6,944 results
Search Results
52. Robust Matrix Completion with Heavy-tailed Noise.
- Author
-
Wang, Bingyan and Fan, Jianqing
- Abstract
AbstractThis paper studies noisy low-rank matrix completion in the presence of heavy-tailed and possibly asymmetric noise, where we aim to estimate an underlying low-rank matrix given a set of highly incomplete noisy entries. Though the matrix completion problem has attracted much attention in the past decade, there is still lack of theoretical understanding when the observations are contaminated by heavy-tailed noises. Prior theory falls short of explaining the empirical results and is unable to capture the optimal dependence of the estimation error on the noise level. In this paper, we adopt an adaptive Huber loss to accommodate heavy-tailed noise, which is robust against large and possibly asymmetric errors when the parameter in the Huber loss function is carefully designed to balance the Huberization biases and robustness to outliers. Then, we propose an efficient nonconvex algorithm via a balanced low-rank Burer-Monteiro matrix factorization and gradient descent with robust spectral initialization. We prove that under merely a bounded second-moment condition on the error distributions, rather than the sub-Gaussian assumption, the Euclidean errors of the iterates generated by the proposed algorithm decrease geometrically fast until achieving a minimax-optimal statistical estimation error, which has the same order as that in the sub-Gaussian case. The key technique behind this significant advancement is a powerful leave-one-out analysis framework. The theoretical results are corroborated by our numerical studies. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
53. Mechanical properties, thermal and chemical effect of polymer cotton bars reinforced with carbon / glass fiber.
- Author
-
Abdullah, Khalid A., Abdullah, Aziz I., Abdul-Razzak, Ayad A., and Al-Gburi, Majid
- Subjects
- *
REINFORCING bars , *GLASS fibers , *COTTON fibers , *NATURAL fibers , *MODULUS of elasticity , *STRESS-strain curves , *CARBON fiber-reinforced plastics - Abstract
Many researchers are interested in using natural fibres to treat due to recent advancements in polymer characteristics. The mechanical properties of three types of bars are studied in this paper: Cotton Fibre-Reinforced Polymer bars, Cotton/Carbon Fibre-Reinforced Polymer bars, and Cotton/Glass Fibre-Reinforced Polymer bars. The goal of the paper was to create low-cost bars with comparable mechanical performance and corrosion resistance to steel reinforcement. The bars were made using two methods: fibres immersed in polymer and fibres coated with polymer by repeated tension and relaxation of fibres. The second method produced better results in terms of the tensile strength of Cot.CFRP, Cot.GFRP, and Cot.FRP bars, which were 688, 477, and 284 MPa, respectively, and the stress–strain curve revealed brittle behaviour for all bars and modulus of elasticity of 43, 31 and 22 GPa. When sand was put on the bar's surface, the bars demonstrated a good connection with the concrete. It also showed good resistance to moisture, alkaline solutions and acids, as well as heat resistance at temperatures below 200°C. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
54. A review: carbon nanotubes composite to enhance thermal & electrical properties for the space applications.
- Author
-
Vartak, Dhaval A., Ghotekar, Yogesh, Bhatt, Pina M., Makwana, Bharat, Shah, HN, and Vadher, JA
- Subjects
- *
CARBON nanotubes , *CARBON composites , *THERMAL properties , *FILLER materials , *LIGHTWEIGHT materials , *METALLIC composites - Abstract
The high specific stiffness materials are used to design the space payload components. These components should sustain the extreme environmental condition throughout their life cycle without failure. The prerequisites of future space missions need lightweight materials which must be mechanically strong and high thermal and electrically conductive. The Carbon Nanotubes (CNTs) are efficient filler material in composite or metal matrix to enhance greater electrical and thermal conductivity. The quality of the CNT nano composite relies upon several parameters like the types of CNTs, its purity, aspect ratio, amount of loading, alignment, and interfacial adhesion between the nanotube and polymer. The performance of the CNT-CFRP composite depends on the successful execution of the processing technique. This review paper intends to highlight the enhancement of the mechanical, thermal, electrical properties of the composite, and the challenges to achieving it. This review paper helps to optimise the process parameters to fabricate Space Payload Components, required to replace existing high-density Space Qualified Materials. This review paper should help optimize the process parameters to fabricate Space Payload Components, which can be excellent alternatives to the existing high-density Space Qualified Materials without making any compromise on the performance index. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
55. Enhanced Response Envelope via Envelope Regularization.
- Author
-
Kwon, Oh-Ran and Zou, Hui
- Abstract
AbstractThe response envelope model provides substantial efficiency gains over the standard multivariate linear regression by identifying the material part of the response to the model and by excluding the immaterial part. In this paper, we propose the enhanced response envelope by incorporating a novel envelope regularization term based on a nonconvex manifold formulation. It is shown that the enhanced response envelope can yield better prediction risk than the original envelope estimator. The enhanced response envelope naturally handles high-dimensional data for which the original response envelope is not serviceable without necessary remedies. In an asymptotic high-dimensional regime where the ratio of the number of predictors over the number of samples converges to a non-zero constant, we characterize the risk function and reveal an interesting double descent phenomenon for the envelope model. A simulation study confirms our main theoretical findings. Simulations and real data applications demonstrate that the enhanced response envelope does have significantly improved prediction performance over the original envelope method, especially when the number of predictors is close to or moderately larger than the number of samples. Proofs and additional simulation results are shown in the supplementary file to this paper. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
56. Italian Community Co-operatives: Structuration of Community Development Processes in Italy.
- Author
-
Michele, Bianchi
- Subjects
- *
COOPERATIVE societies , *EQUALITY , *SEMI-structured interviews , *NEGOTIATION , *NONPROFIT sector - Abstract
Italy is famous worldwide for its co-operative sector, and this firm model has proven to be efficacious in redressing many social inequalities over the past two centuries. This paper aims to examine how local communities in diverse regions have adapted this traditional form to the contemporary trend of bottom-up community development processes. Furthermore, the paper compares the Italian initiatives with the international literature on community co-operatives and assesses to which extend similarities and differences are viewable. The qualitative analysis considers 7 co-operatives in various areas of Italy, and analyses result from 15 semi-structured interviews with managers. Findings show the intense work undertaken before the co-operatives' registration, the negotiation of purposes and objectives with external partners, how founder groups have a key role in determining each firm's approach to local development, and how further networks with external subjects are deeply influence the co-operatives' work. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
57. A political economy analysis of changes and continuities in Iran–Africa trade relations: a case of South–South dependency?
- Author
-
Lob, Eric and Yilmazkuday, Hakan
- Abstract
This paper provides a political economy analysis of the bilateral trade relations and patterns of exchange that existed between Iran and Sub-Saharan Africa (SSA) from 1962 to 2021. The paper contributes to the growing literature on Iran–Africa relations by empirically delineating not just the changes, but also the continuities between Iran and its African trading partners before and after the Iranian Revolution. It also adds nuance to the broader scholarship on South–South cooperation by showing the disparity between the rhetoric of South–South solidarity and reciprocity between Iran and SSA, on one side, and their low and fluctuating trade volumes, on the other. These volumes resulted from historical inertia or path dependency and structural factors, including trade complementarities and geopolitical conditions, more than demographic, cultural, or religious realities. They were also shaped by the agency and decision-making of Iranian and African leaders and officials regarding the extent to economically engage with each other. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
58. 'Regionalism' and its contestations: changing political discourse in contemporary Assam.
