Search

Deadbeat predictive current control (DPCC) can predict motor behavior based on SPMSM model. However, during the operation of motor system, motor parameters (such as stator inductance and flux linkage) vary frequently according to different working conditions, which may lead to controller parameter mismatch, causing current harmonic content to increase and efficiency to decrease. In order to solve these problems caused by parameter variation, first, this paper proposes a current prediction error model by considering uncertainties of model parameters. Second, stator inductance and flux linkage are decoupled based on current prediction error model, which can reduce the interaction between parameters. Finally, the Kalman Filter (KF) algorithm is presented to filter the decoupled parameters. It is shown that the stator inductance and flux linkage can be identified accurately and the complexity of computation can be simplified. The traditional DPCC method, Extended Kalman Filter (EKF) based DPCC method and the proposed DPCC method are comparatively analyzed in this paper. Simulation and experiment indicate that the proposed parameter decoupling identification method can effectively reduce current harmonic content, current fluctuation and current tracking errors caused by parameter mismatch. [ABSTRACT FROM AUTHOR]

The Internet of vehicles (IoV) is a large information interaction network that collects information on vehicles, roads and pedestrians. One of the important uses of vehicle networks is to meet the entertainment needs of driving users through communication between vehicles and roadside units (RSUs). Due to the limited storage space of RSUs, determining the content cached in each RSU is a key challenge. With the development of 5G and video editing technology, short video systems have become increasingly popular. Current widely used cache update methods, such as partial file precaching and content popularity- and user interest-based determination, are inefficient for such systems. To solve this problem, this paper proposes a QoE-driven edge caching method for the IoV based on deep reinforcement learning. First, a class-based user interest model is established. Compared with the traditional file popularity- and user interest distribution-based cache update methods, the proposed method is more suitable for systems with a large number of small files. Second, a quality of experience (QoE)-driven RSU cache model is established based on the proposed class-based user interest model. Third, a deep reinforcement learning method is designed to address the QoE-driven RSU cache update issue effectively. The experimental results verify the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Addressing non-convexity plays a fundamental role in solving the optimal electricity-gas flow models. In this paper, an improved spatial branch-and-bound algorithm is proposed to solve the non-convex problem, which is formulated as a mixed-integer bilinear programming, for its exact solution. The core of the algorithm is to divide the non-convex model into convex and small sub-models by branching on specific continuous variables, so that the non-convex problem can be equivalent to a rooted tree for exploration. The exactness of the algorithm is guaranteed by the same criterion as the classical branch-and-bound algorithm. To alleviate the computational burden, a novel two-stage spatial branching strategy is developed to improve the effectiveness and efficiency of the branching operations. The performance of the proposed algorithm is verified on two integrated electricity-gas systems with different sizes. Numerical results demonstrate that our method achieves a balance among feasibility, optimality, and efficiency. The comparison with another 6 convexification-based methods, 3 state-of-the-art non-convex optimization solvers, and 2 spatial branch-and-bound algorithms with classical branching rules further shows the superiority of our algorithm. [ABSTRACT FROM AUTHOR]

In this paper, we propose to extend the standard Convolutional Dictionary Learning problem to a tensor representation where the activations are constrained to be “low-rank” through a Canonical Polyadic decomposition. We show that this additional constraint increases the robustness of the CDL with respect to noise and improve the interpretability of the final results. In addition, we discuss in detail the advantages of this representation and introduce two algorithms, based on ADMM or FISTA, that efficiently solve this problem. We show that by exploiting the low rank property of activations, they achieve lower complexity than the main CDL algorithms. Finally, we evaluate our approach on a wide range of experiments, highlighting the modularity and the advantages of this tensorial low-rank formulation. [ABSTRACT FROM AUTHOR]

The integration of the variable renewable energies makes the operation conditions of the power system ever-changeable. Consequently, the power system operational reliability evaluation is increasingly important. This paper introduces the concept of decision-dependent uncertainty (DDU) in the operational reliability evaluation. Unlike the exogenous uncertainties, DDU reveals that the decisions of the system operation could significantly affect the resolution of the uncertainties which influence the reliability metrics. In this paper, the proposed DDU modeling method links the device reliability indices, i.e., the forced outage rate, and the operational-decision variables. The impacts of DDU on operational reliability are analyzed based on a reliability-constrained stochastic unit commitment (UC) model. An adaptive reliability improvement UC (ARIUC) algorithm is proposed to efficiently solve the problem. Case studies underline the necessity of considering DDU in power system operational reliability evaluations. [ABSTRACT FROM AUTHOR]

Stochastic unit commitment is an efficient method for grid operation in the presence of significant uncertainties. An example is an operation during a predicted hurricane with uncertain line out-ages. However, the solution quality comes at the cost of substantial computational burden, which makes its adoption challenging. This paper evaluates some possible ways that machine learning can be used to reduce this computational burden. First, a set of feasibility studies is conducted. Results suggest that using machine learning as an assistant to the stochastic unit commitment solver is more advantageous than using it as a standalone solver. In particular, the machine learning model is trained to facilitate solving the problem by determining the unnecessary constraints that can be removed from the original problem without affecting the final accuracy. The variables that can be used as input features/predictors or outputs for the machine learning model are determined through feasibility studies. Then, an algorithm to train and utilize a machine learning model is proposed. The method is tested on a 500-bus synthetic South Carolina system. Various test cases show an average reduction in solution time by more than 90% by using the trained machine learning model to assist the stochastic unit commitment solver. [ABSTRACT FROM AUTHOR]

