Search

Between 2014 and 2018, the National Oceanic and Atmospheric Administration conducted the NOAA Satellite Observing System Architecture (NSOSA) study to plan for the next generation of operational environmental satellites. The study generated some important questions that could be addressed by observing system simulation experiments (OSSEs). This paper describes a series of OSSEs in which benefits to numerical weather prediction from existing observing systems are combined with enhancements from potential future capabilities. Assessments include the relative value of the quantity of different types of thermodynamic soundings for global numerical weather applications. We compare the relative impact of several sounding configuration scenarios for infrared (IR), microwave (MW), and radio occultation (RO) observing capabilities. The main results are 1) increasing the revisit rate for satellite radiance soundings produces the largest benefits but at a significant cost by requiring an increase in the number of polar-orbiting satellites from 2 to 12; 2) a large positive impact is found when the number of RO soundings per day is increased well beyond current values and other observations are held at current levels of performance; 3) RO can be used as a mitigation strategy for lower MW/IR sounding revisit rates, particularly in the tropics; and 4) smaller benefits result from increasing the horizontal resolution along the track of the satellites of MW/IR satellite radiances. Furthermore, disaggregating IR and MW instruments into six evenly distributed sun-synchronous orbits is slightly more beneficial than when the same instruments are combined and collocated on three separate orbits. SIGNIFICANCE STATEMENT: The results of this paper are significant because they inform decision-makers about the future configuration of the NOAA's environmental satellite constellation, which serves millions of diverse users. [ABSTRACT FROM AUTHOR]

With hyperspectral instruments measuring radiation emitted by Earth and its atmosphere in the thermal infrared range in multiple channels, several studies were made to select a subset of channels in order to reduce the number of channels to be used in a data assimilation system. An optimal selection of channels based on the information content depends on several factors related to observation and background error statistics and the assimilation system itself. An optimal channel selection for the Cross-track Infrared Sounder (CrIS) was obtained and then compared to selections made for different NWP systems. For instance, the channel selection of Carminati has 224 channels also present in our optimal selection, which includes 455 channels. However, in terms of analysis error variance, the difference between the two selections is small. Integrated over the whole profile, the relative difference is equal to 15.3% and 4.5% for temperature and humidity, respectively. Also, different observation error covariance matrices were considered to evaluate the impact of this matrix on channel selection. Even though the channels selected optimally were different in terms of which channels were selected for the various R matrices, the results in terms of analysis error are similar. Significance Statement: Satellites measure radiation from Earth and its atmosphere in the thermal infrared. Those radiance data contain thousands of measurements, called channels, and thus, a selection needs to be done retaining most of the information content since the large number of individual pieces of information is not usable for numerical weather prediction systems. The goal of this paper is to find an optimal selection for the instrument CrIS and to compare this selection with selections made for different numerical weather prediction systems. It was found that even though the channels selected optimally were different in terms of which channels were selected compared to other selections, the results in terms of precision of the analysis are similar and the results in terms of analysis error are similar due to the nature of hyperspectral instruments, which have multiple Jacobians overlapping. [ABSTRACT FROM AUTHOR]

This paper describes the rainfall and microphysical structure of precipitation associated with Tropical Cyclone Ockhi using polarimetric Doppler weather radar (PDWR) products. The study reports the statistical analysis of precipitation types of tropical cyclone cloud systems over the north Indian Ocean, by combining the observations of the PDWR and disdrometer for the first time. There are few studies that mention initial DWR observations of TC over this low-latitude region below 23.5°N. We tried to further carry out a statistical analysis of precipitating clouds in a cyclone from its depression stage to severe cyclonic stage. This study tries to classify and quantify the contribution of convective and stratiform rain to the total TC rainfall. Precipitating clouds have been classified into convective and stratiform based on reflectivity measurements. The vertical profiles (VPRs) of the radar reflectivity Z and the differential reflectivity ZDR obtained for the stratiform and the convective events are compared. A study of the VPR of the convective events reveals that the Z and ZDR parameters tend to increase as the raindrops descend toward the ground owing to enhanced collision–coalescence processes. The VPR of stratiform rain shows signatures of the bright band (BB). The drop size distribution (DSD) parameters and rainfall rate pertaining to the two different precipitation regimes are estimated from the radar data and have been compared. The Joss–Waldvogel Disdrometer measurements have been used to derive DSD parameters and polarimetric rain-rate relation. [ABSTRACT FROM AUTHOR]

The global positioning system dropwindsonde has provided thousands of high-resolution kinematic and thermodynamic soundings in and around tropical cyclones (TCs) since 1997. These data have revolutionized the understanding of TC structure, improved forecasts, and validated observations from remote sensing platforms. About 400 peer-reviewed studies on TCs using these data have been published to date. This paper reviews the history of dropwindsonde observations, changes to dropwindsonde technology since it was first used in TCs in 1982, and how the data have improved forecasting and changed our understanding of TCs. [ABSTRACT FROM AUTHOR]

Numerical weather prediction models operate on grid spacings of a few kilometers, where deep convection begins to become resolvable. Around this scale, the emergence of coherent structures in the planetary boundary layer, often hypothesized to be caused by cold pools, forces the transition from shallow to deep convection. Yet, the kilometer-scale range is typically not resolved by standard surface operational measurement networks. The measurement campaign Field Experiment on Submesoscale Spatio-Temporal Variability in Lindenberg (FESSTVaL) aimed at addressing this gap by observing atmospheric variability at the hectometer-to-kilometer scale, with a particular emphasis on cold pools, wind gusts, and coherent patterns in the planetary boundary layer during summer. A unique feature was the distribution of 150 self-developed and low-cost instruments. More specifically, FESSTVaL included dense networks of 80 autonomous cold pool loggers, 19 weather stations, and 83 soil sensor systems, all installed in a rural region of 15-km radius in eastern Germany, as well as self-developed weather stations handed out to citizens. Boundary layer and upper-air observations were provided by eight Doppler lidars and four microwave radiometers distributed at three supersites; water vapor and temperature were also measured by advanced lidar systems and an infrared spectrometer; and rain was observed by a X-band radar. An uncrewed aircraft, multicopters, and a small radiometer network carried out additional measurements during a 4-week period. In this paper, we present FESSTVaL's measurement strategy and show first observational results including unprecedented highly resolved spatiotemporal cold-pool structures, both in the horizontal as well as in the vertical dimension, associated with overpassing convective systems. [ABSTRACT FROM AUTHOR]

The Cyclone Global Navigation Satellite System (CYGNSS) mission has generated several new ocean surface data products. Because of its high overpass rate and ability to measure surface wind speeds through weather, these data products are typically higher temporal resolution than traditional satellite tropical cyclone (TC) data products. However, the nature of the Global Navigation Satellite Systems reflectometry (GNSS-R) signal, which is essentially a single pixelwide measurement along the CYGNSS specular point (SP) track on the ground, necessitates aggregating the wind speed data over a period of time to accurately characterize TCs in terms of intensity and structure. The standard CYGNSS level 3 (L3) wind products are averaged over 1 h, which typically is not sufficient to produce an accurate characterization. A new L3 storm-centric gridded (SCG) wind speed product is presented here. It has been developed to improve upon the standard L3 algorithm for the purpose of providing better characterization of TC wind fields over their storm life cycle. This paper describes the L3 SCG algorithm, provides examples of L3 SCG wind fields, and discusses the potential uses and limitations of the new data product. [ABSTRACT FROM AUTHOR]

Aerosol properties are fundamentally different near clouds than away from clouds. This paper reviews the current state of knowledge of aerosol properties in the near-low-cloud environment and quantitatively compares them with aerosols far from clouds, according to remote sensing observations. It interprets observations of aerosol properties from different sensors using satellite, aircraft, and ground-based observations. The correlation (and anticorrelation) between proximity to cloud and aerosol properties is discussed. Retrieval artifacts in the near-cloud environment are demonstrated and quantified for different sensor attributes and environmental conditions. Finally, the paper describes the possible corrections for near-cloud enhancement in remote sensing retrievals. This study is timely in view of science definition studies for NASA's Aerosol, Cloud, Convection and Precipitation (ACCP) mission, which will also seek to directly link aerosol properties to nearby clouds. [ABSTRACT FROM AUTHOR]