- Author
-
Borah, Partha Pratim and Bhuyan, Ankur Jyoti
- Subjects
- *
POLITICAL change , *REGIONALISM , *NATIONAL character , *DISCOURSE , *ETHNICITY - Abstract
This paper seeks to understand the socio-political dimension of the political changes in Assam vis-a-vis "regionalism" and its contestations. The Changing contours of regionalism in Assam reflect its distinct character marked by the simultaneous articulation of regional, sub-regional and national identity in a complex socio-ethnic and historical context. The recent political trajectory of Assam bears testimony to the dual challenges facing the forces of regionalism; the presence of sub-regional ethnic identity articulation and the appropriation of regional space and issues by the national parties. Further, the shifting allegiance of ethnic identity-based parties to the national parties is critical to understand the dynamics of regionalism in Assam. Socio-political developments subsequent to the rise of BJP post-2014 provide an interesting landscape to comprehend the complexities inherent in understanding regionalism in contemporary Assam. On a contextual note, the paper also locates the question of regionalism in the ongoing debates of NRC and CAA. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
59. Peat replacement in horticultural growth media: the adequacy of coir, paper sludge and biogas digestate as growth medium constituents for tomato (Solanum lycopersicum L.) and lettuce (Lactuca sativa L.).
- Author
-
Nesse, Astrid Solvåg, Sogn, Trine, Børresen, Trond, and Foereid, Bente
- Subjects
- *
TOMATOES , *BIOGAS , *LETTUCE , *HORTICULTURE , *PLANT biomass , *PLANT growth - Abstract
Purpose: Due to environmental concerns, efforts are made to replace the use of peat in horticultural growth media by organic wastes. Four growth media were prepared with the purpose of achieving adequate physical and chemical properties for plant production. Materials and methods: Growth media prepared from mixtures of coir (C) and paper sludge (P), respectively, with two biogas digestates from food waste (D1 and D2), were tested. These mixtures, 20% D1 or D2 + 80% C or P (v/v), were evaluated as growth media for tomato (Solanum lycopersicum L.) and lettuce (Lactuca sativa L.). Results and conclusion: The growth media were all physically stable during the growing period, provided all the macronutrients and most of the micronutrients necessary for plant growth, adequate pH conditions, as well as an adequate electrical conductivity. The mixture of D2 and P produced the highest biomass compared to a mineral fertilised peat (control), with a biomass production of 76% of the control for lettuce and 54% for tomato. Causes for the biomass reduction relative to the control may be related to ammonium toxicity effects, and/or limited plant-available water. The digestates, particularly D1, seemed also to have a phytotoxic effect on the germination. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
60. What Have We (Not) Learnt from Millions of Scientific Papers with P Values?
- Author
-
Ioannidis, John P. A.
- Subjects
- *
P-value (Statistics) , *STATISTICAL bias , *STATISTICAL hypothesis testing , *NULL hypothesis , *INFERENTIAL statistics , *BAYESIAN analysis - Abstract
P values linked to null hypothesis significance testing (NHST) is the most widely (mis)used method of statistical inference. Empirical data suggest that across the biomedical literature (1990–2015), when abstracts use P values 96% of them have P values of 0.05 or less. The same percentage (96%) applies for full-text articles. Among 100 articles in PubMed, 55 report P values, while only 4 present confidence intervals for all the reported effect sizes, none use Bayesian methods and none use false-discovery rate. Over 25 years (1990–2015), use of P values in abstracts has doubled for all PubMed, and tripled for meta-analyses, while for some types of designs such as randomized trials the majority of abstracts report P values. There is major selective reporting for P values. Abstracts tend to highlight most favorable P values and inferences use even further spin to reach exaggerated, unreliable conclusions. The availability of large-scale data on P values from many papers has allowed the development and applications of methods that try to detect and model selection biases, for example, p-hacking, that cause patterns of excess significance. Inferences need to be cautious as they depend on the assumptions made by these models and can be affected by the presence of other biases (e.g., confounding in observational studies). While much of the unreliability of past and present research is driven by small, underpowered studies, NHST with P values may be also particularly problematic in the era of overpowered big data. NHST and P values are optimal only in a minority of current research. Using a more stringent threshold, as in the recently proposed shift from P < 0.05 to P < 0.005, is a temporizing measure to contain the flood and death-by-significance. NHST and P values may be replaced in many fields by other, more fit-for-purpose, inferential methods. However, curtailing selection biases requires additional measures, beyond changes in inferential methods, and in particular reproducible research practices. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
61. What Have We (Not) Learnt from Millions of Scientific Papers with P Values?
- Author
-
Ioannidis, John P. A.
- Subjects
- *
P-value (Statistics) , *BAYESIAN analysis , *STATISTICAL significance , *STATISTICIANS - Abstract
P values linked to null hypothesis significance testing (NHST) is the most widely (mis)used method of statistical inference. Empirical data suggest that across the biomedical literature (1990-2015), when abstracts use P values 96% of them have P values of 0.05 or less. The same percentage (96%) applies for full-text articles. Among 100 articles in PubMed, 55 report P values, while only 4 present confidence intervals for all the reported effect sizes, none use Bayesian methods and none use false-discovery rate. Over 25 years (1990-2015), use of P values in abstracts has doubled for all PubMed, and tripled for meta-analyses, while for some types of designs such as randomized trials the majority of abstracts report P values. There is major selective reporting for P values. Abstracts tend to highlight most favorable P values and inferences use even further spin to reach exaggerated, unreliable conclusions. The availability of large-scale data on P values from many papers has allowed the development and applications of methods that try to detect and model selection biases, for example, p-hacking, that cause patterns of excess significance. Inferences need to be cautious as they depend on the assumptions made by these models and can be affected by the presence of other biases (e.g., confounding in observational studies). While much of the unreliability of past and present research is driven by small, underpowered studies, NHST with P values may be also particularly problematic in the era of overpowered big data. NHST and P values are optimal only in a minority of current research. Using a more stringent threshold, as in the recently proposed shift from P < 0.05 to P < 0.005, is a temporizing measure to contain the flood and death-by-significance. NHST and P values may be replaced in many fields by other, more fit-for-purpose, inferential methods. However, curtailing selection biases requires additional measures, beyond changes in inferential methods, and in particular reproducible research practices. [ABSTRACT FROM AUTHOR]
- Published
- 2019
- Full Text
- View/download PDF
62. Management of atrial fibrillation-flutter: uptodate guideline paper on the current evidence.
- Author
-
Shah, Syed Raza, Luu, Sue-Wei, Calestino, Matthew, David, John, and Christopher, Bray
- Subjects
- *
CATHETER ablation , *ATRIAL fibrillation , *DISEASE management - Abstract
The term ‘flutter’ and ‘fibrillation’ were first coined to differentiate the differences between fast, regular contractions in Atrial Flutter (AFLUT) with irregular, vermiform contractions of Atrial Fibrillation (AFIB). Management of these two diseases has been a challenge for physicians. Rate control (along with rhythm control) is the first line of management for symptomatic AFIB/AFLUT with Rapid Ventricular Rate (RVR). In some situations, atrial rhythms may not be well controlled by these anti-arrhythmic drugs, making cardioversion to sinus rhythm necessary. Anti-coagulation therapy in both the disease population is essential. Catheter ablation is an effective treatment option in certain patients that have AFIB/AFLUT refractory to medical management. Newer techniques like left atrial appendage (LAA) has been developed and is a highly attractive concept for the future in the management of AFIB/AFLUT. Newer novel drugs targeting specific ion channels are approaching the stages of clinical investigation. However, while advances in technologies have helped elucidate many aspects of these diseases, many mysteries still remain. This literature review serves as one of the guideline papers for current up-to-date management on both AFIB and AFLUT. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
63. Digital Data and Knowledge Making in the Field.
- Author
-
Butt, Bilal
- Subjects
- *
WILDLIFE monitoring , *ELECTRONIC paper , *STORYTELLING , *ACQUISITION of data - Abstract
Using digital data collection devices in the field is now commonplace among many faculty and students. However, there is less attention to how the use of GPS units, tablets and devices transforms or alters our understanding of the field itself. Does the embrace of the digital simply replace paper, or does it fundamentally transform our ways of knowing? What do we gain and what do we lose as we move from paper to digital in the acts of doing fieldwork? What are the limits of technology in the field and after the field? In this paper, I wrestle with these questions through my own fieldwork experiences through two story-telling narratives. In the first, I discuss the process of documenting pastoralists' cattle movement through GPS units, while in the second I relay the process of using tourists as volunteer citizen scientists for wildlife monitoring efforts. Through these examples, I demonstrate a number of key lessons for fieldwork with digital devices and call for a more thorough understanding of the dialectics between devices and users. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF
64. NOMADLAND: Surviving America in the Twenty-First Century: By Jessica Bruder. New York: W.W. Norton, 2017; 273 pp.; ills., bibliog., index. $13.95 (paper), isbn 9780393356311.
