Search

Abstract Nucleic acid amplification testing has great potential for point-of-need diagnostic testing with high detection sensitivity and specificity. Current sample preparation is limited by a tedious workflow requiring multiple steps, reagents and instrumentation, hampering nucleic acid testing at point of need. In this study, we present the use of mixed cellulose ester (MCE) paper for DNA binding by ionic interaction under molecular crowding conditions and fluid transport by wicking. The poly(ethylene) glycol-based (PEG) reagent simultaneously provides the high pH for alkaline lysis and crowding effects for ionic binding of the DNA under high salt conditions. In this study, we introduce Paper-based Abridged Solid-Phase Extraction with Alkaline Poly(ethylene) Glycol Lysis (PASAP). The anionic mixed cellulose ester (MCE) paper is used as solid phase and allows for fluid transport by wicking, eliminating the need for pipetting skills and the use of a magnet to retain beads. Following the release of DNA from the cells due to the lytic activity of the PASAP solution, the DNA binds to the anionic surface of the MCE paper, concentrating at the bottom while the sample matrix is transported towards the top by wicking. The paper was washed by dipping it in 40% isopropanol for 10 s. After air-drying for 30 s, the bottom section of the paper (3 mm × 4 mm) was snapped off using the cap of a PCR tube and immersed in the colourimetric loop-mediated isothermal amplification (cLAMP) solution for direct amplification and colourimetric detection. The total sample processing was completed in 15 min and ready for amplification. cLAMP enabled the detection of 102 CFU/mL of Escherichia coli (E. coli) from culture media and the detection of E. coli in milk

Abstract The paper industry is a major environmental polluter due to paper waste sludge (PWS), often disposed of in hazardous ways. The techniques are employed to disposing of PWS are posing significant environmental hazards and risks to well-being. This study aims to evaluate PWS as a potential replacement for commercial adsorbents like AC and ZEO in treating stabilized leachate. Contact angle analysis of PWS was 92.60°, reveals that PWS to be hydrophobic. Batch adsorption experiments were conducted with parameters set at 200 rpm stirring speed, 120 min contact time, and pH 7. Optimal conditions for COD and NH3–N removal were identified at 120 min contact time, 200 rpm stirring speed, pH 7, and 2.0 g PWS ratio. Removal percentages for COD and NH3–N were 62% and 52%, respectively. Based on the results of the isotherm and kinetic studies, it was observed that the Langmuir and Pseudo second order (PSO) model exhibited greater suitability compared to the Freundlich and Pseudo first order (PFO) model, as indicated by higher values of R-squared (R2). The R-squared of Langmuir for COD and NH3–N were 0.9949 and 0.9919 and for Freundlich model were 0.9855 and 0.9828 respectively. Whereas the R-squared of PFO for COD and NH3–N were 0.9875 and 0.8883 and for PSO were 0.9987 and 0.9909 respectively.

The Bündnis Junger Ärztinnen und Ärzte (BJÄ, Alliance of Young Physicians in Germany) has presented a position paper (PP) on Postgraduate Medical Education (PGME) against the background of an unfolding hospital reform in Germany, and they describe existing deficits of PGME in Germany. Based on this, demands were made of legislators, employers and medical associations which could result in a sweeping reformation of PGME. Hospital reforms can only be accomplished with well trained and motivated physicians. In this respect the BJÄ regards the reform of hospitals and the health-care system as a chance for a reform of PGME, which is long overdue. Legislative competence for PGME lies with the States of the Federal Republic of Germany and this warrants an adjustment of state medical association laws to accommodate the demands of the BJÄ. Generally PGME must be taken into consideration in all health-care legislation, in analogy to the meanwhile globally adopted principle of “Health in all Politics (HiAP)”. The BJÄ has made every endeavour to produce this PP. The responsible stakeholders and actors in the health-care system would be well-advised to take the position paper seriously with a dwindling physician work force in hospitals and serious quality deficits in PGME. Hence, the BJÄ must be comprehensively supported. They need congenial partners to define the scientific foundation of all their demands, to test their application under real life conditions in hospital and outpatient care, to pursue research on the impact on patient care and on the intended transformation of the health-care system. This might best be accomplished by partnering with a scientific as has been the case in many countries for decades.

Abstract Software that employs screening prioritization through active learning (AL) has accelerated the screening process significantly by ranking an unordered set of records by their predicted relevance. However, failing to find a relevant paper might alter the findings of a systematic review, highlighting the importance of identifying elusive papers. The time to discovery (TD) measures how many records are needed to be screened to find a relevant paper, making it a helpful tool for detecting such papers. The main aim of this project was to investigate how the choice of the model and prior knowledge influence the TD values of the hard-to-find relevant papers and their rank orders. A simulation study was conducted, mimicking the screening process on a dataset containing titles, abstracts, and labels used for an already published systematic review. The results demonstrated that AL model choice, and mostly the choice of the feature extractor but not the choice of prior knowledge, significantly influenced the TD values and the rank order of the elusive relevant papers. Future research should examine the characteristics of elusive relevant papers to discover why they might take a long time to be found.

Abstract Background Academic paper writing holds significant importance in the education of medical students, and poses a clear challenge for those whose first language is not English. This study aims to investigate the effectiveness of employing large language models, particularly ChatGPT, in improving the English academic writing skills of these students. Methods A cohort of 25 third-year medical students from China was recruited. The study consisted of two stages. Firstly, the students were asked to write a mini paper. Secondly, the students were asked to revise the mini paper using ChatGPT within two weeks. The evaluation of the mini papers focused on three key dimensions, including structure, logic, and language. The evaluation method incorporated both manual scoring and AI scoring utilizing the ChatGPT-3.5 and ChatGPT-4 models. Additionally, we employed a questionnaire to gather feedback on students’ experience in using ChatGPT. Results After implementing ChatGPT for writing assistance, there was a notable increase in manual scoring by 4.23 points. Similarly, AI scoring based on the ChatGPT-3.5 model showed an increase of 4.82 points, while the ChatGPT-4 model showed an increase of 3.84 points. These results highlight the potential of large language models in supporting academic writing. Statistical analysis revealed no significant difference between manual scoring and ChatGPT-4 scoring, indicating the potential of ChatGPT-4 to assist teachers in the grading process. Feedback from the questionnaire indicated a generally positive response from students, with 92% acknowledging an improvement in the quality of their writing, 84% noting advancements in their language skills, and 76% recognizing the contribution of ChatGPT in supporting academic research. Conclusion The study highlighted the efficacy of large language models like ChatGPT in augmenting the English academic writing proficiency of non-native speakers in medical education. Furthermore, it illustrated the potential of these models to make a contribution to the educational evaluation process, particularly in environments where English is not the primary language.