A hyperspectral infrared (IR) sounder from geostationary orbit provides nearly continuous measurements of atmospheric thermodynamic and dynamic information within a weather cube, specifically the atmospheric temperature, moisture, and wind information at different pressure levels that are critical for improving high-impact weather (HIW) nowcasting and numerical weather prediction (NWP). Geostationary hyperspectral IR sounders (GeoHIS) have been on board China's Fengyun-4 series since 2016 and will be on board Europe's Meteosat Third Generation (MTG) series in the 2024 time frame; the United States and other countries are also planning to include GeoHIS instruments on their next generation of geostationary weather satellites. Although availability of on-orbit GeoHIS data are limited currently, studies have been conducted and progress has been made on developing the applications of high-temporal-resolution GeoHIS observations. These include but are not limited to deriving three-dimensional wind fields for nowcasting and NWP applications, trending atmospheric instability for warning in preconvective environments, conducting impact studies with data from the experimental Geostationary Interferometric Infrared Sounder (GIIRS) on board Fengyun-4A, preparing observing system simulation experiments (OSSEs), and monitoring diurnal variation of atmospheric composition. This paper provides an overview of the current applications of GeoHIS, discusses the data processing challenges, and provides perspectives on future development. The purpose is to provide direction on utilization of the current and assist preparation for the upcoming GeoHIS observations for nowcasting, NWP and other applications. [ABSTRACT FROM AUTHOR]

This paper describes a new Passive Microwave Empirical Cold Surface Classification Algorithm (PESCA) developed for snow-cover detection and characterization by using passive microwave satellite measurements. The main goal of PESCA is to support the retrieval of falling snow, since several studies have highlighted the influence of snow-cover radiative properties on the falling-snow passive microwave signature. The developed method is based on the exploitation of the lower-frequency channels (<90 GHz), common to most microwave radiometers. The method applied to the conically scanning Global Precipitation Measurement (GPM) Microwave Imager (GMI) and the cross-track-scanning Advanced Technology Microwave Sounder (ATMS) is described in this paper. PESCA is based on a decision tree developed using an empirical method and verified using the AutoSnow product built from satellite measurements. The algorithm performance appears to be robust both for sensors in dry conditions (total precipitable water < 10 mm) and for mean surface elevation < 2500 m, independent of the cloud cover. The algorithm shows very good performance for cold temperatures (2-m temperature below 270 K) with a rapid decrease of the detection capabilities between 270 and 280 K, where 280 K is assumed as the maximum temperature limit for PESCA (overall detection statistics: probability of detection is 0.98 for ATMS and 0.92 for GMI, false alarm ratio is 0.01 for ATMS and 0.08 for GMI, and Heidke skill score is 0.72 for ATMS and 0.69 for GMI). Some inconsistencies found between the snow categories identified with the two radiometers are related to their different viewing geometries, spatial resolution, and temporal sampling. The spectral signatures of the different snow classes also appear to be different at high frequency (>90 GHz), indicating potential impact for snowfall retrieval. This method can be applied to other conically scanning and cross-track-scanning radiometers, including the future operational EUMETSAT Polar System Second Generation (EPS-SG) mission microwave radiometers. [ABSTRACT FROM AUTHOR]

The Joint Typhoon Warning Center (JTWC) utilized new space-based environmental monitoring (SBEM) data alongside traditional data to adjust JTWC tropical cyclone (TC) intensity and structure estimates during production of the official 2019 Best Track dataset. Intensity estimates from multiple platforms such as Advanced Microwave Scanning Radiometer-2 (AMSR2), the Soil Moisture Active Passive (SMAP) and Soil Moisture and Ocean Salinity (SMOS) radiometers, and synthetic aperture radar (SAR), along with objective Dvorak and satellite consensus algorithms, not only aided the poststorm best track (BT) process, but also provided robust data that supported real-time analysis and forecasting. This summary attempts to communicate with the TC community the extent to which these new data affected the 2019 official BT data, how JTWC utilized these new data in the poststorm BT process, and provide examples of how these data influenced forecaster decision-making in real time. This paper makes no attempt to validate the accuracy of the wind speed estimates from these methods (SAR, SMAP/SMOS, or AMSR2) and does not outline the entirety of the JTWC process for determining TC intensity, but it does outline, briefly, the impact of these new datasets on the final JTWC BT intensity estimates and on real-time analysis. These methodologies are valuable sources of cyclone intensity estimates in an otherwise data-sparse area of responsibility, and in many cases provide critical data not captured by traditional methods alone, which are detailed further in this summary. [ABSTRACT FROM AUTHOR]

Two spaceborne radars currently in orbit enable the sampling of snowfall near the surface and throughout the atmospheric column, namely, CloudSat's Cloud Profiling Radar (CPR) and the Global Precipitation Measurement mission's Dual-Frequency Precipitation Radar (GPM-DPR). In this paper, a direct comparison of the CPR's 2C-SNOW-PROFILE (2CSP), the operational GPM-DPR algorithm (2ADPR) and a neural network (NN) retrieval applied to the GPM-DPR data is performed using coincident observations between both radars. Examination of over 3500 profiles within moderate to strong precipitation (Ka band ≥ 18 dBZ) show that the NN retrieval provides the closest retrieval of liquid equivalent precipitation rate R immediately above the melting level to the R retrieved just below the melting layer, agreeing within 5%. Meanwhile, 2CSP retrieves a maximum value of R at −15°C, decreases by 35% just above the melting layer, and is about 50% smaller than the GPM-DPR retrieved R below the melting layer. CPR-measured reflectivity shows median reduction of 2–3 dB from −15° to −2.5°C, likely the reason for the 2CSP retrieval reduction of R. Two case studies from NASA field campaigns [i.e., Olympic Mountains Experiment (OLYMPEX) and Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS)] provide analogs to the type of precipitating systems found in the comparison between retrieval products. For the snowfall events that GPM-DPR can observe, this work suggests that the 2CSP retrieval is likely underestimating the unattenuated reflectivity, resulting in a potential negative, or low, bias in R. Future work should investigate how frequently the underestimated reflectivity profiles occur within the CPR record and quantify its potential effects on global snowfall accumulation estimation. [ABSTRACT FROM AUTHOR]

The catastrophic derecho that occurred on 10 August 2020 across the midwestern United States caused billions of dollars of damage to both urban and rural infrastructure as well as agricultural crops, most notably across the state of Iowa. This paper documents the complex evolution of the derecho through the use of low-Earth-orbit passive-microwave imager and GOES-16 satellite-derived products complemented by products derived from NEXRAD weather radar observations. Additional satellite sensors including optical imagers and synthetic aperture radar (SAR) were used to observe impacts to the power grid and agriculture in Iowa. SAR improved the identification and quantification of damaged corn and soybeans, as compared to true-color composites and normalized difference vegetation index (NDVI). A statistical approach to identify damaged corn and soybean crops from SAR was created with estimates of 1.97 million acres of damaged corn and 1.40 million acres of damaged soybeans in the state of Iowa. The damage estimates generated by this study were comparable to estimates produced by others after the derecho, including two commercial agricultural companies. [ABSTRACT FROM AUTHOR]