- Subjects
- *
TWENTY-first century , *SOCIAL scientists , *SEASONAL employment , *COMMUNITIES , *JOB hunting , *HUNTER-gatherer societies - Abstract
Some nomads have their own websites and are on Facebook, which might be worth exploring. There is no typology of these nomads; some have regularity, some on highly ad hoc (just hitting the road) ventures, and some using websites, Facebook, and Internet gatherings to construct a community. Bruder mentions the I RV Daily Report i , the Rubber Tramp Rendezvous, roving GTG (get togethers), FreeCampsites.net, Kampgrounds of America, Amazon's CamperForce, and Craigslist (for job opportunities). [Extracted from the article]
- Published
- 2023
- Full Text
- View/download PDF
65. Difference in Learning Among Students Doing Pen-and-Paper Homework Compared to Web-Based Homework in an Introductory Statistics Course.
- Author
-
Jonsdottir, Anna Helga, Bjornsdottir, Audbjorg, and Stefansson, Gunnar
- Subjects
- *
HOMEWORK , *LEARNING , *STUDENT assignments , *MATHEMATICS education , *EDUCATION - Abstract
A repeated crossover experiment comparing learning among students handing in pen-and-paper homework (PPH) with students handing in web-based homework (WBH) has been conducted. The system used in the experiments, the tutor-web, has been used to deliver homework problems to thousands of students in mathematics and statistics over several years. Since 2011, experimental changes have been made regarding how the system allocates items to students, how grading is done, and the type of feedback provided. The experiment described here was conducted annually from 2011 to 2014. Approximately, 100 students in an introductory statistics course participated each year. The main goals were to determine whether the above-mentioned changes had an impact on learning as measured by test scores in addition to comparing learning among students doing PPH with students handing in WBH. The difference in learning between students doing WBH compared to PPH, measured by test scores, increased significantly from 2011 to 2014 with an effect size of 0.634. This is a strong indication that the changes made in the tutor web have a positive impact on learning. Using the data from 2014, a significant difference in learning between WBH and PPH for 2014 was detected with an effect size of 0.416 supporting the use of WBH as a learning tool. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
66. Fiber morphology, chemical composition, and properties of kraft pulping handsheet made from four Thailand bamboo species.
- Author
-
Somwang Khantayanuwong, Piyawan Yimlamai, Korawit Chitbanyong, Kapphapaphim Wanitpinyo, Sawitree Pisutpiched, Sarawood Sungkaew, Prakit Sukyai, and Buapan Puangsin
- Subjects
- *
SULFATE pulping process , *BAMBOO , *FIBERS , *PAPER pulp , *SPECIES , *PAPERMAKING - Abstract
The microstructural, morphological, chemical, pulp, and paper properties of four fast growing Thai bamboo species, Bambusa vulgaris, Bambusa longispiculata, Dendrocalamus membranaceus, and ×Thyrsocalamus liang, were characterized to evaluate their potential as alternative fibrous raw materials in pulping and papermaking. It was found that the chemical composition of the four bamboo species was not significantly different. The alpha cellulose, lignin, and ash contents were between 46% and 50%, 27% and 29%, and 2% and 3%, respectively. The average fiber length ranged between 1.74 and 2.16 mm and had long fibers similar to softwood fibers. The bamboo fibers were thick-walled, narrow, had a small lumen, and were rigid. The pulp yield of all the bamboo species, prepared by kraft pulping, was high between 45% and 50% and had a low rejection of 0.12–0.33%. The handsheets were prepared from the bamboo pulp using various beating time to develop strength properties. It was observed that the handsheet quality improved with increasing beating time. We conclude that these properties indicate a great potential for these bamboo species for pulp and paper production. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
67. Immunochromatographic paper sensor for ultrasensitive colorimetric detection of cadmium.
- Author
-
Song, Shanshan, Zou, Shuzhen, Zhu, Jianping, Liu, Liqiang, and Kuang, Hua
- Subjects
- *
COLORIMETRY , *CADMIUM , *CHROMATOGRAPHIC analysis , *MONOCLONAL antibody probes , *ETHYLENEDIAMINETETRAACETIC acid - Abstract
A novel and highly sensitive immunochromatographic strip based on a monoclonal antibody (3A9) was developed for the detection of cadmium in tap water. The 50% inhibition concentration of the antibody, which showed no cross-reactivity with other heavy metal ions, was 0.45 ng/mL and it recognized Cd(II)-1-(4-isothiocyanobenzyl) ethylenediamine-N,N,N′,N′-tetraacetic acid (EDTA) (Cd(II)-ITCBE) and not metal-free ITCBE and EDTA. The cutoff value for semi-quantitative detection of the strip was 5 ng/mL and the lower limit of detection for quantitative detection was 0.2 ng/mL using a scanning reader. The percent recovery ranged from 107.6% to 132% in tap water samples. [ABSTRACT FROM AUTHOR]
- Published
- 2018
- Full Text
- View/download PDF
68. Development and applications of transparent conductive nanocellulose paper.
- Author
-
Li, Shaohui and Lee, Pooi See
- Subjects
- *
SILICON solar cells , *ELECTRONIC equipment , *TACTILE sensors , *ELECTROCHROMIC devices , *SOLAR cells , *THERMAL stability , *RESTROOMS - Abstract
Increasing attention has been paid to the next generation of 'green' electronic devices based on renewable nanocellulose, owing to its low roughness, good thermal stability and excellent optical properties. Various proof-of-concept transparent nanopaper-based electronic devices have been fabricated; these devices exhibit excellent flexibility, bendability and even foldability. In this review, we summarize the recent progress of transparent nanopaper that uses different types of nanocellulose, including pure nanocellulose paper and composite nanocellulose paper. The latest development of transparent and flexible nanopaper electronic devices are illustrated, such as electrochromic devices, touch sensors, solar cells and transistors. Finally, we discuss the advantages of transparent nanopaper compared to conventional flexible plastic substrate and the existing challenges to be tackled in order to realize this promising potential. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
69. Use of paper mill waste for brick making.
- Author
-
Sarkar, Raju, Kurar, Ritesh, Gupta, Ashok Kumar, Mudgal, Ankur, and Gupta, Varun
- Abstract
The intent of the present research work is to explore the prospect of replacing natural soil used in brick making by some extent with industrial waste, that is, lime mud, as obtained from paper mill waste. Extensive adoption of this mill waste as a brick making material will deter the environmental effects of this waste disposal. Moreover, its adoption will not only solve the problem of stocked waste piles but also scale down the usage of natural soil as a brick making material. In consideration of the central intend of this study to utilize industrial waste as an alternate raw material, yet another industrial waste—fly ash, has also been blended to the mix to manufacture unburnt bricks, such that, it may produce cementitious compounds with lime mud. So, the materials used for brick making in this study are: lime mud, collected from the dumping site of M/s Hindustan Paper Corporation Limited, Jagiroad, Assam, India; soil, collected from a brick manufacturing unit also near Jagiroad; and fly ash, collected from National Thermal Power Station, Badarpur, Delhi, India. The materials have been characterized with respect to their chemical and geotechnical properties. Then, experiments have been conducted on hand-moulded bricks of aforementioned mix in distinct proportions. In this study, all the bricks have been dried in the natural condition and then tested for compressive strength conforming to International standards. It has been duly noted that none of the treated unburnt bricks satisfies the requirements of standard codes. Nonetheless, in case of burnt bricks, the compressive strength satisfies the requirements of International standard codes wherein lime mud has been added up to a certain percentage (=20%) in soil-lime mud mix. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
