Search

In this work, a tube extrusion-shear-expanding (TESE) process was proposed to develop a high-performance magnesium alloy thin-walled tube, and then a comparison was made with the direct extrusion (DE) process. The microstructure and mechanical properties of magnesium alloy tubes under different processes were tested and analyzed. Numerical simulations were conducted by using DEFORMTM-3D software to predict the effective stresses, forming loads, and effective strains during the forming of magnesium alloy tubes. Compared with DE process, the TESE process with high effective stresses, effective strains, and forming loads generates a severe plastic deformation of the tube, leading to a more obvious grain refinement effect on the fabricated tube with a tensile strength of around 293 MPa and an elongation of around 15%. The results show that the TESE process has obvious advantages. The critical shear force and dynamic recrystallization further refine the grains and weaken the basal texture strength. The comprehensive performance of magnesium alloy tube is improved. [ABSTRACT FROM AUTHOR]

The efficacy of epidermal growth factor receptor-tyrosine kinase inhibitors (EGFR-TKI) in patients with non-small cell lung cancer (NSCLC) is related to EGFR mutations. Although the p.L858R point mutation in exon 21 and the in-frame deletion mutation in exon 19 are well known, efficacy of EGFR-TKI in patients with more than one EGFR mutation is not well understood. 799 NSCLC patients were screened for EGFR mutations. Of the 799 patients, 443 (55.4%) had mutations, out of which 22 (2.75%) had multiple complex mutations. Most multiple mutations (20/22) harbored common mutations such as the p.L858R point mutation in exon 21 and the in-frame deletion mutation in exon 19. 11 out of 22 patients who had multiple EGFR mutations underwent TKI therapy and primary end-points of progression free and overall survival were determined. Our analysis revealed that cases with multiple mutations had similar end-point outcomes as single mutation to TKI therapy. Report of these cases will be helpful in decision making for treatment of NSCLC patients harboring multiple EGFR mutations. [ABSTRACT FROM AUTHOR]

Context: The reaction between Na and HF is a typical harpooning reaction which is of great interest due to its significance in understanding the elementary chemical reaction kinetics. This work aims to investigate the detailed reaction mechanisms of sodium with hydrogen fluoride and the adsorption of HF on the resultant NaF as well as the (NaF)4 tetramer. The results suggest that the reaction between Na and HF leads to the formation of sodium fluoride salt NaF and hydrogen gas. Na interacts with HF to form a complex HF···Na, and then the approaching of F atom of HF to Na results in a transition state H···F···Na. Accompanied by the broken of H-F bond, the bond forms between F and Na atoms as NaF, then the product NaF is yielded due to the removal of H atom. The resultant NaF can further form (NaF)4 tetramer. The interaction of NaF with HF leads to the complex NaF···HF; the form I as well as II of (NaF)4 can interact with HF to produce two complexes (i.e., (NaF)4(I-1)···HF, (NaF)4(I-2)···HF, (NaF)4(II-1)···HF and (NaF)4(II-2)···HF), but the form III of (NaF)4 can interact with HF to produce only one complex (NaF)4(III)···HF. These complexes were explored in terms of noncovalent interaction (NCI) and quantum theory of atoms in molecules (QTAIM) analyses. NCI analyses confirm the existences of attractive interactions in the complexes HF···Na, NaF···HF, (NaF)4(I-1)···HF, (NaF)4(I-2)···HF, (NaF)4(II-1)···HF and (NaF)4(II-2)···HF, and (NaF)4(III)···HF. QTAIM analyses suggest that the F···Na interaction forms in the HF···Na complex while the F···H hydrogen bonds form in NaF···HF, (NaF)4(I-1)···HF, (NaF)4(I-2)···HF, (NaF)4(II-1)···HF and (NaF)4(II-2)···HF, and (NaF)4(III)···HF complexes. Natural bond orbital (NBO) analyses were also applied to analyze the intermolecular donor-acceptor orbital interactions in these complexes. These results would provide valuable insight into the chemical reaction of Na and HF and the adsorption interaction between sodium fluoride salt and HF. Methods: The calculations were carried out at the M06-L/6-311++G(2d,2p) level of theory which were performed using the Gaussian16 program. Intrinsic reaction coordinate (IRC) calculations were carried out at the same level of theory to confirm that the obtained transition state was true. The molecular surface electrostatic potential (MSEP) was employed to understand how the complex forms. Quantum theory of atoms in molecules (QTAIM) and noncovalent interaction (NCI) analysis was used to know the topology parameters at bond critical points (BCPs) and intermolecular interactions in the complex and intermediate. The topology parameters and the BCP plots were obtained by the Multiwfn software. [ABSTRACT FROM AUTHOR]