The multifractal fusion method has proved to be an effective algorithm to mitigate the noise of the sea surface salinity (SSS) of Soil Moisture Ocean Salinity (SMOS) mission. However, the traditional nonparametric weight function used in this method is unable to fully capture the dynamic evolution of the oceanic environment. Considering the multiscale, nonuniform, anisotropic, and flow-dependent nature of the ocean, a prototype with the so-called flexible circle (FLC) weight function or flexible ellipse (FLE) weight function with a set of predefined parameters is proposed in this paper. The improved weight functions could draw dynamic information from the sea surface temperature, Rossby radius of deformation, and surface geostrophic flow to improve the quality of the remotely sensed SSS. The validation against the in situ data indicates that the improved weight functions perform better than the traditional one with a reduced root-mean-square (RMS) and standard deviation (STD) of the differences with respect to EN 4.2.0 profiles (from 0.50 and 0.46 to 0.42 and 0.38 for FLC and 0.39 and 0.36 for FLE in the global ocean). In particular, the FLE scheme could highlight the variation of the strong currents without affecting the computational efficiency. Furthermore, this paper discusses the influences of the error distribution on the fusion results and underlines the importance of error-based adaptions for further improvements. [ABSTRACT FROM AUTHOR]

A 30-yr time series (4 February 1990–4 February 2020) of aerosol optical depth (AOD) of the atmosphere, total precipitable water (TPW), and total column ozone has been conducted in central Texas using simple, highly stable instruments. All three parameters in this ongoing measurement series exhibited robust annual cycles. They also responded to many atmospheric events, including the historic volcanic eruption of Mount Pinatubo (1991), a record El Niño (1998), an unprecedented biomass smoke event (1998), and La Niña that caused the driest drought in recorded Texas history (2011). Reduced air pollution caused mean AOD to decline from 0.175 to 0.14. The AOD trend measured for 30 years by a light-emitting diode (LED) sun photometer, the first of its kind, parallels the trend from 20 years of measurements by a modified Microtops II. While TPW responded to El Niño–Southern Oscillation conditions, TPW exhibited no trend over the 30 years. The TPW data compare favorably with 4.5 years of simultaneous measurements by a nearby NOAA GPS (r2 = 0.78). The 30 years of ozone measurements compare favorably with those from a series of NASA ozone satellites (r2 = 0.78). In 2016, 194 comparisons of Microtops II and world standard ozone instrument Dobson 83 at the Mauna Loa Observatory agreed within 1.9% (r2 = 0.81). The paper concludes by observing that students and citizen scientists can collect scientifically useful atmospheric data with simple sun photometers that use one or more LEDs as spectrally selective photodiodes. [ABSTRACT FROM AUTHOR]

Simsphere, a soil–vegetation–atmosphere–transfer (SVAT) model developed at The Pennsylvania State University, can be downloaded from the web for use by students and researchers. In existence for several decades, Simsphere has figured in both the classroom and in research at several universities. As such, Simsphere has been supported by a knowledgeable group of academic users and has been applied in a variety of applications, such as in remote sensing of surface soil water content and in the assessment of water and ozone stresses on plants. This paper describes the model and how it can be downloaded and run. [ABSTRACT FROM AUTHOR]

Vertical profiles of atmospheric temperature, moisture, wind, and aerosols are essential information for weather monitoring and prediction. Their availability, however, is limited in space and time because of the significant resources required to observe them. To fill this gap, the New York State Mesonet (NYSM) Profiler Network has been deployed as a national testbed to facilitate the research, development, and evaluation of ground-based profiling technologies and applications. The testbed comprises 17 profiler stations across the state, forming a long-term regional observational network. Each profiler station comprises a ground-based Doppler lidar, a microwave radiometer (MWR), and an environmental Sky Imager--Radiometer (eSIR). Thermodynamic profiles (temperature and humidity) from the MWR, wind and aerosol profiles from the Doppler lidar, and solar radiance and optical depth parameters from the eSIR are collected, processed, disseminated, and archived every 10 min. This paper introduces the NYSM Profiler Network and reviews the network design and siting, instrumentation, network operations and maintenance, data and products, and some example applications that highlight the benefits of the network. Some sample applications include improved situational awareness and monitoring of the sea--land breeze, long-range wildfire smoke transport, air quality (PM2.5 and aerosol optical depth) and boundary layer height. Ground-based profiling systems promise a path forward for filling a critical gap in the U.S. observing system with the potential to improve analysis and prediction for many weather-sensitive sectors, such as aviation, ground transportation, health, and wind energy. [ABSTRACT FROM AUTHOR]

We present an updated cloud regime (CR) dataset based on Moderate Resolution Imaging Spectroradiometer (MODIS) Collection 6.1 cloud products, specifically, joint histograms that partition cloud fraction within distinct combinations of cloud-top pressure and cloud optical thickness ranges. The paper focuses on an edition of the CR dataset derived from our own aggregation of MODIS pixel-level cloud retrievals on an equal-area grid and prespecified 3-h UTC intervals that spatiotemporally match International Satellite Cloud Climatology Project (ISCCP) gridded cloud data. The other edition comes from the 1° daily aggregation provided by standard MODIS Level-3 data, as in previous versions of the MODIS CRs, for easier use with datasets mapped on equal-angle grids. Both editions consist of 11 clusters whose centroids are nearly identical. We provide a physical interpretation of the new CRs and aspects of their climatology that have not been previously examined, such as seasonal and interannual variability of CR frequency of occurrence. We also examine the makeup and precipitation properties of the CRs assisted by independent datasets originating from active observations and provide a first glimpse of how MODIS CRs relate to clouds as seen by ISCCP. SIGNIFICANCE STATEMENT: We present an updated 17-yr dataset of global cloudiness classification from the space-based MODIS instrument. This dataset exhibits similar consistency with the cloud and precipitation characteristics seen by active observations in the previous version, but its greater length allows an initial analysis of trends of cloud systems with distinct physical properties and geographical characteristics. Furthermore, custom tailoring to spatiotemporally match the ISCCP dataset enables systematic comparisons with that seminal description of cloud climatological characteristics. [ABSTRACT FROM AUTHOR]

After successful launch in November 2018 and successful commissioning of Metop-C, all three satellites of the EUMETSAT Polar System (EPS) are in orbit together and operational. EPS is part of the Initial Joint Polar System (IJPS) with the United States (NOAA) and provides the service in the midmorning orbit. The Metop satellites carry a mission payload of sounding and imaging instruments, which allow provision of support to operational meteorology and climate monitoring, which are the main mission objectives for EPS. Applications include numerical weather prediction, atmospheric composition monitoring, and marine meteorology. Climate monitoring is supported through the generation of long time series through the program duration of 20+ years. The payload was developed and contributed by partners, including NOAA, CNES, and ESA. EUMETSAT and ESA developed the space segment in cooperation. The system has proven its value since the first satellite Metop-A, with enhanced products at high reliability for atmospheric sounding, delivered a very strong positive impact on NWP and results beyond expectations for atmospheric composition and chemistry applications. Having multiple satellites in orbit—now three—has enabled enhanced and additional products with increased impact, like atmospheric motion vector products at latitudes not accessible to geostationary observations or increased probability of radio occultations and hence atmospheric soundings with the Global Navigation Satellite System (GNSS) Radio-Occultation Atmospheric Sounder (GRAS) instruments. The paper gives an overview of the system and the embarked payload and discusses the benefits of generated products for applications and services. The conclusions point to the follow-on system, currently under development and assuring continuity for another 20+ years. [ABSTRACT FROM AUTHOR]

Fengyun-4A (FY-4A) is a geostationary meteorological satellite with four advanced payloads, which can be used to quantitatively detect Earth’s atmospheric system with multispectral and high spatial and temporal resolution. However, the applicable model limits the application of the FY-4A satellite data. In this paper, the empirical statistical model developed for the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor is extended for FY-4A Advanced Geosynchronous Radiation Imager (AGRI), and it is applied to observed data to evaluate the applicability of the model for AGRI measurements. To improve the accuracy of radiation estimation, the artificially intelligent particle swarm optimization (PSO) algorithm was used for model optimizing. Results show that the estimated radiation has diurnal variation that is in accord with the characteristics of radiation variation. The estimated net surface shortwave radiation (Sn) and observed values show good correlation. However, large deviations from observations are found in the estimated values when the empirical model based on MODIS is directly used to process AGRI data. Thus, the empirical statistical model based on MODIS can be applied to AGRI data, but the empirical parameters need to be revised. Optimization of the empirical statistical model by the PSO algorithm can effectively improve the accuracy of the radiation estimate. The mean absolute percentage error (MAPE) of Sn estimated by optimized models is reduced to 15%. The MAPE of the net surface longwave radiation (Ln) estimated by optimized models is reduced to 31%, and the MAPE of the net radiation (Rn) estimated by optimized models is reduced to 27%. However, for the uncertainty caused by error accumulation effect, the influence of PSO optimization on Rn is not as obvious as that of Ln. However, the analysis of error distribution shows that PSO optimization does improve the estimation results of Rn. Based on AGRI data, the surface radiation can be estimated simply, and the regional or larger-scale surface radiation retrieval can quickly be realized by this method, which has large application potential and popularization value. [ABSTRACT FROM AUTHOR]