70. Discussion of the Paper "Prediction, Estimation, and Attribution" by B. Efron.
- Author
-
Candès, Emmanuel and Sabatti, Chiara
- Subjects
- *
FORECASTING , *ATTRIBUTION (Social psychology) , *HIDDEN Markov models , *INFORMATION storage & retrieval systems , *ALGORITHMIC randomness - Abstract
We enjoyed reading Professor Efron's (Brad) paper just as much as we enjoyed listening to his June 2019 lecture in Leiden. Interestingly, Efron puts the pure predictive algorithms to the test in a scenario where the sample size is extremely moderate by today's standards ( I n i = 102). In the knockoff framework, one can use I any i black-box (any predictive model) to identify any kind possible association - linear or not - between a large set of explanatory variables Graph HT ht and an outcome I Y i . This framework rigorously tests whether the conditional distribution Graph HT ht actually depends on any of the variables I X SB j sb i without assuming any model for how I X i and I Y i are connected (Candès et al. [4]). [Extracted from the article]
- Published
- 2020
- Full Text
- View/download PDF
71. Papers published by the journal Temperature are cited more often than those published by more prestigious journals.
- Author
-
Romanovsky, Andrej A.
- Subjects
- *
PERIODICAL publishing , *BODY temperature , *TRP channels - Published
- 2022
- Full Text
- View/download PDF
72. Analysis of material and craft aesthetics characteristics of arts and crafts works based on computer vision.
- Author
-
Yu, Ling and Chung, Wonjun
- Subjects
- *
AESTHETICS of art , *HANDICRAFT equipment , *MATERIALS analysis , *COMPUTER vision , *ART materials , *DISTRIBUTED computing - Abstract
As a typical application of machine learning in the mobile field of security and privacy protection, the main characteristics of arts and crafts materials are to advocate the practicality and functionality of design, emphasizing the unity of practicality and aesthetics, and practicality is the first. The so-called practicality refers to whether the designed product meets the specific functional requirements or aesthetic requirements, and whether it is convenient, comfortable and safe to use. Based on computer vision, this paper studies the material and aesthetic characteristics of arts and crafts works, and the research shows that this method has achieved the best performance. More specifically, the maximum expected value of this method is 0.69, which is much higher than the corresponding values of 0.54 and 0.50 in references [1] and [2] respectively. The experimental results show that our method is specially designed for the distributed learning of process aesthetics, and it is still a very effective tool for the aesthetic classification task of process aesthetic feature images. Based on computer vision, this paper studies the creative style and aesthetic characteristics of arts and crafts materials, and makes a comprehensive investigation and beneficial exploration on their development, aesthetic characteristics and creative style. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
73. A brief history of information and disinformation in hydrological data and the impact on the evaluation of hydrological models.
- Author
-
Beven, Keith
- Subjects
- *
HYDROLOGIC models , *DISINFORMATION , *EPISTEMIC uncertainty , *SNOWMELT , *DIGITAL twins , *WATERSHEDS - Abstract
This paper considers what we know about the potential for disinformation in hydrological data when used for the evaluation of hydrological models. This will generally arise from epistemic uncertainties associated with hydrological observations, particularly from nonstationary or extrapolated rating curves for discharges, and poor rainfall and snowmelt information when interpolated over basin areas. Approaches based on information theory are not well suited to consideration of such epistemic uncertainties in model evaluation and an alternative approach based on setting limits of acceptability independent of any model runs is suggested. This allows for both the rejection of all models tried, and for acceptability of models across different model structures and parameter sets. The paper concludes with some suggestions for future research on defining disinformative data for both point and spatial observables, studying model failures, and defining new observations with a view to having the greatest impact on reducing model uncertainties. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
74. Identifying performance indicators to measure overall performance of telephone triage – a scoping review.
- Author
-
Vainio, Hanna, Soininen, Leena, Castrén, Maaret, and Torkki, Paulus
- Subjects
- *
MEDICAL quality control , *CINAHL database , *ONLINE information services , *PATIENT aftercare , *MEDICAL triage , *KEY performance indicators (Management) , *HEALTH services accessibility , *SYSTEMATIC reviews , *PATIENT satisfaction , *HOSPITAL costs , *COST control , *CONCEPTUAL structures , *SEVERITY of illness index , *MEDICAL care use , *CLINICAL medicine , *QUALITY assurance , *LITERATURE reviews , *MEDLINE , *PATIENT compliance , *EMERGENCY nursing , *TELENURSING - Abstract
This article aims to summarize performance indicators used in telephone triage services research, and make recommendations for the selection of valid indicators to measure the performance of telephone triage. We describe what kind of frameworks, performance indicators, or variables have been used for evaluating telephone triage performance by systematically mapping the telephone triage performance measurement. The objective was to find measures for each Triple Aim dimension. A scoping review method was used following Joanna Briggs Institute guidelines. Using this method, we defined indicators to measure the performance of telephone triage. We used the Triple Aim framework to identify indicators to measure the overall performance of telephone triage. The Triple Aim framework consists of improving the patient experience of care, improving the health of populations, and reducing cost per capita. The scoping review was performed using CINAHL, Medline, EBSCOhost, and PubMed electronic databases. The eligibility criterion was research published in English between 2015 and 2023. The inclusion focused on the use and performance of telephone triage services and system-focused studies. A total of 1098 papers were screened for inclusion, with 57 papers included in our review. We identified 13 performance indicators covering all Triple Aim dimensions: waiting times, access, patient satisfaction, the accuracy of triage decision, severity and urgency of the symptoms, triage response, patient compliance with the advice given, follow-up healthcare service use, and running costs of service. We didn't find any earlier framework covering all Triple Aim dimensions properly. Measuring the performance of telephone triage requires an extensive and comprehensive approach. We presented performance indicators that may be included in the framework for measuring the performance of telephone triage to support overall performance measurements of telephone triage. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
75. India's use of military power and the sovereignty principle: insights from the neighborhood.
- Author
-
Roy, Nabarun
- Subjects
- *
MINDFULNESS , *SOVEREIGNTY , *NEIGHBORHOODS , *INTERNATIONAL relations , *LIGHT elements , *WAR , *NATIONAL interest - Abstract
Notwithstanding India's public stand professing its respect of the sovereignty principle, the imperatives of competitive international relations have necessitated the use of force against its neighbors, thereby undermining their sovereignty. This use of force has been manifested through conventional wars as well as through the sub-conventional use of force such as surgical strikes. This paper examines how India has sought to toe a fine line between pursuing its national interest through the application of military power while being mindful of the broader normative frameworks influencing state behavior since 1947. In doing so, it engages with the interplay of the material and the ideational. Given the time span of the study, it also seeks to shine light on the elements of continuity and change that mark its application of military power through the prism of the sovereignty principle. Furthermore, the paper also pays attention to the recent surgical strikes, features that mark them as being different from previous such actions performed by India, and what this means for India's understanding of the sovereignty principle. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
76. STUDENTWASHING: A NEW TERRITORIAL STRATEGY IN ISRAEL/PALESTINE.
- Author
-
Schwake, Gabriel and Allegra, Marco
- Subjects
- *
POLITICAL parties , *ZIONISM , *QUALITY of life , *GEOPOLITICS , *SUFFIXES & prefixes (Grammar) - Abstract
The suffix "washing" refers to the practice of portraying controversial actions in a positive light by leveraging progressive principles, often used by economic corporations, organizations, political parties, or governments. This paper introduces and develops the term "studentwashing" to define the deliberate effort to present Israeli territorial development as an attractive, youthful, and unique experience. This portrayal aims to engage larger segments of society in the national geopolitical project while normalizing its settler-colonial aspects as a means to ensure its continuation. While the constant development of new territorial settlements is dependent either on the right-wing religious sector or on the "quality-of-life" settlers, studentwashing is reserved for areas that are not ideological enough for the first nor sufficiently attractive to the latter. Analyzing "student villages" in the Negev, this paper depicts a new territorial strategy meant to enhance the state's spatial control over the predominantly Arab periphery inside official Israeli borders. Accordingly, this paper offers a new perspective on Israel's territorial strategies and enhances the general study of geopolitical and geo-economic spatial development. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
77. THE BETWEENNESS OF CONTEXTS: MILITARY COUPS, INTERNATIONALIZATION, AND THE STRUGGLE FOR INNOVATION IN TURKISH GEOGRAPHY.
