Search

This paper presents a novel method on the optimization of bi-objective Flexible Job-shop Scheduling Problem (FJSP) under stochastic processing times. The robust counterpart model and the Non-dominated Sorting Genetic Algorithm II (NSGA-II) are used to solve the bi-objective FJSP with consideration of the completion time and the total energy consumption under stochastic processing times. The case study on GM Corporation verifies that the NSGA-II used in this paper is effective and has advantages to solve the proposed model comparing with HPSO and PSO+SA. The idea and method of the paper can be generalized widely in the manufacturing industry, because it can reduce the energy consumption of the energy-intensive manufacturing enterprise with less investment when the new approach is applied in existing systems. [ABSTRACT FROM AUTHOR]

A Mesh topology is one of the most promising architecture due to its regular and simple structure for on-chip communication. Performance of mesh topology degraded greatly by increasing the network size due to small bisection width and large network diameter. In order to overcome this limitation, many researchers presented modified Mesh design by adding some extra links to improve its performance in terms of network latency and power consumption. The Cross-By-Pass-Mesh was presented by us as an improved version of Mesh topology by intelligent addition of extra links. This paper presents an efficient topology named Cross-By-Pass-Torus for further increase in the performance of the Cross-By-Pass-Mesh topology. The proposed design merges the best features of the Cross-By-Pass-Mesh and Torus, to reduce the network diameter, minimize the average number of hops between nodes, increase the bisection width and to enhance the overall performance of the network. In this paper, the architectural design of the topology is presented and analyzed against similar kind of 2D topologies in terms of average latency, throughput and power consumption. In order to certify the actual behavior of proposed topology, the synthetic traffic trace and five different real embedded application workloads are applied to the proposed as well as other competitor network topologies. The simulation results indicate that Cross-By-Pass-Torus is an efficient candidate among its predecessor’s and competitor topologies due to its less average latency and increased throughput at a slight cost in network power and energy for on-chip communication. [ABSTRACT FROM AUTHOR]

With the rapid development of ICT and Web technologies, a large an amount of information is becoming available and this is producing, in some instances, a condition of information overload. Under these conditions, it is difficult for a person to locate and access useful information for making decisions. To address this problem, there are information filtering systems, such as the personalized recommendation system (PRS) considered in this paper, that assist a person in identifying possible products or services of interest based on his/her preferences. Among available approaches, collaborative Filtering (CF) is one of the most widely used recommendation techniques. However, CF has some limitations, e.g., the relatively simple similarity calculation, cold start problem, etc. In this context, this paper presents a new regression model based on the support vector machine (SVM) classification and an improved PSO (IPSO) for the development of an electronic movie PRS. In its implementation, a SVM classification model is first established to obtain a preliminary movie recommendation list based on which a SVM regression model is applied to predict movies’ ratings. The proposed PRS not only considers the movie’s content information but also integrates the users’ demographic and behavioral information to better capture the users’ interests and preferences. The efficiency of the proposed method is verified by a series of experiments based on the MovieLens benchmark data set. [ABSTRACT FROM AUTHOR]

Human activity recognition(HAR) from the temporal streams of sensory data has been applied to many fields, such as healthcare services, intelligent environments and cyber security. However, the classification accuracy of most existed methods is not enough in some applications, especially for healthcare services. In order to improving accuracy, it is necessary to develop a novel method which will take full account of the intrinsic sequential characteristics for time-series sensory data. Moreover, each human activity may has correlated feature relationship at different levels. Therefore, in this paper, we propose a three-stage continuous hidden Markov model (TSCHMM) approach to recognize human activities. The proposed method contains coarse, fine and accurate classification. The feature reduction is an important step in classification processing. In this paper, sparse locality preserving projections (SpLPP) is exploited to determine the optimal feature subsets for accurate classification of the stationary-activity data. It can extract more discriminative activities features from the sensor data compared with locality preserving projections. Furthermore, all of the gyro-based features are used for accurate classification of the moving data. Compared with other methods, our method uses significantly less number of features, and the over-all accuracy has been obviously improved. [ABSTRACT FROM AUTHOR]

For ensemble learning, how to select and combine the candidate classifiers are two key issues which influence the performance of the ensemble system dramatically. Random vector functional link networks (RVFL) without direct input-to-output links is one of suitable base-classifiers for ensemble systems because of its fast learning speed, simple structure and good generalization performance. In this paper, to obtain a more compact ensemble system with improved convergence performance, an improved ensemble of RVFL based on attractive and repulsive particle swarm optimization (ARPSO) with double optimization strategy is proposed. In the proposed method, ARPSO is applied to select and combine the candidate RVFL. As for using ARPSO to select the optimal base RVFL, ARPSO considers both the convergence accuracy on the validation data and the diversity of the candidate ensemble system to build the RVFL ensembles. In the process of combining RVFL, the ensemble weights corresponding to the base RVFL are initialized by the minimum norm least-square method and then further optimized by ARPSO. Finally, a few redundant RVFL is pruned, and thus the more compact ensemble of RVFL is obtained. Moreover, in this paper, theoretical analysis and justification on how to prune the base classifiers on classification problem is presented, and a simple and practically feasible strategy for pruning redundant base classifiers on both classification and regression problems is proposed. Since the double optimization is performed on the basis of the single optimization, the ensemble of RVFL built by the proposed method outperforms that built by some single optimization methods. Experiment results on function approximation and classification problems verify that the proposed method could improve its convergence accuracy as well as reduce the complexity of the ensemble system. [ABSTRACT FROM AUTHOR]

Combinatorial test design is a plan of test that aims to reduce the amount of test cases systematically by choosing a subset of the test cases based on the combination of input variables. The subset covers all possible combinations of a given strength and hence tries to match the effectiveness of the exhaustive set. This mechanism of reduction has been used successfully in software testing research with t-way testing (where t indicates the interaction strength of combinations). Potentially, other systems may exhibit many similarities with this approach. Hence, it could form an emerging application in different areas of research due to its usefulness. To this end, more recently it has been applied in a few research areas successfully. In this paper, we explore the applicability of combinatorial test design technique for Fractional Order (FO), Proportional-Integral-Derivative (PID) parameter design controller, named as FOPID, for an automatic voltage regulator (AVR) system. Throughout the paper, we justify this new application theoretically and practically through simulations. In addition, we report on first experiments indicating its practical use in this field. We design different algorithms and adapted other strategies to cover all the combinations with an optimum and effective test set. Our findings indicate that combinatorial test design can find the combinations that lead to optimum design. Besides this, we also found that by increasing the strength of combination, we can approach to the optimum design in a way that with only 4-way combinatorial set, we can get the effectiveness of an exhaustive test set. This significantly reduced the number of tests needed and thus leads to an approach that optimizes design of parameters quickly. [ABSTRACT FROM AUTHOR]