Microphysical processes within mixed-phase convective clouds can have cascading impacts on cloud properties and resultant precipitation. This paper investigates the role of microphysics in the lake-effect storm (LES) observed during intensive observing period 4 of the Ontario Winter Lake-effect Systems field campaign. Amicrophysical ensemble is composed of 24 simulations that differ in the microphysics scheme used (e.g., Weather Research and Forecasting Model microphysics options or a choice of two bulk adaptive habit models) along with changes in the representation of aerosol and potential ice nuclei concentrations, ice nucleation parameterizations, rain and ice fall speeds, spectral indices, ice habit assumptions, and the number of moments used for modeling ice-phase hydrometeors in each adaptive habit model. Each of these changes to microphysics resulted in varied precipitation types at the surface; 15 members forecast a mixture of snow, ice, and graupel, 7 members forecast only snow and ice, and the remaining 2 members forecast a combination of snow, ice, graupel, and rain. Observations from an optical disdrometer positioned to the south of the LES core indicate that 92% of the observed particles were snow and ice, 5% were graupel, and 3% were rain and drizzle. Analysis of observations spanning more than a point location, such as polarimetric radar observations and aircraft measurements of liquid water content, provides insight into cloud composition and processes leading to the differences at the surface. Ensemble spread is controlled by hydrometeor type differences spurred by processes or parameters (e.g., ice fall speed) that affect graupel mass. [ABSTRACT FROM AUTHOR]

A practical method for instrumental calibration and aerosol optical properties retrieval based on coherent Doppler lidar (CDL) and sun photometer is presented in this paper. To verify its feasibility and accuracy, this method is applied into three field experiments in 2019 and 2020. In this method, multiwavelength (440, 670, 870, and 1020 nm) aerosol optical depth (AOD) from sun-photometer measurements are used to estimate AOD at 1550 nm and calibrate integrated CDL backscatter signal. Then it is validated by comparing the retrieved calibrated AOD at 1550 nm from CDL signal and that from sun-photometer measurements. Good agreement between them with the correlation of 0.96, the RMSE of 0.0085, and the mean relative error of 22% is found. From the comparison results of these three experiments, sun photometer is verified to be an effective reference instrument for the calibration of CDL return signal and the aerosol optical properties measurement with CDL is feasible. It is expected to promote the study on the aerosol flux and transport mechanism in the planetary boundary layer with the widely deployed CDLs. Significance Statement: A practical method to calibrate and retrieve the vertical profiles of aerosol optical properties with coherent Doppler lidar (CDL) is proposed. Besides the wind field measurement ability, the extended capability of CDL in observing the aerosol optical properties is developed. In this method, a collocated sun photometer is operated as the reference instrument to calibrate and validate the aerosol optical properties from CDL. Since sun photometers and CDLs are world-widely deployed, this method has significant practical value. Additionally, once a CDL is well calibrated, it is promising to mount it on various platforms for simultaneous observations of aerosol optical properties and wind fields. Consequently, the CDL has the potential to measure the aerosol fluxes and vertical transport within the planetary boundary layers. [ABSTRACT FROM AUTHOR]

The NASA Goddard Space Flight Center's (GSFC's) W-band (94 GHz) Cloud Radar System (CRS) has been comprehensively updated to modern solid-state and digital technology. This W-band (94 GHz) radar flies in nadir-pointing mode on the NASA ER-2 high-altitude aircraft, providing polarimetric reflectivity and Doppler measurements of clouds and precipitation. This paper describes the design and signal processing of the upgraded CRS. It includes details on the hardware upgrades [solid-state power amplifier (SSPA) transmitter, antenna, and digital receiver] including a new reflectarray antenna and solid-state transmitter. It also includes algorithms, including internal loop-back calibration, external calibration using a direct relationship between volume reflectivity and the range-integrated backscatter of the ocean, and a modified staggered–pulse repetition frequency (PRF) Doppler algorithm that is highly resistant to unfolding errors. Data samples obtained by upgraded CRS through recent NASA airborne science missions are provided. [ABSTRACT FROM AUTHOR]

Latent and sensible heat fluxes over the oceans are believed to play an important role in the genesis and evolution of marine-based extratropical cyclones (ETCs) and affect rapid cyclogenesis. Observations of ocean surface heat fluxes are limited from existing in situ and remote sensing platforms, which may not offer sufficient spatial and temporal resolution. In addition, substantial precipitation frequently veils the ocean surface around ETCs, limiting the capacity of spaceborne instruments to observe the surface processes within maturing ETCs. Although designed as a tropics-focused mission, the Cyclone Global Navigation Satellite System (CYGNSS) can observe ocean surface wind speed and heat fluxes within a notable quantity of low-latitude extratropical fronts and cyclones. These observations can assist in understanding how surface processes may play a role in cyclogenesis and evolution. This paper illustrates CYGNSS's capability to observe extratropical cyclones manifesting in various ocean basins throughout the globe and shows that the observations provide a robust sample of ETCs winds and surface fluxes, as compared with a reanalysis dataset. [ABSTRACT FROM AUTHOR]

A robust and computationally efficient object tracking algorithm is developed by incorporating various tracking techniques. Physical properties of the objects, such as brightness temperature or reflectivity, are not considered. Therefore, the algorithm is adaptable for tracking convection-like features in simulated data and remotely sensed two-dimensional images. In this algorithm, a first guess of the motion, estimated using the Fourier phase shift, is used to predict the candidates for matching. A disparity score is computed for each target–candidate pair. The disparity also incorporates overlapping criteria in the case of large objects. Then the Hungarian method is applied to identify the best pairs by minimizing the global disparity. The high-disparity pairs are unmatched, and their target and candidate are declared expired and newly initiated objects, respectively. They are tested for merger and split on the basis of their size and overlap with the other objects. The sensitivity of track duration is shown for different disparity and size thresholds. The paper highlights the algorithm's ability to study convective life cycles using radar and simulated data over Darwin, Australia. The algorithm skillfully tracks individual convective cells (a few pixels in size) and large convective systems. The duration of tracks and cell size are found to be lognormally distributed over Darwin. The evolution of size and precipitation types of isolated convective cells is presented in the Lagrangian perspective. This algorithm is part of a vision for a modular platform [viz., TINT is not TITAN (TINT) and Tracking and Object-Based Analysis of Clouds (tobac)] that will evolve into a sustainable choice to analyze atmospheric features. [ABSTRACT FROM AUTHOR]

Between 2014 and 2018, the NOAA Office of Systems Architecture and Advanced Planning (OSAAP) conducted the NOAA Satellite Observing System Architecture (NSOSA) study to plan the long-term future of the NOAA constellation of operational environmental satellites. This constellation of satellites (which may include space capabilities acquired in lieu of U.S. government satellites) will follow the current GOES-R and JPSS satellite programs, beginning about 2030. This was an opportunity to design a modern architecture with no preconceived notions regarding instruments, platforms, orbits, etc., but driven by user needs, new technology, and exploiting emerging space business models. In this paper we describe how the study was structured, review major results, show how observation priorities and estimated costs drove next-generation choices, and discuss important challenges for implementing the next generation of U.S. civil environmental remote sensing satellites. [ABSTRACT FROM AUTHOR]