- Author
-
Bekaroğlu, Erdem and Arı, Yılmaz
- Subjects
- *
COUPS d'etat , *SOCIOHISTORICAL analysis , *GLOBALIZATION , *GEOGRAPHY , *HISTORICAL analysis , *POLITICAL development - Abstract
This paper provides an analysis of the historical trajectory of Turkish geographical practice over the past four decades, situated within the broader socio-political landscape of the country. The transmission of the modern geographical tradition from continental Europe to Turkey during the interwar period established the discipline as a holistic science of the human-environment relationship. Although this understanding started to change after the 1968 events, the 1980 Turkish military coup abruptly disrupted innovative endeavors in the discipline, prompting a resurgence of regionally focused synthesis within geography. This insular approach prevailed for several decades but began to evolve in response to the internationalization trends that emerged in the 2000s, with deliberate steps taken toward fostering innovation. Despite institutional damage resulting from the political developments following the 2016 military coup attempt, the discipline maintained its commitment to innovation. This paper critically examines the divergent responses of Turkish geography and its practitioners to the 1980 military coup and the 2016 coup attempt, highlighting the significant influence of globalization. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
78. Microcosmic mechanism of asphalt-aggregate interface adhesion failure under freeze-thaw cycles based on molecular dynamics.
- Author
-
An, Yulong, Zhang, Haitao, Gao, Meiyi, and Zhao, Song
- Abstract
\nHighlightsIn order to investigate the micro-mechanisms of adhesive failure at the asphalt-aggregate interface under freeze-thaw cycling, this study presents a novel model for freeze-thaw cycling of asphalt mixtures constructed using molecular dynamics. The model is employed to explore the micro-mechanisms of adhesive failure between asphalt and aggregate surfaces under freeze-thaw cycling conditions. Utilising the four-component model of asphalt, asphalt molecules were constructed, with silicon dioxide and calcium carbonate chosen to represent acidic and alkaline aggregates, respectively. Subsequently, an asphalt-aggregate-water freeze-thaw cycling model was developed. Building upon this foundation, the variations in interface interactions between asphalt and the two types of minerals were analysed under the same freeze-thaw cycling conditions but differing freeze-thaw cycle counts. This analysis was conducted through the examination of Radial Distribution Function (RDF), water molecule coordination numbers, and hydrogen bond quantities at the interfaces between asphalt and the two mineral types. The research findings indicate that acidic aggregates exhibit a greater affinity for water molecules compared to alkaline aggregates. Hydrogen bond interactions exist between aggregates and water molecules, with the hydrogen bond energy being greater than the interactions between asphalt molecules and aggregate surfaces. The cohesive energy decreases with an increasing number of freeze-thaw cycles, leading to a gradual reduction in asphalt viscosity and facilitating the detachment of asphalt from the aggregate surface. Consequently, acidic aggregates tend to absorb water molecules more readily, and water can lower the viscosity of asphalt molecules, ultimately resulting in the macroscopic delamination of asphalt from the aggregate surface. These research outcomes provide valuable theoretical guidance for a deeper exploration of the adhesive failure mechanisms in asphalt-aggregate interactions. This paper proposes a new calculation model for asphalt mixture adhesion failure.The hydrogen bonding between water molecules and aggregates is greater than that between asphalt and aggregates.Freezing and thawing cycles will reduce the cohesive energy density of asphalt and reduce the adhesion between asphalt and aggregate.This paper proposes a new calculation model for asphalt mixture adhesion failure.The hydrogen bonding between water molecules and aggregates is greater than that between asphalt and aggregates.Freezing and thawing cycles will reduce the cohesive energy density of asphalt and reduce the adhesion between asphalt and aggregate. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
79. Microcosmic mechanism of PE modified asphalt based on molecular simulation.
- Author
-
Li, Erda, Xu, Wenyuan, and Zhang, Yang
- Abstract
This paper proposes adding waste plastics to asphalt. Using molecular dynamics to study the properties of modified asphalt after adding polyethylene (PE), and clarify its application direction according to its microscopic characteristics, in order to achieve the goals of resource recycling, environmental protection, improvement of asphalt performance and cost reduction. First, construct the molecular model of asphalt according to the four components of the asphalt molecule; construct the molecular model of PE according to the molecular formula of polyethylene; Secondly, by calculating the solubility parameters and interaction energy of asphalt and PE, the compatibility is judged. Finally, the results of the micromechanical simulations of the original and modified asphalt were compared with the test results of the rheological properties of the asphalt. The research results show that the compatibility between PE and asphalt is the best at 175°C, indicating that this temperature is the best modification temperature of asphalt; the addition of PE increases the order of asphalt molecules, and increases the mechanical modulus of asphalt and high temperature rheological properties. The combination of micro simulation and macro test makes the content of this paper more complete and provides theoretical value for the application of waste PE modified asphalt pavement. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
80. The pathways and the mechanisms by which <italic>Cryptococcus</italic> enters the brain.
- Author
-
Zhou, Yangyu, Huang, Yemei, Yang, Chen, Zang, Xuelei, Deng, Hengyu, Liu, Jing, Zhao, Enqi, Tian, Tingyue, Pan, Lei, and Xue, Xinying
- Abstract
Generally,
Cryptococcus initially infects the respiratory tract, but can spread, eventually crossing the blood-brain barrier (BBB) and causing meningitis or meningoencephalitis. Specifically,Cryptococcus invades the vascular endothelial cells of the BBB, from which it enters the brain. The main mechanisms through whichCryptococcus crosses the BBB are transcellular traversal, the paracellular pathway, and via Trojan horse. In this paper, the mechanisms by whichCryptococcus crosses the BBB were explained in detail. In addition to pathways of entry to the brain, this paper presents a discussion on some rare cryptococcal infections and provides some insights for future research directions. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
81. A study on thermal displacement of CNC horizontal lathe based on movable component temperatures.
- Author
-
than, Van-the, Ngo, Thi-Thao, Su, Ding-Yuan, and Wang, Chi-Chang
- Subjects
- *
LATHES , *NUMERICAL control of machine tools , *TEMPERATURE , *CELLULOSE nanocrystals , *PHOTOTHERMAL effect , *REGRESSION analysis - Abstract
This paper presents a thermal error model for a lathe CNC machine using temperature on moving parts, which is usually a difficult measurement. Different working conditions are performed to obtain temperature and thermal displacement of the machine. A multi-linear regression model is applied for modelling relationship between temperatures and thermal errors. Data of two constant working conditions are implemented to find out the fitting function. Through analysis, it shows that thermal errors for X- and Z-axes can be estimated based on only four temperature points (T2, T3, T10 and T12 for the X-axis and T4, T6, T7 and T11 for the Z-axis). Results reveal that using movable part temperature data (T12), the average and maximum error in the predicted thermal displacement of the X-axis can be reduced about 1/3 and 2/5 compared to without using T12, while the movable temperature point on Z-Screw (T8) has a tiny effect on the average and maximum error of predicted thermal displacement of the Z-axis. Results herein can provide useful information to develop a thermal compensation for the CNC lathe machine. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