High prevalence and low control rate of hypertension have brought a significant disease burden globally. In order to improve the level of hypertension prevention and treatment, remote healthcare and digital medicine have been rapidly developed and widely used worldwide. Currently, there are no relevant regulations in China for these technologies. In 2023, the Italian Society of Arterial Hypertension issued a position statement to guide the development, validation, and clinical use of remote medicine and digital healthcare. This article will interpret this position paper, focusing on the forms of application of telemedicine and digital healthcare in managing hypertension and its related cardiovascular diseases, key research evidence, existing advantages, as well as current opportunities and challenges. The aim is to guide general practitioners in China on how to utilize these technologies in managing hypertension and related cardiovascular conditions.

Objective To establish a paper-free system of the total whole blood donation flow in constructing intelligent blood stations, and build digitalized whole blood donation system for practice. Methods A paper-free whole blood collection system was constructed through information process reforming, system frame designing and data network transportation constructing, and was applied in various blood donation scenario. Results Fixed blood collection sites carried out 49 063 donations via paper-free information system from November 2022 to July 2023, and 24 822 donations( group blood donation) were conducted via paper-free system from April to July 2022. Compared with the traditional paper-based model, paper-free system is safer, more standardized and more convenient, effectively enhancing the experience of blood donors. Conclusion The construction of paper-free whole blood collection system effectively enhances the experience of blood donors, improves the safety, accuracy, traceability of the data, and has good social value and economic value, which is worth popularizing.

Background: As the demand for digital dentistry constantly increases, digital devices are gradually replacing conventional methods of recording occlusal contacts. The study aimed to assess the inter-rater reliability of occlusal contact point detection using 40 μm articulating paper, Medit i700, and OccluSense and to compare the distribution of occlusal contacts using the articulating paper and intraoral scanner. Material and Methods: The study included 25 participants aged 20 to 30 (13 women and 12 men). Photographs of contact points were taken and marked in maximum intercuspal position (MIP), in protrusive and laterotrusive movements, on working and non-working sides using 40 μm articulating paper and digital devices. The Cohen’s Kappa coefficient assessed the inter-rater reliability. The Wilcoxon signed-rank test was used to compare dependent groups, articulating paper, and Medit i700. Results: The Cohen’s Kappa index showed that almost perfect agreement was achieved with 40 μm articulating paper. Compared to Medit i700, the 40 μm articulating paper showed an increased mean number of contacts per tooth, except for the third molars. Conclusions: The 40 μm articulating paper has detected more overall contacts than the digital devices, particularly in the posterior areas. An ideal method for registering occlusal contacts has not been established yet.

Abstract Obesity is the one of the most important components of metabolic syndrome. Because obesity related hypertension accounts for two thirds of essential hypertension, managing obesity and metabolic syndrome is a crucial task in the management of hypertension. However, the current non-pharmacological therapies have limitations for achieving or maintaining ideal body weight. Recently, glucagon-like peptide-1 receptor agonists (GLP1-RAs) have demonstrated excellent weight control effects, accompanied by corresponding reductions in blood pressure. GLP1-RAs have shown cardiovascular and renal protective effects in cardiovascular outcome trials both in primary and secondary prevention. In this document, the Korean Society of Hypertension intends to remark the current clinical results of GLP1-RAs and recommend the government and health-policy makers to define obesity as a disease and to establish forward-looking policies for GLP1-RA treatment for obesity treatment, including active reimbursement policies.

Abstract Microfluidic paper-based analytical devices often are combined with scanners as detectors. In this work, different scanning options offered by scanners: resolution, scanning mode, exposure to radiation, colour restoration, and saving format were tested. Moreover, different attempts to mathematical data treatment based on intensities of three channels—Red, Green and Blue, were studied. All measurements presented in this article were conducted for a model dye—bromothymol blue and a model analyte—zinc(II) ion (complexed with xylenol orange in a paper matrix). The article summarizes the scanning options and possibilities of mathematical calculations. Nevertheless, it is suggested that the best option is to use the prior prepared calculation file to paste obtained intensities and compare all presented in this article (and the most frequently used) equations to process intensities and decide which one should be used in the particular analysis.

Abstract Anger suppression is important in our daily life, as its failure can sometimes lead to the breaking down of relationships in families. Thus, effective strategies to suppress or neutralise anger have been examined. This study shows that physical disposal of a piece of paper containing one’s written thoughts on the cause of a provocative event neutralises anger, while holding the paper did not. In this study, participants wrote brief opinions about social problems and received a handwritten, insulting comment consisting of low evaluations about their composition from a confederate. Then, the participants wrote the cause and their thoughts about the provocative event. Half of the participants (disposal group) disposed of the paper in the trash can (Experiment 1) or in the shredder (Experiment 2), while the other half (retention group) kept it in a file on the desk. All the participants showed an increased subjective rating of anger after receiving the insulting feedback. However, the subjective anger for the disposal group decreased as low as the baseline period, while that of the retention group was still higher than that in the baseline period in both experiments. We propose this method as a powerful and simple way to eliminate anger.

Stigma is a widely experienced feature, and recognized as a major factor that facilitates the spread of human immunodeficiency virus (HIV) and acquired immunodeficiency syndrome (AIDS) epidemic. Unifying social work skills and knowledge with faith-based organizations and communities, can contribute to combating HIV/AIDS and relating stigma. Political actions, religious influence, societal engagement, social dynamics, and openness are major modalities combating stigma and assisting prevention efforts. The issue of HIV and AIDS is both problematic and dangerous to affected individuals along with social, economic, political, and spiritual grounds. The disease is spreading rapidly among younger generations around the world. It is a societal challenge to overcome HIV and AIDS and related stigma. There is a great need for courage, commitment, and leadership at all levels, particularly among religious leaders, using social influence to make a difference in the course of the epidemic. They are in a position of authority and able to use the trust of their respective communities to significantly influence the course of the scourge. They have the authoritative means for effective fighting of HIV and AIDS-related stigma. This article presented examples and modalities of combating HIV and AIDS-related stigma in the society by church leaders. They and their respective institutions possess strengths, credibility, and are well-grounded in communities. Spiritual leaders have opportunities to make a practical and real difference in battling HIV and AIDS-related stigma The challenges of stigma experienced by individuals affected by HIV and AIDS calls for faith communities to act as a strong force for transformation that results in healing, hope, and change to all HIV/AIDS-affected individuals and associated stigma. In understanding of issues related to HIV and AIDS stigma, engaging community members and church leaders can contribute to effective program planning and development resources that will address stigma. This paper can encourage social workers to examine how religious leadership structures are positioned to take responsibilities for reducing the effects of HIV and AIDS-related stigma utilizing religious, familial, individual, and community strengths. Finally, this article would inspire social workers to focus on the formation of support groups, and faith-based peer education as well as counseling and support services to ensure that HIV/AIDS-infected people living with associated stigma, especially young people, women, orphans, and other children, receive social, emotional, and spiritual services.