Background: Scientific literature on cystic echinococcosis (CE) reporting data on risk factors is limited and to the best of our knowledge, no global evaluation of human CE risk factors has to date been performed. This systematic review (SR) summarizes available data on statistically relevant potential risk factors (PRFs) associated with human CE. Methodology/Principal Findings: Database searches identified 1,367 papers, of which thirty-seven were eligible for inclusion. Of these, eight and twenty-nine were case-control and cross-sectional studies, respectively. Among the eligible papers, twenty-one were included in the meta-analyses. Pooled odds ratio (OR) were used as a measure of effect and separately analysed for the two study designs. PRFs derived from case-control studies that were significantly associated with higher odds of outcome were “dog free to roam” (OR 5.23; 95% CI 2.45–11.14), “feeding dogs with viscera” (OR 4.69; 95% CI 3.02–7.29), “slaughter at home” (OR 4.67; 95% CI 2.02–10.78) or at “slaughterhouses” (OR 2.7; 95% CI 1.15–6.3), “dog ownership” (OR 3.54; 95% CI 1.27–9.85), “living in rural areas” (OR 1.83; 95% CI 1.16–2.9) and “low income” (OR 1.68; 95% CI 1.02–2.76). Statistically significant PRFs from cross-sectional studies with higher odds of outcome were “age >16 years” (OR 6.08; 95% CI 4.05–9.13), “living in rural areas” (OR 2.26; 95% CI 1.41–3.61), “being female” (OR 1.38; 95% CI 1.06–1.8) and “dog ownership” (OR 1.37; 95% CI 1.01–1.86). Conclusions/Significance: Living in endemic rural areas, in which free roaming dogs have access to offal and being a dog-owner, seem to be among the most significant PRFs for acquiring this parasitic infection. Results of data analysed here may contribute to our understanding of the PRFs for CE and may potentially be useful in planning community interventions aimed at controlling CE in endemic areas. [ABSTRACT FROM AUTHOR]

Background: Blood-based or urinary biomarkers may play a role in quantifying the future risk of type 2 diabetes (T2D) and in understanding possible aetiological pathways to disease. However, no systematic review has been conducted that has identified and provided an overview of available biomarkers for incident T2D. We aimed to systematically review the associations of biomarkers with risk of developing T2D and to highlight evidence gaps in the existing literature regarding the predictive and aetiological value of these biomarkers and to direct future research in this field. Methods and Findings: We systematically searched PubMed MEDLINE (January 2000 until March 2015) and Embase (until January 2016) databases for observational studies of biomarkers and incident T2D according to the 2009 PRISMA guidelines. We also searched availability of meta-analyses, Mendelian randomisation and prediction research for the identified biomarkers. We reviewed 3910 titles (705 abstracts) and 164 full papers and included 139 papers from 69 cohort studies that described the prospective relationships between 167 blood-based or urinary biomarkers and incident T2D. Only 35 biomarkers were reported in large scale studies with more than 1000 T2D cases, and thus the evidence for association was inconclusive for the majority of biomarkers. Fourteen biomarkers have been investigated using Mendelian randomisation approaches. Only for one biomarker was there strong observational evidence of association and evidence from genetic association studies that was compatible with an underlying causal association. In additional search for T2D prediction, we found only half of biomarkers were examined with formal evidence of predictive value for a minority of these biomarkers. Most biomarkers did not enhance the strength of prediction, but the strongest evidence for prediction was for biomarkers that quantify measures of glycaemia. Conclusions: This study presents an extensive review of the current state of the literature to inform the strategy for future interrogation of existing and newly described biomarkers for T2D. Many biomarkers have been reported to be associated with the risk of developing T2D. The evidence of their value in adding to understanding of causal pathways to disease is very limited so far. The utility of most biomarkers remains largely unknown in clinical prediction. Future research should focus on providing good genetic instruments across consortia for possible biomarkers in Mendelian randomisation, prioritising biomarkers for measurement in large-scale cohort studies and examining predictive utility of biomarkers for a given context. [ABSTRACT FROM AUTHOR]

Modern infrastructure networks are often coupled together and thus could be modeled as interdependent networks. Overload and interdependent effect make interdependent networks more fragile when suffering from attacks. Existing research has primarily concentrated on the cascading failure process of interdependent networks without load, or the robustness of isolated network with load. Only limited research has been done on the cascading failure process caused by overload in interdependent networks. Redundant design is a primary approach to enhance the reliability and robustness of the system. In this paper, we propose two redundant methods, node back-up and dependency redundancy, and the experiment results indicate that two measures are effective and costless. Two detailed models about redundant design are introduced based on the non-linear load-capacity model. Based on the attributes and historical failure distribution of nodes, we introduce three static selecting strategies-Random-based, Degree-based, Initial load-based and a dynamic strategy-HFD (historical failure distribution) to identify which nodes could have a back-up with priority. In addition, we consider the cost and efficiency of different redundant proportions to determine the best proportion with maximal enhancement and minimal cost. Experiments on interdependent networks demonstrate that the combination of HFD and dependency redundancy is an effective and preferred measure to implement redundant design on interdependent networks. The results suggest that the redundant design proposed in this paper can permit construction of highly robust interactive networked systems. [ABSTRACT FROM AUTHOR]

Creativity is a complex, multi-faceted concept encompassing a variety of related aspects, abilities, properties and behaviours. If we wish to study creativity scientifically, then a tractable and well-articulated model of creativity is required. Such a model would be of great value to researchers investigating the nature of creativity and in particular, those concerned with the evaluation of creative practice. This paper describes a unique approach to developing a suitable model of how creative behaviour emerges that is based on the words people use to describe the concept. Using techniques from the field of statistical natural language processing, we identify a collection of fourteen key components of creativity through an analysis of a corpus of academic papers on the topic. Words are identified which appear significantly often in connection with discussions of the concept. Using a measure of lexical similarity to help cluster these words, a number of distinct themes emerge, which collectively contribute to a comprehensive and multi-perspective model of creativity. The components provide an ontology of creativity: a set of building blocks which can be used to model creative practice in a variety of domains. The components have been employed in two case studies to evaluate the creativity of computational systems and have proven useful in articulating achievements of this work and directions for further research. [ABSTRACT FROM AUTHOR]

The Global Financial Crisis of 2007-2008 wiped out US$37 trillions across global financial markets, this value is equivalent to the combined GDPs of the United States and the European Union in 2014. The defining moment of this crisis was the failure of Lehman Brothers, which precipitated the October 2008 crash and the Asian Correction (March 2009). Had the Federal Reserve seen these crashes coming, they might have bailed out Lehman Brothers, and prevented the crashes altogether. In this paper, we show that some of these market crashes (like the Asian Correction) can be predicted, if we assume that a large number of adaptive traders employing competing trading strategies. As the number of adherents for some strategies grow, others decline in the constantly changing strategy space. When a strategy group grows into a giant component, trader actions become increasingly correlated and this is reflected in the stock price. The fragmentation of this giant component will leads to a market crash. In this paper, we also derived the mean-field market crash forecast equation based on a model of fusions and fissions in the trading strategy space. By fitting the continuous returns of 20 stocks traded in Singapore Exchange to the market crash forecast equation, we obtain crash predictions ranging from end October 2008 to mid-February 2009, with early warning four to six months prior to the crashes. [ABSTRACT FROM AUTHOR]

