series prediction. • Complex ML models do not outperform simple AR in wave height time series prediction. • Comment to related papers: signal decomposition in test set series is WRONG. Significant Wave Height (SWH) is crucial in many aspect of ocean engineering. The accurate prediction of SWH has therefore been of immense practical value. Recently, Artificial Intelligence (AI) time series prediction methods have been widely used for single-point short-term SWH time-series forecasting, resulting in many AI-based models claiming to achieve good results. However, the extent to which these complex AI models can outperform traditional methods has largely been overlooked. This study compared five different models - AutoRegressive (AR), eXtreme Gradient Boosting (XGB), Artificial Neural Network (ANN), Long Short-Term Memory (LSTM), and WaveNet - for their performance on SWH time series prediction at 16 buoy locations. Surprisingly, the results suggest that the differences of performance among different models are negligible, indicating that all these AI models have only "learned" the linear auto-regression from the data. Additionally, we noticed that many recent studies used signal decomposition method for such time series prediction, and most of them decomposed the test sets, which is WRONG. [ABSTRACT FROM AUTHOR]

Background: Multimedia creation and curation for assignments have the potential to engage students in deeper learning. Objective: This study explored whether the same homework assignments delivered in paper versus multimedia format resulted in different student experiences. Method: Introductory psychology students submitted either traditional papers or multimedia projects to address the same assignment prompt, a process that was repeated seven times throughout four courses and was either instructor-determined or student-selected. Students were surveyed about the assignment formats, and assignment grades were analyzed. Results: Overall, students found the multimedia assignments more engaging, more enjoyable, more interesting, and more difficult than paper assignments. When assignments were instructor-determined, students reported higher perceived learning for the multimedia assignments. Assignment grades were not significantly different between assignment formats. Conclusion and teaching implications: These results suggest that moving traditional paper assignments into a multimedia format is a no-cost way to improve the student experience. [ABSTRACT FROM AUTHOR]

Artificial intelligence is more present than ever, both in our society in general and in science. At the center of this development has been the concept of deep learning, the use of artificial neural networks that are many layers deep and can often reproduce human‐like behavior much better than other machine‐learning techniques. The articles in this collection are some recent examples of its application for X‐ray photon science and crystallography that have been published in Journal of Applied Crystallography. [ABSTRACT FROM AUTHOR]

Introduction/purpose: Anomaly detection-based Network Intrusion Detection Systems (NIDSs) have emerged as a valuable tool, particularly in military fields, for protecting networks against cyberattacks, specifically focusing on Netflow data, to identify normal and abnormal patterns. This study investigates the effectiveness of anomaly-based machine learning (ML) and deep learning (DL) models in NIDSs using the publicly available NF-UQ-NIDS dataset, which utilizes Netflow data, with the aim of enhancing network protection. Methods: The authors Sarhan, M., Layeghy, S., Moustafa, N. and Portmann, M. in the conference paper Big Data Technologies and Applications, in 2021, involve a preprocessing step where 8 features are selected for the training phase out of the 12 available features. Notably, the IP source and destination addresses, as well as their associated ports, are specifically excluded. The novelty of this paper lies in the preprocessing of the excluded features and their inclusion in the training phase, employing various classification ML and DL algorithms such as ExtraTrees, ANN, simple CNN, and VGG16 for binary classification. Results: The performance of the classification models is evaluated using metrics such as accuracy, recall, etc., which provide a comprehensive analysis of the obtained results. The results show that the ExtraTrees ML model outperforms all other models when using our preprocessing features, achieving a classification accuracy of 99.09%, compared to 97.25% in the reference dataset. Conclusion: The study demonstrates the effectiveness of anomalybased ML and DL models in NIDSs using Netflow data. [ABSTRACT FROM AUTHOR]

Beamforming technique can effectively improve the spectrum utilization in the multi‐antenna systems, while the dirty‐paper coding (DPC) technique can reduce the inter‐user interference. In this letter, it is aimed to maximize the weighted sum‐rate under the total power constraint in the multiple‐input‐single‐output (MISO) system with the DPC technique. However, the existing methods of beamforming optimization mainly rely on customized iterative algorithms, which have high computational complexity. To address this issue, the beamforming neural network (BFNNet) is devised by utilizing the deep learning technique and the uplink‐downlink duality and exploring the optimal solution structure, which includes the deep neural network module and the signal processing module. Simulation results show that the BFNNet can achieve near‐optimal solutions and significantly reduce computational complexity. [ABSTRACT FROM AUTHOR]