The exponential increase in the number of submissions, further accelerated by generative AI, and the decline in the availability of experts are burdening the peer review process. This has led to high unethical desk rejection rates, a growing appeal for the publication of unreviewed preprints, and a worrying proliferation of predatory journals. The idea of monetarily compensating peer reviewers has been around for many years; maybe, it is time to take it seriously as one way to save the peer review process. Here, I argue that paying reviewers, when done in a fair and transparent way, is a viable solution. Like the case of professional language editors, part-time or full-time professional reviewers, managed by universities or for-profit companies, can be an integral part of modern peer review. Being a professional reviewer could be financially attractive to retired senior researchers and to researchers who enjoy evaluating papers but are not motivated to do so for free. Moreover, not all produced research needs to go through peer review, and thus persuading researchers to limit submissions to their most novel and useful research could also help bring submission volumes to manageable levels. Overall, this paper reckons that the problem is not the peer review process per se but rather its function within an academic ecosystem dominated by an unhealthy culture of ‘publish or perish’. Instead of reforming the peer review process, academia has to look for better science dissemination schemes that promote collaboration over competition, engagement over judgement, and research quality and sustainability over quantity.

The exponential increase in the number of submissions, further accelerated by generative AI, and the decline in the availability of experts are burdening the peer review process. This has led to high unethical desk rejection rates, a growing appeal for the publication of unreviewed preprints, and a worrying proliferation of predatory journals. The idea of monetarily compensating peer reviewers has been around for many years; maybe, it is time to take it seriously as one way to save the peer review process. Here, I argue that paying reviewers, when done in a fair and transparent way, is a viable solution. Like the case of professional language editors, part-time or full-time professional reviewers, managed by universities or for-profit companies, can be an integral part of modern peer review. Being a professional reviewer could be financially attractive to retired senior researchers and to researchers who enjoy evaluating papers but are not motivated to do so for free. Moreover, not all produced research needs to go through peer review, and thus persuading researchers to limit submissions to their most novel and useful research could also help bring submission volumes to manageable levels. Overall, this paper reckons that the problem is not the peer review process per se but rather its function within an academic ecosystem dominated by an unhealthy culture of ‘publish or perish’. Instead of reforming the peer review process, academia has to look for better science dissemination schemes that promote collaboration over competition, engagement over judgement, and research quality and sustainability over quantity.

Introduction: Theory papers have been the most commonly employed method to assess learning outcomes in medical education. In these papers, both recall abilities and higher-order cognitive functions need to be assessed giving proper weightage as per relevance. Hence it becomes necessary that valid assessment methods are employed to evaluate the required objectives/competencies. The objective of the study was to develop a method for analyzing postgraduate question papers of various specialties. Methodology: A rubric matrix was created with three broad objective criteria to assess framing and layout of the questions in each paper, analysis of different sets for same examination, and finally an overall assessment of all the papers for each subject. Results: A total of 28 specialty papers were available. A total number of papers analysed = 340. The overall mean score out of total 60 marks was 38.64 ± 4.5. It was seen that the majority (60%) of the departments have been graded as fair on analysis of the theory papers. None of the departments were graded as very good, while 7% of them were graded as good. Although a very minuscule percentage of the papers had grammatical errors and duplication of questions in the sets, only 57% of the departments had done a proper moderation and 21% had used higher domains of learning for assessment. Conclusion: Analysis of postgraduate question papers showed that the questions asked for postgraduates are more recall-based instead of higher taxonomy of cognitive domain.

Abstract Background Paediatric orthopaedics is a significant and difficult for undergraduate students to master. During the COVID-19 pandemic, we used the WeChat platform to combine the advantages offered by problem-based learning (PBL), case-based learning (CBL) and paper review teaching methods to establish a new blended online teaching model and demonstrated its feasibility and effectiveness. Objective This study aims to demonstrate the feasibility and effectiveness of a new blended pedagogical method that uses the WeChat platform and combines PBL, CBL and paper review. Methods We enrolled 22 students participating in the Department of Paediatric Orthopaedics. They participated in the WeChat blended pedagogy mode. Their departmental rotation examination scores were compared with those of 23 students who participated in the traditional teaching method. Moreover, an anonymous questionnaire was used to evaluate students’ perceptions and experiences. Results The total average scores of students who participated in the WeChat blended pedagogy mode and the traditional teaching method were 47.27 and 44.52, respectively. There were no statistically significant differences between the online teaching mode and the traditional teaching method in terms of possessing professional accomplishment, gaining knowledge and promoting interpersonal skills (P = 0.07, P = 0.12 and P = 0.65, respectively). In terms of independent clinical thinking, self-improving capability and improving clinical skills, the scores associated with the WeChat blended pedagogy mode were 8.00, 8.00 and 6.00, whereas those associated with the traditional teaching method were 6.70, 6.87 and 7.48. The overall satisfaction with the WeChat blended pedagogy mode reached 100%. A total of 64%, 86%, 68%, 64% and 59% of students chose very large or large in response to the items concerning professional accomplishment, knowledge absorption, independent clinical thinking skills, English reading and literature exploring capacity, as well as interpersonal skills, respectively. Fifteen participants claimed that the WeChat blended pedagogy mode was less helpful to them with regard to promoting the improvement of their clinical skills. Nine students claimed that the WeChat blended pedagogy mode was time-consuming. Conclusions Our study verified the feasibility and effectiveness of the WeChat blended pedagogy mode for undergraduate paediatric orthopaedics internships. Trial Registration Retrospectively registered.

Objective: In Japan, paper-based surveys are currently more effective than web-based surveys. This study compared the response rates and lifestyle behaviors between paper- and web-based surveys conducted among Japanese junior and senior high schools. Methods: In total, there were 42 and 64 junior and senior high schools, respectively, for the web-based surveys and 20 and 27 junior and senior high schools, respectively, for the paper-based surveys. The questionnaire covered lifestyle behaviors (e.g., alcohol consumption, smoking, exercise, eating, and sleep status), mental health, and plans to attend college. School- and student-level response rates by survey method were assessed, and so was the effect on the reporting of each lifestyle behavior using logistic regression models. Results: The school response rates were 16.0% and 38.3% for web- and paper-based surveys, respectively. The student response rates were 88.7% and 77.2%, respectively. The web-based group had significantly more female participants and lower response rates for higher grades in senior high schools. The odds of lifetime and current alcohol consumption and poor mental health were lower, whereas those of lifetime use of conventional cigarettes, shorter sleep duration, and plans to continue attending college were higher among web-based (vs. paper-based) participants. Conclusions: The school response rate was poor in the web-based survey. However, whether the differences in lifestyle behavior are attributed to selection bias or the survey method remains unclear.