82. Gold nanoparticle-based paper sensor for multiple detection of 12 Listeria spp. by P60-mediated monoclonal antibody.
- Author
-
Wang, Wenbin, Liu, Liqiang, Song, Shanshan, Xu, Liguang, Zhu, Jianping, and Kuang, Hua
- Subjects
- *
GOLD nanoparticles , *LISTERIA , *MONOCLONAL antibodies , *FOOD chains , *POLYMERASE chain reaction - Abstract
The genus ofListeriaconsists of heterologous species and its presence in the food chain is an indicator of poor hygiene. However, a portable and simple paper sensor for detection of listeria spp. with high accuracy was still unknown. In this study, we prepared a pair of monoclonal antibodies (mAbs) that specifically recognize the P60 protein on the cell surface ofListeriaspp. The selected pair was found to be sensitive to both the P60 protein and cell body of the genusListeria. On this basis, a rapid paper sensor was established for sensitiveListeriaspp. detection. The developed paper sensor broadly cross-reacted with the 12 tested strains ofListeriaand the sensitivity in PBS buffer was 103–104colony-forming units (CFU) judged by the gray values of the test line. No cross-reaction with any other gram-positive or gram-negative strains tested was observed. A study using milk samples showed that this paper sensor could detect samples contaminated with low levels of the testedListeriaspp. (1–9 CFU/mL) after 8 h of enrichment and further concentrate for approximately 10 times by centrifugation. The results were in accordance with those obtained using the polymerase chain reaction method. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
83. Response of the fish assemblage to a saltwater barrier and paper mill effluent in the Lower Neches River (Texas) during drought.
- Author
-
Pizano-Torres, Rebecca I., Roach, Katherine A., and Winemiller, Kirk O.
- Subjects
- *
STREAMFLOW , *DROUGHTS & the environment , *INDUSTRIAL waste & the environment , *SALINE waters ,ENVIRONMENTAL aspects - Abstract
In 2011, Texas experienced record heat and drought that escalated concerns about environmental flows for rivers. In response to these worries, fishes and water quality were sampled in the Lower Neches River, Texas, from May-August 2012 during continued drought. Potential effects of hydrology on environmental parameters and assemblages of small (seine samples) and large (gillnet samples) fishes were evaluated at multiple locations. Approximately 1 km downstream from the saltwater barrier, paper mill effluent discharges into the river. Salinity was higher and dissolved oxygen lower below the saltwater barrier during low-flow intervals. Fish species richness in seine samples, was higher when the barrier was open, and species richness for both gear types was lowest at sites closest to the paper mill effluent discharge. Overall, species richness was higher at sites below the barrier, with more estuarine and marine species present. When the barrier was closed, richness and abundance of sensitive freshwater species were lower below the barrier. Closure of the barrier during drought results in accumulation of dissolved organic compounds from paper mill effluent and lower dissolved oxygen in the reach below the barrier. To sustain biodiversity in the system, subsistence flows must pass across the saltwater barrier during droughts. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
84. Development and applications of transparent conductive nanocellulose paper.
- Author
-
Li, Shaohui and Lee, Pooi See
- Subjects
- *
NANOSTRUCTURED materials , *CELLULOSE - Abstract
Increasing attention has been paid to the next generation of ‘green’ electronic devices based on renewable nanocellulose, owing to its low roughness, good thermal stability and excellent optical properties. Various proof-of-concept transparent nanopaper-based electronic devices have been fabricated; these devices exhibit excellent flexibility, bendability and even foldability. In this review, we summarize the recent progress of transparent nanopaper that uses different types of nanocellulose, including pure nanocellulose paper and composite nanocellulose paper. The latest development of transparent and flexible nanopaper electronic devices are illustrated, such as electrochromic devices, touch sensors, solar cells and transistors. Finally, we discuss the advantages of transparent nanopaper compared to conventional flexible plastic substrate and the existing challenges to be tackled in order to realize this promising potential. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
85. A pilot study on particle emission from printer paper shredders.
- Author
-
Tsai, Candace Su-Jung, Shin, Nara, Castano, Andrew, Khattak, Jared, Wilkerson, Andrea M., and Lamport, Natalie R.
- Subjects
- *
PARTICLE emissions , *DOCUMENT shredders , *PARTICLE size distribution , *CALCIUM , *PARTICULATE matter - Abstract
This project investigated airborne particle releases derived from paper shredding. The characteristics of these emissions have not been studied previously. The objective of this project was to characterize released particles in terms of particle size distribution, particle mass and number concentration, particle morphology and chemical composition, as well as the structure of paper fibers. A significant amount of paper particles were found in the close vicinity of an unenclosed paper shredder during shredding and the manual manipulation of shredded paper. The particle release from shredding using two types of printer paper, two types of shredders, and various shredding frequencies was measured inside the shredder basket. The particles released from paper shredding were found to be in the nanometer to micrometer size ranges, and the particles contained calcium and other metal elements. Manual stirring of shredded paper released the highest particle concentration as measured at the opening of the container. Shredding with 30-s intervals increased the duration of airborne particle release as compared to intermittent shredding. Multiple quantitative analyses were employed to evaluate released particles at various particle size ranges. Two real-time instruments which measured thoracic (<10 μm) and respirable (<4 μm) particle sizes showed comparable concentrations measured inside and outside of the shredder basket. Copyright © 2017 American Association for Aerosol Research [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
86. φ-contractive multivalued mappings in complex valued metric spaces and remarks on some recent papers.
- Author
-
Joshi, Vishal, Singh, Naval, Singh, Deepak, and Sahoo, Prasanna K.
- Subjects
- *
FIXED point theory , *SET-valued maps , *MATHEMATICAL mappings , *METRIC spaces , *GENERALIZED spaces - Abstract
The purpose of this paper is twofold. Firstly, certain common fixed point theorems are established via φ-contractive multivalued mappings involving point-dependent control functions as coefficients in the framework of complex valued metric spaces. Our results improve and extend several results in the existing literature. Moreover, this section is equipped by some illustrative examples in support of our results. Secondly, we point out some slip-ups in the examples of some recent papers based on multivalued contractive mappings in complex valued metric spaces. Our observations are also authenticated with the aid of some appropriate examples. Some rectifications to correct the erratic examples are also suggested. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
87. Screen and Paper Reading Research – A Literature Review.
- Author
-
Walsh, Gemma
- Subjects
- *
LITERATURE reviews , *ACADEMIC libraries , *ACADEMIC librarians , *ELECTRONIC records , *LIBRARIES & students - Abstract
Due to the proliferation of information available online and through academic libraries, students are increasingly reading from the screen. Academic documents can be long and complex, requiring sustained concentration to read deeply. This paper reviews current literature on the advantages and disadvantages of electronic and paper media for academic reading. Theoretical and empirical research into screen reading in academic institutions falls broadly into the following categories; reading and comprehension theory, the effect of a document’s platform, design and tools on reading, and screen versus paper research studies. These categories inform and provide the structure for this review. This paper concludes by considering how academic librarians can manage their collections and deliver library services in response to recent screen reading research. This overview of the literature on reading theory, the platforms and tools integral to reading electronic documents, and screen versus paper reading research, will enable academic librarians to make more informed collection management and library service decisions. [ABSTRACT FROM PUBLISHER]