With the proliferation of distributed generators and energy storage systems, traditional passive consumers in power systems have been gradually evolving into the so-called “prosumers,” i.e., proactive consumers, which can both produce and consume power. To encourage energy exchange among prosumers, energy sharing is increasingly adopted, which is usually formulated as a generalized Nash game (GNG). In this paper, a distributed approach is proposed to seek the Generalized Nash equilibrium (GNE) of the energy sharing game. To this end, we first prove the strong monotonicity of the game. Then, the GNG is converted into an equivalent optimization problem. An algorithm based on Nesterov's methods is thereby devised to solve the equivalent problem and consequently find the GNE in a distributed manner. The convergence of the proposed algorithm is proved rigorously based on the nonexpansive operator theory. The performance of the algorithm is validated by experiments with three prosumers, and the scalability is tested by simulations using 1888 prosumers. [ABSTRACT FROM AUTHOR]

To meet the execution requirements of delay-sensitive services in vehicular edge computing (VEC) networks, vehicular services need to be offloaded to edge computing nodes. For complex, large-scale services, the services need to be migrated if the services are not completed before the vehicles leave the coverage of edge computing nodes. Trust and resource matching between areas thus become major problems. This paper studies the decision model of vehicular service offloading and migration. First, software-defined network (SDN) technology is introduced into the traditional network architecture, and a two-layer distributed SDN-controlled VEC network architecture is designed, which is divided into a domain control layer and an area control layer. In this framework, we use the consortium blockchain as a carrier to share network topology information between SDN controllers to prevent information leakage. We then established a service offloading and migration optimization problem model to minimize service execution delay, reduce energy consumption and maximize the throughput of the blockchain system. We describe the problem model as a Markov Decision Process (MDP), introduce a deep reinforcement learning (DRL) algorithm named asynchronous advantage actor-critic (A3C) and design a dynamic service offloading and migration algorithm (DSOMA) based on A3C to solve the problem. Simulation results show that DSOMA can increase the throughput of the blockchain system, and DSOMA is superior to the deep Q-learning (DQN) algorithm and greedy offloading algorithm in reducing service execution delay and system energy consumption. [ABSTRACT FROM AUTHOR]

In many practical engineering applications, the number of actions that have been finished should be known, particularly for an untrimmed video sequence that includes an event with a series of actions, it is important to know the number of actions that have been finished. In this paper, we termed this process as visual event progress estimation (EPE). However, the research related to this problem is few in the research community. To solve this problem, a visual human action analysis-based framework, namely one-shot simultaneously action detection and identification (SADI)-EPE, is presented in this paper. The visual EPE is modeled as an online one-shot learning-based problem; sliding window and attention-based bag of key poses formulate our framework. Unlike most of the action analysis methods relying on a number of training data of some predefined classes, our method can realize SADI for any event if one sample of the event is given, which makes it feasible for practical applications. At the same time, not only SADI but also the progress estimation of the event can be realized by our algorithm. In terms of methodology, the key pose is defined by an invariant pose descriptor from skeletal data and silhouette data. Moreover, in order to extract representative and discriminative poses from one training sample, we present a new bidirectional $k$ NN-based attention weighted key pose selection method, which can filter the unrelated actions and model different importance of various key poses. In addition, an attention-based multi-modal fusion scheme, which addresses the difficulty of high-dimensional features and few training samples, is proposed to augment the performance of our algorithm. Finally, we propose an evaluation criterion for the estimation problem. Extensive results demonstrated the efficacy of our proposed framework. [ABSTRACT FROM AUTHOR]

Nonlinear optimization problems with dynamical parameters are widely arising in many practical scientific and engineering applications, and various computational models are presented for solving them under the hypothesis of short-time invariance. To eliminate the large lagging error in the solution of the inherently dynamic nonlinear optimization problem, the only way is to estimate the future unknown information by using the present and previous data during the solving process, which is termed the future dynamic nonlinear optimization (FDNO) problem. In this paper, to suppress noises and improve the accuracy in solving FDNO problems, a novel noise-tolerant neural (NTN) algorithm based on zeroing neural dynamics is proposed and investigated. In addition, for reducing algorithm complexity, the quasi-Newton Broyden–Fletcher–Goldfarb–Shanno (BFGS) method is employed to eliminate the intensively computational burden for matrix inversion, termed NTN-BFGS algorithm. Moreover, theoretical analyses are conducted, which show that the proposed algorithms are able to globally converge to a tiny error bound with or without the pollution of noises. Finally, numerical experiments are conducted to validate the superiority of the proposed NTN and NTN-BFGS algorithms for the online solution of FDNO problems. [ABSTRACT FROM AUTHOR]

As an emulous alternative to deep neural networks, Deep Forest emerges with features like low complexity, fewer hyper-parameters, and good robustness, which are predominantly desired in distributed computing applications and ecosystems. Recently, an efficient distributed Deep Forest system, named ForestLayer, was proposed, designing a fine-grained sub-Forest-based task-parallel algorithm to improve the parallel computing efficiency of Deep Forest. However, the sub-Forest splitting of ForestLayer is static and one-off without adaptability to the computing environment, nevertheless, the size of splitting granularity has a significant impact on the system performance. To further improve the computing efficiency and scalability of the distributed Deep Forest, in this paper, we propose a novel distributed Deep Forest algorithm, named BLB-gcForest (Bag of Little Bootstraps-gcForest), which augments the gcForest (multi-Grained Cascade Forest) approach for constructing Deep Forest. BLB-gcForest carries out parallel computation for each tree in sub-Forests at a finer parallel granularity and integrates with the Bag of Little Bootstraps (BLB) mechanism to reduce massive transmitted feature instances for Cascade Forest Layers, utterly improving both computation efficiency and communication efficiency. Moreover, to solve the problem of the forest splitting granularity, we further design an adaptive sub-Forest splitting algorithm to ensure the maximum resource utilization for parallel computation of each sub-Forest. Experimental results on four well-known large-scale datasets, namely YEAST, LETTER, MNIST, CIFAR10, show that the training efficiency of BLB-gcForest achieves up to 20.3x and 1.64x speedups compared with the state-of-the-art gcForest and ForestLayer, respectively while guaranteeing higher accuracy and better robustness [ABSTRACT FROM AUTHOR]

