Search

The size-exclusion separation of a water-soluble polyelectrolyte polymer, sodium polystyrene sulfonate (NaPSS), was demonstrated on common reversed-phase (C 18, C 4 , phenyl, and cyano) and hydrophilic interaction chromatography (HILIC) columns. The effect of common solvents – acetonitrile (ACN), tetrahydrofuran (THF), and methanol (MeOH), used as mobile phase modifiers – on the elution of NaPSS and the effect of column temperature (within a relatively narrow range corresponding to typical chromatographic conditions, i.e. , 10 °C–60 °C) on the partition coefficient, K S E C , were also investigated. Non-size-exclusion chromatography (non-SEC) effects can be minimized by the addition of an electrolyte and an organic modifier to the mobile phase, and by increasing the column temperature ( e.g., to 50 °C or 60 °C). Strong solvents such as THF and ACN are more successful in the reduction of such effects than is the weaker solvent MeOH. The best performance is seen on medium polarity and polar stationary phases, such as cyanopropyl- and diol-modified silica (HILIC), where the elution of the NaPSS polyelectrolyte is by a near-ideal SEC mechanism. Hydrophobic stationary phases, such as C 18 , C 4 , and phenyl, require a higher concentration of a strong solvent modifier (THF) in the mobile phase to reduce non-SEC interactions of the solute with the stationary phase. [ABSTRACT FROM AUTHOR]

Described as intrinsically powerful building blocks for two-dimensional separations by Giddings [Anal. Chem., 56 (1984) 1258A–1270A], the coupling of chromatography and electrophoresis has been proven to enhance the resolution of a wide array of molecules in complex biological, environmental and food samples. This review provides a comprehensive overview of multidimensional chromato-electrophoretic (LC - E) and electrophero-chromatographic (E - LC) separation systems from inception to the most recent published examples. LC separation modes include reversed phase, ion exchange, and size exclusion. Electromigration separation modes include capillary, microchip or free flow electrophoresis; micellar electrokinetic chromatography; electrochromatography; and isoelectric focusing. The advantages and disadvantages of various non-gel based off-line and on-line hyphenation technologies of LC - E and E - LC are discussed, with conditions and system characteristics also provided. [ABSTRACT FROM AUTHOR]

Dual-opposite-injection capillary electrophoresis (DOI-CE) is a separation technique that utilizes both ends of the capillary for sample introduction. Depending on the individual electrophoretic mobilities of the analytes of interest and the migration distance that each analyte travels to the detection window, the elution order of analytes in a DOI-CE separation can vary widely. One consequence of a variable elution order is that co-detection of oppositely charged analytes becomes possible under certain experimental conditions. While several approaches currently exist to avoid co-detection, they are often time consuming and inefficient. This paper describes a systematic approach to easily avoid co-detection by analyzing the net mobilities of the analytes of interest to aid in choosing appropriate capillary lengths for a particular separation. Simulated electropherograms that highlight various aspects of this new approach are shown. An electropherogram from the literature is replicated and the derived relationship is applied to show the potential advantages of this new approach. [ABSTRACT FROM AUTHOR]

Highlights: [•] Oligonucleotide analysis by ion-pair reversed-phase liquid chromatography. [•] Evaluation of a core–shell C18 column for improved separation of oligonucleotides. [•] Long-term column stability test at pH 7 mobile phase and high column temperature. [•] Evaluation of SunShell C18 column showed the column remained stable after more than 300 injections. [ABSTRACT FROM AUTHOR]

• Developed a workflow to prioritize single and tandem-column pairs for RPLC separations. • Separation predictions based upon hydrophobic subtraction model (HSM) parameters. • Methodology applied to separation of Linrodostat and 10 related impurities. • Prediction of potentially successful columns greatly simplifies method development. • For the Linrodostat study, tandem-column LC outperformed single column LC under HSM conditions. The liquid chromatography (LC) analysis of small molecule pharmaceutical compounds and related impurities is crucial in the development of new drug substances, but developing these separations is usually challenging due to analyte structural similarities. Tandem-column LC (TC-LC) has emerged as a powerful approach to achieve alternative separation selectivity compared to conventional single column separations. However, one of the bottlenecks associated with use of tandem column approaches is time-consuming column pair screening and selection. Herein, we compared critical resolution (R c) in single column vs. TC-LC separations for a given set of small molecule pharmaceutical compounds and developed a column selection workflow that uses separation simulations based on parameters from the hydrophobic subtraction model (HSM) of reversed-phase selectivity. In this study, HSM solute parameters were experimentally determined for a small molecule pharmaceutical (Linrodostat) and ten of its related impurities using multiple linear regression of their retentions on 16 selected RPLC columns against in-house determined HSM column parameters. R c values were calculated based on HSM database column parameters for a pool of about 200 available stationary phases in both single-phase column (2.1 mm i.d. × 100 mm) or tandem column paired (two 2.1 mm i.d. × 50 mm) formats. Four column configurations (two single and two tandem) were predicted to achieve successful separations under isocratic HSM separation conditions, with a fifth tandem pair predicted to have a single co-elution. Of these five potential candidates, one tandem pair yielded compete baseline resolution of the 11-component mixture in an experimental separation. In this specific case, the tandem column pairs outperformed single-phase columns, with better predicted and experimental R c values for the Linrodostat mixture under the HSM separation conditions. The results reported in this study demonstrated the enormous selectivity potential of TC-LC in pharmaceutical compound separations and are consistent with our previous study that examined the potential of tandem column approaches using purely computational means, though there is room for substantial improvement in the prediction accuracy. The proposed workflow can be used to prioritize a small number of column combinations by computational means before any experiments are conducted. This is highly attractive from the point of view of time and resource savings considering over 200,000 different tandem column pairings are possible using columns for which there are data in the HSM database. [Display omitted] [ABSTRACT FROM AUTHOR]