- Published
- 2016
- Full Text
- View/download PDF
88. Urothelium removal does not impact mucosal activity in response to muscarinic or adrenergic receptor stimulation.
- Author
-
Moro, Christian and Phelps, Charlotte
- Subjects
- *
UROTHELIUM , *ADRENERGIC receptors , *MUSCARINIC receptors , *BLADDER , *SMOOTH muscle , *PAPER towels , *MUCOUS membranes - Abstract
The inner lining of the urinary bladder (urothelium and lamina propria, or bladder mucosa) has an important role as a tissue barrier between stored urine and the underlying smooth muscle, as well as in the modulation and regulation of bladder contractility. However, the individual influence of the apical urothelial layer on the contractile activity of this tissue is uncertain. The aim of this experiment was to identify the contractile activity of the lamina propria after removal of the urothelium. Several methods were used to mechanically disrupt the urothelium, including dabbing the tissue with a paper towel, longitudinal swipes with a cotton bud, or a longitudinal scrape with the edge of a scalpel. Hematoxylin-eosin staining was utilized to determine the level of removal of the apical urothelial cells. Spontaneous contractile activity was measured in organ baths, and responses to the agonists carbachol and isoprenaline were obtained. Three longitudinal swipes with a cotton bud was found to be the optimal method to remove the majority of the urothelium without damaging the lamina propria. Upon removal of the urothelium, the spontaneous activity of the tissue was unaltered. Similarly, responses to carbachol (1 µM) and isoprenaline (1 µM) were not affected after removal of the urothelium. The urothelium can be effectively removed without damaging the lamina propria. This apical tissue layer is not responsible for mediating the increases to spontaneous phasic activity or tonic contractions of the bladder mucosa (urothelium with lamina propria) when muscarinic or adrenergic receptors are stimulated. This research presents the lamina propria as the important cell layer mediating the overall contractile activity of the bladder wall. [ABSTRACT FROM AUTHOR]
- Published
- 2023
- Full Text
- View/download PDF
89. Scientific papers and artificial intelligence. Brave new world?
- Author
-
Nexøe, Jørgen
- Subjects
- *
COMPUTERS , *MANUSCRIPTS , *ARTIFICIAL intelligence , *MACHINE learning , *DATA analysis , *MEDICAL literature , *MEDICAL research , *ALGORITHMS - Published
- 2023
- Full Text
- View/download PDF
90. Statistical significance and scientific misconduct: improving the style of the published research paper.
- Author
-
Ziliak, Stephen T.
- Subjects
- *
PUBLICATIONS , *RESEARCH ethics , *AMNESIACS - Abstract
A science, business, or law that is basing its validity on the level ofp-values,tstatistics and other tests of statistical significance is looking less and less relevant and more and more unethical. Today’s economist uses a lot of wit putting a clever index of opportunity cost into his models; but then, like the amnesiac, he fails to see opportunity cost in statistical estimates he makes of those same models. Medicine, psychology, pharmacology and other fields are similarly damaged by this fundamental error of science, keeping bad treatments on the market and good ones out. A few small changes to the style of the published research paper using statistical methods can bring large beneficial effects to more than academic research papers. It is suggested that misuse of statistical significance be added to the definition of scientific misconduct currently enforced by the NIH, NSF, Office of Research Integrity and others. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
91. Serving as a referee for your own paper: A dream come true or…?
- Author
-
Sayan, Serdar
- Subjects
- *
SPORTS officials , *PLAGIARISM , *SPORTS officiating , *EDUCATION ethics , *RESEARCH methodology - Abstract
This note first describes the details of an interesting incident of plagiarism where the author of a previously published paper was sent a verbatim copy of that paper for his review for possible publication in another journal. It then offers a few insights into the possible reasons underlying such blatant plagiarism attempts, and provides caveats against them. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
92. A stochastic framework for rainfall intensity–time scale–return period relationships. Part ΙΙ: point modelling and regionalization over Greece.
- Author
-
Iliopoulou, Theano, Koutsoyiannis, Demetris, Malamos, Nikolaos, Koukouvinos, Antonis, Dimitriadis, Panayiotis, Mamassis, Nikos, Tepetidis, Nikos, and Markantonis, David
- Subjects
- *
MULTISCALE modeling , *RAINFALL , *INTERPOLATION - Abstract
In this work, we formulate a regionalization framework for rainfall intensity–time scale–return period relationships which is applied over the Greek territory. The methodology for single-site estimation is based on a stochastic framework for multi-scale modelling of rainfall intensity which is outlined in the companion paper. Five parameters are first fitted independently for each site and the resulting parameter variability is assessed. Following a systematic investigation of uncertainty and variability patterns, two parameters, i.e. the tail-index and a time scale parameter, are identified as constant in space and estimated using data pooling techniques. The other three parameters are regionalized over Greece by means of spatial interpolation and smoothing techniques that are assessed through cross-validation in a multi-model framework. The regionalization scheme is implemented in a sequential order that allows exploiting rainfall information both from rainfall stations with sub-daily resolution and from the more reliable network of daily raingauges. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
93. A stochastic framework for rainfall intensity–time scale–return period relationships. Part I: theory and estimation strategies.
- Author
-
Koutsoyiannis, Demetris, Iliopoulou, Theano, Koukouvinos, Antonis, and Malamos, Nikolaos
- Subjects
- *
ESTIMATION theory , *PARAMETER estimation , *ESTIMATION bias , *STOCHASTIC models , *RAINFALL - Abstract
This work presents a stochastic framework for the construction of rainfall intensity–time scale–return period relationships, which was applied in the recent regionalization of design rainfall curves over the Greek territory, described in a companion paper. The methodology outlined herein builds upon a widely-used mathematical framework, which has been recently revisited and upgraded, and incorporates two different versions: (a) a theoretically consistent stochastic model applicable for rainfall intensity over any scale of interest; and (b) a simplified version valid over small scales, which makes parameter estimation easier. Special attention is given to the presentation of the simplified version, which suffices for most engineering tasks. Parameter estimation approaches are presented in detail, including the K-moments framework that allows for reliable high-order moment estimation and handling of bias due to spatiotemporal dependence. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
94. Numerical study on moving downburst with inclusion of the environmental wind.
- Author
-
Wu, Zhonghui
- Subjects
- *
WIND speed , *WIND pressure , *MICROBURSTS , *TURBULENT flow , *TURBULENCE , *THUNDERSTORMS - Abstract
Thunderstorm downbursts can impose critical wind loads on long-span transmission line structural system. Existing research has predominantly focused on stationary downbursts, with limited attention given to the analysis of travelling downbursts influenced by environmental wind and parent cloud motion. This paper utilizes the impinging jet method to simulate a travelling downburst at a small Reynolds number, employing the Delayed Detached Eddy Simulation turbulence model for solving the wall-bounded turbulent flow. The radial wind speed distribution of the travelling downburst is subsequently validated against previous experimental, numerical, and observational data. A comparative study is then conducted to discern the differences in the radial wind speed distribution between stationary and travelling downbursts. Finally, a parametric study investigates the influence of jet inlet speed, environmental wind and parent cloud motion on the maximum radial wind speed distribution of the travelling downburst. The findings reveal a significant disparity in the radial wind speed distribution between stationary and travelling downbursts. Notably, parent cloud motion, environmental wind, or their combined effects can alter the height providing the maximum radial wind speed. This variation has implications for the wind load distribution of travelling downburst across the conductor span of the transmission line structural system. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