• Qualitative and quantitative detection of amine gases could be achieved by CSA. • A visible detection of beef freshness using the amine-responsive CSA was proposed. • ResNet34 had the best performance for beef freshness detection based on CSA. • T-SNE could further visualize and understand the classification process of DL. This study developed an innovative approach that combines a colourimetric sensor array (CSA) composed of twelve pH-response dyes with advanced algorithms, aiming to detect amine gases and assess the freshness of chilled beef. With the assistance of multivariate statistical analysis, the sensor array can effectively distinguish five amine gases and enable rapid quantification of trimethylamine vapour with a limit of detection (LOD) of 8.02 ppb and visually monitor the fresh levels of chilled beef. Moreover, the utilization of deep learning models (ResNet34, VGG16, and GoogleNet) for chilled beef freshness evaluation achieved an overall accuracy of 98.0 %. Furthermore, t -distributed stochastic neighbour embedding (t -SNE) visualized the feature extraction process and provided explanations to understand the classification process of deep learning. The results demonstrated that applying deep learning techniques in the process of pattern recognition of CSA can help in realizing the rapid, robust, and accurate assessment of chilled beef freshness. [ABSTRACT FROM AUTHOR]

In the production of paper cups in industrial factories, it is tried to print high quality cups with less waste loss with the help of sensors and heating resistances mounted on the paper cup machine. In this study, a system that detects faulty products based on image processing and removes it by controlling the machine with servo motors, asynchronous motors and programmable logic controller (PLC) is designed. For fault product detection, classification has been performed using real-time Haarcascade algorithm and You Only Look Once (YOLO) algorithm which is a deep learning methods, and real-time object detection has been carried out using the OpenCv library. With this study, an effective faulty product detection and removing hardware system was realized by adapting artificial intelligence algorithms to a machine used in industry. Based on the results, a whole system can be applied to systems that involve removing a faulty product from a band in any production, packaging etc. facility is proposed. A hardware consisting of servo motors, asynchronous motors and PLC was designed to separate faulty cups from the existing paper cup production machine in this study. Then, a data set composed of 1068 images was created with images taken from the camera for faulty and faultless paper cups. Using this dataset, the effect of different deep learning methods on performance in the real-time system has been examined and successful results have been obtained. The optimal outcome was achieved, yielding a real-time application accuracy rate of 90.8% through the utilization of the Yolov5x architecture. [ABSTRACT FROM AUTHOR]

Identifying the genes and mutations that drive the emergence of tumors is a critical step to improving our understanding of cancer and identifying new directions for disease diagnosis and treatment. Despite the large volume of genomics data, the precise detection of driver mutations and their carrying genes, known as cancer driver genes, from the millions of possible somatic mutations remains a challenge. Computational methods play an increasingly important role in discovering genomic patterns associated with cancer drivers and developing predictive models to identify these elements. Machine learning (ML), including deep learning, has been the engine behind many of these efforts and provides excellent opportunities for tackling remaining gaps in the field. Thus, this survey aims to perform a comprehensive analysis of ML-based computational approaches to identify cancer driver mutations and genes, providing an integrated, panoramic view of the broad data and algorithmic landscape within this scientific problem. We discuss how the interactions among data types and ML algorithms have been explored in previous solutions and outline current analytical limitations that deserve further attention from the scientific community. We hope that by helping readers become more familiar with significant developments in the field brought by ML, we may inspire new researchers to address open problems and advance our knowledge towards cancer driver discovery. [ABSTRACT FROM AUTHOR]

Samples were analysed for plasma endogenous adrenocorticotrophic hormone (eACTH), serum cortisol, serum thyroid hormone and plasma histamine. I This study by i [1] I in the United States examined the incidence of abnormal behaviours and their association with concentrations of ovarian hormones associated with a granulosa cell tumour (GCT) i . ELECTROHYDRAULIC SHOCK WAVE THERAPY I In this study i [2] I in the United States examined the effect of the number of electrohydraulic shock wave therapy (ESWT) treatments in the management of superficial digital flexor tendinitis (SDFT) and proximal suspensory desmitis (PSD) injuries and compared short- and long-term outcomes i . [Extracted from the article]