A Hyperspectral (HS) image provides observational powers beyond human vision capability but represents more than 100 times the data compared to a traditional image. To transmit and store the huge volume of an HS image, we argue that a fundamental shift is required from the existing “original pixel intensity”-based coding approaches using traditional image coders (e.g., JPEG2000) to the “residual”-based approaches using a video coder for better compression performance. A modified video coder is required to exploit spatial-spectral redundancy using pixel-level reflectance modelling due to the different characteristics of HS images in their spectral and shape domain of panchromatic imagery compared to traditional videos. In this paper a novel coding framework using Reflectance Prediction Modelling (RPM) in the latest video coding standard High Efficiency Video Coding (HEVC) for HS images is proposed. An HS image presents a wealth of data where every pixel is considered a vector for different spectral bands. By quantitative comparison and analysis of pixel vector distribution along spectral bands, we conclude that modelling can predict the distribution and correlation of the pixel vectors for different bands. To exploit distribution of the known pixel vector, we estimate a predicted current spectral band from the previous bands using Gaussian mixture-based modelling. The predicted band is used as the additional reference band together with the immediate previous band when we apply the HEVC. Every spectral band of an HS image is treated like it is an individual frame of a video. In this paper, we compare the proposed method with mainstream encoders. The experimental results are fully justified by three types of HS dataset with different wavelength ranges. The proposed method outperforms the existing mainstream HS encoders in terms of rate-distortion performance of HS image compression. [ABSTRACT FROM AUTHOR]

Objectives: This paper presents a geographic information system (GIS)-based proximal area method and gravity method for identifying areas with physician shortages. The innovation of this paper is that it uses the appropriate methods to discover each type of health resource and then integrates all these methods to assess spatial access to health resources using population distribution data. In this way, spatial access to health resources for an entire city can be visualized in one neat package, which can help health policy makers quickly comprehend realistic distributions of health resources at a macro level. Methods: First, classify health resources according to the trade areas of the patients they serve. Second, apply an appropriate method to each different type of health resource to measure spatial access to those resources. Third, integrate all types of access using population distribution data. Results: In case study of Shanghai with the fusion method, areas with physician shortages are located primarily in suburban districts, especially in district junction areas. The result suggests that the government of Shanghai should pay more attention to these areas by investing in new or relocating existing health resources. Conclusion: The fusion method is demonstrated to be more accurate and practicable than using a single method to assess spatial access to health resources. [ABSTRACT FROM AUTHOR]

This paper presents an experimental characterization of millimeter-wave (mm-wave) channels in the 6.5 GHz, 10.5 GHz, 15 GHz, 19 GHz, 28 GHz and 38 GHz frequency bands in an indoor corridor environment. More than 4,000 power delay profiles were measured across the bands using an omnidirectional transmitter antenna and a highly directional horn receiver antenna for both co- and cross-polarized antenna configurations. This paper develops a new path-loss model to account for the frequency attenuation with distance, which we term the frequency attenuation (FA) path-loss model and introduce a frequency-dependent attenuation factor. The large-scale path loss was characterized based on both new and well-known path-loss models. A general and less complex method is also proposed to estimate the cross-polarization discrimination (XPD) factor of close-in reference distance with the XPD (CIX) and ABG with the XPD (ABGX) path-loss models to avoid the computational complexity of minimum mean square error (MMSE) approach. Moreover, small-scale parameters such as root mean square (RMS) delay spread, mean excess (MN-EX) delay, dispersion factors and maximum excess (MAX-EX) delay parameters were used to characterize the multipath channel dispersion. Multiple statistical distributions for RMS delay spread were also investigated. The results show that our proposed models are simpler and more physically-based than other well-known models. The path-loss exponents for all studied models are smaller than that of the free-space model by values in the range of 0.1 to 1.4 for all measured frequencies. The RMS delay spread values varied between 0.2 ns and 13.8 ns, and the dispersion factor values were less than 1 for all measured frequencies. The exponential and Weibull probability distribution models best fit the RMS delay spread empirical distribution for all of the measured frequencies in all scenarios. [ABSTRACT FROM AUTHOR]

To eliminate and eradicate gambiense human African trypanosomiasis (HAT), maximizing the effectiveness of active case finding is of key importance. The progression of the epidemic is largely influenced by the planning of these operations. This paper introduces and analyzes five models for predicting HAT prevalence in a given village based on past observed prevalence levels and past screening activities in that village. Based on the quality of prevalence level predictions in 143 villages in Kwamouth (DRC), and based on the theoretical foundation underlying the models, we consider variants of the Logistic Model—a model inspired by the SIS epidemic model—to be most suitable for predicting HAT prevalence levels. Furthermore, we demonstrate the applicability of this model to predict the effects of planning policies for screening operations. Our analysis yields an analytical expression for the screening frequency required to reach eradication (zero prevalence) and a simple approach for determining the frequency required to reach elimination within a given time frame (one case per 10000). Furthermore, the model predictions suggest that annual screening is only expected to lead to eradication if at least half of the cases are detected during the screening rounds. This paper extends knowledge on control strategies for HAT and serves as a basis for further modeling and optimization studies. [ABSTRACT FROM AUTHOR]

The process of Nuclei detection in high-grade breast cancer images is quite challenging in the case of image processing techniques due to certain heterogeneous characteristics of cancer nuclei such as enlarged and irregularly shaped nuclei, highly coarse chromatin marginalized to the nuclei periphery and visible nucleoli. Recent reviews state that existing techniques show appreciable segmentation accuracy on breast histopathology images whose nuclei are dispersed and regular in texture and shape; however, typical cancer nuclei are often clustered and have irregular texture and shape properties. This paper proposes a novel segmentation algorithm for detecting individual nuclei from Hematoxylin and Eosin (H&E) stained breast histopathology images. This detection framework estimates a nuclei saliency map using tensor voting followed by boundary extraction of the nuclei on the saliency map using a Loopy Back Propagation (LBP) algorithm on a Markov Random Field (MRF). The method was tested on both whole-slide images and frames of breast cancer histopathology images. Experimental results demonstrate high segmentation performance with efficient precision, recall and dice-coefficient rates, upon testing high-grade breast cancer images containing several thousand nuclei. In addition to the optimal performance on the highly complex images presented in this paper, this method also gave appreciable results in comparison with two recently published methods—Wienert et al. (2012) and Veta et al. (2013), which were tested using their own datasets. [ABSTRACT FROM AUTHOR]

Stereo matching is essential and fundamental in computer vision tasks. In this paper, a novel stereo matching algorithm based on disparity propagation using edge-aware filtering is proposed. By extracting disparity subsets for reliable points and customizing the cost volume, the initial disparity map is refined through filtering-based disparity propagation. Then, an edge-aware filter with low computational complexity is adopted to formulate the cost column, which makes the proposed method independent on the local window size. Experimental results demonstrate the effectiveness of the proposed scheme. Bad pixels in our output disparity map are considerably decreased. The proposed method greatly outperforms the adaptive support-weight approach and other conditional window-based local stereo matching algorithms. [ABSTRACT FROM AUTHOR]