Introduction: Assessments direct students towards learning. There are three types of learning: cognitive, affective, and psychomotor. While all three are interlinked, the cognitive domain, which covers knowledge and intellectuality, is foundational and can be assessed through theory examinations. Theory exams are the best way to test the cognitive domain of a learner, while practical exams can assess the psychomotor and affective domains. Since the question paper is the most important tool in theory exams, it is essential that the question paper covers relevant topics and tests all levels of cognitive learning, which encompass knowledge, comprehension, application, analysis, synthesis, and evaluation. Aim: To assess the level of cognitive domains assessed and the weightage allocated to various topics in the undergraduate summative examination question paper of community medicine. Materials and Methods: A cross-sectional study was conducted at Department of Community Medicine, Pramukh Swami Medical College and Sri Krishna Hospital, Bhaikaka University, Karamsad, Anand, Gujarat, India in which the five-year question papers (2016-2020) from five Universities were analysed to assess the level of cognitive domains and the weightage assigned to various topics. Each question was categorised as recall, comprehension, or application based on the cognitive domain it assessed. Furthermore, each question was analysed to determine the topic it pertained to, and the marks allocated to that question were assigned to the corresponding topic. Results: The majority of marks in Universities 1, 2, 3, 4, and 5 were, respectively allocated as follows: 324 (80.62%), 459 (84.66%), 453 (75.5%), 895 (89.5%), and 379 (63.16%) for questions testing the recall ability of the learners. For questions assessing comprehension ability, the marks allotted were 20 (4.87%), 0, 81 (13.5%), 65 (6.5%), and 51 (8.15%). The fewest marks were assigned to questions testing application, synthesis, or evaluation abilities. Epidemiology had the highest weightage in all five Universities, with marks of 73 (18.25%), 75 (13.89%), 93 (15.5%), 141 (14.1%), and 83 (13.83%). Conclusion: The cognitive domains assessed in the subject across all five Universities were unsatisfactory. The weightage of marks allotted to topics varied, highlighting the need to develop a question paper plan that facilitates a systematic distribution based on different levels of cognitive domains and topics.

Abstract Energy storage devices (ESD) which are intended to power electronic devices, used in close contact of human skin, are desirable to be safe and non-toxic. In light of this requirement, Zn based energy storage devices seem to provide a viable pathway as they mostly employ aqueous based electrolytes which are safe and non-toxic in their functioning. Additionally, having a flexible ESD will play a crucial role as it will enable the ESD to conform to the varying shapes and sizes of wearable electronics which they energize. In this work, we have developed an inkjet-printed Zinc ion battery (IPZIB) with planar electrode configuration over bond paper substrate. Zn has been used as the negative electrode, MnO2 is used as the positive electrode with Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the active binder. Conducting tracks of reduced graphene oxide (rGO) are used to construct the current collector on the paper substrate. The fabricated IPZIB delivered a high discharge capacity of 300.14 mAh g−1 at a current density of 200 mA g−1. The energy density of the IPZIB is observed as 330.15 Wh kg−1 at a power density of 220 W kg−1 and retains an energy density of 94.36 Wh kg−1 at a high power density of 1650 W kg−1. Finally, we have demonstrated the capability of the IPZIB to power a LED at various bending and folding conditions which indicates its potential to be used in the next generation flexible and wearable electronic devices.

The enhanced paper grip test (EGPT) quantitatively assesses lower limb strength. EGPT assesses the hallux grip force by reacting a pulling force derived from a card, being positioned underneath the participant's hallux. This study aimed to investigate the repeatability and clinical applicability of the EPGT for assessing foot muscle strength. EPGT force was measured using a dynamometer. The reliability of the measurement of EPGT force was assessed by having two examiners performing the test on the same group of healthy adults. Clinical applicability was assessed in community-dwelling adults of both genders. EPGT force was recorded for both feet using the same standardised protocol for all participants. Regarding reliability, 20 healthy adults aged 23.04±5.5 years participated in the present study. The EGPT demonstrated good to excellent test-retest (ICC1,2 0.8 to 0.86) and interrater reliability (ICC1,2 0.82 to 0.88). A convenience sample of 15 community-dwelling adults (71.6±7.8 years, 68.5% women) was recruited for clinical applicability testing. All participants performed the test with mean score 15±5.7 N. EPGT is a reliable measurement of the hallux grip force strength and can be used for clinical and research purposes.

N/a.

When deciding which submissions should be peer reviewed, eLife editors consider whether they will be able to find high-quality reviewers, and whether the reviews will be valuable to the scientific community.

N/a.

Basic computer skills are essential for authors writing research papers as it has the potential to make the task easier for a researcher. This article provides a glimpse about the essential software programs for a novice author writing a research paper. These software applications help streamline the writing process, improve the quality of work, and ensure that papers are formatted correctly. It covers word processing software, grammar correction software, bibliography management software, paraphrasing tool, writing tools, and statistical software. All of the tools described are free to use. Hence, it would help researchers from resource-limited settings or busy physicians who get lesser time for research writing. We presume this review paper would help provide valuable insights and guidance for novice authors looking to write a high-quality research paper.

Brachytherapy is a type of radiation therapy, in which a radiation source is placed directly or close to a tumor. It is commonly used to treat skin cancer, and enables precise irradiation treatment of affected area (planning target volume – PTV) while minimizing exposure dose to surrounding healthy tissue (organs at risk – OARs). Recently, the use of 3D printing has begun revolutionizing brachytherapy, as it allows manufacturing of custom-designed applicators for unique shape of skin topography, tumor, and surrounding tissues. Outcome of the combination of 3D printing and brachytherapy has several advantages over traditional treatment planning methods. Some of the advantages are intuitive, whereas others can be concluded from a literature overview as follows: 1) Possibility of developing patient-specific applicators that precisely match the shape of tumor area; 2) Reduction of the time required for applicator production, especially when custom-made devices are needed; 3) Reduction of manufacturing costs; 4) Treatment procedures improvement; 5) Improvement of safety measures accelerated by the development of smart materials (e.g., polymer filaments with admixture of heavy elements); 6) Possibility of nearly instant adjustment into tumor treatment (applicators can be changed as the tumor is changing its shape); and 7) Applicators designed to securely fit to treatment area to hold radioactive source always in the same place for each fraction. Consequently, tumor-provided dose is accurate and leads to effective treatment. In this review paper, we investigated the current state-of-the-art of the application of 3D printing in brachytherapy. A number of existing reports were chosen and reviewed in terms of printing technology, materials used, treatment effectiveness, and fabrication protocols. Furthermore, the development of future directions that should be considered by collaborative teams bridging different fields of science, such as medicine, physics, chemistry, and material science were summarized. With the indicated topics, we hope to stimulate the innovative progress of 3D printing technology in brachytherapy.