Over the last two decades, the Central Weather Bureau of Taiwan and the U.S. National Severe Storms Laboratory have been involved in a research and development collaboration to improve the monitoring and prediction of river flooding, flash floods, debris flows, and severe storms for Taiwan. The collaboration resulted in the Quantitative Precipitation Estimation and Segregation Using Multiple Sensors (QPESUMS) system. The QPESUMS system integrates observations from multiple mixed-band weather radars, rain gauges, and numerical weather prediction model fields to produce high-resolution (1 km) and rapid-update (10 min) rainfall and severe storm monitoring and prediction products. The rainfall products are widely used by government agencies and emergency managers in Taiwan for flood and mudslide warnings as well as for water resource management. The 3D reflectivity mosaic and QPE products are also used in high-resolution radar data assimilation and for the verification of numerical weather prediction model forecasts. The system facilitated collaborations with academic communities for research and development of radar applications, including quantitative precipitation estimation and nowcasting. This paper provides an overview of the operational QPE capabilities in the Taiwan QPESUMS system. [ABSTRACT FROM AUTHOR]

The Dual-Frequency Precipitation Radar (DPR) on board the Global Precipitation Measurement (GPM) mission core satellite provides the new-generation global observation of rain since 2014. The main objective of this paper is to evaluate the suitability and limitation of GPM-DPR level-2 products over China. The DPR rain rate products are compared with rain gauge data during the summers of 5 years (2014-18). The ground observation network is composed of more than 50 000 rain gauges. The DPR precipitation products for all scans (DPR_NS, DPR_MS, and DPR_HS) generally underestimate rain rates. However, DPR_MS agrees better with gauge estimates thanDPR_NS and DPR_HS, yielding the lowest mean error, systematic deviation, and highest Pearson correlation coefficient. In addition, all three swath types show obvious overestimation over gauge estimates between 0.5 and 1mmh-1 and underestimation when gauge estimates are larger than 1mmh-1. The DPR_HS and DPR_MS agree better with gauge estimates below and above 2.5mmh-1, respectively. A deeper investigation was carried out to analyze the variation of DPR_MS's performance with respect to terrains over China. An obvious underestimation, relative to gauge estimates, occurs in Tibetan Plateau while a slight overestimation occurs in the North China Plain. Furthermore, our comprehensive analysis suggests that in Sichuan Basin, the DPR_MS exhibit the best agreement with gauge estimates. [ABSTRACT FROM AUTHOR]

Several studies in the literature have developed approaches to diagnose hail storms from satellite-borne passive microwave imagery and build nearly global climatologies of hail. This paper uses spaceborne Ku-band radar measurements from the Global Precipitation Measurement (GPM) mission Dual-Frequency Precipitation Radar (DPR) to validate several passive microwave approaches. We assess the retrievals on the basis of how tightly they constrain the radar reflectivity at −20°C and how this measured radar reflectivity aloft varies geographically. The algorithm that combines minimum 19-GHz polarization corrected temperature (PCT) with a 37-GHz PCT depression normalized by tropopause height constrains the radar reflectivity most tightly and gives the least appearance of regional biases. A retrieval that is based on a 19-GHz PCT threshold of 261K also produces tightly clustered profiles of radar reflectivity, with little regional bias. An approach using regionally adjusted minimum 37-GHz PCT performs relatively well, but our results indicate it may overestimate hail in some subtropical and midlatitude regions. A threshold applied to the minimum 37-GHz PCT (≤230 K), without any scaling by region or probability of hail, overestimates hail in the tropics and underestimates beyond the tropics. For all retrieval approaches, storms identified as having hail tended to have radar reflectivity profiles that are consistent with general expectations for hailstorms (reflectivity > 50 dBZ below the 0°C level, and > 40 dBZ extending far above 0°C). Profiles from oceanic regions tended to have more rapidly decreasing reflectivity with height than profiles from other regions. Subtropical, high-latitude, and high-terrain land profiles had the slowest decreases of reflectivity with height. [ABSTRACT FROM AUTHOR]

Partial beam blockage (PBB) correction is an indispensable step in weather radar data quality control and subsequent quantitative applications, such as precipitation estimation, especially in urban and/or complex terrain environments. This paper developed a novel PBB correction procedure based on the improved ZPHI method for attenuation correction and regional specific differential propagation phase (KDP)–reflectivity (ZH) relationship derived from in situ raindrop size distribution (DSD) measurements. The practical performance of this PBB correction technique was evaluated through comparing the spatial continuity of reflectivity measurements, the consistency between radar-measured and DSD-derived KDP and ZH relationships, as well as rainfall estimates based on R(ZH) and R(KDP). The results showed that through incorporating attenuation and PBB corrections (i) the spatial continuity of ZH measurements can effectively be enhanced; (ii) the distribution of radar-measured KDP versus ZH is more consistent with the DSD-derived KDP versus ZH; (iii) the measured ZH from a C-band radar in the PBB-affected area becomes more consistent with collocated S-band measurements, particularly in the rainstorm center area where ZH is larger than 30 dBZ; and (iv) rainfall estimates based on R(ZH) in the PBB-affected area are incrementally improved with better spatial continuity and the performance tends to be more comparable with R(KDP). [ABSTRACT FROM AUTHOR]

This paper describes a technique for estimating the liquid water content (LWC) and a characteristic particle diameter in stratocumulus clouds using radar and lidar observations. The uncertainty in LWC estimate from radar and lidar measurements is significantly reduced once the characteristic particle diameter is known. The technique is independent of the drop size distribution. It is applicable for a broad range of W-band reflectivity Z between −30 and 0 dBZ and all values of lidar backscatter β observations. No partitioning of cloud or drizzle is required on the basis of an arbitrary threshold of Z as in prior studies. A method for estimating droplet diameter and LWC was derived from the electromagnetic simulations of radar and lidar observations. In situ stratocumulus cloud and drizzle probe spectra were input to the electromagnetic simulation. The retrieved droplet diameter and LWC were validated using in situ measurements from the southeastern Pacific Ocean. The retrieval method was applied to radar and lidar measurements from the northeastern Pacific. Uncertainty in the retrieved droplet diameter and LWC that are due to the measurement errors in radar and lidar backscatter measurements are 7% and 14%, respectively. The retrieved LWC was validated using the concurrent G-band radiometer estimates of the liquid water path. [ABSTRACT FROM AUTHOR]

Temperature sounding microwave radiometers flown on polar-orbiting weather satellites provide a long-term, global-scale record of upper-atmosphere temperatures, beginning in late 1978 and continuing to the present. The focus of this paper is a lower-tropospheric temperature product constructed using measurements made by the Microwave Sounding Unit channel 2 and the Advanced Microwave Sounding Unit channel 5. The temperature weighting functions for these channels peak in the middle to upper troposphere. By using a weighted average of measurements made at different Earth incidence angles, the effective weighting function can be lowered so that it peaks in the lower troposphere. Previous versions of this dataset used general circulation model output to remove the effects of drifting local measurement time on the measured temperatures. This paper presents a method to optimize these adjustments using information from the satellite measurements themselves. The new method finds a global-mean land diurnal cycle that peaks later in the afternoon, leading to improved agreement between measurements made by co-orbiting satellites. The changes result in global-scale warming [global trend (70°S-80°N, 1979-2016) = 0.174°C decade−1], ~30% larger than our previous version of the dataset [global trend (70°S-80°N, 1979-2016) = 0.134°C decade−1]. This change is primarily due to the changes in the adjustment for drifting local measurement time. The new dataset shows more warming than most similar datasets constructed from satellites or radiosonde data. However, comparisons with total column water vapor over the oceans suggest that the new dataset may not show enough warming in the tropics. [ABSTRACT FROM AUTHOR]