Encouraging cooperation among selfish individuals is crucial in many real-world systems, where individuals’ collective behaviors can be analyzed using evolutionary public goods game. Along this line, extensive studies have shown that reputation is an effective mechanism to investigate the evolution of cooperation. In most existing studies, participating individuals in a public goods game are assumed to contribute unconditionally into the public pool, or they can choose partners based on a common reputation standard (e.g., preferences or characters). However, to assign one reputation standard for all individuals is impractical in many real-world deployment. In this paper, we introduce a reputation tolerance mechanism that allows an individual to select its potential partners and decide whether or not to contribute an investment to the public pool based on its tolerance to other individuals’ reputation. Specifically, an individual takes part in a public goods game only if the number of participants with higher reputation exceeds the value of its tolerance. Moreover, in this paper, an individual’s reputation can increase or decrease in a bounded interval based on its historical behaviors. We explore the principle that how the reputation tolerance and conditional investment mechanisms can affect the evolution of cooperation in spatial lattice networks. Our simulation results demonstrate that a larger tolerance value can achieve an environment that promote the cooperation of participants. [ABSTRACT FROM AUTHOR]

Citation metrics are increasingly used to appraise published research. One challenge is whether and how to normalize these metrics to account for differences across scientific fields, age (year of publication), type of document, database coverage, and other factors. We discuss the pros and cons for normalizations using different approaches. Additional challenges emerge when citation metrics need to be combined across multiple papers to appraise the corpus of scientists, institutions, journals, or countries, as well as when trying to attribute credit in multiauthored papers. Different citation metrics may offer complementary insights, but one should carefully consider the assumptions that underlie their calculation. [ABSTRACT FROM AUTHOR]

Despite their recognized limitations, bibliometric assessments of scientific productivity have been widely adopted. We describe here an improved method to quantify the influence of a research article by making novel use of its co-citation network to field-normalize the number of citations it has received. Article citation rates are divided by an expected citation rate that is derived from performance of articles in the same field and benchmarked to a peer comparison group. The resulting Relative Citation Ratio is article level and field independent and provides an alternative to the invalid practice of using journal impact factors to identify influential papers. To illustrate one application of our method, we analyzed 88,835 articles published between 2003 and 2010 and found that the National Institutes of Health awardees who authored those papers occupy relatively stable positions of influence across all disciplines. We demonstrate that the values generated by this method strongly correlate with the opinions of subject matter experts in biomedical research and suggest that the same approach should be generally applicable to articles published in all areas of science. A beta version of iCite, our web tool for calculating Relative Citation Ratios of articles listed in PubMed, is available at . [ABSTRACT FROM AUTHOR]

Traffic congestion is an important problem both on an individual and on a societal level and much research has been done to explain and prevent their emergence. There are currently many systems which provide a reasonably good picture of actual road traffic by employing either fixed measurement points on highways or so called “floating car data” i.e. by using velocity and location data from roaming, networked, GPS enabled members of traffic. Some of these systems also offer forecasting of road conditions based on such historical data. To my knowledge there is as yet no system which offers advance notice on road conditions based on a signal which is guaranteed to occur in advance of these conditions and this is the novelty of this paper. Google Search intensity for the German word (i.e. traffic jam) peaks 2 hours ahead of the number of traffic jam reports as reported by the ADAC, a well known German automobile club and the largest of its kind in Europe. This is true both in the morning (7 am to 9 am) and in the evening (4 pm to 6 pm). The main result of this paper is then that after controlling for time-of-day and day-of-week effects we can still explain a significant additional portion of the variation of the number of traffic jam reports with Google Trends and we can thus explain well over 80% of the variation of road conditions using Google search activity. A one percent increase in Google stau searches implies a .4 percent increase of traffic jams. Our paper is a proof of concept that aggregate, timely delivered behavioural data can help fine tune modern societies and prompts for more research with better, more disaggregated data in order to also achieve practical solutions. [ABSTRACT FROM AUTHOR]

This paper presents an interface system based on the Dual Active Bridge (DAB) converter for Photovoltaic (PV) arrays. Two control strategies are proposed for the DAB converter to harvest the maximum power from the PV array. The first strategy is based on a simple PI controller to regulate the terminal PV voltage through the phase shift angle of the DAB converter. The Perturb and Observe (P&O) Maximum Power Point Tracking (MPPT) technique is utilized to set the reference of the PV terminal voltage. The second strategy presented in this paper employs the Artificial Neural Network (ANN) to directly set the phase shift angle of the DAB converter that results in harvesting maximum power. This feed-forward strategy overcomes the stability issues of the feedback strategy. The proposed PV interface systems are modeled and simulated using MATLAB/SIMULINK and the EMTDC/PSCAD software packages. The simulation results reveal accurate and fast response of the proposed systems. The dynamic performance of the proposed feed-forward strategy outdoes that of the feedback strategy in terms of accuracy and response time. Moreover, an experimental prototype is built to test and validate the proposed PV interface system. [ABSTRACT FROM AUTHOR]

This paper proposes a method to predict fluctuations in the prices of cryptocurrencies, which are increasingly used for online transactions worldwide. Little research has been conducted on predicting fluctuations in the price and number of transactions of a variety of cryptocurrencies. Moreover, the few methods proposed to predict fluctuation in currency prices are inefficient because they fail to take into account the differences in attributes between real currencies and cryptocurrencies. This paper analyzes user comments in online cryptocurrency communities to predict fluctuations in the prices of cryptocurrencies and the number of transactions. By focusing on three cryptocurrencies, each with a large market size and user base, this paper attempts to predict such fluctuations by using a simple and efficient method. [ABSTRACT FROM AUTHOR]

The DEM generalization is the basis of multi-dimensional observation, the basis of expressing and analyzing the terrain. DEM is also the core of building the Multi-Scale Geographic Database. Thus, many researchers have studied both the theory and the method of DEM generalization. This paper proposed a new method of generalizing terrain, which extracts feature points based on the tree model construction which considering the nested relationship of watershed characteristics. The paper used the 5 m resolution DEM of the Jiuyuan gully watersheds in the Loess Plateau as the original data and extracted the feature points in every single watershed to reconstruct the DEM. The paper has achieved generalization from 1:10000 DEM to 1:50000 DEM by computing the best threshold. The best threshold is 0.06. In the last part of the paper, the height accuracy of the generalized DEM is analyzed by comparing it with some other classic methods, such as aggregation, resample, and VIP based on the original 1:50000 DEM. The outcome shows that the method performed well. The method can choose the best threshold according to the target generalization scale to decide the density of the feature points in the watershed. Meanwhile, this method can reserve the skeleton of the terrain, which can meet the needs of different levels of generalization. Additionally, through overlapped contour contrast, elevation statistical parameters and slope and aspect analysis, we found out that the W8D algorithm performed well and effectively in terrain representation. [ABSTRACT FROM AUTHOR]

This paper introduces an optimal sizing algorithm for a hybrid renewable energy system using smart grid load management application based on the available generation. This algorithm aims to maximize the system energy production and meet the load demand with minimum cost and highest reliability. This system is formed by photovoltaic array, wind turbines, storage batteries, and diesel generator as a backup source of energy. Demand profile shaping as one of the smart grid applications is introduced in this paper using load shifting-based load priority. Particle swarm optimization is used in this algorithm to determine the optimum size of the system components. The results obtained from this algorithm are compared with those from the iterative optimization technique to assess the adequacy of the proposed algorithm. The study in this paper is performed in some of the remote areas in Saudi Arabia and can be expanded to any similar regions around the world. Numerous valuable results are extracted from this study that could help researchers and decision makers. [ABSTRACT FROM AUTHOR]

