Search

In the Valmala sector of the southern Dora Maira Massif (Western Alps), two different eclogite- and blueschist-facies units (i.e. the Rocca Solei and Dronero units, respectively), are separated by a shear zone (i.e. the Valmala Tectonic Unit), which peculiarly consists of mixed slices of ophiolitic and continental rocks. A detailed geological map at 1:10,000 scale allowed to point out that the tectonic slices within the Valmala Tectonic Unit consist of 'native' rock slices wrenched from the overlying Dronero Unit, and 'exotic' rocks likely sourced from other units of the Dora Maira and from a continental margin and an oceanic basin. On the contrary, rock slices sourced from the underlying Rocca Solei Unit are lacking. The overall tectonic stack results after an early subduction-related deformation phase (i.e. the D1), and the pervasive overprinting of two subsequent exhumation-related deformation phases (i.e. the D2 and D3). The Valmala Tectonic Unit is inferred to have played a role in decoupling the southern Dora Maira Massif during subduction, and/or in driving exhumation of the ultra-high pressure rocks occurring in the adjoining Brossasco-Isasca Unit. [ABSTRACT FROM AUTHOR]

Depending on its chemical and mineralogical composition, the serpentinite represents a peculiar rocky material, which plays a significant role in influencing pedogenetic weathering, vegetation ecology, geo-mechanical and tectonic processes, as well as gravitational slope failure. In serpentinite-bearing environments the response to gravitational stress is more effective than in other rock types. In the Monviso meta-ophiolite Complex (Western Alps), a close relation between landsliding and serpentinite rock occurrences is particularly evident. Our geological map (), at a scale 1:10,000, illustrates the geology and geomorphological features of the Pui-Orgiera giant (2.98 km2) complex landslide, located on the southern slope of the Monviso Massif. This map clearly documents that the characteristics and kinematics of the landslide are closely associated to the anomalous thickening and widening increase of the Baracun Shear Zone, a remnants of an intra-oceanic detachment fault which separates serpentinite and meta-intrusives from metabasalt and metasediments of the Monviso meta-ophiolite Complex. [ABSTRACT FROM AUTHOR]

In the northwestern part of Northern Apennines, between Curone and Staffora Valleys, the tectonic superposition between the External Ligurian Units (i.e. the ophiolitic-bearing chaotic complex of the Groppallo Unit and the non-ophiolitic Cassio Unit), the Middle Eocene – Miocene wedge-top basin Epiligurian Units succession, and the Late Messinian – Pliocene Po Plain succession, records the multistage tectono-stratigraphic evolution from subduction to continental collision. Our geological map, at the 1:20,000 scale, allows us to define 6 main tectonic stages on the basis of (i) the crosscutting relationships between main faults and local to regional stratigraphic unconformities and (ii) the differentiation among different types of chaotic rock unit (olistostromes and broken formations) deposited since Late Cretaceous to late Messinian. This approach provides a new understanding on the tectono-stratigraphic evolution of this sector, and its meaning in the evolution of the northwestern part of Northern Apennines. [ABSTRACT FROM PUBLISHER]

In the Inner Western Alps, three different types of block-in-matrix structures (BIMs) formed sequentially through time at a convergent plate margin. These show the superposition of progressive deformation from (i) subduction to eclogite-facies depths, (ii) collision, accretion, and exhumation of oceanic crust, represented by the Monviso Meta-ophiolite Complex, to (iii) collision, accretion, and exhumation of the continental Dora Maira units. The Type 1 occurs in the metasedimentary cover of the Dora Maira Unit and consists of a map-scale broken formation with boudinaged ‘native’ blocks of marble (Early Jurassic) in a calcschist matrix. It results from the tectonic overprinting of exhumation-related folding (D2-stage) on an earlier subduction-related dismembered succession (D1-stage). Type 1 also includes ‘non-mappable’ BIMs with ‘exotic’ blocks, resulting from the gravitational collapse of the Triassic carbonate platform of European Continental Margin, triggered by the Early Jurassic rifting. In the Monviso Meta-ophiolite Complex, Types 2 and 3 represent tectonically induced broken and dismembered formations, respectively. They differ from each other in the degree of stratal disruption of primary interbedded horizons of mafic metabreccia (Type 3) and mafic metasandstone (Types 2 and 3) sourced by the Late Jurassic–Early Cretaceous denudation of an oceanic core complex. Dismembered interbeds (Type 2) and isolated blocks were mixed together (Type 3) by the overlap of D2 tectonics and late- to post-exhumation extensional shearing (D3-stage). Development of these types of BIMs may be common in many exhumed convergent plate margins, where severe tectonics and metamorphic recrystallization under high-pressure conditions normally prevent the reconstruction of BIMs or mélange-forming processes. Our findings show that documenting the mode and time of the processes forming BIMs is highly relevant in order to reconstruct the oceanic seafloor morphology and composition of associated stratigraphic successions, and their control in the evolution of those convergent plate margins. [ABSTRACT FROM AUTHOR]