As more people express their thoughts on products on various online shopping platforms, the feelings expressed in these opinions are becoming a significant source of information for marketers and buyers. These opinions have a big impact on consumers' decision to buy the best quality product. When there are too many features or a small number of records to analyze, the decision-making process gets difficult. A recent stream of study has used the conventional quantitative star score ratings and textual content reviews in this context. In this research, a decision-making framework is proposed that relies on feature-based opinions to analyze the textual content of reviews and classify buyer's opinions, thereby assisting consumers in making long-term purchases. The framework is proposed in this paper for product purchase decision making based on feature-based opinions and deep learning. Framework consists of four components: i) Pre-processing, ii) Feature extraction, iii) Feature-based opinion classification, and iv) Decision-making. Web scraping is used to obtain the dataset of Smartphone reviews, which is subsequently clean and pre-processed using tokenization and POS tagging. From the tagged dataset, noun labeled words are retrieved, and then the probable product's features are extracted. These feature-based sentences or reviews are processed using a word embedding to generate review vectors that identify contextual information. These word vectors are used to construct hidden vectors at the word and sentence levels using a hierarchical attention method. With respect to each feature, reviews are divided into five classes: extremely positive, positive, extremely negative, negative, and neutral. The proposed method may readily detect a customer's opinion on the quality of a product based on a certain attribute, which is beneficial in making a purchase choice. [ABSTRACT FROM AUTHOR]

An accurate estimation of three-dimensional (3D) temperature fields in channel flows is challenging but critical for many important applications such as heat exchangers, radiation energy collectors, and enhanced geothermal systems. In this paper, we demonstrate the possibility of inferring temperature fields from concentration fields for laminar convection flows in a 3D channel using a machine learning (ML) approach. The study involves generation of data using 3D numerical simulations, application of deep learning methodology using conditional generative adversarial networks (cGANs), and analysis of how dataset selection affects model performance. The model is also tested for applicability in different convection scenarios. Results show that cGANs can successfully infer temperature fields from concentration fields, and the reconstruction accuracy is sensitive to the training dataset selected. In this study, we demonstrate how ML can be used to overcome the limitations of traditional heat and mass analogy functions widely used in heat transfer research. [ABSTRACT FROM AUTHOR]

Several enhanced sampling techniques rely on the definition of collective variables to effectively explore free energy landscapes. The existing variables that describe the progression along a reactive pathway offer an elegant solution but face a number of limitations. In this paper, we address these challenges by introducing a new path-like collective variable called the "deep-locally non-linear-embedding," which is inspired by principles of the locally linear embedding technique and is trained on a reactive trajectory. The variable mimics the ideal reaction coordinate by automatically generating a non-linear combination of features through a differentiable generalized autoencoder that combines a neural network with a continuous k-nearest neighbor selection. Among the key advantages of this method is its capability to automatically choose the metric for searching neighbors and to learn the path from state A to state B without the need to handpick landmarks a priori. We demonstrate the effectiveness of DeepLNE by showing that the progression along the path variable closely approximates the ideal reaction coordinate in toy models, such as the Müller-Brown potential and alanine dipeptide. Then, we use it in the molecular dynamics simulations of an RNA tetraloop, where we highlight its capability to accelerate transitions and estimate the free energy of folding. [ABSTRACT FROM AUTHOR]

The current focus in Autonomous Experimentation (AE) is on developing robust workflows to conduct the AE effectively. This entails the need for well-defined approaches to guide the AE process, including strategies for hyperparameter tuning and high-level human interventions within the workflow loop. This paper presents a comprehensive analysis of the influence of initial experimental conditions and in-loop interventions on the learning dynamics of Deep Kernel Learning (DKL) within the realm of AE in scanning probe microscopy. We explore the concept of the "seed effect," where the initial experiment setup has a substantial impact on the subsequent learning trajectory. Additionally, we introduce an approach of the seed point interventions in AE allowing the operator to influence the exploration process. Using a dataset from Piezoresponse Force Microscopy on PbTiO3 thin films, we illustrate the impact of the "seed effect" and in-loop seed interventions on the effectiveness of DKL in predicting material properties. The study highlights the importance of initial choices and adaptive interventions in optimizing learning rates and enhancing the efficiency of automated material characterization. This work offers valuable insights into designing more robust and effective AE workflows in microscopy with potential applications across various characterization techniques. [ABSTRACT FROM AUTHOR]