In this paper, we consider a computation offloading problem in a three-tier network consisting of multiple mobile users (MUs), multiple edge clouds, and a central cloud. On this basis, we formulate a system Energy Time Cost ($ETC$) minimization problem by jointly optimizing the resource allocation, mobile-edge matching decision, and offloading decision. Due to the difficulty of directly solving the formulated problem, we decompose it and propose two offloading algorithms, namely Gale-Shapley based Minimum/Sequential Offloading Algorithm (GS-MOA/GS-SOA), to optimize offloading decisions by minimizing the system $ETC$ , in which the mobile-edge matching strategies based on the proposed Gale-Shapley based Mobile-Edge mAtching aLgorithm (GS-MEAL) and resource allocations are optimized iteratively. The simulations show the effectiveness of our proposed algorithm. [ABSTRACT FROM AUTHOR]

In this paper, we consider the coordinated multipoint (CoMP) transmission design for the downlink cloud radio access network (Cloud-RAN). Our design aims to optimize the set of remote radio heads (RRHs) serving each user and the precoding and transmission power to minimize the total transmission power while maintaining the fronthaul capacity and users' quality-of-service (QoS) constraints. The fronthaul capacity constraint involves a nonconvex and discontinuous function that renders the optimal exhaustive search method unaffordable for large networks. To address this challenge, we propose two low-complexity algorithms. The first pricing-based algorithm solves the underlying problem through iteratively tackling a related pricing problem while appropriately updating the pricing parameter. In the second iterative linear-relaxed algorithm, we directly address the fronthaul constraint function by iteratively approximating it with a suitable linear form using a conjugate function and solving the corresponding convex problem. For performance evaluation, we also compare our proposed algorithms with two existing algorithms in the literature. Finally, extensive numerical results are presented, which illustrate the convergence of our proposed algorithms and confirm that our algorithms significantly outperform the state-of-the-art existing algorithms. [ABSTRACT FROM PUBLISHER]

Weighted multi-view clustering (MVC) aims to combine the complementary information of multi-view data (such as image data with different types of features) in a weighted manner to obtain a consistent clustering result. However, when the cluster-wise weights across views are vastly different, most existing weighted MVC methods may fail to fully utilize the complementary information, because they are based on view-wise weight learning and can not learn the fine-grained cluster-wise weights. Additionally, extra parameters are needed for most of them to control the weight distribution sparsity or smoothness, which are hard to tune without prior knowledge. To address these issues, in this paper we propose a novel and effective Cluster-weighted mUlti-view infoRmation bottlEneck (CURE) clustering algorithm, which can automatically learn the cluster-wise weights to discover the discriminative clusters across multiple views and thus can enhance the clustering performance by properly exploiting the cluster-level complementary information. To learn the cluster-wise weights, we design a new weight learning scheme by exploring the relation between the mutual information of the joint distribution of a specific cluster (containing a group of data samples) and the weight of this cluster. Finally, a novel draw-and-merge method is presented to solve the optimization problem. Experimental results on various multi-view datasets show the superiority and effectiveness of our cluster-wise weighted CURE over several state-of-the-art methods. [ABSTRACT FROM AUTHOR]

Source localization and spectral estimation are among the most fundamental problems in statistical and array signal processing. Methods that rely on the orthogonality of the signal and noise subspaces, such as Pisarenko's method, MUSIC, and root-MUSIC, are some of the most widely used algorithms to solve these problems. As a common feature, these methods require both a priori knowledge of the number of sources and an estimate of the noise subspace. Both requirements are complicating factors to the practical implementation of the algorithms and, when not satisfied exactly, can potentially lead to severe errors. In this paper, we propose a new localization criterion based on the algebraic structure of the noise subspace that is described for the first time to the best of our knowledge. Using this criterion and the relationship between the source localization problem and the problem of computing the greatest common divisor (GCD), or more practically approximate GCD, for polynomials, we propose two algorithms, which adaptively learn the number of sources and estimate their locations. Simulation results show a significant improvement over root-MUSIC in challenging scenarios such as closely located sources, both in terms of detection of the number of sources and their localization over a broad and practical range of signal-to-noise ratios. Furthermore, no performance sacrifice in simple scenarios is observed. [ABSTRACT FROM AUTHOR]

Estimating set similarity and detecting highly similar sets are fundamental problems in areas such as databases and machine learning. MinHash is a well-known technique for approximating Jaccard similarity of sets and has been successfully used for many applications. Its two compressed versions, $b$ b -bit MinHash and Odd Sketch, can significantly reduce the memory usage of the MinHash, especially for estimating high similarities (i.e., similarities around 1). Although MinHash can be applied to static sets as well as streaming sets, of which elements are given in a streaming fashion, unfortunately, $b$ b -bit MinHash and Odd Sketch fail to deal with streaming data. To solve this problem, we previously designed a memory-efficient sketch method, MaxLogHash, to accurately estimate Jaccard similarities in streaming sets. Compared with MinHash, our method uses smaller sized registers (each register consists of less than 7 bits) to build a compact sketch for each set. In this paper, we further develop a faster method, MaxLogOPH++. Compared with MaxLogHash, MaxLogOPH++ reduces the time complexity for updating each coming element from $O(k)$ O (k) to $O(1)$ O (1) with a small additional memory. We conduct experiments on a variety of datasets, and experimental results demonstrate the efficiency and effectiveness of our methods. [ABSTRACT FROM AUTHOR]

The nonlinear programming (NLP) problem to solve distribution-level optimal power flow (D-OPF) poses convergence issues and does not scale well for unbalanced distribution systems. The existing scalable D-OPF algorithms either use approximations that are not valid for an unbalanced power distribution system, or apply relaxation techniques to the nonlinear power flow equations that do not guarantee a feasible power flow solution. In this paper, we propose scalable D-OPF algorithms that simultaneously achieve optimal and feasible solutions by solving multiple iterations of approximate, or relaxed, D-OPF subproblems of low complexity. The first algorithm is based on a successive linear approximation of the nonlinear power flow equations around the current operating point, where the D-OPF solution is obtained by solving multiple iterations of a linear programming (LP) problem. The second algorithm is based on the relaxation of the nonlinear power flow equations as conic constraints together with directional constraints, which achieves optimal and feasible solutions over multiple iterations of a second-order cone programming (SOCP) problem. It is demonstrated that the proposed algorithms are able to reach an optimal and feasible solution while significantly reducing the computation time as compared to an equivalent NLP D-OPF model for the same distribution system. [ABSTRACT FROM AUTHOR]

