Search

The existence of parallel joints has an impact on the size effect of the uniaxial compressive strength of rock, but the relationship is yet to be obtained. In this paper, the influence of parallel-joint spacing on the size effect and characteristic size of rock uniaxial compressive strength is studied by establishing five types of parallel-joint-spacing simulation schemes. The influence of parallel-joint spacing on the size effect of rock uniaxial compressive strength is explored by analyzing the stress–strain curves of rocks with different parallel-joint spacings and rock sizes. The relationship between the uniaxial compressive strength and the size of the rock with parallel joints and its special mathematical model are obtained, and the particular form of the compressive-strength characteristic size and parallel-joint spacing is obtained.

Based on the type-II fuzzy logic, this paper proposes a robust adaptive fault diagnosis and fault-tolerant control (FTC) scheme for multisensor faults in the variable structure hypersonic vehicles with parameter uncertainties. Type-II fuzzy method approximates the original models while eliminating the parameter uncertainties. Hence the sensor faults are detected and isolated by the multiple output residuals and thresholds considering nonlinear approximation errors and disturbance. Based on the fuzzy adaptive augmented observer, the faults and disturbance are all estimated accurately by an improved proportional-differential part. Then a variable structure FTC scheme repairs the faults by the estimation, the fast-varying disturbance is considered in FTC scheme and is compensated by the control parameters designed based on its derivative function, thereby enhancing the output robust tracking accuracy of the variable structure hypersonic vehicles. The Lyapunov theory proves the system robust stability, semi-physical simulation verifies the validity of the proposed method and the superiority compared with the traditional method.

High-temperature thermal contact resistance (TCR) plays an important role in heat-pipe-cooled thermal protection structures due to the existence of contact interface between the embedded heat pipe and the heat resistive structure, and the reduction mechanism of thermal contact resistance is of special interests in the design of such structures. The present paper proposed a finite element model of the high-temperature thermal contact resistance based on the multi-point contact model with the consideration of temperature-dependent material properties, heat radiation through the cavities at the interface and the effect of thermal interface material (TIM), and the geometry parameters of the finite element model are determined by simple surface roughness test and experimental data fitting. The experimental results of high-temperature thermal contact resistance between superalloy GH600 and C/C composite material are employed to validate the present finite element model. The effect of the crucial parameters on the thermal contact resistance with and without TIM are also investigated with the proposed finite element model.

This paper proposes the correction of faulty sensors using a synthesis of the greedy sparse constrained optimization GSCO) technique. The failure of sensors can damage the radiation power pattern in terms of sidelobes and nulls. The synthesis problem can recover the wanted power pattern with reduced number of sensors into the background of greedy algorithm and solved with orthogonal matching pursuit (OMP) technique. Numerical simulation examples of linear arrays are offered to demonstrate the effectiveness of getting the wanted power pattern with a reduced number of antenna sensors which is compared with the available techniques in terms of sidelobes level and number of nulls.

Parkinson's disease (PD) is a common and debilitating neurodegenerative disorder that affects patients in all countries and of all nationalities. Magnetic resonance imaging (MRI) is currently one of the most widely used diagnostic imaging techniques utilized for detection of neurologic diseases. Changes in structural biomarkers will likely play an important future role in assessing progression of many neurological diseases inclusive of PD. In this paper, we derived structural biomarkers from diffusion MRI (dMRI), a structural modality that allows for non-invasive inference of neuronal fiber connectivity patterns. The structural biomarker we use is the ensemble average propagator (EAP), a probability density function fully characterizing the diffusion locally at a voxel level. To assess changes with respect to a normal anatomy, we construct an unbiased template brain map from the EAP fields of a control population. Use of an EAP captures both orientation and shape information of the diffusion process at each voxel in the dMRI data, and this feature can be a powerful representation to achieve enhanced PD brain mapping. This template brain map construction method is applicable to small animal models as well as to human brains. The differences between the control template brain map and novel patient data can then be assessed via a nonrigid warping algorithm that transforms the novel data into correspondence with the template brain map, thereby capturing the amount of elastic deformation needed to achieve this correspondence. We present the use of a manifold-valued feature called the Cauchy deformation tensor (CDT), which facilitates morphometric analysis and automated classification of a PD versus a control population. Finally, we present preliminary results of automated discrimination between a group of 22 controls and 46 PD patients using CDT. This method may be possibly applied to larger population sizes and other parkinsonian syndromes in the near future.