Search

Solid polymer electrolyte blends with varied compositions of poly(ethylene oxide) (PEO)/carboxymethyl cellulose (Na-CMC) in 10/90, 50/50, and 90/10 compositions have been successfully prepared by means of the solution cast technique at room temperature. The modification of the structural, optical, and electrical properties of the prepared blend samples was studied by employing XRD, FTIR, UV-Vis, and electrical impedance spectroscopy methods. X-ray diffraction studies revealed that the crystalline nature gradually transforms into amorphous as the Na-CMC content increases in the sample. The variation of bands noticed in the Fourier transform infrared spectroscope characteristic spectrum of the blends reveals the formation of complexes between the individual polymers. The analysis of optical properties using a UV-Vis spectrometer in the wavelength range of 900–1100nm, shows a gradual decrease in the optical indirect energy band gap with an increase in Na-CMC content in the blend. The study of the electrical properties of the blend carried out in the frequency range 50 Hz–1MHz and temperature range 303K–338K, using an electrical impedance analyzer reveals that, the dielectric constant and loss decrease with the rise in frequency, exhibiting the usual behavior of the polymers. AC conductivity is found to increase with an increase in temperature. The highest value of ionic conductivity is found to be 6.06 × 10−3Scm−1 for the blend with a 10/90 composition. [ABSTRACT FROM AUTHOR]

Solid polymer electrolytes (SPEs) have been recognized as a preferable alternative to liquid electrolytes for energy storage application. However, low conductivity of SPEs has restricted their application. This issue can be overcome by adding controlled amount of dopant salt to the SPEs. In this work, various concentration of ammonium thiocyanate (NH4SCN) salt was incorporated into dextran using solution cast technique in order to study the effect of NH4SCN on electrical properties, crystallite size, morphology and ionic conductivity. Results from Fourier-transform infrared (FTIR) analysis confirm the coordination of cation of salt at the OH and C-O-C groups of dextran. Deconvolution of the FTIR band between 2015 and 2090 cm−1 was performed to investigate the ion association and dissociation phenomena. It is confirmed that the ion mobility and diffusion are directly proportional to the ionic conductivity. Based on the electrochemical impedance spectroscopy (EIS) result, an optimum ionic conductivity of (3.18 ± 1.19) × 10−4 S cm−1 was achieved with the sample containing 40 wt.% salt concentration. The conductivity result can be clarified by the crystallite size obtained from X-ray diffraction (XRD) analysis and field emission scanning electron microscopy (FESEM) images. [ABSTRACT FROM AUTHOR]

Solid polymer electrolytes were prepared using polymethyl methacrylate (PMMA), ethylene carbonate (EC), lithium trifluoroethane-sulfonate (LiTf), magnesium trifluoro-methanesulfonate (MgTf2). The ionic conductivity was measured at 30 °C as 6.17 × 10−6 and 1.83 × 10−4 S cm−1, respectively. The ionic mobility (μ), charge carrier diffusion coefficient (D) and the ion number density (n) of the samples have been calculated to understand the effect of these parameters on the ionic conductivity. The experimentally obtained values of Z r and Z i are compared with theoretical calculations. The PMMA-EC-MgTf2 sample exhibits higher dielectric constant compared to PMMA-EC-LiTf. The MgTf2 containing sample also exhibits a higher transference number. [ABSTRACT FROM AUTHOR]

Poly(acrylamide-co-acrylic acid) (PAAm-PAA) based solid polymer electrolytes (SPEs) containing potassium iodide (KI) have been prepared. The complexation between PAAm-PAA and KI has been identified through the position changes at the asymmetric NH2 stretching and CH2 stretching; and the intensities changes at the amide (C = O, C-N) and carboxylate (COO-) bands using Fourier transform infrared (FTIR) spectroscopy. PAAm-PAA film exhibits a room temperature (RT) ionic conductivity of (8.8 ± 0.8) × 10−11 S·cm−1 which increases to maximum at (4.0 ± 0.5) × 10−7 S·cm−1 with 45 wt.% KI addition. The conductivity-temperature dependence studies of all samples followed the Arrhenius rule. [ABSTRACT FROM AUTHOR]

In this article, the complexation of methylcellulose (MC) with tri-potassium phosphate (K3PO4) is investigated using an ultrasonication-assisted solution cast process. X-ray diffraction (XRD) analysis indicates that varying concentrations of K3PO4 salt (7–35 wt.%) disrupt the crystalline segment of the MC host matrix. The considerable shift in the intensity and orientation of the Fourier transforms infrared spectroscopy (FTIR) transmittance bands indicate the establishment of a charge-transfer entanglement between the polymer host and the dispersed salt. The optimum sample (28 wt.%) exhibits a high ionic conductivity of 1.74 × 10−5 S cm−1, potential stability of 3.48 V, and a cation transference number (ti) of 0.945. These findings show the relevance of the developed SPEs for possible application in electrochemical devices. [ABSTRACT FROM AUTHOR]