95. A hybrid beam system of aramid-fibre-reinforced concrete and high-strength concrete.
- Author
-
Untimanon, Suphawit, Tanapornraweekit, Ganchai, and Tangtermsirikul, Somnuk
- Subjects
- *
CONCRETE beams , *CONCRETE , *REINFORCED concrete , *FAILURE mode & effects analysis , *COMPRESSIVE strength , *DUCTILITY - Abstract
This paper investigates the flexural behaviour of hybrid reinforced concrete (RC) beams having aramid fibre reinforced concrete (AFRC) in the tension zone and high-strength concrete (HSC) in the compression zone. In two series of experimental investigations, the depth of AFRC layer and the concrete strength in the compression zone were varied. The hybrid beams were tested in series 1 to explore the effects of the depth of AFRC layer on load-carrying capacity and flexural toughness. The effects of compressive strength of the concrete in the top half of the hybrid beams on load-deflection behaviour, failure mode and cracking pattern were studied in series 2. The experimental results reveal that the use of AFRC only in the bottom half of the beam enhanced load-carrying capacity and flexural toughness by 62.44% and 87.66%, respectively, compared to the control specimen with no AFRC. The hybrid beam with AFRC-HSC exhibited 5% higher load-carrying capacities, 45% higher ductility and better cracking behaviour than the conventional RC beam. These enhanced structural performances are beneficial for specific purposes such as structures in marine environment where rebar corrosion is the main concern, or structures under extreme loadings where high ductility is required. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
96. Comparison of conventional and split-cam strain wave gear through initial load and stress distribution.
- Author
-
Sahoo, Vineet
- Subjects
- *
HARMONIC drives , *FINITE element method , *ROGUE waves , *STRAINS & stresses (Mechanics) , *STRESS concentration - Abstract
This paper presents an analysis of stress developed in flex-gear (FG) cup with conventional strain wave generating (SWG) cam and split-cam SWG in strain wave gear/harmonic drive (HD), using initial load distribution by tooth pairs as a boundary condition in finite element method (FEM). The initial load distribution by tooth pairs is achieved with the assembly of ring gear (RG) and deformed FG before the application of any external load. A closed-form solution to the analytical method describes the exact initial load distribution by tooth pairs in the presence of secondary contacts. However, with spit-cam SWG the phenomenon of secondary contact is completely eradicated. Therefore, the load is distributed by contacting tooth pairs that lie only in the line of action and the tooth pair that lies along the major axis of split-cam SWG experiences maximum load compared to conventional SWG. The strain developed in FG cup based on the load distribution with both SWG cams obtained from FEM is verified with the experiment. The comparison shows a rise of 44 microns in circumferential strain around the major axis of deformed FG, when RG is assembled. This testifies the presence of initial load, which is distributed among all interfering tooth pairs before applying external load. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
97. An energy-saving anti-inclined lifting permanent magnet.
- Author
-
Ding, Ning, Liu, Chao, Cui, Shanfu, Duan, Jingsong, and Jiang, Shuna
- Subjects
- *
MAGNETIC flux density , *MAGNETISM , *MAGNETIC devices , *MAGNETIC circuits , *PERMANENT magnets , *POWER transmission , *MAGNETS - Abstract
The lifting permanent magnet is a new type of magnetic transport device consisting of a mechanical driving mechanism and a permanent magnet system. It can reduce power consumption as opposed to lifting electromagnet. However, the single-drive mechanism could not be used in the inclined condition, and how to calculate the balance working point of the magnetic circuit with several permanent magnet limits its application and development. In this paper, an anti-inclined mechanism with double drive mechanism was designed and implemented. The concentric shafts and the reversing gear were adopted to realise synchronous rotation. For the permanent magnet system, the iteration method for multi-magnets balance working point analysis is proposed and implemented. Based on the prototype experiment, the anti-inclined lifting permanent magnet hoisted a 1 ton weight workpiece successfully at an inclination angle of 30 degrees. And the measurement experiment proved that the iteration method is more precise than the conventional isolated method and is a better preparation for analysing the magnetic force and residual magnetic field strength. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
98. Meshfree dynamic analysis of functionally graded carbon nanotube reinforced polymer sandwich beams under harmonic moving loads.
- Author
-
Sayyidmousavi, Alireza, Foroutan, Mehrdad, and Fawaz, Zouheir
- Subjects
- *
SANDWICH construction (Materials) , *LIVE loads , *EULER-Bernoulli beam theory , *FUNCTIONALLY gradient materials , *STRUCTURAL optimization , *CARBON nanotubes , *COMPOSITE construction , *POLYMERS , *COMPOSITE materials - Abstract
A new generation of advanced composite materials has recently emerged through the use of Carbon Nanotubes (CNTs) as the reinforcing constituent in polymer matrix. In this paper, the dynamic response of polymer sandwich beams with functionally graded face sheets subject to two successive harmonic moving loads has been studied. Three different patterns of CNT's distributions for the face sheets have been investigated: Uniform Distribution (UD), Symmetrically Functionally Graded (SFG) distribution, and Unsymmetrically Functionally Graded (USFG) distribution. A thorough study on the effects of velocity, position, excitation frequency, and the phase angles of loads has been carried out using the Radial Point Interpolation Meshfree (RPIM) method based on the 2D theory of elasticity. The SFG is found to result in the highest stiffness of all three distribution patterns. Increasing the volume fraction of the reinforcement is seen to have resulted in an increase of around 33% in the flexural rigidity of the SFG beam. Also, decreasing the frequency is seen to have suppressed the deflection of the USFG type up to 90%. The current research presents a reliable computational framework to help provide an insight into the design of an optimum sandwich structure subject to a complicated state of loading. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
99. A Multi-Method Data Science Pipeline for Analyzing Police Service.
- Author
-
Haensch, Anna, Gordon, Daanika, Knudson, Karin, and Cheng, Justina
- Abstract
AbstractDespite the fact that most police departments in the U.S. serve jurisdictions with fewer than 10,000 residents, policing practices in small towns are understudied. This is due in part to data limitations and technological barriers that exist in the small-town context. In this paper we focus on one small town police department in New England with a history of misconduct, and develop a comprehensive data science pipeline that addresses the stages from design and collection to reporting. We present the reader with specific tools in the open-source Python ecosystem for replicating this pipeline. Once these data are processed, we perform two statistical analyses in an attempt to better understand the provisions of service by the small-town police department of focus. First, we perform ecological inference to estimate the rate at which residents are placing calls for service. Second, we model wait times using a negative binomal regression model to account for overdispersion in the data. We discuss data and model limitations arising through the pipeline creation and analysis process. [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
100. Contextual Dynamic Pricing with Strategic Buyers.
- Author
-
Liu, Pangpang, Yang, Zhuoran, Wang, Zhaoran, and Sun, Will Wei
- Abstract
AbstractPersonalized pricing, which involves tailoring prices based on individual characteristics, is commonly used by firms to implement a consumer-specific pricing policy. In this process, buyers can also strategically manipulate their feature data to obtain a lower price, incurring certain manipulation costs. Such strategic behavior can hinder firms from maximizing their profits. In this paper, we study the contextual dynamic pricing problem with strategic buyers. The seller does not observe the buyer’s true feature, but a manipulated feature according to buyers’ strategic behavior. In addition, the seller does not observe the buyers’ valuation of the product, but only a binary response indicating whether a sale happens or not. Recognizing these challenges, we propose a strategic dynamic pricing policy that incorporates the buyers’ strategic behavior into the online learning to maximize the seller’s cumulative revenue. We first prove that existing non-strategic pricing policies that neglect the buyers’ strategic behavior result in a linear Ω(T) regret with
T the total time horizon, indicating that these policies are not better than a random pricing policy. We then establish an O(T) regret upper bound of our proposed policy and an Ω(T) regret lower bound for any pricing policy within our problem setting. This underscores the rate optimality of our policy. Importantly, our policy is not a mere amalgamation of existing dynamic pricing policies and strategic behavior handling algorithms. Our policy can also accommodate the scenario when the marginal cost of manipulation is unknown in advance. To account for it, we simultaneously estimate the valuation parameter and the cost parameter in the online pricing policy, which is shown to also achieve an O(T) regret bound. Extensive experiments support our theoretical developments and demonstrate the superior performance of our policy compared to other pricing policies that are unaware of the strategic behaviors. [ABSTRACT FROM AUTHOR]- Published
- 2024
- Full Text
- View/download PDF
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.