Pathogens cause various infectious diseases and high morbidity and mortality which is a global public health threat. The highly sensitive and specific detection is of significant importance for the effective treatment and intervention to minimise the impact. However, conventional detection methods including culture and molecular method gravely depend on expensive equipment and well-trained skilled personnel, limiting in the laboratory. It remains challenging to adapt in resource-limiting areas, e.g., low and middle-income countries (LMICs). To this end, low-cost, rapid, and sensitive detection tools with the capability of field testing e.g., a portable device for identification and quantification of pathogens, has attracted increasing attentions. Recently, paper-based microfluidic analytical devices (μPADs) have shown a promising tool for rapid and on-site diagnosis, providing a cost-effective and sensitive analytical approach for pathogens detection. The fast turn-round data collection may also contribute to better understanding of the risks and insights on mitigation method. In this paper, critical developments of μPADs for in-field detection of pathogens both for clinical diagnostics and environmental surveillance are reviewed. The future development, and challenges of μPADs for rapid and onsite detection of pathogens are discussed, including using the cross-disciplinary development with, emerging techniques such as deep learning and Internet of Things (IoT). [Display omitted] • The state-of-the-art on μPAD is critically reviewed. • μPAD enables onsite detections of biochemical markers from molecules to organisms. • Insights is provided highlighting on multidisciplinary aspects. [ABSTRACT FROM AUTHOR]

To address the issues in clothing pattern style migration, this paper proposes a digital simulation and re-editing method for clothing patterns based on deep learning and somatosensory interaction. First, the proposed method encodes the black-and-white line drawing image, generating random noise images through a diffusion process, introducing color information for synthesis, and using a decoder to reconstruct a colored image. Afterwards, an improved VGG19 model is used to reconstruct content features and perform linear color transformation on style images, enabling pattern style migration through the construction of a Gram matrix and resulting in colored clothing texture patterns. Finally, a KinectV2 is utilized for fabric simulation, overlaying colorful clothing texture patterns to achieve 3D virtual dressing. The experimental results show that the proposed method improves the structural similarity index measure (SSIM) by 9–11% and the peak signal-to-noise ratio (PSNR) by 3–8% when compared to existing algorithms. The experiments provide evidence that the proposed method effectively mitigates color overflow, delivers precise image coloring, and accomplishes realistic restoration of clothing texture. Furthermore, the method offers an improved garment fit to fulfill the user's interaction requirements. [ABSTRACT FROM AUTHOR]

With the rapid development and widespread application of blockchain technology in recent years, smart contracts running on blockchains often face security vulnerability problems, resulting in significant economic losses. Unlike traditional programs, smart contracts cannot be modified once deployed, and vulnerabilities cannot be remedied. Therefore, the vulnerability detection of smart contracts has become a research focus. Most existing vulnerability detection methods are based on rules defined by experts, which are inefficient and have poor scalability. Although there have been studies using machine learning methods to extract contract features for vulnerability detection, the features considered are singular, and it is impossible to fully utilize smart contract information. In order to overcome the limitations of existing methods, this paper proposes a smart contract vulnerability detection method based on deep learning and multimodal decision fusion. This method also considers the code semantics and control structure information of smart contracts. It integrates the source code, operation code, and control-flow modes through the multimodal decision fusion method. The deep learning method extracts five features used to represent contracts and achieves high accuracy and recall rates. The experimental results show that the detection accuracy of our method for arithmetic vulnerability, re-entrant vulnerability, transaction order dependence, and Ethernet locking vulnerability can reach 91.6%, 90.9%, 94.8%, and 89.5%, respectively, and the detected AUC values can reach 0.834, 0.852, 0.886, and 0.825, respectively. This shows that our method has a good vulnerability detection effect. Furthermore, ablation experiments show that the multimodal decision fusion method contributes significantly to the fusion of different modalities. [ABSTRACT FROM AUTHOR]