Continuous monitoring of the earth radiation budget (ERB) is critical to the understanding of Earth's climate and its variability with time. The Clouds and the Earth's Radiant Energy System (CERES) instrument is able to provide a long record of ERB for such scientific studies. This manuscript, which is the first of a two-part paper, describes the new CERES algorithm for improving the clear/cloudy scene classification without the use of coincident cloud imager data. This new CERES algorithm is based on a subset of the modern artificial intelligence (AI) paradigm called machine learning (ML) algorithms. This paper describes the development and application of the ML algorithm known as random forests (RF), which is used to classify CERES broadband footprint measurements into clear and cloudy scenes. Results from the RF analysis carried using the CERES Single Scanner Footprint (SSF) data for January and July are presented in the manuscript. The daytime RF misclassification rate (MCR) shows relatively large values (>30%) for snow, sea ice, and bright desert surface types, while lower values (<10%) for the forest surface type. MCR values observed for the nighttime data in general show relatively larger values for most of the surface types compared to the daytime MCR values. The modified MCR values show lower values (<4%) for most surface types after thin cloud data are excluded from the analysis. Sensitivity analysis shows that the number of input variables and decision trees used in the RF analysis has a substantial influence on determining the classification error. [ABSTRACT FROM AUTHOR]

The Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2), updates NASA's previous satellite-era (1980 onward) reanalysis system to include additional observations and improvements to the Goddard Earth Observing System, version 5 (GEOS-5), Earth system model. As a major step toward a full Integrated Earth Systems Analysis (IESA), in addition to meteorological observations, MERRA-2 now includes assimilation of aerosol optical depth (AOD) from various ground- and space-based remote sensing platforms. Here, in the first of a pair of studies, the MERRA-2 aerosol assimilation is documented, including a description of the prognostic model (GEOS-5 coupled to the GOCART aerosol module), aerosol emissions, and the quality control of ingested observations. Initial validation and evaluation of the analyzed AOD fields are provided using independent observations from ground, aircraft, and shipborne instruments. The positive impact of the AOD assimilation on simulated aerosols is demonstrated by comparing MERRA-2 aerosol fields to an identical control simulation that does not include AOD assimilation. After showing the AOD evaluation, this paper takes a first look at aerosol-climate interactions by examining the shortwave, clear-sky aerosol direct radiative effect. The companion paper (Part II) evaluates and validates available MERRA-2 aerosol properties not directly impacted by the AOD assimilation (e.g., aerosol vertical distribution and absorption). Importantly, while highlighting the skill of the MERRA-2 aerosol assimilation products, both studies point out caveats that must be considered when using this new reanalysis product for future studies of aerosols and their interactions with weather and climate. [ABSTRACT FROM AUTHOR]

The ability to separate cloud and drizzle returns in active remote sensing observations is important for understanding the microphysics of clouds and precipitation. Yet, robust separations remain challenging in radar remote sensing. Prior methods for cloud and drizzle separation for radar observations use the properties of the Doppler spectra such as skewness. However, these methods have challenges when the drizzle becomes dominant in the observation volume. This paper presents a parametric time domain method (PTDM) that separates cloud and drizzle using the Doppler spectra measurements without assuming any prior properties of cloud and drizzle. The advantage of PTDM is that it can estimate the signal properties in the time domain and can obtain the cloud and drizzle estimates simultaneously. Based on our radar signal simulations, the uncertainty in estimated power and velocity from PTDM are within 2 dB and 0.02ms-1, respectively. We have also evaluated the PTDM algorithm using observations from the Atmospheric Radiation Measurement (ARM) Program W-band cloud radar in the Clouds,Aerosols, and Precipitation in theMarineBoundary Layer(CAP-MBL) campaign at the Azores in 2009-10. Two cases corresponding to light andmoderate drizzling conditions are considered for the study. The statistics of the estimates obtained show that the PTDM method performs well in separating the cloud and drizzle returns. Finally, the estimated cloud and drizzle reflectivity from PTDM were used to retrieve their corresponding microphysical properties, showing that the retrieved liquid water path agrees to 25 gm-2 with the benchmark microwave method. [ABSTRACT FROM AUTHOR]

Using a two-year dataset (2016–17) from 17 one-minute rain gauges located in the moist forest region of Ghana, the performance of Integrated Multisatellite Retrievals for GPM, version 6b (IMERG), is evaluated based on a subdaily time scale, down to the level of the underlying passive microwave (PMW) and infrared (IR) sources. Additionally, the spaceborne cloud product Cloud Property Dataset Using SEVIRI, edition 2 (CLAAS-2), available every 15 min, is used to link IMERG rainfall to cloud-top properties. Several important issues are identified: 1) IMERG's proneness to low-intensity false alarms, accounting for more than a fifth of total rainfall; 2) IMERG's overestimation of the rainfall amount from frequently occurring weak convective events, while that of relatively rare but strong mesoscale convective systems is underestimated, resulting in an error compensation; and 3) a decrease of skill during the little dry season in July and August, known to feature enhanced low-level cloudiness and warm rain. These findings are related to 1) a general oversensitivity for clouds with low ice and liquid water path and a particular oversensitivity for low cloud optical thickness, a problem which is slightly reduced for direct PMW overpasses; 2) a pronounced negative bias for high rain intensities, strongest when IR data are included; and 3) a large fraction of missed events linked with rainfall out of warm clouds, which are inherently misinterpreted by IMERG and its sources. This paper emphasizes the potential of validating spaceborne rainfall products with high-resolution rain gauges on a subdaily time scale, particularly for the understudied West African region. [ABSTRACT FROM AUTHOR]

This paper addresses issues of statistical misrepresentation of the a priori parameters (henceforth called ancillary parameters) used in geophysical data estimation. Parameterizations using ancillary data are frequently needed to derive geophysical data of interest from remote measurements. Empirical fits to the ancillary data that do not preserve the distribution of such data may induce substantial bias. A semianalytical averaging approach based on Taylor expansion is presented to improve estimated cirrus ice water content and sedimentation flux for a range of volume extinction coefficients retrieved from spaceborne lidar observations by CALIOP combined with the estimated distribution of ancillary data from in situ aircraft measurements of ice particle microphysical parameters and temperature. It is shown that, given an idealized distribution of input parameters, the approach performs well against Monte Carlo benchmark predictions. Using examples with idealized distributions at the mean temperature for the tropics at 15 km, it is estimated that the commonly neglected variance observed in in situ measurements of effective diameters may produce a worst-case estimation bias spanning up to a factor of 2. For ice sedimentation flux, a similar variance in particle size distributions and extinctions produces a worst-case estimation bias of a factor of 9. The value of the bias is found to be mostly set by the correlation coefficient between extinction and ice effective diameter, which in this test ranged between all possible values. Systematic reporting of variances and covariances in the ancillary data and between data and observed quantities would allow for more accurate observational estimates. [ABSTRACT FROM AUTHOR]

Using data from the 6 July 2015 PECAN case study, this paper provides the first objective assessment of how the assimilation of ground-based remote sensing profilers affects the forecasts of bore-driven convection. To account for the multiscale nature of the phenomenon, data impacts are examined separately with respect to (i) the bore environment, (ii) the explicitly resolved bore, and (iii) the bore-initiated convection. The findings from this work suggest that remote sensing profiling instruments provide considerable advantages over conventional in situ observations, especially when the retrieved data are assimilated at a high temporal frequency. The clearest forecast improvements are seen in terms of the predicted bore environment where the assimilation of kinematic profilers reduces a preexisting bias in the structure of the low-level jet. Data impacts with respect to the other two forecast components are mixed in nature. While the assimilation of thermodynamic retrievals from the Atmospheric Emitted Radiance Interferometer (AERI) results in the best convective forecast, it also creates a positive bias in the height of the convectively generated bore. Conversely, the assimilation of wind profiler data improves the characteristics of the explicitly resolved bore, but tends to further exacerbate the lack of convection in the control forecasts. Various dynamical diagnostics utilized throughout this study provide a physical insight into the data impact results and demonstrate that a successful prediction of bore-driven convection requires an accurate depiction of the internal bore structure as well as the ambient environment ahead of it. [ABSTRACT FROM AUTHOR]