Setting: Research capacity is weakest in low and middle-income countries (LMICs) where operational research is highly relevant and needed. Structured Operational Research and Training Initiative (SORT IT) courses have been developed to train participants to conduct and publish operational research and influence policy and practice. Twenty courses were completed in Asia, Africa, Europe and the South Pacific between 2009 and 2014. Objectives: In the 20 completed SORT IT courses, to assess where the research was conducted, who was trained, who became facilitators in subsequent courses and course outcomes. Design: A cohort study of completed SORT IT courses Results: There were 236 participants (41% female) including 64 nationalities who conducted research in 59 countries, mostly from Asia and Africa (mean course duration = 9.7 months). Most participants (68%) were from government health programs and non-governmental agencies. A total of 213(90%) participants completed all milestones successfully with 41(19%) becoming subsequent course facilitators, 88% of whom were from LMICs. Of 228 manuscripts submitted to scientific journals, 197(86%) were either published or in press; in 86%, the principal investigator (first author) was a LMIC national. Papers were published in 23 scientific journals (impact factor 0.5–4.4) and covered 21 disease categories (median publication time = 5.7 months). Published papers (186) had 94,794 cumulative article views/downloads. Article views/downloads for immediate open access articles were double those from closed access journals. Conclusion: The SORT IT model has been effective in training personnel to produce relevant operational research in LMICs. It merits continued commitment and support for further scale-up and development. [ABSTRACT FROM AUTHOR]

Targeted environmental and ecosystem management remain crucial in control of dengue. However, providing detailed environmental information on a large scale to effectively target dengue control efforts remains a challenge. An important piece of such information is the extent of the presence of potential dengue vector breeding sites, which consist primarily of open containers such as ceramic jars, buckets, old tires, and flowerpots. In this paper we present the design and implementation of a pipeline to detect outdoor open containers which constitute potential dengue vector breeding sites from geotagged images and to create highly detailed container density maps at unprecedented scale. We implement the approach using Google Street View images which have the advantage of broad coverage and of often being two to three years old which allows correlation analyses of container counts against historical data from manual surveys. Containers comprising eight of the most common breeding sites are detected in the images using convolutional neural network transfer learning. Over a test set of images the object recognition algorithm has an accuracy of 0.91 in terms of F-score. Container density counts are generated and displayed on a decision support dashboard. Analyses of the approach are carried out over three provinces in Thailand. The container counts obtained agree well with container counts from available manual surveys. Multi-variate linear regression relating densities of the eight container types to larval survey data shows good prediction of larval index values with an R-squared of 0.674. To delineate conditions under which the container density counts are indicative of larval counts, a number of factors affecting correlation with larval survey data are analyzed. We conclude that creation of container density maps from geotagged images is a promising approach to providing detailed risk maps at large scale. [ABSTRACT FROM AUTHOR]

This paper provides an empirical analysis of the distributional properties and statistical regularities of virtual, intra-virtual and traditional currency exchange rates. To perform the analysis, the most relevant virtual, intra-virtual and foreign currency exchange rates between October 2015 and December 2018 are examined. The analysis shows that, in spite of their differing mode of formation, daily log-returns of all currency types share tent-shaped empirical densities, one of the characteristics of a Laplace distribution at semi-log scale. This peculiar property has also been examined thoroughly in other fields of economic literature. Moreover, the empirical results show that virtual and traditional currencies hold the same functional form, even after the 2018 hype. However, in spite of these similarities virtual and intra-virtual currencies display fatter tails and steeper towering peaks than regular foreign currencies which underscores the rather speculative nature of this asset class. [ABSTRACT FROM AUTHOR]

Demand for spring onion seeds is variable and maintaining its supply is crucial to the success of seed companies. Spring onion seed demand forecasting, which can help reduce the high operational costs increased by long-period propagation and complex logistics, has not previously been investigated yet. This paper provides a novel perspective on spring onion seed demand forecasting and proposes a hybrid Holt-Winters and support vector machine (SVM) forecasting model. The model uses dynamic factors, including historical seed sales, seed inventory, spring onion crop market price and weather data, as inputs to forecast spring onion seed demand. Forecasting error, i.e. the difference between actual and forecasted demand, is assessed. Two advanced machine learning models are trained on the same dataset as benchmark models. Numerical experiments using actual commercial sales data for three spring onion seed varieties show the proposed hybrid model outperformed the statistical-based models for all three forecasting errors. Seed inventory, spring onion crop market price and historical seed sales are the most important dynamic factors, among which seed inventory has short-term influence while other two have mid-term influence on seed demand forecasting. The absolute minimum temperature is the only factor having long-term influence. This study provides a promising spring onion seed demand forecasting model that helps understand the relationships between seed demand and other dynamic factors and the model could potentially be applied to demand forecasting of other crop seeds to reduce total operational costs. [ABSTRACT FROM AUTHOR]

As the location trajectory contains more spatial-temporal information about the user, it will be even dangerous for jeopardizing the privacy of the user. In order to cope with the correlation, an algorithm that utilizes the query division had been proposed. In this algorithm, random blocks of query context was used, so as the adversary was obfuscated and difficult to correlate the real result. However, this algorithm fails to dispose the size of each query block, as once same size blocks were obtained by the adversary continuously, so the adversary can regard them as blocks from the same query context, and then obtains the query context to correlate the discrete locations. In view of above conditions, in this paper we propose a fine granularity block division algorithm based on the conception of granularity measurement as well as granularity layer division, so with the help of collaborative users the location privacy of the user will be protected. In this algorithm, the query context will be divided into fine granularity size of information blocks that difficult to be distinguished with others, and then these blocks will be exchanged with other collaborative users to eliminate the difference in block size. In addition, as each block is divided into fine granularity size, the adversary will be difficult to correlate the discrete locations into location trajectory, so the location privacy will be protected. At last, through security analysis and experimental verification, this granularity indistinguishable algorithm is analyzed and verified at both theoretical and practical levels, which further demonstrate the superiority of the proposed algorithm compared with other similar algorithms. [ABSTRACT FROM AUTHOR]

In this paper, we propose a human action recognition method using HOIRM (histogram of oriented interest region motion) feature fusion and a BOW (bag of words) model based on AP (affinity propagation) clustering. First, a HOIRM feature extraction method based on spatiotemporal interest points ROI is proposed. HOIRM can be regarded as a middle-level feature between local and global features. Then, HOIRM is fused with 3D HOG and 3D HOF local features using a cumulative histogram. The method further improves the robustness of local features to camera view angle and distance variations in complex scenes, which in turn improves the correct rate of action recognition. Finally, a BOW model based on AP clustering is proposed and applied to action classification. It obtains the appropriate visual dictionary capacity and achieves better clustering effect for the joint description of a variety of features. The experimental results demonstrate that by using the fused features with the proposed BOW model, the average recognition rate is 95.75% in the KTH database, and 88.25% in the UCF database, which are both higher than those by using only 3D HOG+3D HOF or HOIRM features. Moreover, the average recognition rate achieved by the proposed method in the two databases is higher than that obtained by other methods. [ABSTRACT FROM AUTHOR]

