Search

Based on the emission factor method and LMDI-LEAP model, this paper systematically studies the current situation, influencing factors and changing trend of carbon emissions from rural buildings in a typical village located in southern China. The results showed that (1) the per capita carbon emissions generated by the energy consumption of rural buildings is 2.58 tCO2/a. Carbon emissions from electricity consumption in buildings account for about 96.07%; (2) the per capita building area, building area energy intensity, population size, population structure and carbon emission coefficient affect rural building carbon emissions, with contribution rates of 70.13%, 31.27%, 0.61%, −1.21% and −0.80%, respectively; (3) from 2021 to 2060, the carbon emissions of rural buildings are expected to increase first and then decrease. In 2021, the base year, carbon emissions from buildings were 2755.49 tCO2. The carbon emissions will peak at 5275.5 tCO2. Measures such as controlling the scale of buildings and improving the utilization rate of clean energy can effectively reduce carbon emissions, in which case the peak can be reduced to 4830.06 tCO2. Finally, the countermeasures and suggestions about rural building energy saving and emission reduction are proposed, including improving the construction management, raising energy efficiency standards in buildings, increasing the proportion of clean energy and raising residents' awareness of energy conservation. [ABSTRACT FROM AUTHOR]

In this work, a novel solid rotor induction motor with toroidal winding (N-TWSRIM) is proposed and its structure and main structural parameters are given. The operating principle is analyzed in accordance with the movement of the armature magnetic field at different times. An equivalent circuit model (ECM) of the N-TWSRIM is established based on composite multilayer theory to analyze and calculate motor performance quickly and accurately. Electromagnetic performance, which includes output torque, stator current, and power factor under different slip, is calculated with ECM, and its results are compared with those of the finite element method. A prototype of the N-TWSRIM is built and experimented on to validate the correctness of the operating principle and ECM. Experimental results on stator current and torque are consistent with the finite element and analytical results. [ABSTRACT FROM AUTHOR]

In this paper, a modified equivalent circuit model (ECM), which considers the effects of an arc-shaped stator structure and saturation, is presented to calculate the characteristics of a two-degree-of-freedom direct drive induction motor (2DoFDDIM). The motor has a novel slotted solid rotor (SSR), which is slotted along the axial and circumferential directions, and copper is cast in the slots. The SSR is equivalent to a cage rotor by analyzing the current distribution using the circuit diagram. The corrected ECM parameter expressions of a cage rotor are proposed to calculate the SSR parameters. The characteristics obtained by ECM and finite element method are compared to verify the accuracy of the modified ECM. This paper provides reference for calculating the parameters of the induction motor with SSR. [ABSTRACT FROM AUTHOR]

Chemotaxis, the ability of motile bacteria to direct their movement in gradients of attractants and repellents, plays an important role during the rhizosphere colonization by rhizobacteria. The rhizosphere is a unique niche for plant–microbe interactions. Root exudates are highly complex mixtures of chemoeffectors composed of hundreds of different compounds. Chemotaxis towards root exudates initiates rhizobacteria recruitment and the establishment of bacteria–root interactions. Over the last years, important progress has been made in the identification of root exudate components that play key roles in the colonization process, as well as in the identification of the cognate chemoreceptors. In the first part of this review, we summarized the roles of representative chemoeffectors that induce chemotaxis in typical rhizobacteria and discussed the structure and function of rhizobacterial chemoreceptors. In the second part we reviewed findings on how rhizobacterial chemotaxis and other root–microbe interactions promote the establishment of beneficial rhizobacteria-plant interactions leading to plant growth promotion and protection of plant health. In the last part we identified the existing gaps in the knowledge and discussed future research efforts that are necessary to close them. [ABSTRACT FROM AUTHOR]

A tubular permanent-magnet linear generator is suitable for direct drive wave energy conversion owing to its simple structure, easy maintenance and high efficiency. In this study, a novel Gramme winding tubular permanent-magnet linear generator (GW) is designed to increase power density. First, the structure of the Gramme winding and concentrated winding tubular permanent-magnet linear generator is introduced and the operation principle of the generator is analysed. Second, the initial parameters of GW are determined based on the similar overall dimensions to those of the concentrated winding tubular permanent-magnet linear generator. Third, the air gap flux density, external characteristics, voltage regulation, output power, and loss of the two generators are compared. Finally, the DC load capacities of the two generators are compared based on a three-phase full-control bridge rectifying circuit. The results show that the GW has a higher power density than the latter. [ABSTRACT FROM AUTHOR]

This paper proposes a demagnetization fault detection, mode recognition, magnetic pole positioning, and degree evaluation method for permanent magnet synchronous motors. First, the analytical model of the single-coil no-load back electromotive force (EMF) of demagnetization fault for Permanent magnet synchronous motor (PMSM) arbitrary magnetic poles is established. In the analytical model, the single-coil no-load back EMF residual of the health state and the single magnetic pole sequential demagnetization fault are calculated and normalized. Model results are used as the fault sample database. Second, the energy interval database of the single-coil no-load back EMF residual with different numbers of magnetic pole demagnetization is established. Demagnetization fault detection and degree evaluation are performed by the real-time acquired amplitudes of the single-coil no-load back EMF residual. The number of demagnetization poles is determined by comparing the energy of the single-coil no-load back EMF residual with the energy interval database. Demagnetization mode recognition and magnetic pole positioning are realized by analyzing the correlation coefficients between normalized the single-coil no-load back EMF residual and the fault sample database. Finally, results of analysis of the finite element simulation validate the feasibility and effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

A two-degree-of-freedom direct-drive induction motor (2DoFDDIM), whose solid rotor is coated with a copper layer, is capable of linear, rotary, and helical motions and has widespread applications. For solid-rotor motors, the calculation and analysis of rotor total eddy current loss (TECL) are crucial in studying the factors causing such a loss and possible loss reduction methods. In this study, a new nonlinear analytical method considering the saturation of the rotor core is proposed to solve the fundamental magnetic field. The new method divides the time period into segments. The magnetic field distribution at any time is obtained using Maxwell equations. The eddy current losses in the copper layer and rotor core caused by the fundamental magnetic field are calculated. The surface eddy current losses in the copper layer and rotor core caused by harmonics are calculated using a 2D analytical method. TECL is determined by the sum of eddy current and surface eddy current losses. Coefficients are utilized to consider eddy, saturation, and end-region effects when calculating the rotor core TECL. The new method is verified using 3D FEM, and the results show the proposed method has higher accuracy than the original method. The errors of the rotor core and copper layer TECLs are less than 6 % and 7.3 % , respectively. [ABSTRACT FROM AUTHOR]