As reported in 1954, more than a half century ago, C. Cox and W. Munk developed an empirical model of the slope distribution of ocean surface waves that has been widely used ever since to model the optical properties of the sea surface and is of particular importance to the satellite remote sensing community. In that work, the reflectance of sunlight was photographed from a Boeing B-17G bomber and was then analyzed. In this paper, surface slope statistics are investigated from airborne scanning topographic lidar data collected during a series of field experiments off the coast of California and in the Gulf of Mexico, over a broad range of environmental conditions, with wind speeds ranging from approximately 2 to 13ms-1. Unlike the reflectance-based approach of Cox and Munk, the slope distribution is computed by counting laser glints produced by specular reflections as the lidar is scanned over the surface of the ocean. We find good agreement with their measurements for the mean-square slope and with more recent (2006) results from Bréon and Henriot that were based on satellite remote sensing. Significant discrepancies for the higher-order statistics are found and discussed. We also demonstrate here that airborne scanning lidar technology offers a viable means of remotely estimating surface wind speed and momentum flux. [ABSTRACT FROM AUTHOR]

The Program of the Antarctic Syowa Mesosphere–Stratosphere–Troposphere/Incoherent Scatter (PANSY) radar is a large atmospheric radar located at the Antarctic Syowa Station (69.01°S, 39.59°E). The PANSY radar performed the first incoherent scatter (IS) measurements in the Antarctic region in 2015. Several specific observations were undertaken in 2017 including a 24-h observation of the ionosphere using a peripheral antenna array to suppress interference from the field-aligned irregularities (FAIs). This paper presents the preliminary results derived from the IS measurements using the PANSY radar and the adaptive signal processing techniques to suppress FAIs. The norm-constrained and directionally constrained minimization of power (NC-DCMP) algorithm was applied to the 24-h ionosphere observations by the PANSY radar with a weighting applied to the directional constraint based on the gain differences of the subarrays. When compared with the conventional nonadaptive approach, the number of usable power profiles was increased by about 24% by the gain-weighted NC-DCMP algorithm, suggesting its effectiveness for FAI clutter suppression in ionosphere observations. Furthermore, detection of FAIs using the dedicated antenna array was found valuable in assessing the reliability of estimations of electron density based on VHF-band IS radar data. [ABSTRACT FROM AUTHOR]

Red–green–blue (RGB) composites are increasingly used by operational forecasters to interpret vast amounts of satellite imagery by reducing several bands into a single, easily understood product which identifies important atmospheric features with unique colors. Limb effects, a result of an increase in optical pathlength of the absorbing atmosphere between the satellite and Earth as viewing zenith angle increases, adversely affects RGB composite interpretation by causing anomalous reductions in brightness temperature, thus changing the color interpretation of the RGB composites. In a previous paper, Elmer et al. demonstrated a limb correction technique that effectively removes limb effects from polar-orbiting infrared channels in both clear and cloudy regions using latitudinally and seasonally varying correction coefficients. This study applies the Elmer et al. limb correction to Air Mass RGB composites derived from geostationary sensors and compares the limb-corrected geostationary imagery to limb-corrected polar-orbiter imagery and satellite-derived atmospheric profiles. A statistical comparison in overlapping regions shows that the limb correction reduces the absolute mean brightness temperature difference from 4–12 K to 0–2 K for all infrared bands, demonstrating that the Elmer et al. limb correction algorithm is a robust method of removing limb effects from infrared imagery derived from both geostationary and polar-orbiting sensors. The limb-corrected RGB composites derived from geostationary sensors present several advantages, including the improved depiction of atmospheric features and enabling wider use of imagery from overlapping geostationary coverage regions where viewing zenith angles are large for both geostationary sensors. [ABSTRACT FROM AUTHOR]

At times, high-resolution images of sea surface roughness can provide stunning details of submesoscale upper-ocean dynamics. As interpreted, transformations of short-scale wind waves by horizontal current gradients are responsible for those spectacular observations. Those observations could prove particularly useful to validate numerical ocean models that reach increasingly high resolutions. Focusing on surface roughness at optical wavelengths, two steps have recently been performed in that direction. First, it was shown in a previous paper by Rascle et al. that surface roughness variations not only trace surface current divergence but also other characteristics of the current gradient tensor, mainly the strain in the wind direction. The wind direction with respect to the current gradient thus stands out as an important interpretative parameter. The second step is the purpose of the present paper, where the effect of the viewing direction is investigated. To this end, the authors discuss pairs of quasi-simultaneous sun-glitter images, taken from different satellite positions, to provide different viewing configurations, namely, quasi-orthogonal azimuth angles at similar zenith angles. As evidenced, upwind and crosswind viewing observations can be markedly different. As further confirmed with idealized numerical simulations, this anisotropy well traces anisotropic surface current areas, while more isotropic contrasts likely trace areas dominated by surface divergence conditions. These findings suggest the potential to directly separate divergence from other deformations by using high-resolution roughness observations at multiple azimuth view angles. [ABSTRACT FROM AUTHOR]

The Intergovernmental Panel on Climate Change (IPCC) Fourth Assessment Report found that changes in extreme events have occurred and the frequency of such events is expected to increase. Precipitable water vapor (PWV) is a useful measure of the moisture content of the atmosphere. This paper combines the predictedGCMtrends inPWVfrom 2000 to 2100 with uncertainty estimates from infrared spectrometers,NASA Atmospheric Infrared Sounder (AIRS) and EUMETSAT Infrared Atmospheric Sounding Interferometer (IASI), to estimate minimum trend detection times on regional and global spatial scales. The minimum detection time (MDT) is the number of years before the multimodel GCM trend exceeds a fractional change equal to the uncertainty in the observed product, plus the width of the time window used to smooth out natural variability. Results indicate that the median value of PWV has an MDT of 15 yr or less over all scales, while extreme dry (5th) and wet (95th) PWV conditions (percentiles) have higher measurement uncertainty and corresponding larger MDTs. Product providers have done a relatively good job tuning results to the mean atmospheric state but more attention should be given to improving the satellite estimates for extreme PWV.A fractional measurement error of 3% is desirable to detect predicted climate trends within 15 years or less for the entire PDF of PWV. This paper presents an important case study for the design of observing systems directly linking the estimated uncertainty of the PWV products to the detectability of long-term trends. If there is a need to decrease detection times over the existing weather observation system then necessary changes to the climate observational system design can be understood quantitatively. [ABSTRACT FROM AUTHOR]

Modern polar-orbiting meteorological satellites provide both imaging and sounding observations simultaneously. Most imagers, however, do not have H2O and CO2 absorption bands and therefore struggle to accurately estimate the height of optically thin cirrus clouds. Sounders provide these needed observations, but at a spatial resolution that is too coarse to resolve many important cloud structures. This paper presents a technique to merge sounder and imager observations with the goal of maintaining the details offered by the imager's high spatial resolution and the accuracy offered by the sounder's spectral information. The technique involves deriving cloud temperatures from the sounder observations, interpolating the sounder temperatures to the imager pixels, and using the sounder temperatures as an additional constraint in the imager cloud height optimal estimation approach. This technique is demonstrated using collocated VIIRS and Cross-track Infrared Sounder (CrIS) observations with the impact of the sounder observations validated using coincident CALIPSO/CALIOP cloud heights These comparisons show significant improvement in the cloud heights for optically thin cirrus. The technique should be generally applicable to other imager/sounder pairs. [ABSTRACT FROM AUTHOR]

Sea salt aerosol in the boundary layer below shallow cumulus clouds is remotely observed with a Ka-band cloud radar at the Barbados Cloud Observatory and is detected in 76% of the measurements over 1 year. Carried by convection, sea salt particles with a diameter larger than 500 nm show an upward motion of 0.2 m s−1 below shallow cumulus clouds for a 2-day case study. Caused by an increasing relative humidity with increasing altitude, the sea salt particles become larger as they move closer to the cloud base. By using combined measurements of a Ka-band cloud radar and a Raman lidar, the retrieved equivolumetric diameter of the hygroscopically grown sea salt particles is found to be between 6 and 11 μm with a total number concentration of 20 cm−3 near cloud base. Assuming a fixed shape parameter, a size distribution of sea salt particles under high-relative-humidity conditions below cloud base is estimated and agrees with measurements taken by a dry-deposition sampler and online aerosol observations. The methods outlined in this paper can be used in future studies to get a better understanding of the vertical and temporal sea salt distribution in the boundary layer and sea salt aerosol–cloud interaction processes. [ABSTRACT FROM AUTHOR]