In daily clinical practice, clinicians integrate available data to ascertain the diagnostic and prognostic probability of a disease or clinical outcome for their patients. For patients with suspected or known cardiovascular disease, several anatomical and functional imaging techniques are commonly performed to aid this endeavor, including coronary computed tomography angiography (CCTA) and nuclear cardiology imaging. Continuous improvement in positron emission tomography (PET), single-photon emission computed tomography (SPECT), and CT hardware and software has resulted in improved diagnostic performance and wide implementation of these imaging techniques in daily clinical practice. However, the human ability to interpret, quantify, and integrate these data sets is limited. The identification of novel markers and application of machine learning (ML) algorithms, including deep learning (DL) to cardiovascular imaging techniques will further improve diagnosis and prognostication for patients with cardiovascular diseases. The goal of this position paper of the European Association of Nuclear Medicine (EANM) and the European Association of Cardiovascular Imaging (EACVI) is to provide an overview of the general concepts behind modern machine learning-based artificial intelligence, highlights currently prefered methods, practices, and computational models, and proposes new strategies to support the clinical application of ML in the field of cardiovascular imaging using nuclear cardiology (hybrid) and CT techniques. [ABSTRACT FROM AUTHOR]

In recent years, there has been a dramatic increase in research papers about machine learning (ML) and artificial intelligence in radiology. With so many papers around, it is of paramount importance to make a proper scientific quality assessment as to their validity, reliability, effectiveness, and clinical applicability. Due to methodological complexity, the papers on ML in radiology are often hard to evaluate, requiring a good understanding of key methodological issues. In this review, we aimed to guide the radiology community about key methodological aspects of ML to improve their academic reading and peer-review experience. Key aspects of ML pipeline were presented within four broad categories: study design, data handling, modelling, and reporting. Sixteen key methodological items and related common pitfalls were reviewed with a fresh perspective: database size, robustness of reference standard, information leakage, feature scaling, reliability of features, high dimensionality, perturbations in feature selection, class balance, bias-variance trade-off, hyperparameter tuning, performance metrics, generalisability, clinical utility, comparison with traditional tools, data sharing, and transparent reporting. Key Points • Machine learning is new and rather complex for the radiology community. • Validity, reliability, effectiveness, and clinical applicability of studies on machine learning can be evaluated with a proper understanding of key methodological concepts about study design, data handling, modelling, and reporting. • Understanding key methodological concepts will provide a better academic reading and peer-review experience for the radiology community. [ABSTRACT FROM AUTHOR]

Artificial intelligence developments are essential to the successful deployment of community-wide, MRI-driven prostate cancer diagnosis. AI systems should ensure that the main benefits of biopsy avoidance are delivered while maintaining consistent high specificities, at a range of disease prevalences. Since all current artificial intelligence / computer-aided detection systems for prostate cancer detection are experimental, multiple developmental efforts are still needed to bring the vision to fruition. Initial work needs to focus on developing systems as diagnostic supporting aids so their results can be integrated into the radiologists' workflow including gland and target outlining tasks for fusion biopsies. Developing AI systems as clinical decision-making tools will require greater efforts. The latter encompass larger multicentric, multivendor datasets where the different needs of patients stratified by diagnostic settings, disease prevalence, patient preference, and clinical setting are considered. AI-based, robust, standard operating procedures will increase the confidence of patients and payers, thus enabling the wider adoption of the MRI-directed approach for prostate cancer diagnosis. Key Points: • AI systems need to ensure that the benefits of biopsy avoidance are delivered with consistent high specificities, at a range of disease prevalence. • Initial work has focused on developing systems as diagnostic supporting aids for outlining tasks, so they can be integrated into the radiologists' workflow to support MRI-directed biopsies. • Decision support tools require a larger body of work including multicentric, multivendor studies where the clinical needs, disease prevalence, patient preferences, and clinical setting are additionally defined. [ABSTRACT FROM AUTHOR]

Machine learning (ML), a form of artificial intelligence (AI), is being increasingly employed in neurology. Reported performance metrics often match or exceed the efficiency of average clinicians. The neurologist is easily baffled by the underlying concepts and terminologies associated with ML studies. The superlative performance metrics of ML algorithms often hide the opaque nature of its inner workings. Questions regarding ML model's interpretability and reproducibility of its results in real-world scenarios, need emphasis. Given an abundance of time and information, the expert clinician should be able to deliver comparable predictions to ML models, a useful benchmark while evaluating its performance. Predictive performance metrics of ML models should not be confused with causal inference between its input and output. ML and clinical gestalt should compete in a randomized controlled trial before they can complement each other for screening, triaging, providing second opinions and modifying treatment. [ABSTRACT FROM AUTHOR]