Understanding the transport mechanism of Li+ in solid polymer electrolytes is beneficial for improving the safety and energy density of lithium-ion batteries. In this work, we investigate the effects of chain length of poly (ethylene oxide) (PEO) and anions (TfO-, TFSI-, PFSI-) on ion transport properties in PEO-lithium salt systems using all-atom molecular dynamics simulations. We found that the Li+ and PEO monomers are co-diffusion, regardless of the PEO chain length and the type of anion. The diffusion of Li+ becomes slower with PEO chain length and reaches an asymptotic value. In addition, the motion of the Li+ is the slowest in PEO/LiTfO systems. We conclude that the free volume of the systems plays a decisive role in the transport properties of Li+. [ABSTRACT FROM AUTHOR]

As a prospective electrolyte for potassium-ion batteries, porous polymer electrolytic membranes were prepared based on poly (vinylidene difluoride-co-hexafluoropropylene) (PVDF-co-HFP) by a solution cast method. The casting solution, effects of the solvent, non-solvent and addition of nanoscale TiO2 particles were investigated in this study. The membranes were characterized by scanning electron microscopy (SEM) results in the surface morphology and porous nature of the fabricated membrane. X-ray diffraction (XRD) analysis gives the crystalline phase of the TiO2 doped membrane. The FTIR confirms the different functional groups present in PVDF-co-HFP films. Electrochemical stability of the prepared PVDF-co-HFP-TiO2 was performed by thermogravimetric analysis (TGA). The charge and discharge tests were conducted using the cyclic voltammetric analysis in this study. The addition of TiO2 particles to the polymer electrolyte was found to reduce the porousness of the PVDF-co-HFP membrane and to enhance the electrolyte uptake, ion conductivity and electrolyte/electrode interfacial stability of the membrane. [ABSTRACT FROM AUTHOR]

All-solid-state Li-ion batteries, have become increasingly important because of their highly reliable solid electrolyte materials. Flexible solid polyethylene oxide (PEO) based electrolytes have been widely studied. Nevertheless, this material exhibits low lithium-ion conductivity. Herein, we report the optimisation of the composition of PEO/polyvinylidene fluoride (PVDF)-based electrolytes to enhance ionic conductivity. When the weight ratio of lithium bis(trifluoromethane sulphonyl)imide and PEO/PVDF is 1:5 (LiTFSI:PEO/PVDF = 1:5), maximum conductivities are 2.98 × 10−5 S cm−1 at 30°C and 5.56 × 10−4 S cm−1 at 60°C. Furthermore, the all-solid-state battery using this solid electrolyte film, a Li metal anode, and a LiFePO4 cathode delivers initial discharge capacities of 149.6 mAhg−1 (0.1 C, 60°C) and 130.2 mAh g−1 (0.5 C, 60°C). Meanwhile, the solid-state lithium battery also presents good cycling performance and excellent rate capability at 60°C. [ABSTRACT FROM AUTHOR]

Recently, solid polymer electrolytes (SPEs) are of great current interest as substitutes to conventional liquid type electrolytes. Although the SPEs significantly alleviate the safety issues of the lithium-ion batteries based on conventional liquid electrolytes, they intrinsically exhibit low ion conductivity. In this study, a bicontinuous solid polymer electrolyte containing polyacrylonitrile (PAN) membrane and a mixture of succinonitrile (SN) and lithium bis(trifluoromethanesulfonyl)imide was prepared with different molarities of the lithium salt. Porous PAN membrane was fabricated via a thermally induced phase separation method (TIPS). The PAN-based SPE exhibited the maximum ionic conductivity of ∼5.0 × 10−3 S/cm at the salt molarity of 1.0 M. [ABSTRACT FROM AUTHOR]

Triblock copolymers comprising chemically complementary poly(ethylene oxide)/polyacrylamide (TBC) and their partially hydrolyzed derivative (TBChydr) were investigated as possible ion-conducting membranes for Li-ion batteries (LBs), dye-sensitized solar cells (DSSCs) and fuel cells (PEFCs). Two TBC samples consisting PEO blocks of variable block length (MnPEO = 6·104 and 3.5·104 kDa) were synthesized and used for these purpose. It was noticed that ionic conductivity of TBC membranes increases with PEO block lengthening from 6.2·10−11 to 3.2·10−9 S⋅cm−1. The introduction of additional ionic groups -COOH in polyacrylamide block of TBC has a positive effect on the conductive characteristics of copolymer membranes. The ionic conductivity of TBC membranes filled with LiPF6 increases with increasing of salt content. [ABSTRACT FROM AUTHOR]