Abstract Oil-immersed transformers are expensive equipment in the electrical system, and their failure would lead to widespread blackouts and catastrophic economic losses. In this work, an elaborate diagnostic approach is proposed to evaluate twenty-six different transformers in-service to determine their operative status as per the IEC 60599:2022 standard and CIGRE brochure. The approach integrates dissolved gas analysis (DGA), transformer oil integrity analysis, visual inspections, and two Back Propagation Neural Network (BPNN) algorithms to predict the loss of life (LOL) of the transformers through condition monitoring of the cellulose paper. The first BPNN algorithm proposed is based on forecasting the degree of polymerization (DP) using 2-Furaldehyde (2FAL) concentration measured from oil samples using DGA, and the second BPNN algorithm proposed is based on forecasting transformer LOL using the 2FAL and DP data obtained from the first BPNN algorithm. The first algorithm produced a correlation coefficient of 0.970 when the DP was predicted using the 2FAL measured in oil and the second algorithm produced a correlation coefficient of 0.999 when the LOL was predicted using the 2FAL and DP output data obtained from the first algorithm. The results show that the BPNN can be utilized to forecast the DP and LOL of transformers in-service. Lastly, the results are used for hazard analysis and lifespan prediction based on the health index (HI) for each transformer to predict the expected years of service.

Abstract As the social organism, Polistes wasps build a communal nest using woody fibers with saliva for sustaining brood and adult population throughout the season. Limited information exists regarding the identification specific plant materials employed in wasp nest building. Thus, we firstly tested if the DNA metabarcoding approach utilizing rbcL and trnL molecular markers could identify the plant species quantitatively and qualitatively inform the mixed-origin woody samples. A threshold of 0.01 proportion of reads was applied for rbcL and trnL molecular markers, while this threshold for median proportion was 0.0025. In assessing taxa richness, the median proportion demonstrated superior performance, exhibiting higher taxa detection power, however, rbcL marker outperformed in quantitative analysis. Subsequently, we applied DNA metabarcoding to identify the plant materials from the nests of two Polistes species, P. mandarinus and P. rothneyi. The results showed that higher preference of Quercus and Robinia as the major nest building materials regardless of the surrounding plant communities, by two wasp species. Material diversity was higher for P. rothneyi than P. mandarinus, which may explain the abundance of this species possibly with heightened adaptive capacities in their nesting behavior. This study demonstrated that DNA metabarcoding could identify the complex nest-building plant materials of paper wasps and provide insights into their ecological interactions in the natural ecosystem.

Abstract Traditionally, cellulose nanofiber (CNF) production has primarily relied on virgin cellulose sources. Yet, the shift to using paper mill sludge (PMS) as a source for CNF underscores the significance of reusing and recycling industrial byproducts. PMS contains significant amounts of cellulose that can be extracted as a raw material. The purpose of present study is to provide a sustainable approach to PMS utilization as a paper coating additive in the cellulose nanofibrils (CNFPMS) form via simply scalable wire-wound rod coating method. The effect of CNFPMS additive amounts at two coating layers on microstructure and surface properties of coatings such as porosity, air permeability surface roughness and optical properties such as brightness, gloss and CIE L*a*b* is studied, which they can also provide insight for the eventual print performance. Results indicated that the obtained CNFPMS in paper coating shows 52% decrease in porosity, presenting significant improvement in the coating microstructure. The marginal increase in permeability coefficient and surface roughness, 54% and 10%, respectively, suggests improving color reproduction and preventing color density losses. Optical analysis showed slight decrease in brightness and gloss, as was expected. Notably, the lightness was improved, which also indicates increasing color gamut volume in printing applications. As a result, the current work offers a sustainable approach to manage PMS for use in paper coatings as a high-value-added material.

BackgroundMeasurement-based care in behavioral health uses patient-reported outcome measures (PROMs) to screen for mental health symptoms and substance use and to assess symptom change over time. While PROMs are increasingly being integrated into electronic health record systems and administered electronically, paper-based PROMs continue to be used. It is unclear if it is feasible to administer a PROM on paper when the PROM was initially developed for electronic administration. ObjectiveThis study aimed to examine the feasibility of patient self-administration of a 2-part substance use screener—the Tobacco, Alcohol, Prescription medications, and other Substances (TAPS)—on paper. This screener was originally developed for electronic administration. It begins with a limited number of questions and branches to either skip or reflex to additional questions based on an individual’s responses. In this study, the TAPS was adapted for paper use due to barriers to electronic administration within an urgent care behavioral health clinic at an urban health safety net hospital. MethodsFrom August 2021 to March 2022, research staff collected deidentified paper TAPS responses and tracked TAPS completion rates and adherence to questionnaire instructions. A retrospective chart review was subsequently conducted to obtain demographic information for the patients who presented to the clinic between August 2021 and March 2022. Since the initial information collected from TAPS responses was deidentified, demographic information was not linked to the individual TAPS screeners that were tracked by research staff. ResultsA total of 507 new patients were seen in the clinic with a mean age of 38.7 (SD 16.6) years. In all, 258 (50.9%) patients were male. They were predominantly Black (n=212, 41.8%), White (n=152, 30%), and non-Hispanic or non-Latino (n=403, 79.5%). Most of the patients were publicly insured (n=411, 81.1%). Among these 507 patients, 313 (61.7%) completed the TAPS screener. Of these 313 patients, 76 (24.3%) adhered to the instructions and 237 (75.7%) did not follow the instructions correctly. Of the 237 respondents who did not follow the instructions correctly, 166 (70%) answered more questions and 71 (30%) answered fewer questions than required in TAPS part 2. Among the 237 patients who did not adhere to questionnaire instructions, 44 (18.6%) responded in a way that contradicted their response in part 1 of the screener and ultimately affected their overall TAPS score. ConclusionsIt was challenging for patients to adhere to questionnaire instructions when completing a substance use screener on paper that was originally developed for electronic use. When selecting PROMs for measurement-based care, it is important to consider the structure of the questionnaire and how the PROM will be administered to determine if additional support for PROM self-administration needs to be implemented.

BackgroundThis study has two primary objectives. Firstly, it aims to measure the time savings achieved through the digitization of paper forms filled out by nurses in the inpatient care process. Secondly, it seeks to reveal the financial savings resulting from reduced paper consumption due to the digitalization. The Health Information Management System Society (HIMSS)—Electronic Medical Record Adaption Model (EMRAM), which makes stage-based (0–7) evaluations, serves as a tool to measure the rate of technology utilization in public hospitals in Turkey. The study is based on the HIMSS EMRAM criteria for 2018. Bahçelievler State Hospital, a public hospital in Turkey, was chosen as the research facility. In 2017, it was accredited as Stage 6 with HIMSS EMRAM. However, not all its wards have been digitalized. Initially, pilot selected wards were digitized. Therefore, digital and non-digital wards serve together. In this context, 4 wards were randomly selected and time, paper and toner savings before and after digitalization were measured.MethodA table was created in Microsoft Excel,listing the forms used by nurses in inpatient care and the time required to fill them out.The time spent for filling paper-based forms and digital-based forms was measured in randomly selected wards.ResultThe analysis showed that digital forms saved more time, paper and toner. For example, filling out the patient history form took 45 min when using paper, compared to 12 min in digital environment. Approximately 27% time savings are achieved only for the patient history form. The total time savings delivered by digitalization for 1,153 inpatients during the year were found as 117 care days, and the savings on total paper consumption was 41.289 pages. For 1,153 inpatients throughout the year, the total time savings from digitalization was 117 care days and the total paper consumption savings was 41,289 pages. In addition, in 4 wards with a total bed capacity of 25, annual paper savings of $1,705.86 and toner savings of $283,736 were achieved.DiscussionThis study reveals the benefits of digitalisation in hospitals for nurses. It saves the time that nurses allocate for filling out paper forms with digitalised forms. Thus, it is a good practice example in terms of using the time allocated for form filling for patient care.When we extend this study to Turkey in general, it can be considered that the time savings achieved by nurses by digitizing inpatient forms varies between 10.8% and 13%. The number of nurses working in public hospitals in Turkey is approximately 160,000. Assuming that 60% of the nurses work in the inpatient ward, it is understood that the annual savings achieved by digitizing the forms corresponds to a range of 398–559 nursing hours.

