Search

In order to meet the heating requirement of EAST tokamak, ion cyclotron range of frequency (ICRF) heating is utilized as one of the main auxiliary heating methods, which plays an important role in coupling radio frequency (RF) power into the plasma. As a member of plasma facing components, ICRF antenna suffers the plasma radiation as well which is one of the causes of the thermal load on the antenna. Plasma radiation and RF thermal load during the operation of ICRF and thermal load caused by HALO current during vertical displacement event will contribute together to a huge thermal load on the surface of the antenna and consequently the structural stability and reliability of ICRF antenna will be affected. Therefore, cooling channels is needed to remove heat on the ICRF antenna. In this paper, cooling channels for straps of ICRF antenna are designed based on the thermal load on the antenna, and thermal-structural analysis of straps with cooling channels is also carried out by the finite-element method. [ABSTRACT FROM AUTHOR]

Power supplies have played crucial role to improve and extend plasma applications. Several dc, pulsed, and radio frequency (RF) stabilized power supplies have been developed over a wide range of frequencies and voltage waveforms. However, the influence of voltage waveform on the plasma densification, mainly due to the secondary electrons emission from the electrodes, has not been quite explored. This paper proposes an asymmetric pulsed bipolar power supply, adjustable in frequency, amplitude, pulsewidth, and number of pulses for generation of cold plasmas. Short period positive pulses, between longer negative pulses, increase greatly the secondary electron emission from the electrodes and, consequently, the plasma ionization rate. Short pulses (ns) are obtained by the phase shift between each carrier, and the high-intensity pulses are obtained by cascading the cell submodules in a half-bridge cascade topology, using a modular half-bridge converter configuration. The intensity of the positive and negative pulses can be varied independently. There is no unintended dc voltage level between the electrodes, which appear in RF plasmas. The plasma generated in this way is free of electric arc and can be kept stable within a broader range of operating parameters, mainly the voltage and the working gas pressure. [ABSTRACT FROM AUTHOR]

This paper reports the levitation of micro-organisms in the sheath of radio-frequency (RF) plasma. Based on simple force-balance calculations, the required electric field for the levitation of micro-organisms has been estimated. It is predicted that micro-organisms could levitate at the periphery of the sheath. Experimental results demonstrate the levitation of two species of bacillus micro-organisms Escherichia coli (E. coli) and Klebsiella pneumoniae in an RF plasma. The almost monodiverse Klebsiella pneumoniae levitating in the RF plasma formed an ordered state similar to a 2-D Coulomb crystal. Diverse E. coli particles demonstrate the tendency that the levitating height of micro-organisms decreases as the radius of particles increases. Levitating micro-organisms in plasmas can be referred as dusty plasmas. [ABSTRACT FROM AUTHOR]

A new method of measuring the charge of a single dust particle, which is used in a stratified glow discharge of small currents and pressures, is proposed. In this method, the vibrational characteristics of the dust particle trapped in a standing striation arising under the modulation of the discharge current are used for dust particle charge determination. The measured value of the charge is compared with theoretical estimates and literature data for glow discharge conditions. [ABSTRACT FROM AUTHOR]

In the present RF-driven plasma with a lot of high-energy electrons, there may be anisotropic plasma pressure, which makes the usual equilibrium analysis difficult, but the Cauchy condition surface method can reconstruct the plasma shape precisely regardless of the anisotropy. In addition, the plasma current effect in the open magnetic surfaces outside of the closed magnetic surfaces is considered in the RF-driven divertor plasma. In the reconstruction process, singular value (SV) decomposition is used and optimal criterion function for generalized cross validation is estimated concerning truncation or reduction of the small-SV components. [ABSTRACT FROM PUBLISHER]