For many disease conditions, tissue samples are colored with multiple dyes and stains to add contrast and location information for specific proteins to accurately identify and diagnose disease. This presents a computational challenge for digital pathology, as whole-slide images (WSIs) need to be properly overlaid (i.e. registered) to identify co-localized features. Traditional image registration methods sometimes fail due to the high variation of cell density and insufficient texture information in WSIs–particularly at high magnifications. In this paper, we proposed a robust image registration strategy to align re-stained WSIs precisely and efficiently. This method is applied to 30 pairs of immunohistochemical (IHC) stains and their hematoxylin and eosin (H&E) counterparts. Our approach advances the existing methods in three key ways. First, we introduce refinements to existing image registration methods. Second, we present an effective weighting strategy using kernel density estimation to mitigate registration errors. Third, we account for the linear relationship across WSI levels to improve accuracy. Our experiments show significant decreases in registration errors when matching IHC and H&E pairs, enabling subcellular-level analysis on stained and re-stained histological images. We also provide a tool to allow users to develop their own registration benchmarking experiments. [ABSTRACT FROM AUTHOR]

Background: Recently we defined a user-friendly tool to assess complexity of patients hospitalized in medical wards. FCS-1 is an average between the Barthel Index and the Exton-Smith score, while FCS-2 is obtained by using the Charlson score. The aim of this paper is to assess the ability of the FCS to predict mortality in-hospital and after 1-3-6-12-months. In this perspective, we performed comparisons with the validated Multidimensional Prognostic Index (MPI). Methods: It is a multicenter, prospective observational study, enrolling patients aged over 40, suffering from at least two chronic diseases and consecutively admitted to Internal Medicine departments. For each patient, data from 13 questionnaires were collected. Survival follow-up was conducted at 1-3-6-12 months after discharge. The relationships between cumulative incidences of death with FCS were investigated with logistic regression analyses. ROC curve analyses were performed in order to compare the predictiveness of the logistic models based on FCS with respect to those with MPI taken as reference. Results: A cohort of 541 patients was evaluated. A 10-point higher value for FCS-1 and FCS-2 leads to an increased risk of 1-year death equal to 25.0% and 27.1%, respectively. In case of in-hospital mortality, the relevant percentages were 63.1% and 15.3%. The logistic model based on FCS is significantly more predictive than the model based on MPI (which requires an almost doubled number of items) for all the time-points considered. Conclusions: Assessment of prognosis of patients has the potential to guide clinical decision-making and lead to better care. We propose a new, efficient and easy-to-use instrument based on FCS, which demonstrated a good predictive power for mortality in patients hospitalized in medical wards. This tool may be of interest for clinical practice, since it well balances feasibility (requiring the compilation of 34 items, taking around 10 minutes) and performance. [ABSTRACT FROM AUTHOR]

The development of high-throughput sequencing technologies for 16S rRNA gene profiling provides higher quality compositional data for microbe communities. Inferring the direct interaction network under a specific condition and understanding how the network structure changes between two different environmental or genetic conditions are two important topics in biological studies. However, the compositional nature and high dimensionality of the data are challenging in the context of network and differential network recovery. To address this problem in the present paper, we proposed two new loss functions to incorporate the data transformations developed for compositional data analysis into D-trace loss for network and differential network estimation, respectively. The sparse matrix estimators are defined as the minimizer of the corresponding lasso penalized loss. Our method is characterized by its straightforward application based on the ADMM algorithm for numerical solution. Simulations show that the proposed method outperforms other state-of-the-art methods in network and differential network inference under different scenarios. Finally, as an illustration, our method is applied to a mouse skin microbiome data. [ABSTRACT FROM AUTHOR]

A new fast busbar protection algorithm based on the comparison of the similarity of back-wave waveforms is proposed in this paper. The S-transform is performed on the back-wave from each defected transmission line connected to the busbar, and the protection criterion is thus constructed by using the Euclidean distance to analyze the similarity of the back-waves, with the implementation of the S-transform between the transmission lines. When a fault occurs internally on the busbar, the Euclidean distance of the S-transformed back-wave between each associated transmission line is small, and there is a remarkable similarity between the waveform. When a fault occurs externally on the busbar, the Euclidean distance of the S-transformed backward traveling wave between the faulty line and the nonfaulty line is larger than that between the nonfaulty lines. The wave-forms of the faulty line and the nonfaulty line bear little similarity, while there is a striking similarity between the nonfaulty lines. Therefore, a protection criterion is established according to the ratio between the maximal similarity and the minimal similarity to discriminate the internal and external faults of the busbar zones. The simulation results show that the proposed busbar protection method can discriminate the internal and external faults of busbar zones in a sensitive and reliable way. [ABSTRACT FROM AUTHOR]

The outcomes of bargaining over losses, the subject of this paper, have rarely been studied. But experimental studies of related situations, such as those involving bankruptcies or bequests in which the sum of the legal claims that can be made against a bank or firm or estate are greater than their values, have produced strong support for the proportionality principle. To test whether this principle would find support in other situations involving losses we designed an experimental game in which four players start out with differing initial endowments of real money. They are then informed that a certain amount of this resource has to be given back to the experimenter. How should the loss be shared among the agents? This game was run at different locations and under different treatments over a period of almost three years. We found that the proportionality principle was rarely proposed and even less frequently accepted as a solution to this problem. One of the main reasons for this result was that the two players with the smallest endowments opposed most of the proposals which asked them to contribute at least some positive amount of their own initial resource. [ABSTRACT FROM AUTHOR]

We investigate the use of Twitter data to deliver signals for syndromic surveillance in order to assess its ability to augment existing syndromic surveillance efforts and give a better understanding of symptomatic people who do not seek healthcare advice directly. We focus on a specific syndrome—asthma/difficulty breathing. We outline data collection using the Twitter streaming API as well as analysis and pre-processing of the collected data. Even with keyword-based data collection, many of the tweets collected are not be relevant because they represent chatter, or talk of awareness instead of an individual suffering a particular condition. In light of this, we set out to identify relevant tweets to collect a strong and reliable signal. For this, we investigate text classification techniques, and in particular we focus on semi-supervised classification techniques since they enable us to use more of the Twitter data collected while only doing very minimal labelling. In this paper, we propose a semi-supervised approach to symptomatic tweet classification and relevance filtering. We also propose alternative techniques to popular deep learning approaches. Additionally, we highlight the use of emojis and other special features capturing the tweet’s tone to improve the classification performance. Our results show that negative emojis and those that denote laughter provide the best classification performance in conjunction with a simple word-level n-gram approach. We obtain good performance in classifying symptomatic tweets with both supervised and semi-supervised algorithms and found that the proposed semi-supervised algorithms preserve more of the relevant tweets and may be advantageous in the context of a weak signal. Finally, we found some correlation (r = 0.414, p = 0.0004) between the Twitter signal generated with the semi-supervised system and data from consultations for related health conditions. [ABSTRACT FROM AUTHOR]