Blind motion deblurring from a single image is a highly under-constrained problem with many degenerate solutions. A good approximation of the intrinsic image can, therefore, only be obtained with the help of prior information in the form of (often nonconvex) regularization terms for both the intrinsic image and the kernel. While the best choice of image priors is still a topic of ongoing investigation, this research is made more complicated by the fact that historically each new prior requires the development of a custom optimization method. In this paper, we develop a stochastic optimization method for blind deconvolution. Since this stochastic solver does not require the explicit computation of the gradient of the objective function and uses only efficient local evaluation of the objective, new priors can be implemented and tested very quickly. We demonstrate that this framework, in combination with different image priors produces results with Peak Signal-to-Noise Ratio (PSNR) values that match or exceed the results obtained by much more complex state-of-the-art blind motion deblurring algorithms. [ABSTRACT FROM PUBLISHER]

With growth in the number of smart devices and advancements in their hardware, in recent years, data-driven machine learning techniques have drawn significant attention. However, due to privacy and communication issues, it is not possible to collect this data at a centralized location. Federated learning is a machine learning setting where the centralized location trains a learning model over remote devices. Federated learning algorithms cannot be employed in the real world scenarios unless they consider unreliable and resource-constrained nature of the wireless medium. In this paper, we propose a federated learning algorithm that is suitable for cellular wireless networks. We prove its convergence, and provide a sub-optimal scheduling policy that improves the convergence rate. We also study the effect of local computation steps and communication steps on the convergence of the proposed algorithm. We prove, in practice, federated learning algorithms may solve a different problem than the one that they have been employed for if the unreliability of wireless channels is neglected. Finally, through numerous experiments on real and synthetic datasets, we demonstrate the convergence of our proposed algorithm. [ABSTRACT FROM AUTHOR]

Face Super-Resolution (FSR) aims to infer High-Resolution (HR) face images from the captured Low-Resolution (LR) face image with the assistance of external information. Existing FSR methods are less effective for the LR face images captured with serious low-quality since the huge imaging/degradation gap caused by the different imaging scenarios (i.e., the complex practical imaging scenario that generates test LR images, the simple manual imaging degradation that generates the training LR images) is not considered in these algorithms. In this paper, we propose an image homogenization strategy via re-expression to solve this problem. In contrast to existing methods, we propose a homogenization projection in LR space and HR space as compensation for the classical LR/HR projection to formulate the FSR in a multi-stage framework. We then develop a re-expression process to bridge the gap between the complex degradation and the simple degradation, which can remove the heterogeneous factors such as serious noise and blur. To further improve the accuracy of the homogenization, we extract the image patch set that is invariant to degradation changes as Robust Neighbor Resources (RNR), with which these two homogenization projections re-express the input LR images and the initial inferred HR images successively. Both quantitative and qualitative results on the public datasets demonstrate the effectiveness of the proposed algorithm against the state-of-the-art methods. [ABSTRACT FROM AUTHOR]

In recent years, unmanned aerial vehicles (UAVs) have unlocked numerous sensing applications, which are expected to add billions of dollars to the world economy in the next decade. To further improve the Quality-of-Service in these applications, the 3rd Generation Partnership Project has considered the use of terrestrial cellular networks to support UAV sensing services, also known as the cellular Internet of UAVs. In this paper, we consider a cellular Internet of UAVs, where the sensory data can be transmitted either to the base station via cellular links, or to the mobile devices by underlay UAV-to-Device (U2D) communications. To evaluate the freshness of the sensory data, the concept of age of information (AoI) is adopted, in which a lower AoI implies fresher data. Since UAVs’ AoIs are determined by their trajectories during sensing and transmission, we investigate the AoI minimization problem for UAVs by designing their trajectories. This problem is a Markov decision problem with an infinite state-action space, and thus we utilize multi-agent deep reinforcement learning to approximate the state-action space. Then, we propose a multi-UAV trajectory design algorithm to solve this problem. Simulation results show that our proposed algorithm can achieve a lower AoI than a greedy algorithm, policy gradient algorithm, and overlay U2D scheme. [ABSTRACT FROM AUTHOR]

Cache optimization, i.e., determining the optimal content placement and routing paths, is essential for obtaining high performance of cache-enabled networks. This paper studies the problem of optimizing system throughput and content delivery cost over cache networks with lossy links (i.e., ICN-based wireless IoT systems), where content is divided into packet-level chunks, and packets may be lost in transmission. We first propose a new performance metric – the expected overall content routing cost for satisfied requests (RCS), for better characterizing content delivery cost under packet losses. RCS at the same time possesses the attractive mathematical property of super-modularity. We then formulate an optimization problem for the task through jointly optimizing content caching and request routing, and analyze it under fixed-routing scenario. The formulated problem is NP-hard and we prove it is reducible to the one of minimizing content routing cost without packet losses. We establish rules for the reduction, and leverage existing efficient algorithm to solve the problem. We also propose a potential-based online algorithm that is simple and adaptive to traffic changes and packet losses. The effectiveness of our mechanism is validated through extensive simulations over a wide array of network topologies. [ABSTRACT FROM AUTHOR]