The tutorials also covered the field of plasma physics and introduced some new topics and technologies to plasma physicists that connect to our research. The presentations included four invited review talks, 98 invited talks, four tutorials, and four presentations from this year's prize and award recipients. The 64th Annual Meeting of the APS Division of Plasma Physics (DPP) was held October 17-21, 2022 in Spokane, Washington at the Spokane Convention Center. [Extracted from the article]

Municipal papers and polyethylene terephthalate (PET) wastes are primary constituents of municipal solid waste (MSW) which necessitates effective disposal. Co-pyrolysis is an efficient transformation technology for the production of valuable gas and liquid fuels. Therefore, co-pyrolysis characteristics, kinetics, gas and liquid products of cellulose and PET mixtures were investigated in a two-stage reactor by multiple characterizations coupling with deep learning approach. The results indicated that there exhibited positive interaction for cellulose and PET co-pyrolysis in terms of mass difference (δ m) and mass loss rate difference (δ r) between experimental and calculated values. The thermal decomposition process and synergistic effects (δ m and δ r) were accurately predicted by deep learning approaches (R 2 =0.9823–0.9993) using temperature, catalyst, mixing ratio and heating rate variables. Feature importance revealed that the temperature, catalyst, heating rate and mixing ratio were in the descending order to affect the remaining mass from TG curves. And the temperature played a predominant role in synergistic effects. The Flynn-Wall-Ozawa (FWO) method was more suitable for fitting the pyrolysis process to obtain activation energy (E a) with higher R 2 (0.94714–0.99640) compared with Kissinger-Akahira-Sunose (KAS) method. When the mixing ratio of cellulose and PET was 1:1, the E a was significantly reduced to 80.73 KJ/mol, and further reduced to 73.04 KJ/mol by introducing the catalyst, as compared to E a of individual cellulose (178.95 KJ/mol) and PET (198.34 KJ/mol). Co-pyrolysis of cellulose and PET led to a reduction of carbohydrates, furans, alcohols, ketones, and phenols, while the content of acids was remarkably increased which was consistent with the observation in FTIR that the absorption peak of C＝O became sharp and strong. The introduction of ZSM-11 resulted in an increase in aromatics and a decrease in acids content owing to aromatization and deoxygenation. This work is expected to offer beneficial guidance for the efficient disposal of MSW and the application of deep learning methods. [Display omitted] • The interactive pathway for catalytic co-pyrolysis of cellulose and PET was proposed. • The activation energy reached the lowest 73.04 KJ/mol when the mixing ratio was 1:1. • Optimized convolutional neural network predicted synergistic effects with R 2 > 0.99. • Feature importance for TG was temperature > catalyst > heating rate > mixing ratio. [ABSTRACT FROM AUTHOR]

To uncover the evaluation information on the academic contribution of research papers cited by peers based on the content cited by citing papers, and to provide an evidence-based tool for evaluating the academic value of cited papers. CiteOpinion uses a deep learning model to automatically extract citing sentences from representative citing papers; it starts with an analysis on the citing sentences, then it identifies major academic contribution points of the cited paper, positive/negative evaluations from citing authors and the changes in the subjects of subsequent citing authors by means of Recognizing Categories of Moves (problems, methods, conclusions, etc.), and sentiment analysis and topic clustering. Citing sentences in a citing paper contain substantial evidences useful for academic evaluation. They can also be used to objectively and authentically reveal the nature and degree of contribution of the cited paper reflected by citation, beyond simple citation statistics. The evidence-based evaluation tool CiteOpinion can provide an objective and in-depth academic value evaluation basis for the representative papers of scientific researchers, research teams, and institutions. No other similar practical tool is found in papers retrieved. There are difficulties in acquiring full text of citing papers. There is a need to refine the calculation based on the sentiment scores of citing sentences. Currently, the tool is only used for academic contribution evaluation, while its value in policy studies, technical application, and promotion of science is not yet tested. [ABSTRACT FROM AUTHOR]

Olivier was the 2004-2005 President of the European Association of Geoscientists and Engineers (EAGE), and he was the 2003 SEG/EAGE Distinguished Instructor. His PhD research was awarded the John S. Archer award for research excellence by the Department of Earth Science and Engineering, Imperial College London. I Mathematical Geosciences i is fortunate to publish many excellent papers every year, which makes the selection process for the Best Paper Award a challenging undertaking. [Extracted from the article]