Rain gauges are considered the most accurate method to estimate rainfall and are used as the "ground truth" for a wide variety of applications. The spatial density of rain gauges varies substantially and hence influences the accuracy of gridded gauge-based rainfall products. The temporal changes in rain gauge density over a region introduce considerable biases in the historical trends in mean rainfall and its extremes. An estimate of uncertainty in gauge-based rainfall estimates associated with the nonuniform layout and placement pattern of the rain gauge network is vital for national decisions and policy planning in India, which considers a rather tight threshold of rainfall anomaly. This study examines uncertainty in the estimation of monthly mean monsoon rainfall due to variations in gauge density across India. Since not all rain gauges provide measurements perpetually, we consider the ensemble uncertainty in spatial average estimation owing to randomly leaving out rain gauges from the estimate. A recently developed theoretical model shows that the uncertainty in the spatially averaged rainfall is directly proportional to the spatial standard deviation and inversely proportional to the square root of the total number of available gauges. On this basis, a new parameter called the "averaging error factor" has been proposed that identifies the regions with large ensemble uncertainties. Comparison of the theoretical model with Monte Carlo simulations at a monthly time scale using rain gauge observations shows good agreement with each other at all-India and subregional scales. The uncertainty in monthly mean rainfall estimates due to omission of rain gauges is largest for northeast India (~4% uncertainty for omission of 10% gauges) and smallest for central India. Estimates of spatial average rainfall should always be accompanied by a measure of uncertainty, and this paper provides such a measure for gauge-based monthly rainfall estimates. This study can be further extended to determine the minimum number of rain gauges necessary for any given region to estimate rainfall at a certain level of uncertainty. [ABSTRACT FROM AUTHOR]

The Third Pole (TP) is experiencing rapid warming and is currently in its warmest period in the past 2,000 years. This paper reviews the latest development in multidisciplinary TP research associated with this warming. The rapid warming facilitates intense and broad glacier melt over most of the TP, although some glaciers in the northwest are advancing. By heating the atmosphere and reducing snow/ice albedo, aerosols also contribute to the glaciers melting. Glacier melt is accompanied by lake expansion and intensification of the water cycle over the TP. Precipitation has increased over the eastern and northwestern TP. Meanwhile, the TP is greening and most regions are experiencing advancing phenological trends, although over the southwest there is a spring phenological delay mainly in response to the recent decline in spring precipitation. Atmospheric and terrestrial thermal and dynamical processes over the TP affect the Asian monsoon at different scales. Recent evidence indicates substantial roles that mesoscale convective systems play in the TP's precipitation as well as an association between soil moisture anomalies in the TP and the Indian monsoon. Moreover, an increase in geohazard events has been associated with recent environmental changes, some of which have had catastrophic consequences caused by glacial lake outbursts and landslides. Active debris flows are growing in both frequency of occurrences and spatial scale. Meanwhile, new types of disasters, such as the twin ice avalanches in Ali in 2016, are now appearing in the region. Adaptation and mitigation measures should be taken to help societies' preparation for future environmental challenges. Some key issues for future TP studies are also discussed. [ABSTRACT FROM AUTHOR]

Monitoring changes of precipitation phase from space is important for understanding the mass balance of Earth's cryosphere in a changing climate. This paper examines a Bayesian nearest neighbor approach for prognostic detection of precipitation and its phase using passive microwave observations from the Global Precipitation Measurement (GPM) satellite. The method uses the weighted Euclidean distance metric to search through an a priori database populated with coincident GPM radiometer and radar observations as well as ancillary snow-cover data. The algorithm performance is evaluated using data from GPM official precipitation products, ground-based radars, and high-fidelity simulations from the Weather Research and Forecasting Model. Using the presented approach, we demonstrate that the hit probability of terrestrial precipitation detection can reach to 0.80, while the probability of false alarm remains below 0.11. The algorithm demonstrates higher skill in detecting snowfall than rainfall, on average by 10%. In particular, the probability of precipitation detection and its solid phase increases by 11% and 8%, over dry snow cover, when compared to other surface types. The main reason is found to be related to the ability of the algorithm in capturing the signal of increased liquid water content in snowy clouds over radiometrically cold snow-covered surfaces. [ABSTRACT FROM AUTHOR]

Doppler sodar is a technology used for acoustic-based remote sensing of the lower planetary boundary layer. Sodars are often used to measure wind profiles; however, they suffer from problems caused by noise (both acoustic and electrical) and echoes from fixed objects, which can bias radial velocity estimates. An experimental bistatic sodar was developed with 64 independent channels. The device enables flexible beamforming; beams can be tilted at the same angle irrelevant of frequency, a limitation in most commercial devices. This paper presents an alternative sodar signal-processing algorithm for wind profiling using a multifrequency stepped-chirp pulse. A noncoherent matched filter was used to analyze returned signals. The noncoherent matched filter combines radial velocity estimates from multiple frequencies into a single optimization. To identify and separate sources of backscatter, noise, and fixed echoes, a stochastic pattern-recognition technique, Gaussian mixture modeling, was used to postprocess the noncoherent matched filter data. This method allowed the identification and separation of different stochastic processes. After identification, noise and fixed echo components were removed and a clean wind profile was produced. This technique was compared with traditional spectrum-based radial velocity estimation methods, and an improvement in the rejection of fixed echo components was demonstrated; this is one of the major limitations of sodar performance when located in complex terrain and urban environments. [ABSTRACT FROM AUTHOR]

Atmospheric gravity waves are a kind of mesoscale disturbance, commonly found in the atmospheric system, that plays a key role in a series of mesospheric dynamic processes. When propagating to the upper atmosphere, the gravity waves will disturb the local temperature and density, and then modulate the intensity of the surrounding airglow radiation. As a result, the presence of gravity waves on a moonless night can usually cause the airglow to reveal ripple features in low-light images. In this paper we have applied a two-dimensional Stockwell transform technique (2DST) to airglow measurements from nighttime low-light images of the day–night band on the Suomi National Polar-Orbiting Partnership. To our knowledge this study is the first to measure localized mesospheric gravity wave brightness amplitudes, horizontal wavelengths, and propagation directions using such a method and data. We find that the method can characterize the general shape and amplitude of concentric gravity wave patterns, capturing the dominant features and directions with a good degree of accuracy. The key strength of our 2DST application is that our approach could be tuned and then automated in the future to process tens of thousands of low-light images, globally characterizing gravity wave parameters in this historically poorly studied layer of the atmosphere. [ABSTRACT FROM AUTHOR]

Accurate and automated dealiasing of radar data is important for data interpretation and downstream applications such as numerical weather prediction (NWP) models. In this paper an improved radial velocity dealiasing scheme is presented and evaluated using observations from several S-band radars under the severe weather conditions of typhoons and hurricanes. This scheme, named Automated Dealiasing for Typhoon and Hurricane (ADTH), is a further development of the China New Generation Doppler Weather Radar (CINRAD) improved dealiasing algorithm (CIDA). The upgraded algorithm ADTH includes three modules designed to select the first radial from which the dealiasing process starts, to conduct a two-way multipass dealiasing, and to perform an error check for a final local dealiasing. The dealiasing algorithm is applied to two typhoon hurricane cases and four typhoon cases observed with radars from CINRAD, NEXRAD of the United States, and the Taiwan radar network for a continuous period of 12 h for each of the selected cases. The results show that ADTH outperforms CIDA for all of the test cases. [ABSTRACT FROM AUTHOR]