We consider a generalization of both the classic Steiner tree problem and the terminal Steiner tree problem. Given a complete graph G = (V,E) with a metric cost function c:E \rightarrow \BBQ_ \geq and two proper subsets R \subset V and R^\prime \subseteq R, a partial-terminal Steiner tree is a Steiner tree which contains all vertices in \it R such that all vertices in R^\prime must be leaves. The partial-terminal Steiner tree problem is to find a partial-terminal Steiner tree of the minimum cost in G. The previously best-known approximation ratio of the problem is 2\rho, where \bf \rho is the approximation ratio of the Steiner tree problem. In this paper, we improve the ratio from 2\rho to 2\rho - \rho \over 3\rho - 2 - f, where f is a non-negative function whose value is between 0 and \rho - \rho \over 3\rho - 2. [ABSTRACT FROM AUTHOR]

It is of central interest in information theory to determine whether a given vector in the entropy space is an almost entropic vector. This problem can be answered if all the information inequalities are known, but this is an extremely challenging problem. On the other hand, we can establish that a given vector is an entropy vector if we can show the existence of distribution such that the corresponding entropy vector is the same as the given vector. However, there is no known algorithm to solve this problem. Only for the simplest case of binary entropy vectors, an algorithm is known to solve this problem. In this paper, we present a recursive algorithm to determine whether a given vector is a quasi-uniform entropy vector and, if it is, to return a consistent quasi-uniform distribution. We also present two applications of the recursive procedure: (i) to generate all quasi-uniform distributions motivated by the problem of finding the smallest quasi-uniform distribution such that its entropy vector violates the well known Ingleton inequality and (ii) to obtain an entropy vector (not necessarily quasi-uniform) near to a target vector in the entropy space for random variables with given alphabet size. [ABSTRACT FROM AUTHOR]

In this paper, we aim to design an adaptive power allocation scheme to minimize the average transmit power of a hybrid automatic repeat request with chase combining (HARQ-CC) enabled non-orthogonal multiple access (NOMA) system under strict outage constraints of users. Specifically, we assume that the base station only knows the statistical channel state information of the users. To achieve power efficient design and cope with the reliable transmissions of users, a partial HARQ-CC scheme is proposed. We first focus on the two-user case. To evaluate the performance of the two-user partial HARQ-CC enabled NOMA system, we first analyze the outage probability of each user. Then, an average power minimization problem is formulated. However, the attained expressions of the outage probabilities are nonconvex, and thus make the problem challenging to solve. Hence, we propose to use a successive convex approximation (SCA) based algorithm to solve the problem iteratively. Meanwhile, we prove that the proposed algorithm can converge to a Karush–Kuhn–Tucker point of the original problem. For more practical applications, we also investigate the partial HARQ-CC enabled transmissions in the multi-user scenario. The user pairing and power allocation problem is considered. With the aid of matching theory, a low complexity algorithm is presented to first handle the user pairing problem. Then the power allocation problem for each user pair is solved by the proposed SCA-based algorithm. Simulation results show the efficiency of the proposed transmission strategy and the near-optimality of the proposed algorithms. [ABSTRACT FROM AUTHOR]

Power loss and voltage regulation are two fundamental and challenging issues in DC distributed generation system. In this paper, a multi-objective optimization problem is established to achieve trade-offs between reducing power loss and decreasing voltage deterioration by adjusting the weighting coefficients. This problem is proven to be a convex optimization under constant impedance load and constant current load. A distributed algorithm based on random coordinate descent method is developed to solve this problem without acquiring the information of line impedance. Thus, the optimal operating point of the system can be found automatically in real-time, and the deviation of optimal solution caused by the fluctuation of network parameters is avoided. In addition, the complexity of this algorithm is low and its computational requirement is reduced in practice. Finally, case studies are implemented to verify the effectiveness of the proposed algorithm under the scenarios of line parameter fluctuation, load variation, communication line failure, and plug-play capabilities. [ABSTRACT FROM AUTHOR]

Breakthroughs in unsupervised domain adaptation (uDA) can help in adapting models from a label-rich source domain to unlabeled target domains. Despite these advancements, there is a lack of research on how uDA algorithms, particularly those based on adversarial learning, can work in distributed settings. In real-world applications, target domains are often distributed across thousands of devices, and existing adversarial uDA algorithms – which are centralized in nature – cannot be applied in these settings. To solve this important problem, we introduce FRuDA: an end-to-end framework for distributed adversarial uDA. Through a careful analysis of the uDA literature, we identify the design goals for a distributed uDA system and propose two novel algorithms to increase adaptation accuracy and training efficiency of adversarial uDA in distributed settings. Our evaluation of FRuDA with five image and speech datasets show that it can boost target domain accuracy by up to 50% and improve the training efficiency of adversarial uDA by at least $11\times$ 11 × . [ABSTRACT FROM AUTHOR]

In this paper we study the problem of characterizing and exploiting the complete flexibility of a special logic architecture, called P-circuits, which realize a Boolean function by projecting it onto overlapping subsets given by a generalized Shannon decomposition. P-circuits are used to restructure logic by pushing some signals towards the outputs. The algorithms proposed so far for exploiting the structural flexibility of P-circuits do not guarantee to find the best implementation, because they cast the problem as the minimization of an incompletely specified function. Instead, here we show that to explore all solutions we must set up the problem as the minimization of a Boolean relation, because there are don’t care conditions that cannot be expressed by single cubes. Finally we report the results obtained using a minimizer of Boolean relations, which improve in a major way with respect to the previous literature. [ABSTRACT FROM PUBLISHER]

The ever-growing cellular traffic demand has laid a heavy burden on cellular networks. The recent rapid development in vehicle-to-vehicle communication techniques makes vehicular delay-tolerant network (VDTN) an attractive candidate for traffic offloading from cellular networks. In this paper, we study a bulk traffic offloading problem with the goal of minimizing the cellular communication cost under the constraint that all the subscribers receive their desired whole content before it expires. It needs to determine the initial offloading points and the dissemination scheme for offloaded traffic in a VDTN. By novelly describing the content delivery process via a contact-based flow model, we formulate the problem in a linear programming (LP) form, based on which an online offloading scheme is proposed to deal with the network dynamics (e.g., vehicle arrival/departure). Furthermore, an offline LP-based analysis is derived to obtain the optimal solution. The high efficiency of our online algorithm is extensively validated by simulation results. [ABSTRACT FROM PUBLISHER]