Objectives To map the current use of paper-based and/or screen-based media for health education aimed at older people.Design A scoping review was reported following the Preferred Reporting Items of Systematic Reviews and Meta-analyses for Scoping Reviews checklist.Data sources The search was carried out in seven databases (Scopus, Web of Science, Embase, Medline, CINAHL, ACM Guide to Computing Literature, PsycINFO), with studies available from 2012 to the date of the search in 2022, in English, Portuguese, Italian or Spanish. In addition, Google Scholar was searched to check the grey literature. The terms used in the search strategy were older adults, health education, paper and screen-based media, preferences, intervention and other related terms.Eligibility criteria Studies included were those that carried out health education interventions for older individuals using paper and/or screen-based media and that described barriers and/or facilitators to using these media.Data extraction and synthesis The selection of studies was carried out by two reviewers. A data extraction form was developed with the aim of extracting and recording the main information from the studies. Data were analysed descriptively using Bardin’s content analysis.Results The review included 21 studies that carried out health education interventions with different purposes, the main ones being promotion of physical activity, hypertension prevention and psychological health. All 21 interventions involved screen-based media on computers, tablets, smartphones and laptops, while only 4 involved paper-based media such as booklets, brochures, diaries, flyers and drawings. This appears to reflect a transition from paper to screen-based media for health education for the older population, in research if not in practice. However, analysis of facilitators and barriers to using both media revealed 10 design factors that could improve or reduce their use, and complementarity in their application to each media type. For example, screen-based media could have multimedia content, additional functionality and interactivity through good interaction design, but have low accessibility and require additional learning due to complex interface design. Conversely, paper-based media had static content and low functionality but high accessibility and availability and a low learning cost.Conclusions We recommend having improved screen-based media design, continued use of paper-based media and the possible combination of both media through the new augmented paper technology.Registration number Open Science Framework (DOI: 10.17605/OSF.IO/GKEAH).

Objectives: This review aimed to determine the form, results, and barriers to exercise-based rehabilitation programs for severe COVID-19 survivors. Methods: Searching for the article was carried out from August to October 2021. We used the PubMed database as a search media with the keywords ([‘COVID-19’ OR ‘COVID 19’ OR ‘SARS CoV-2’ OR ‘post COVID-19’] AND [‘rehabilitation’]). Original articles and case reports published in the last 2 years (July 2019-2022), written in English, available in full text, and accessible in PDF or HTML format were included. Articles were excluded if they did not fit the research topic after reading the full text. Results: There were a total of 7461 articles found at the initial screening using keywords. In the next screening using the inclusion and exclusion criteria and after reading the whole article, we found 9 articles that matched the topic. Of these, 7 articles were original articles and 2 case reports. All of the articles explained the forms and outcomes of exercise-based rehabilitation in severe cases of COVID-19 survivors. However, no article explained the barriers to rehabilitation. Discussion: Exercise was generally given to increase exercise tolerance in severe COVID-19 survivors in both inpatient and outpatient cardiopulmonary rehabilitation programs. The form of exercise was aerobic, strength, or endurance training, and other forms of exercise such as balance training as well as breathing exercises. The type and intensity of exercises given were tailored to the patient’s needs. Research showed that exercise-based rehabilitation programs resulted in a positive impact on increasing the survivor’s quality of life, functional capability, and exercise tolerance. A previous study explained that barriers to rehabilitation in COVID-19 were related to the patient’s health condition, COVID-19 infectivity, and issues related to health services.

Abstract This article presents the results of an experiment designed to study the impact of temperature on the characteristic parameters of creeping discharges. The insulating interfaces consist of a thermally enhanced cellulose surface immersed in mineral oil, palm kernel oil methyl ester (PKOME) and castor oil methyl ester (COME). The study was carried out under a standard negative lightning impulse voltage (1.2/50 μs). The article also presents the complete algorithms for calculating the maximum extension of the discharges, the ionisation rate and the charge produced by them. The results of the study show that temperature favors the propagation of discharges and the ionisation rate. It was observed that liquids with a higher dielectric constant and high electrical conductivity were more exposed to the impact of temperature. The results show ionisation increments of 0.973%/°C, 1.093%/°C and 1.076%/°C in mineral oil (MO), COME and PKOME respectively. The maximum extension of the discharges shows a linear evolution with the applied voltage and temperature but a non-linear increment with the temperature. As for the charge produced, it shows a constant increment with temperature and voltage in each liquid. These values are (5.839%/°C, 1.977%/kV), (6.047%/°C, 2.082%/kV) and (6.177%/°C, 2.113%/kV) respectively in MO, COME and PKOME.

This study was conducted to identify promising applications of green silver nanoparticles (AgNPs) prepared from a bark extract of Sweetinia mahagoni (Sm). The green synthesized Sm-AgNPs were characterized using various spectroscopy methods. AgNPs were first investigated using ultraviolet–visible spectroscopy, and the metal nanoparticles exhibited an intense surfaceplasmon resonance (SPR) peak at different wavelengths. The green synthesized Sm-AgNPs had an SPR peak at 430 nm, which confirms the formation of Sm-AgNPs. In addition, Fourier transform infrared (FTIR) spectroscopy was conducted to determine the bioactive compounds of bark extract that actively participate in the reduction of Sm-AgNPs, and the results revealed O−H stretching of free hydroxyl alcohol and phenols, N−H bonds of primary amines, S＝O stretching of sulfoxide in aromatic groups, C−I stretching due to aliphatic iodo compounds, and C−Br stretching by halo compounds of the bark extract which might reduce and stabilize Sm-AgNPs. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) results revealed that Sm-AgNPs were approximately irregular spheres. EDS results revealed the complete reduction of silver to elemental silver. The particle size analysis of Sm-AgNPs was conducted using dynamic light scattering (DLS), and the results revealed that Sm-AgNPs were polydisperse with an average size range from 35.8 to 47.8 nm, an average mean size of 41.3 nm, and a Z average of 37.7 nm. Sm-AgNPs had a negative zeta potential value of −19.0 mV, indicating that Sm-AgNPs were very stable in colloidal form. Further studies were carried out to demonstrate their usefulness in industrial and biomedical applications. In these studies, Sm-AgNPs exhibited a very good antibacterial activity against both Gram-negative and Gram-positive bacteria. In addition to regular assays, we also investigated important industrial applications such as the reduction of toxic hexavalent chromium to a nontoxic form and sensing of Hg2+ ions. The results revealed that Sm-AgNPs had an excellent performance in biosensor applications such as sensing and detecting mercury at parts per million/parts per billion levels. In conclusion, green Sm-AgNPs are promising materials in therapeutic and industrial applications.