Acoustic holography (AH) provides a promising technique for arbitrary acoustic field reconstruction, supporting many applications like robotic micro-nano manipulation, neuromodulation, volumetric imaging, and virtual reality. In AH, three-dimensional (3D) acoustic fields quantified with complex-valued acoustic pressures are reconstructed by virtue of two-dimensional (2D) acoustic holograms. Phase-only hologram (POH) is recently regarded as an energy-efficient way for AH, which is typically implemented by a dynamically programmable phased array of transducers (PATs). As a result, spatiotemporal precise acoustic field reconstruction is enabled by precise, dynamic, and individual actuation of PAT. Thus, 2D POH is required per arbitrary acoustic fields, which can be viewed as a physical inverse problem. However, solving the aforementioned physical inverse problem in numerical manners poses challenges due to its non-linear, high-dimensional, and complex coupling natures. The existing iterative algorithms like the iterative angular spectrum approach (IASA) and iterative backpropagation (IB) still suffer from speed-accuracy trade-offs. Hence, this paper explores a novel physics-iterative-reinforced deep learning method, in which frequency-argument contrastive learning is proposed facilitated by the inherent physical nature of AH, and the energy conservation law is under consideration. The experimental results demonstrate the effectiveness of the proposed method for acoustic field reconstruction, highlighting its significant potential in the domain of acoustics, and pushing forward the combination of physics into deep learning. [ABSTRACT FROM AUTHOR]

• Methodology to automatically generate geo-located waste container maps. • Use of Computer Vision algorithms to detect waste containers. • Automatic division into locations with and without containers in city maps. • Robust model with consistent performance disregarding the container type. • System evaluated in eleven Spanish cities with an average accuracy of 89%. This paper describes the scientific achievements of a collaboration between a research group and the waste management division of a company. While these results might be the basis for several practical or commercial developments, we here focus on a novel scientific contribution: a methodology to automatically generate geo-located waste container maps. It is based on the use of Computer Vision algorithms to detect waste containers and identify their geographic location and dimensions. Algorithms analyze a video sequence and provide an automatic discrimination between images with and without containers. More precisely, two state-of-the-art object detectors based on deep learning techniques have been selected for testing, according to their performance and to their adaptability to an on-board real-time environment: EfficientDet and YOLOv5. Experimental results indicate that the proposed visual model for waste container detection is able to effectively operate with consistent performance disregarding the container type (organic waste, plastic, glass and paper recycling,...) and the city layout, which has been assessed by evaluating it on eleven different Spanish cities that vary in terms of size, climate, urban layout and containers' appearance. [ABSTRACT FROM AUTHOR]

Smartphone has long been considered as one excellent platform for disease screening and diagnosis, especially when combined with microfluidic paper-based analytical devices (μPADs) that feature low cost, ease of use, and pump-free operations. In this paper, we report a deep learning-assisted smartphone platform for ultra-accurate testing of paper-based microfluidic colorimetric enzyme-linked immunosorbent assay (c-ELISA). Different from existing smartphone-based μPAD platforms, whose sensing reliability is suffered from uncontrolled ambient lighting conditions, our platform is able to eliminate those random lighting influences for enhanced sensing accuracy. We first constructed a dataset that contains c-ELISA results (n = 2048) of rabbit IgG as the model target on μPADs under eight controlled lighting conditions. Those images are then used to train four different mainstream deep learning algorithms. By training with these images, the deep learning algorithms can well eliminate the influences of lighting conditions. Among them, the GoogLeNet algorithm gives the highest accuracy (>97%) in quantitative rabbit IgG concentration classification/prediction, which also provides 4% higher area under curve (AUC) value than that of the traditional curve fitting results analysis method. In addition, we fully automate the whole sensing process and achieve the "image in, answer out" to maximize the convenience of the smartphone. A simple and user-friendly smartphone application has been developed that controls the whole process. This newly developed platform further enhances the sensing performance of μPADs for use by laypersons in low-resource areas and can be facilely adapted to the real disease protein biomarkers detection by c-ELISA on μPADs. [Display omitted] • This deep learning-assisted smartphone platform is unaffected by ambient lighting. • A fully automated "image in, answer out" operation fashion. • A 2048 custom image dataset is used to test 4 mainstream deep learning algorithms. • GoogLeNet provides >97% accuracy in quantitative rabbit IgG testing. • The area under the curve (AUC) is 4% higher than that of conventional methods. [ABSTRACT FROM AUTHOR]