The problem of random number generation dates back to Von Neumann’s work in 1951. Since then, many algorithms have been developed for generating unbiased bits from complex correlated sources as well as for generating arbitrary distributions from unbiased bits. An equally interesting, but less studied aspect is the structural component of random number generation. That is, given a set of primitive sources of randomness, and given composition rules induced by a device or nature, how can we build networks that generate arbitrary probability distributions? In this paper, we study the generation of arbitrary probability distributions in multivalued relay circuits, a generalization in which relays can take on any of $N$ states and the logical ‘and’ and ‘or’ are replaced with ‘min’ and ‘max’ respectively. These circuits can be thought of as modeling the timing of events which depend on other event occurences. We describe a duality property and give algorithms that synthesize arbitrary rational probability distributions. We prove that these networks are robust to errors and design a universal probability generator which takes input bits and outputs any desired binary probability distribution. [ABSTRACT FROM PUBLISHER]

In pulsed Doppler radars, subsampling causes incorrect estimates of the radial velocity of the detected targets whenever its related Doppler frequency is greater than the pulse repetition frequency of the radar. The classic Chinese remainder theorem is a well-known method to overcome this problem. On the other hand, the robust Chinese remainder theorem is a search-based algorithm that, under some conditions, can guarantee the correct estimation of the Doppler frequency. In this paper, we have derived the exact probability of detection for both methods applied in a pulsed Doppler radar. Simulations have been compared to the analytical results and have shown an excellent agreement. [ABSTRACT FROM AUTHOR]

Both cost-sensitive classification and online learning have been extensively studied in data mining and machine learning communities, respectively. However, very limited study addresses an important intersecting problem, that is, “Cost-Sensitive Online Classification”. In this paper, we formally study this problem, and propose a new framework for Cost-Sensitive Online Classification by directly optimizing cost-sensitive measures using online gradient descent techniques. Specifically, we propose two novel cost-sensitive online classification algorithms, which are designed to directly optimize two well-known cost-sensitive measures: (i) maximization of weighted sum of sensitivity and specificity, and (ii) minimization of weighted misclassification cost. We analyze the theoretical bounds of the cost-sensitive measures made by the proposed algorithms, and extensively examine their empirical performance on a variety of cost-sensitive online classification tasks. Finally, we demonstrate the application of the proposed technique for solving several online anomaly detection tasks, showing that the proposed technique could be a highly efficient and effective tool to tackle cost-sensitive online classification tasks in various application domains. [ABSTRACT FROM AUTHOR]

The \(k\) -core decomposition in a graph is a fundamental problem for social network analysis. The problem of \(k\) -core decomposition is to calculate the core number for every node in a graph. Previous studies mainly focus on \(k\) -core decomposition in a static graph. There exists a linear time algorithm for \(k\) -core decomposition in a static graph. However, in many real-world applications such as online social networks and the Internet, the graph typically evolves over time. In such applications, a key issue is to maintain the core numbers of nodes when the graph changes over time. A simple implementation is to perform the linear time algorithm to recompute the core number for every node after the graph is updated. Such simple implementation is expensive when the graph is very large. In this paper, we propose a new efficient algorithm to maintain the core number for every node in a dynamic graph. Our main result is that only certain nodes need to update their core numbers when the graph is changed by inserting/deleting an edge. We devise an efficient algorithm to identify and recompute the core numbers of such nodes. The complexity of our algorithm is independent of the graph size. In addition, to further accelerate the algorithm, we develop two pruning strategies by exploiting the lower and upper bounds of the core number. Finally, we conduct extensive experiments over both real-world and synthetic datasets, and the results demonstrate the efficiency of the proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper focuses on the multiobjective solutions of the flow shop scheduling problem with and without sequence dependent setup times. In our case, the two objectives are the minimization of makespan and total flowtime. These problems are solved with a novel multiobjective local search framework-based decomposition, called multiobjective local search based decomposition (MOLSD), which decomposes a multiobjective problem into a number of single objective optimization subproblems using aggregation method and optimizes them simultaneously. First, a problem-specific Nawaz–Enscore–Hoam heuristic is used to initialize the population to enhance the quality of the initial solution. Second, a Pareto local search embedded with a heavy perturbation operator is applied to search the promising neighbors of each nondominated solution found so far. Then, when solving each subproblem, a single insert-based local search, a multiple local search strategy, and a doubling perturbation mechanism are designed to exploit the new individual. Finally, a restarted method is used to avoid the algorithm trapping into the local optima, which has a significant effect on the performance of the MOLSD. Comprehensive experiments have been conducted by two standard multiobjective metrics: 1) hyper-volume indicator; and 2) set coverage. The experimental results show that the proposed MOLSD provides better solutions that several state of the art algorithms. [ABSTRACT FROM PUBLISHER]

Clustering categorical sequences is an important and difficult data mining task. Despite recent efforts, the challenge remains, due to the lack of an inherently meaningful measure of pairwise similarity. In this paper, we propose a novel variable-order Markov framework, named weighted conditional probability distribution (WCPD), to model clusters of categorical sequences. We propose an efficient and effective approach to solve the challenging problem of model initialization. To initialize the WCPD model, we propose to use a first-order Markov model built on a weighted fuzzy indicator vector representation of categorical sequences, which we call the WFI Markov model. Based on a cascade optimization framework that combines the WCPD and WFI models, we design a new divisive hierarchical clustering algorithm for clustering categorical sequences. Experimental results on data sets from three different domains demonstrate the promising performance of our models and clustering algorithm. [ABSTRACT FROM AUTHOR]