Objective Since the emergence of COVID-19, university education has drastically transformed into digital-based learning (DBL). Online education has been well recognised as a promising mode of teaching; however, only a limited number of studies have reported the students’ preferred format for academic learning.Design Cross-sectional.Setting The study was conducted in a university setting in Japan. A Google Forms online questionnaire was distributed to the participants between April and May 2022.Participants A total of 939 undergraduate medical, nursing and pharmaceutical students in the pre-clinical grade were recruited, and 344 were included in the final analysis.Primary and secondary outcome The questionnaire assessed students’ format preferences between paper-based learning (PBL) and DBL as it pertained to academic performance and eyestrain. In terms of academic performance, comprehension, memory retention and absorption (concentration) were assessed. We also explored the association between students’ daily time spent using DBL and their digital preference by the Cochran-Armitage trend test and logistic regression analysis.Results A total of 344 (191 medical, 73 nursing and 80 pharmaceutical) university students completed the questionnaire (response rate 36.6%). An even distribution was observed in the preferred learning format for comprehension: PBL (32.0%), both formats equivalent (32.8%) and DBL (35.2%; digital preference). Only few students preferred DBL for memory retention (6.1%), absorption (6.7%) and eyestrain (1.2%). Although a positive association was observed between daily time spent using DBL and digital preference for comprehension, there was no association for memory retention, absorption and eyestrain.Conclusion Among university students, DBL was just as preferred as PBL for comprehension; however, only a few students reported that DBL was better in terms of memory retention, absorption and eyestrain. A learning environment where students can study using PBL should be continued.

Zabihollah Yousefi1, Reza-Ali Mohmadpour 2, Ebrahim Zarei3, Mansour Barafrashtehpour 4 1 PhD, Department of Environmental Health Engineering, School of Health and Health Sciences Research Center, Mazandaran University of Medical Sciences, Sari, Iran 2 PhD, Professor, Department of Statistics, School of Health, Mazandaran University of Medical Sciences, Sari, Iran 3 Lecturer, Department of Analytical Chemistry, University of Mazandaran, Sari, Iran 4 MSc, Department of Environmental Health Engineering, Student Research Committee, School of Health, Mazandaran University of Medical Sciences, Sari, Iran In the article published in volume 23, issue Suppl 2, 2014, the first author’s name was incorrect. It should have been Zabihollah Yousefi, which is now corrected.

Abstract The surface modification of filters with large pore sizes for the development of low-cost gravity-driven point-of-use (POU) technologies for water disinfection can be an effective strategy to empower people to access safe water instantly, especially in low- and middle-income countries. In this study, the surface of commercial cellulose filter papers, as cheap and bio-based filters, was modified with polydopamine (PDA), polyethyleneimine (PEI) and ZnO/Ag/GO nanocomposite (ZnO/Ag/GO@PDA/PEI papers) for bacterial removal from water. PDA/PEI incorporation introduced a cationic functional layer, which can entrap negative bacteria and make a stable chemical bond with the nanocomposite. ZnO/Ag/GO exhibited promising synergistic antibacterial activities (30 times stronger than ZnO). As a result, 3 sheets of ZnO/Ag/GO@PDA/PEI papers showed a 99.98% bacterial reduction (E. coli), which met the WHO standards. Moreover, the leached zinc and silver in the filtrate were far below the WHO’s limits (380 and 10 ppb, respectively). The results showed that the modified papers could be reused multiple times. After six times of reuse, the flow rate dropped slightly (below 20%) and the bacterial removal efficiency was more than 99.9%. This study is valuable for developing filters for treating bacterial-contaminated water on-site with no need for energy, which is a demand in many countries.

Abstract Trimethylsilyl cellulose (TMSC) was employed as the coating matrix for the application of zinc oxide nanoparticles (ZnO) onto paper surfaces and the protections of ZnO/TMSC coating against UV-induced damages and fungal spoilage were evaluated. Filter papers were immersed in 2% w/v TMSC solution loaded with ZnO and air-dried. Three ZnO/TMSC suspensions were prepared with 0.1, 0.5, and 1% w/v ZnO NPs. The presences of ZnO/TMSC protective layers were confirmed with ATR-IR spectroscopy. The coated papers exhibited high surface hydrophobicities. After the coated papers were subject to 365-nm UV irradiation at 400 W for 3 h, the contact angles dramatically dropped. The trimethylsilyl (TMS) groups exposed on the surface formed a moisture barrier and were partially removed on UV exposure. ATR-IR revealed that more TMS groups were removed in the protective layer with no ZnO. UV-irradiated papers turned yellow and papers protected with 1% ZnO/TMSC exhibited significantly lower color changes than that of the uncoated one. Compared to the TMSC-coated paper, the addition of ZnO resulted in a significant reduction in tensile strength at maximum. However, after UV irradiation, significant increases in both the strain at break and strength at maximum were only observed in 1% ZnO/TMSC-protected papers. Regarding their anti-fungal properties, the 1% ZnO/TMSC films were effective in growth inhibitions of Aspergillus sp. and Penicillium sp. on the nonirradiated papers. Despite being hydrophilic after UV-irradiation, growths of the molds were severely suppressed on the UV-irradiated paper.

Besluit European Summit, Wroclaw, september 2008

The objective of academic training is to prepare midwives as independent healthcare professionals to make a substantial contribution to the healthcare of women in their reproductive years as well as to the health of their children and families. This article therefore describes the professional and educational requirements derived from the legal midwifery competencies within the new midwifery act. Furthermore, it identifies the conditions that need to be established to enable midwives in Germany to practise to their full scope in compliance with statutory responsibilities. Educational science, academic efforts, policymaking and accompanying research should work in synergy. This in turn enables midwives to achieve the maximum scope of their skills, with the objective of promoting physiological pregnancies and births. Consequently, it can strengthen early parenthood in alignment with the national health objectives of “health around childbirth”.The academisation of the midwifery profession presents a profound opportunity for professional development in Germany. It is essential that midwives receive training based on the principles of educational science and care structures that are yet to be developed. This can enable them to perform within the wide range of their professional tasks to the highest standards, thereby ensuring the optimal care of their clients. Moreover, there is a chance to implement sustainable improvements in healthcare provision for women and their families during the reproductive phase and the period of parenthood in Germany.