This paper attempts to design an automated, efficient and intelligent tomato grading method that facilitates the graded selling of the fruit. Based on machine vision, the color images of tomatoes with different morphologies were studied, and the color, shape and size were selected as the key features. On this basis, an automated grading classifier was created based on the surface features of tomatoes, and a grading platform was set up to verify the effect of the classifier. Specifically, the Hue value distributions of tomatoes with different maturities were investigated, and the Hue value ranges were determined for mature, semi-mature and immature tomatoes, producing the color classifier. Next, the first-order Fourier descriptor (1D- FD) was adopted to describe the radius sequence of tomato contour, and an equation was established to compute the irregularity of tomato contour, creating the shape classifier. After that, a linear regression equation was constructed to reflect the relationship between the transverse diameters of actual tomatoes and tomato images, and a classifier between large, medium and small tomatoes was produced based on the transverse diameter. Finally, a comprehensive tomato classifier was built based on the color, shape and size diameters. The experimental results show that the mean grading accuracy of the proposed method was 90.7%. This means our method can achieve automated real-time grading of tomatoes. [ABSTRACT FROM AUTHOR]

The olfactory system faces the difficult task of identifying an enormous variety of odors independent of their intensity. Primacy coding, where the odor identity is encoded by the receptor types that respond earliest, might provide a compact and informative representation that can be interpreted efficiently by the brain. In this paper, we analyze the information transmitted by a simple model of primacy coding using numerical simulations and statistical descriptions. We show that the encoded information depends strongly on the number of receptor types included in the primacy representation, but only weakly on the size of the receptor repertoire. The representation is independent of the odor intensity and the transmitted information is useful to perform typical olfactory tasks with close to experimentally measured performance. Interestingly, we find situations in which a smaller receptor repertoire is advantageous for discriminating odors. The model also suggests that overly sensitive receptor types could dominate the entire response and make the whole array useless, which allows us to predict how receptor arrays need to adapt to stay useful during environmental changes. Taken together, we show that primacy coding is more useful than simple binary and normalized coding, essentially because the sparsity of the odor representations is independent of the odor statistics, in contrast to the alternatives. Primacy coding thus provides an efficient odor representation that is independent of the odor intensity and might thus help to identify odors in the olfactory cortex. [ABSTRACT FROM AUTHOR]

Image segmentation applied to medical image analysis is still a critical and important task. Although there exist several segmentation algorithms that have been widely studied in literature, these are subject to segmentation problems such as over- and under-segmentation as well as non-closed edges. In this paper, a simple method that combines well-known segmentation algorithms is presented. This method is applied to detect acid-fast bacilli (AFB) in bacilloscopies used to diagnose pulmonary tuberculosis (TB). This diagnosis can be performed through different tests, and the most used worldwide is smear microscopy because of its low cost and effectiveness. This diagnosis technique is based on the analysis and counting of the bacilli in the bacilloscopy observed under an optical microscope. The proposed method is used to segment the bacilli in digital images from bacilloscopies processed using Ziehl-Neelsen (ZN) staining. The proposed method is fast, has a low computational cost and good efficiency compared to other methods. The bacilli image segmentation is performed by image processing and analysis techniques, probability concepts and classifiers. In this work, a Bayesian classifier based on a Gaussian mixture model (GMM) is used. The segmentations' results are validated by using the Jaccard index, which indicates the efficiency of the classifier. [ABSTRACT FROM AUTHOR]

In this paper, a method was developed to assess the vertical response of piles considering crushing characteristics. A load transfer model of a pile is built and the relationship between the crushing characteristics and load transfer function of a pile was analyzed. Based on the analysis results, the transfer equation of load function considering the crushing characteristics was derived using the finite difference method. The ideal side resistance and the load transfer mechanism of a pile can be obtained by the transfer equation of load function. The predicted response of piles with the proposed method is in good agreement with the response observed in some pile tests reported in the literature. Further study was conducted to discuss the effect of the parameters related to the load transfer model considering crushing characteristics on the load-settlement response of a single pile. [ABSTRACT FROM AUTHOR]

This paper is dedicated to the analysis of the improvement of heat transfer and the reduction of the pressure losses induced by the use of an active exchanger of millimeter size in a cooling loop. For pressure conditions imposed at the terminals of such a mini-channel whose upper wall is deformed by a progressive sinusoidal wave and for low Reynolds numbers (Re < 1000), we study the influence of the deformation parameters on the thermo-hydraulic performance of the exchanger (flow, heat transfer). The mechanical power applied to the deformed wall is connected to these parameters as well as to the pressure difference imposed by the external pump. The overall performance increases slightly with the value of the mechanical power up to a critical value for a given wall corrugation. Nevertheless, overall performance is up to 2 orders of magnitude higher than conventional static corrugated channels. [ABSTRACT FROM AUTHOR]

Lack of homogeneity in the product (LHP) is a problem when customers require homogeneous units of a single product. In such cases, the optimal allocation of inventory to orders becomes much more complex. Furthermore, in an MTS environment, an optimal initial allocation may become less than ideal over time, due to different circumstances. This problem occurs in the ceramics sector, where the final product varies in tone and calibre. This paper proposes a methodology for the reallocation of inventory to orders in LHP situation (MERIO-LHP) and a model-based decision-support system (DSS) to support the methodology, which enables an optimal reallocation of inventory to order lines to be carried out in real businesses environments in which LHP is inherent. The proposed methodology and model-based DSS were validated by applying it to a real case at a ceramics company. The analysis of the results indicates that considerable improvements can be obtained with regard to the quantity of orders fulfilled and sales turnover. [ABSTRACT FROM AUTHOR]

People are connected by various social networks, resulting in the interdependence of consumer choice. Therefore, it is very important and realistic to assume choice interdependence in private car ownership modeling. In this paper, we investigate the interdependence of private car ownership choice using a spatial autoregressive binary probit model estimated by the Bayesian Markov chain Monte Carlo (MCMC) method. Constructing the autoregressive matrix demographically shows that the private car ownership choice of a household is dependent on other household choices. Compared with the pure binary probit model estimated by the MCMC method, the spatial autoregressive model achieves a significant improvement both in loglikelihood value and log marginal density value, which are calculated using the importance sampling method of Newton and Raftery, from approximately -202 to approximately -63 and from -208 to -145, respectively. Moreover, the results indicated by the spatial autoregressive probit model suggest that the number of children, the ownership of an apartment or the availability of a parking lot are positively and significantly associated with the private car ownership level. To test the out-of-sample performance of the model, we estimate the model using 600 data points and test it using another 148 data points. The results indicate that the predictive power is greatly improved. Finally, we analyze the augmented parameter and discover that it is associated with the parking variable in addition to the license variable. [ABSTRACT FROM AUTHOR]