Influence maximization is a fundamental research problem in social networks. Viral marketing, one of its applications, is to get a small number of users to adopt a product, which subsequently triggers a large cascade of further adoptions by utilizing “Word-of-Mouth” effect in social networks. Time plays an important role in the influence spread from one user to another and the time needed for a user to influence another varies. In this paper, we propose the time constrained influence maximization problem. We show that the problem is NP-hard, and prove the monotonicity and submodularity of the time constrained influence spread function. Based on this, we develop a greedy algorithm. To improve the algorithm scalability, we propose the concept of Influence Spreading Path in social networks and develop a set of new algorithms for the time constrained influence maximization problem. We further parallelize the algorithms for achieving more time savings. Additionally, we generalize the proposed algorithms for the conventional influence maximization problem without time constraints. All of the algorithms are evaluated over four public available datasets. The experimental results demonstrate the efficiency and effectiveness of the algorithms for both conventional influence maximization problem and its time constrained version. [ABSTRACT FROM PUBLISHER]

This paper examines the mapping of algorithms encountered when solving dense linear systems and linear least-squares problems to a custom Linear Algebra Processor. Specifically, the focus is on Cholesky, LU (with partial pivoting), and QR factorizations and their blocked algorithms. As part of the study, we expose the benefits of redesigning floating point units and their surrounding data-paths to support these complicated operations. We show how adding moderate complexity to the architecture greatly alleviates complexities in the algorithm. We study design tradeoffs and the effectiveness of architectural modifications to demonstrate that we can improve power and performance efficiency to a level that can otherwise only be expected of full-custom ASIC designs. A feasibility study of inner kernels is extended to blocked level and shows that, at block level, the Linear Algebra Core (LAC) can achieve high efficiencies with up to 45 GFLOPS/W for both Cholesky and LU factorization, and over 35 GFLOPS/W for QR factorization. While maintaining such efficiencies, our extensions to the MAC units can achieve up to 10, 12, and 20 percent speedup for the blocked algorithms of Cholesky, LU, and QR factorization, respectively. [ABSTRACT FROM AUTHOR]

In this article, we consider a class of decentralized resource allocation problems over directed networks, where each node only communicates with its in-neighbors and attempts to minimize its own cost when network-wide resource constraints as well as local capacity limits are satisfied. Decentralized optimization to solve this problem has been a significant focus within engineering research due to its advantages in scalability, robustness, and flexibility. Most existing methods are synchronous while few works are devoted to asynchronously solving the problem. The problem becomes even more challenging when the networks are directed. To address the resource allocation problem when the above issues are considered, we propose a novel decentralized asynchronous algorithm based on the gossip-based communication protocol and epigraph strategy. An important feature of the algorithm is that it is implemented in a completely decentralized manner in the case of asynchronous communication and directed networks. We provide theoretical proof to guarantee the convergence of the proposed algorithm, which indicates that it can successfully allocate the optimal resource. When solving the resource allocation problem over time-varying directed networks, we further discuss a related decentralized asynchronous algorithm according to the random sleep protocol. Numerical examples are given to demonstrate the viability and performance of the algorithms. [ABSTRACT FROM AUTHOR]

Despite the success of stochastic variance-reduced gradient (SVRG) algorithms in solving large-scale problems, their stochastic gradient complexity often scales linearly with data size and is expensive for huge data. Accordingly, we propose a hybrid stochastic-deterministic minibatch proximal gradient (HSDMPG) algorithm for strongly convex problems with linear prediction structure, e.g., least squares and logistic/softmax regression. HSDMPG enjoys improved computational complexity that is data-size-independent for large-scale problems. It iteratively samples an evolving minibatch of individual losses to estimate the original problem, and can efficiently minimize the sampled subproblems. For strongly convex loss of $n$ n components, HSDMPG attains an $\epsilon$ ε -optimization-error within $\mathcal {O} \left(\kappa \log ^{\zeta +1}\left(\frac{1}{\epsilon }\right)\frac{1}{\epsilon }\bigwedge n\log ^{\zeta }\left(\frac{1}{\epsilon }\right)\right)$ O κ log ζ + 1 1 ε 1 ε ⋀ n log ζ 1 ε stochastic gradient evaluations, where $\kappa$ κ is condition number, $\zeta =1$ ζ = 1 for quadratic loss and $\zeta =2$ ζ = 2 for generic loss. For large-scale problems, our complexity outperforms those of SVRG-type algorithms with/without dependence on data size. Particularly, when $\epsilon =\mathcal {O}(1/\sqrt{n})$ ε = O (1 / n) which matches the intrinsic excess error of a learning model and is sufficient for generalization, our complexity for quadratic and generic losses is respectively $\mathcal {O} (n^{0.5}\log ^{2}(n))$ O (n 0. 5 log 2 (n)) and $\mathcal {O} (n^{0.5}\log ^{3}(n))$ O (n 0. 5 log 3 (n)) , which for the first time achieves optimal generalization in less than a single pass over data. Besides, we extend HSDMPG to online strongly convex problems and prove its higher efficiency over the prior algorithms. Numerical results demonstrate the computational advantages of HSDMPG. [ABSTRACT FROM AUTHOR]

In recent years, NAND flash memory has been widely used in mobile devices, laptops, desktops, and data center storage systems due to its low-power consumption, high performance, high density, lightweight, shock resistance, and high-reliability natures. However, as the stacked layers and the storage density increase, flash memory also suffers from a higher raw bit error rate (RBER) and shorter lifetime. Observing that reliable cell states suffer from less data retention errors and program disturbance, we propose a differential evolution coding scheme to increase the probability of storing data in more reliable cell states, thereby reducing the RBER. We conducted the experiments over a development platform of SSD storage device with 3D-TLC charge trap (CT) NAND flash memory. The experimental results showed that the proposed differential evolution algorithm with asymmetric coding scheme could averagely reduce RBER by 48.88%, 65.45%, 52.61%, 61.99%, 80.19%, and 33.18% compared with baseline, asymmetric coding algorithm, asymmetric coding scheme with stripe-pattern elimination algorithm, UAC- $n$ LC, word-line batch score modulation programming, and SCB schemes. [ABSTRACT FROM AUTHOR]