In the Northern Apennines of Italy, mud-rich olistostromes (sedimentary mélanges) occur at different stratigraphic levels within the late Oligocene–early Miocene sedimentary record of episutural/wedge-top basins. They are widely distributed along the exhumed outer part of the Ligurian accretionary complex, atop the outer Apenninic prowedge, over an area about 300 km long and 10–15 km wide. Olistostromes represent excellent examples of ancient submarine mass-transport complexes (MTCs), consisting of stacked cohesive debris flows that can be directly compared to some of those observed in modern accretionary wedges. We describe the internal arrangement of olistostrome occurrences in the sector between Voghera and the Monferrato area, analysing their relationships with mesoscale liquefaction features, which are commonly difficult to observe in modern MTCs. Slope failures occurred in isolated sectors along the wedge front, where out-of-sequence thrusting, seismicity, and different pulses of overpressured tectonically induced fluid flows acted concomitantly. Referring to the Northern Apennines regional geology, we also point out a gradual lateral rejuvenation (from late Oligocene to early Miocene) toward the SE and an increasing size and thickness of the olistostromes along the strike of the frontal Apenninic prowedge. This suggests that morphological reshaping of the outer prowedge via mass-transport processes balanced, with different pulses over a short time span, the southeastward migration and segmentation of accretionary processes. The latter were probably favoured by the occurrence in the northwestern part of the Northern Apennines of major, inherited palaeogeographic features controlling the northward propagation of the prowedge. Detailed knowledge of olistostromes, as ancient examples of MTCs related to syn-sedimentary tectonics and shale diapirism, and of their lateral variations in term of age and size, provides useful information in regard to better understanding of both the tectono-stratigraphic evolution of the Apenninic prowedge and the submarine slope failures in modern accretionary wedges. [ABSTRACT FROM AUTHOR]

The External Ligurian and Epiligurian Units in the Northern Apennines of Italy are tectonically juxtaposed with the Tertiary Piedmont Basin along the Villalvernia – Varzi Line, which represents a regional scale fault zone, E-striking. Our map, at the 1:20,000 scale, describes the tectono-stratigraphic evolution of this sector that resulted from multistage faulting along that fault zone. Four main tectonic stages are defined on the basis of the crosscutting relationships between mapped faults and stratigraphic unconformities: late Priabonian – Rupelian, Chattian – early Miocene, late Serravallian – Tortonian, and late Messinian – early Pliocene. Our results demonstrate that since the late Burdigalian, the Villalvernia – Varzi Line was sealed by the gravitational emplacement of a chaotic rock body. The deposition of the late Serravallian – early Messinian succession is controlled by NW-striking strike-slip faults that crosscut to the west the Villalvernia – Varzi Line. Extensional tectonics related to regional scale N-dipping tilting characterized the late Messinian – early Pliocene time interval. [ABSTRACT FROM PUBLISHER]

The Apenninic fold-and-thrust belt in Italy represents one of several interconnected circum-Mediterranean orogens developed after the Late Cretaceous – early Cenozoic closure of Tethys and convergence between the European and African plates. The Geological Map of the Aventino River Valley, at 1:25,000 scale, provides original mapping of the outermost sector of Central Apennines in the Abruzzi region. Focusing on detailed mapping of the crosscutting relationships between the main regional thrust faults and tectonically driven stratigraphic unconformities, the map describes the complex structural and stratigraphic relationships between the Outer Abruzzi units (i.e. Porrara Unit), Apulia – Adriatic deformed units (i.e. Majella and Casoli Units), and the allochthonous Molise and Sicilide units. These tectono-stratigraphic relationships result from four main tectonic stages that occurred sequentially over a short time interval from late Messinian to early Pliocene. [ABSTRACT FROM AUTHOR]