Background: CD4 cell counts is widely used as a biomarker for treatment progression when studying the efficacy of drugs to treat HIV-infected patients. In the past, it had been also used in determining eligibility to initiate antiretroviral therapy. The main aim of this was to model the evolution of CD4 counts over time and use this model for an early prediction of subject-specific time to cross a pre-specified CD4 threshold. Methods: Hospital based retrospective cohort study of HIV-infected patients was conducted from January 2009 to December 2014 at University of Gondar hospital, Northwest Ethiopia. Fractional polynomial random effect model is used to model the evolution of CD4 counts over time in response to treatment and to estimate the individual probability to be above a pre-selected CD4 threshold. Human subject research approval for this study was received from University of Gondar Research Ethics Committee and the medical director of the hospital. Results: A total of 1347 patients were included in the analysis presented in this paper. The cohort contributed a total of 236.58 per 100 person-years of follow-up. Later the data were divided into two periods: the first is the estimation period in which the parameters of the model are estimated and the second is the prediction period. Based on the parameters from the estimation period, model based prediction for the time to cross a threshold was estimated. The correlations between observed and predicted values of CD4 levels in the estimation period were 0.977 and 0.982 for Neverapine and Efavirenz containing regimens, respectively; while the correlation between the observed and predicted CD4 counts in the prediction period are 0.742 and 0.805 for NVP and EFV, respectively. Conclusions: The model enables us to estimate a subject-specific expected time to cross a CD4 threshold and to estimate a subject-specific probability to have CD4 count above a pre-specified threshold at each time point. By predicting long-term outcomes of CD4 count of the patients one can advise patient about the potential ART benefits that accrue in the long-term. [ABSTRACT FROM AUTHOR]

The user interaction in online social networks can not only reveal the social relationships among users in e-commerce systems, but also imply the social preferences of a target user for recommendation services. However, the current research has rarely explored the impact of social interaction on recommendation performance, especially now that recommender systems face increasing challenges and suffer from poor efficiency due to social data overload. Therefore, applied research on user interaction has become increasingly necessary in the field of social recommendation. In this paper, we develop a novel social recommendation method based on the user interaction in complex social networks, called the SRUI model, to present a basis for improving the efficiency of the recommender systems. Specifically, a weighted social interaction network is first mapped to represent the interactions among social users according to the gathered information about historical user behavior. Thereafter, the complete path set is mined by the complete path mining (CPM) algorithm to find social similar neighbors with tastes similar to those of the target user. Finally, the social similar tendencies of the users on the complete paths are obtained to predict the final ratings of items through the SRUI model. A series of experimental results based on two real public datasets show that our approach performs better than other state-of-the-art methods in terms of recommendation performance. [ABSTRACT FROM AUTHOR]

Several studies have shown that the performance of a supply chain is heavily influenced by the pattern of relationships among firms. This paper analyzes the structure of relationships (network topology) that leads to the highest agility of a food supply chain when sudden demand changes occur. To do this, a simulation model that represents a supply chain and specific rules to allocate orders is built. The supply chain in the model follows the specific characteristics of trade in the primary sector. The model is fitted to the conditions of a real seafood supply chain in Mexico. Agility is measured through the effect on the order fulfillment of a sudden demand shock and the recovery time of this rate to previous values. The simulation results show that the most suitable structure depends on how product is distributed among suppliers. If product is evenly shared, supply chains with homogeneous topologies are more agile than supply chains with heterogeneous topologies, but the result is the opposite if product is unevenly shared among suppliers. Other previous recommendations, such as having multiple suppliers and horizontal links, are confirmed by the simulations. These findings contribute to the general debate on which is the optimal topology for an agile supply chain. [ABSTRACT FROM AUTHOR]

Predicting the socio-economic level of an urban region is of great significance for governments and city managers when allocating resources and making decisions. However, the current approaches for estimating regional socio-economic levels heavily rely on census data, which demands significant effort in terms of time and money. With the ubiquitous usage of smart phones and the prevalence of mobile applications, massive amounts of data are generated by mobile networks that record people’s behaviors. In this paper, we propose a low-cost approach of using humans’ online and offline indicators to predict the socio-economic levels of urban regions. The results show that the socio-economic prediction model that is trained using online and offline features extracted from these data achieves a high accuracy over 85%. Notably, online features are showed to be tightly linked with socio-economic development. In environments where censuses are rarely held, our method provides an option for timely and accurate prediction of the economic status of urban regions. [ABSTRACT FROM AUTHOR]

Air pollution inhaled dose is the product of pollutant concentration and minute ventilation (). Previous studies have parameterized the relationship between and variables such as heart rate (HR) and have observed substantial inter-subject variability. In this paper, we evaluate a method to estimate with easy-to-measure variables in an analysis of pooled-data from eight independent studies. We compiled a large diverse data set that is balanced with respect to age, sex and fitness level. We used linear mixed models to estimate with HR, breath frequency (fB), age, sex, height, and forced vital capacity (FVC) as predictors. FVC was estimated using the Global Lung Function Initiative method. We log-transformed the dependent and independent variables to produce a model in the form of a power function and assessed model performance using a ten-fold cross-validation procedure. The best performing model using HR as the only field-measured parameter was = e-9.59HR2.39age0.274sex-0.204FVC0.520 with HR in beats per minute, age in years, sex is 1 for males and 2 for females, FVC in liters, and a median(IQR) cross-validated percent error of 0.664(45.4)%. The best performing model overall was = e-8.57HR1.72fB0.611age0.298sex-0.206FVC0.614, where fB is breaths per minute, and a median(IQR) percent error of 1.20(37.9)%. The performance of these models is substantially better than any previously-published model when evaluated using this large pooled-data set. We did not observe an independent effect of height on , nor an effect of race, though this may have been due to insufficient numbers of non-white participants. We did observe an effect of FVC such that these models over- or under-predict in persons whose measured FVC was substantially lower or higher than estimated FVC, respectively. Although additional measurements are necessary to confirm this finding regarding FVC, we recommend using measured FVC when possible. [ABSTRACT FROM AUTHOR]

In this paper, we explore the (in)efficiency of the continuum Bitcoin-USD market in the period ranging from mid 2010 to early 2019. To deal with, we dynamically analyse the evolution of the self-similarity exponent of Bitcoin-USD daily returns via accurate FD4 approach by a 512 day sliding window with overlapping data. Further, we define the memory indicator by the difference between the self-similarity exponent of Bitcoin-USD series and the self-similarity index of its shuffled series. We also carry out additional analyses via FD4 approach by sliding windows of sizes equal to 64, 128, 256, and 1024 days, and also via FD algorithm for values of q equal to 1 and 2 (and sliding windows equal to 512 days). Moreover, we explored the evolution of the self-similarity exponent of actual S&P500 series via FD4 algorithm by sliding windows of sizes equal to 256 and 512 days. In all the cases, the obtained results were found to be similar to our first analysis. We conclude that the self-similarity exponent of the BTC-USD (resp., S&P500) series stands above 0.5. However, this is not due to the presence of significant memory in the series but to its underlying distribution. In fact, it holds that the self-similarity exponent of BTC-USD (resp., S&P500) series is similar or lower than the self-similarity index of a random series with the same distribution. As such, several periods with significant antipersistent memory in BTC-USD (resp., S&P500) series are distinguished. [ABSTRACT FROM AUTHOR]