Search

• A thin-film lithium niobate TM-pass waveguide polarizer is proposed. • Subwavelength grating metamaterial for polarization generation. • Simulation shows that the device can operate with a bandwidth ∼415 nm. • The device shows reasonable extinction ratio and insertion loss. An ultra-broadband TM-pass waveguide polarizer based on thin-film LiNbO 3 -on-insulator waveguide and subwavelength grating (SWG) metamaterials is proposed and modeled. The device consists of an SWG in the central part and two coupling regions in the input and output sides. The SWG, formed by a series of bending nano-stripes, functions as a filter of polarization, and the two coupling regions serve to degrade mode mismatch loss. By tailoring the duty cycle of the SWG metamaterial, the SWG structure supports only the TM guided mode, while the TE guided mode is cutoff and thus filtered out. Simulation shows that, with a SWG meta-material formed by a series of 90°-bending nano-stripes, the polarizer can achieve an ultra-large bandwidth of ∼415 nm (1.26–1.675 μm) with an insertion loss < 1.1 dB and an extinction ratio > 29.4 dB. Moreover, the proposed polarizer tolerates a 5 nm deviation in both width and thickness of the nano-stripes. Such an ultra-broadband device may find its use in high-capacity optical communication systems, and is proposed firstly on the basis of the lithium-niobate-on-insulator platform, to the best of our knowledge. [ABSTRACT FROM AUTHOR]

• Polarization beam splitter based on LNOI triple-waveguide coupler is proposed. • α-Si nanostrip is used to manipulate the coupling of TM polarization mode. • Higher polarization extinction ratio and lower insertion loss are achieved. • The device is compact and suitable for on-chip applications. • A larger feature size (∼200 nm) that facilitates fabrication is involved. Polarization beam splitter (PBS) is a fundamental component of integrated photonics to manipulate wave polarization state, and most PBS devices were designed on the popular SOI. As an alternative, a PBS may be implemented on the basis of thin-film LiNbO 3 -on-insulator (LNOI), a promising platform for developing various compact or ultra-compact photonic active and passive devices. However, smaller modal birefringence of the LNOI waveguide makes it not easy to implement a PBS of high-performance. Here, we propose a compact, high-performance PBS on the basis of a triple-waveguide coupler consisted of two LNOI ridge waveguides and an amorphous silicon (α-Si) nanostrip assisted waveguide. By making use of the α-Si nanostrip, the PBS works in the case that the TM polarization mode meets the phase matching condition while the TE polarization mode does not. Numerical results show that the PBS is compact with a length of only 31 μm. The device can achieve an ultra-high polarization extinction ratio (>29.4 dB) and an ultra-low insertion loss (<0.066 dB) in the operating wavelength range of 1500–1600 nm for the TE polarization mode, and a polarization extinction ratio of > 20 dB and an insertion loss of < 0.16 dB over a ∼ 60 nm bandwidth from 1527 nm to 1587 nm for the TM polarization mode. Moreover, the device has a larger feature size that facilitates fabrication. Overall, this device has the advantages of compact size, higher polarization extinction ratio, lower insertion loss, and larger feature size, which is suitable for on-chip applications. [ABSTRACT FROM AUTHOR]

• Photonic hooks (PHs) array generated by a multi–dielectric structure is studied. • PHs formation is ascribed to optical inhomogeneity of multi-dielectric structure. • PHs performance can be effectively tailored by geometric and optical parameters. • Both 1D and 2D PHs arrays bent outward or inward can be generated. • Both 1D and 2D PHs arrays show application potential in field of 3D manipulation. Generation of array of photonic hooks (PHs) by a multi–dielectric structure that consists of periodically arrayed scatterer units has been systematically studied. The study focuses on the effects of geometric and optical parameters of the multi–dielectric structure on the characteristics of generated PHs, especially their bending angles. These geometric and optical parameters include size, shape, refractive index and number of scatterer units, and their adjacent spacing. The results show that the spacing, size and refractive index play a predominant role in tailoring the performance of the PHs array, and the spacing affects mainly the characteristics of a pair of symmetrical PHs while the size and refractive index differences between scatterer units affect mainly those of asymmetrical PHs as a result of the introduction of optical inhomogeneity. In the aspect of scatterer shape, for a multi–dielectric structure that consists of some cylinders, as the light wave is incident parallel (perpendicular) to the cylinder axis, its scattering characteristics are similar to those of the multi–dielectric structure that consists of some cuboids (spheres). In particular, for a structure consisted of cylinders or cuboids with long length in the z direction, an intensive photonic nanojet is additionally generated and located between the paired PHs provided that the wave is incident perpendicular to the cylinder axis or the longest side of cuboid. In the aspect of scatterer unit number, the multi–dielectric structures of odd and even scatterer units generate PHs with different characteristics. The paired PHs generated by multi–dielectric structure with equal spacings always bend outward. However, the paired PHs may bend inward provided that the multi–dielectric structure is designed properly. We have also studied the features of 2D PHs array. The results show that the 2D PHs array displays similar features to the 1D case. The application potential of both 1D and 2D PHs arrays is evaluated. [ABSTRACT FROM AUTHOR]

• A TM-pass polarizer based on an air-slot embedded TFLNOI waveguide is proposed. • Designed structure supports only a TM mode while TE mode being in cut-off state. • A symmetric tetragonal dipyramid air-slot is designed to degrade insertion loss. • Both slot geometry and silica thickness take effects on polarization performance. • Optimal device shows good performance and ultra-compactness valid for on-chip use. An air-slot assisted TM-pass waveguide polarizer based on thin-film lithium niobate on insulator (TFLNOI) is proposed. It consists of a segment of ridge-type TFLNOI single-mode strip waveguide and an embedded air-slot. The air-slot has a symmetric tetragonal dipyramid structure consisted of a cuboid in the central part and two identical tetragonal pyramids in two sides, which function as polarization generation and adiabatic approximation to degrade insertion loss, respectively. Waveguide properties and transmission characteristics of the device were simulated using finite difference method. The results show that the waveguide structure with a properly designed geometry supports only a TM mode, while does not the TE mode, which is cut-off in the cuboid air-slot region. Slot length, width and silica substrate thickness all take considerable effects on the insertion loss and extinction ratio. Qualitative and comprehensible explanations are given for the effects. An optimized polarizer has been suggested that exhibits excellent polarization performance, including a larger extinction ratio of 28.4 dB, a lower insertion loss of 0.29 dB, and a broader bandwidth of ∼110 nm (1490–1600 nm) with an extinction ratio >20 dB and an insertion loss <0.5 dB. In addition, the proposed device has a length of only 13 µm satisfying on-chip use. [ABSTRACT FROM AUTHOR]