This article investigates the multitarget tracking problem for multiple Lagrangian plants (MLPs) in the presence of sampled-data interactions, uncertain dynamic terms, and input-to-output redundancy. Two classes of impulsive estimator-based control (IEC) algorithms, including the first- and higher-order IEC algorithms, are newly designed to observe the dynamic uncertain terms, estimate the states of the multiple targets, and finally solve the above-mentioned problem. Based on the properties of the small-value norms, Lyapunov stability theory, Schur stability theory, and Hurwitz criterion, some sufficient conditions and the convergence radius are derived for guaranteeing the convergence of these IEC algorithms. Finally, numerical simulations are performed on networked heterogeneous manipulators to verify the effectiveness of the proposed algorithms. [ABSTRACT FROM AUTHOR]

The continuous flock-of-starlings optimization (CFSO) is applied to the optimization of the array coils usually used for transcranial magnetic stimulation. The CFSO is the continuous equivalent model of the flock-of-starlings optimization (FSO) algorithm, and it is expressed in terms of a state-space representation. The trajectories of the CFSO particles that explore the space solutions of the optimization problem, are obtained by a direct application of closed forms with suitable time windows (TWs). Thanks to the representation in terms of state equations, it is possible to drive the trajectories by passing from convergence to divergence or vice versa, i.e., from exploration to exploitation. Moreover, it is possible to refine the solution by reducing the amplitude of the TWs, during the optimization procedure, enhancing the performance of numerical FSO algorithm. The use of closed forms makes the CFSO easy to be implemented and accurate in quality of solution. Validation results are presented and the performances of different optimal array coils configurations have been compared. [ABSTRACT FROM PUBLISHER]

This article is dedicated to solving the coordination problem using a reset algorithm that consists of linear impulsive dynamics, over which antagonistic reciprocity among interacting individuals is inevitable. It shows that reciprocal agents are convergent (including consensus and clusters) whenever the scaling parameters of an agent, corresponded to continuous/discrete dynamics, enjoy the same proportion value that matches to all agents. Otherwise, all participating agents share nothing eventually, that is, they achieve stability. This immediately gives rise to that the final aggregated values of agents are entirely determined by the underlying parameters, on condition that the connection property of communication topologies is preserved. Therefore, the proposed setup features a unified perspective on consensus, clusters (including bipartite consensus), and stability that are separately studied in most of the existing literature. The developed method is well supported via numerical examples. [ABSTRACT FROM AUTHOR]

X-ray-induced acoustic computed tomography (XACT) provides X-ray absorption-based contrast with acoustic detection. For its clinical translation, XACT imaging often has a limited field of view. This can result in image artifacts and overall loss of quantification accuracy. In this article, we aim to demonstrate model-based XACT image reconstruction to address these problems. An efficient matrix-free implementation of the regularized LSQR (MF-LSQR)-based minimization scheme and a noniterative model back-projection (MBP) scheme for computing XACT reconstructions have been demonstrated in this article. The proposed algorithms have been numerically validated and then used to perform reconstructions from experimental measurements obtained from an XACT setup. While the commonly used back-projection (BP) algorithm produces limited-view and noisy artifacts in the region of interest (ROI), model-based LSQR minimization overcomes these issues. The model-based algorithms also reduce the ring artifacts caused due to the nonuniformity response of the multichannel data acquisition. Using the model-based reconstruction algorithms, we are able to obtain reasonable XACT reconstructions for acoustic measurements of up to 120° view. Although the MBP is more efficient than the model-based LSQR algorithm, it provides only the structural information of the ROI. Overall, it has been demonstrated that the model-based image reconstruction yields better image quality for XACT than the standard BP. Moreover, the combination of model-based image reconstruction with different regularization methods can solve the limited-view problem for XACT imaging (in many realistic cases where the full-view dataset is unavailable), and hence pave the way for future clinical translation. [ABSTRACT FROM AUTHOR]

The square-wave voltage signal injection method with the proportional-integral (PI) observer is commonly adopted to estimate the rotor position of interior permanent magnet synchronous motor (IPMSM). However, the saliency estimation method with PI observer is a continuous injection method and the polarity identification method is a discrete one, which causes extra transition time and complexity. To solve this problem, a fast unipolar sequence-pulse injection method is proposed to unify the process of saliency and polarity identification and the complexity of the algorithm as well as the identification time are reduced. At the same time, a four-stage search algorithm is proposed to ensure the fast convergence and improve the accuracy by reducing the number of the pulse voltage signals. The experiment on motor drive platform verifies the effectiveness of the proposed method to IPMSMs with different saliency ratios. [ABSTRACT FROM AUTHOR]

The minimum dominating set (MDS) of the network is a node subset of smallest size that every node in the network is either in this subset or is adjacent to one or more nodes of this subset. MDS has found wide applications, ranging from network monitoring, routing, to epidemic control, and text processing. However, the majority of existing studies on MDS problem are confined to single networks. In real world, more and more complex systems consist of a set of elements linked up by different types of connections, which are best modeled as multiplex networks with interacting network layers. Though vastly important, the MDS of the multiplex networks has not yet been formally defined and its application and identification remain open issues. In this article, we present the definition of the MDS of the multiplex network and show some of its possible applications. For solving the MDS problem of the multiplex network, we built a spin-glass model and solve it through the belief-propagation (BP) equations under the replica symmetry mean-field theory. As a consequence, we can predict the relative size of the MDS of the multiplex network theoretically and we can propose a BP-guided decimation algorithm to construct an approximate optimal dominating set in practice. Then the algorithm is improved in both accuracy and efficiency by embedding a novel multiplex network-oriented leaf-removal strategy. The effectiveness of the proposed algorithms is finally verified by comparing with other methods on a number of the multiplex network examples. [ABSTRACT FROM AUTHOR]