Cases of arthroscopic surgery have increased over the past two decades, and arthroscopic shaver systems have become a commonly used orthopedic tool. Nevertheless, most shavers generally have problems such as the cutting edge is not sharp enough and easy to wear. This paper aims to discuss the structural characteristics of BJKMC's (Bojin◊ Kinetic Medical) novel arthroscopic shaver, the double serrated blade. The product's design and verification process are outlined. BJKMC's articular arthroscopy shaver has a "tube in a tube" structure, comprising a stainless steel outer sleeve and a rotating hollow inner tube. The outer sleeve and inner tube have corresponding suction and cutting windows, and there are serrated teeth on the inner and outer casing. To verify the design rationality, it was compared to Dyonics◊'s equivalent product, the Incisor◊ Plus Blade. The appearance, cutting tool hardness, metal pipe roughness, cutting tool wall thickness, tooth profile, and angle, overall structure, and the key dimensions were examined and compared. Compared with Dyonics◊'s Incisor◊ Plus Blade, BJKMC's Double Serrated Blade had a smoother working surface, harder and thinner blade head. Therefore, BJKMC's product may have satisfactory performance when it comes to surgery. [ABSTRACT FROM AUTHOR]

Acoustic emission signals are relevant to the process of rock failure. In this paper, acoustic emission waveform signals during rock loading are acquired through uniaxial compression test of granite in laboratory. Short-time Fourier transform is used to analyze the acoustic emission signals during rock fracture to obtain the peak frequency. Based on the peak frequency of acoustic emission, four types of acoustic emission signals are classified by using fuzzy C-means method. The parameters of different types of acoustic emission signals are analyzed, which include ring count, duration, amplitude and energy. Meanwhile, the progressive propagation of surface cracks in rock specimens is quantitatively analyzed by digital image correlation (DIC) technology. The result shows that different types of acoustic emission signals correspond to different strength of rock fracture. Before rock fracture, high-count, long-duration and high-energy precursory characteristic signals appear intensively. The event density Den t = 1 is taken as the early warning threshold of rock fracture through the quantitative analysis of acoustic emission signal. The present results of the research show the usefulness of the DIC and acoustic emission techniques in experiment of that type. [ABSTRACT FROM AUTHOR]

Multi-structured Ag/MnO2-cordierite molded catalysts were prepared by hydrothermal method and applied to the catalytic oxidation of VOCs. Catalytic activities of Ag/MnO2-cordierite were evaluated by 1000 ppm of toluene, ethyl acetate and chlorobenzene degradation respectively at the air atmosphere, and their physicochemical properties were characterized through multiple techniques containing XRD, SEM, TEM, H2-TPR and XPS. It is found that nanorod Ag/MnO2-cordierite molded catalyst showed prominent catalytic activity for VOCs decomposition and the T90 for toluene, ethyl acetate and chlorobenzene are 275 °C, 217 °C and 385 °C respectively under the space velocity of 10,000 h−1. High valence manganese oxide, more active lattice oxygen proportion and superior low-temperature reducibility were the great contributors to the high activity of the catalyst with nanorod morphology. Studies of space velocity and catalytic stability over nanorod Ag/MnO2-cordierite molded catalyst have confirmed the good catalytic performance, excellent mechanical strength and satisfied anti-toxicity to Cl at higher space velocity, which indicates that this molded catalyst have promise for industrial application. [ABSTRACT FROM AUTHOR]

Conventional wastewater purification technologies consume large amounts of energy, while the abundant chemical energy and nutrient resources contained in sewage are wasted in such treatment processes. A microbial nutrient recovery cell (MNRC) has been developed to take advantage of the energy contained in wastewater, in order to simultaneously purify wastewater and recover nutrient ions. When wastewater was circulated between the anode and cathode chambers of the MNRC, the organics (COD) were removed by bacteria while ammonium and phosphate (NH4+-N and PO43−-P) were recovered by the electrical field that was produced using in situ energy in the wastewater without additional energy input. The removal efficiencies from wastewater were >82% for COD, >96% for NH4+-N, and >64% for PO43−-P in all the operational cycles. Simultaneously, the concentrations of NH4+ and PO43− in the recovery chamber increased to more than 1.5 and 2.2 times, respectively, compared with the initial concentrations in wastewater. The MNRC provides proof-of-concept as a sustainable, self-driven approach to efficient wastewater purification and nutrient recovery in a comprehensive bioelectrochemical system. [ABSTRACT FROM AUTHOR]