Search

• BC/ZnO nanocomposite strengthens paper and improves aging resistance. • The nanocomposite imparts antifungal properties to paper. • The nanocomposite helps in deacidification of paper. Paper, commonly used as an information carrier, can become acidified and brittle over time. In this study, 0.3 % bacterial cellulose (BC) composite with 1.0% zinc oxide (ZnO) nanoparticles was prepared and used to coat brittle book paper for deacidification and consolidation. The BC/ZnO nanocomposite was characterized using zeta potential, micro morphology, elemental mapping, X-ray photoelectron spectra, Fourier transform infrared, and thermogravimetric analyses. The results indicated that the composite exhibited good stability. ZnO nanoparticles were bonded to the hydroxyl groups on BC, enhancing the thermal stability of BC. The composite was uniformly sprayed on the paper surface, and the mechanical properties, color difference, readability, pH, and micromorphology of the paper samples were examined before and after the treatment. The BC/ZnO nanocomposite exhibited good deacidification and consolidation effects on paper samples with low impact on the original paper appearance. Moreover, the BC/ZnO nanocomposite showed a good inhibitory effect on fungi growth on paper. [ABSTRACT FROM AUTHOR]

[Display omitted] • Sonication improves the absorption of metallic salt in the paper. • Ultrasound catalyzes the synthesis of metallic nanoparticles. • A longer sonication time during salt absorption increases the number of nanoparticles obtained. • Nanoparticles obtained by sonochemistry are an easy and reproducible method to modify paper. This work focuses on a systematic method to produce Ag, Cu, and Ag/Cu metallic nanoparticles (MNPs) in situ assisted with ultrasound on cellulose paper. By tuning the concentration of AgNO 3 and CuSO 4 salt precursors and ultrasound time, combined with a fixed concentration of ascorbic acid (AA) as a reducing agent, it was possible to control the size, morphology, and polydispersity of the resulting MNPs on cellulose papers. Notably, high yield and low polydispersity of MNPs and bimetallic nanoparticles are achieved by increasing the sonication time on paper samples pre-treated with salt precursors before reduction with AA. Moreover, mechanical analysis on paper samples presenting well-dispersed and distributed MNPs showed slightly decreasing values of Young's modulus compared to neat papers. The strain at break is substantially improved in papers containing solely Ag or Cu MNPs. The latter suggests that the elastic/plastic transition and deformation of papers are tuned by cellulose and MNPs interfacial interaction, as indicated by mechanical analysis. The proposed method provides insights into each factor affecting the sonochemistry in situ synthesis of MNPs on cellulose papers. In addition, it offers a straightforward alternative to scale up the production of MNPs on paper, ensuring an eco-friendly method. [ABSTRACT FROM AUTHOR]

Monodisperse aqueous upconverting nanoparticles (UCNPs) were covalently immobilized on aldehyde modified cellulose paper via reductive amination to evaluate the multiplexing capacity of luminescence resonance energy transfer (LRET) between UCNPs and quantum dots (QDs). This is the first account of a multiplexed bioassay strategy that demonstrates the principle of use of a single form of UCNP as donor and three different color emitting QDs as acceptors to concurrently determine three analytes. Broad absorbance profiles of green, orange and red QDs that spanned from the first exciton absorption peak to the UV region were in overlap with a blue emission band from UCNPs composed of NaYF 4 that was doped with 30% Yb 3+ , 0.5% Tm 3+ , allowing for LRET that was stimulated using 980 nm near-infrared radiation. The characteristic narrow and well-defined emission peaks of UCNPs and QDs allowed for the collection of luminescence from each nanoparticle using a band-pass optical filter and an epi-fluorescence microscope. The LRET system was used for the concurrent detection of uidA, Stx1A and tetA gene fragments with selectivity even in serum samples, and reached limits of detection of 26 fmol, 56 fmol and 76 fmol, respectively. [ABSTRACT FROM AUTHOR]

A severe decay process, catalyzed by acidity and metal ions, affects cellulose in historical manuscripts and books that contain iron gall inks. The inhibition of this process can be achieved by alkaline-earth nanoparticles dispersions in alcohols, which create a neutral environment in which both oxidation and depolymerization of cellulose are hindered. As a result of the degradation process, paper in historical manuscripts and books is fragile and very difficult to handle. A reinforcement intervention with gelatin and Japanese tissue could be used for the strengthening of historical manuscripts, even if this method could not prevent paper degradation due to iron gall inks. Therefore, a new method, combining a deacidification treatment based on calcium hydroxide nanoparticles and a reinforcement process using Japanese tissue has been developed and tested on mockups containing iron gall inks. The protective action arising from the combined treatment was evaluated by performing cellulose viscosimetric degree of polymerization (DPv) and pH measurements on artificially aged systems. Scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM-EDX) was used for the evaluation of calcium distribution from the deacidification agent within samples cross section. Determinations of DPv clearly showed that the degradation of untreated inked paper was significantly slowed down by the combined treatment. The method was also tested on original manuscripts from 16th and 18th century. SEM-EDX maps showed that the applied treatment, which raised the pH to an appropriate value, is homogenously distributed over the treated surfaces. [ABSTRACT FROM AUTHOR]

Cellulosic nanomaterials are in the focus of academia and industry to realize light-weight biobased materials with remarkable strength. While the effect is well known, the distribution of these nanomaterials are less explored, particularly for paper sheets. Here, we explore the 3D distribution of micro and nanosized cellulosic particles in paper sheets and correlate their extent of fibrillation to the distribution inside the sheets and subsequently to paper properties. To overcome challenges with contrast between the particles and the matrix, we attached probes on the cellulose nano/microparticles, either by covalent attachment of fluorescent dyes or by physical deposition of cobalt ferrite nanoparticles. The increased contrast enabled visualization of the micro and nanosized particles inside the paper matrix using multiphoton microscopy, X-ray microtomography and SEM-EDX. The results indicate that fibrillary fines enrich at pores and fiber-fiber junctions, thereby increasing the relative bonded area between fibers to enhance paper strength while CNF seems to additionally form an inner 3D network. [ABSTRACT FROM AUTHOR]