The current situation in Germany is characterised by significant differences between the two types of higher education institutions offering bachelor's degree programmes in midwifery at both universities of applied sciences and universities. These differences are noticeable in admission procedures, resource allocation, content focus and competence assessment at the respective institutions, which in turn result in heterogeneous study experiences. This article highlights the challenges currently facing bachelor degree programmes and the academic qualification of midwives, and identifies future requirements for the development of degree programmes in theory and practice as well as theory-practice transfer, and assessment formats. Furthermore, this article covers the content-related and structural-organisational requirements to develop in-depth academic skills grounded in theory teaching, the facilitation of clinical placements at an academic level, the training of qualified practical instructors and the development of applicable competence-based assessment formats, especially for the state exam.The development of a standardised, high-quality academic education for midwives in Germany requires networking of the different academic sites/locations to exchange experiences in teaching/learning and assessment formats. Furthermore, it can facilitate the development of a standardised competence-oriented model and core curriculum as well as the definition of quality criteria and standards for study programmes of midwifery science. The Midwifery Science Committee (AHW) in the DACH Assoviation for Medical Education (GMA) offers an optimal platform for cooperation between the different universities. The existing challenges for the further professional development of midwives can only be overcome by collaboration and pooled expertise.

Introduction Paediatric concussion is a common injury. Approximately 30% of youth with concussion will experience persisting postconcussion symptoms (PPCS) extending at least 1 month following injury. Recently, studies have shown the benefit of early, active, targeted therapeutic strategies. However, these are primarily prescribed from the specialty setting. Early access to concussion specialty care has been shown to improve recovery times for those at risk for persisting symptoms, but there are disparities in which youth are able to access such care. Mobile health (mHealth) technology has the potential to improve access to concussion specialists. This trial will evaluate the feasibility of a mHealth remote patient monitoring (RPM)-based care handoff model to facilitate access to specialty care, and the effectiveness of the handoff model in reducing the incidence of PPCS.Methods and analysis This study is a non-randomised type I, hybrid implementation-effectiveness trial. Youth with concussion ages 13–18 will be enrolled from the emergency department of a large paediatric healthcare network. Patients deemed a moderate-to-high risk for PPCS using the predicting and preventing postconcussive problems in paediatrics (5P) stratification tool will be registered for a web-based chat platform that uses RPM to collect information on symptoms and activity. Those patients with escalating or plateauing symptoms will be contacted for a specialty visit using data collected from RPM to guide management. The primary effectiveness outcome will be the incidence of PPCS, defined as at least three concussion-related symptoms above baseline at 28 days following injury. Secondary effectiveness outcomes will include the number of days until return to preinjury symptom score, clearance for full activity and return to school without accommodations. The primary implementation outcome will be fidelity, defined as the per cent of patients meeting specialty care referral criteria who are ultimately seen in concussion specialty care. Secondary implementation outcomes will include patient-defined and clinician-defined appropriateness and acceptability.Ethics and dissemination This study was approved by the Institutional Review Board of the Children’s Hospital of Philadelphia (IRB 22-019755). Study findings will be published in peer-reviewed journals and disseminated at national and international meetings.Trial registration number NCT05741411.

Introduction While research into adolescent mental health has developed a considerable understanding of environmental and psychosocial risk factors, equivalent biological evidence is lacking and is not representative of economic, social and ethnic diversity in the adolescent population. It is important to understand the possible barriers and facilitators to conduct this research. This will then allow us to improve our understanding of how biology interacts with environmental and psychosocial risk factors during adolescence. The objective of this scoping review is to identify and understand the needs, barriers and facilitators related to the collection of biological data in adolescent mental health research.Methods and analysis Reviewers will conduct a systematic search of PubMed, Medline, Scopus, Cochrane, ERIC, EMBASE, ProQuest, EBSCO Global Health electronic databases, relevant publications and reference lists to identify studies published in the English language at any time. This scoping review will identify published studies exploring mental health/psychopathology outcomes, with biological measures, in participants between the ages of 11 and 18 and examine the reported methodology used for data collection. Data will be summarised in tabular form with narrative synthesis and will use the methodology of Levac et al, supplemented by subsequent recommendations from the Joanna Briggs Institute Scoping Review Methodology.Ethics and dissemination Ethical approval is not required for this scoping review. The scoping review will be conducted with input from patient and public involvement, specifically including young people involved in our study (‘Co-producing a framework of guiding principles for Engaging representative and diverse cohorts of young peopLE in Biological ReseArch in menTal hEalth’—www.celebrateproject.co.uk) Youth Expert Working Group. Dissemination will include publication in peer-reviewed journals, academic presentations and on the project website.

The AUD2IT-algorithm is a tool to structure the data, which is collected during an emergency treatment. The goal is on the one hand to structure the documentation of the data and on the other hand to give a standardised data structure for the report during handover of an emergency patient. AUD2IT-algorithm was developed to provide residents a documentation aid, which helps to structure the medical reports without getting lost in unimportant details or forgetting important information. The sequence of anamnesis, clinical examination, considering a differential diagnosis, technical diagnostics, interpretation and therapy is rather an academic classification than a description of the real workflow. In a real setting, most of these steps take place simultaneously. Therefore, the application of the AUD2IT-algorithm should also be carried out according to the real processes. A big advantage of the AUD2IT-algorithm is that it can be used as a structure for the entire treatment process and also is entirely usable as a handover protocol within this process to make sure, that the existing state of knowledge is ensured at each point of a team-timeout. PR-E-(AUD2IT)-algorithm makes it possible to document a treatment process that, in principle, does not have to be limited to the field of emergency medicine. Also, in the outpatient treatment the PR-E-(AUD2IT)-algorithm could be used and further developed. One example could be the preparation and allocation of needed resources at the general practitioner. The algorithm is a standardised tool that can be used by healthcare professionals of any level of training. It gives the user a sense of security in their daily work.

Lipid disorders, primarily hypercholesterolemia, are the most common cardiovascular (CV) risk factor in Poland (this applies even 3/4 of people). The low-density lipoprotein cholesterol (LDL-C) serum level is the basic lipid parameter that should be measured to determine CV risk and determines the aim and target of lipid-lowering treatment (LLT). Lipid-lowering treatment improves cardiovascular prognosis and prolongs life in both primary and secondary cardiovascular prevention. Despite the availability of effective lipid-lowering drugs and solid data on their beneficial effects, the level of LDL-C control is highly insufficient. This is related, among other things, to physician inertia and patients’ fear of side effects. The development of lipidology has made drugs available with a good safety profile and enabling personalisation of therapy. Pitavastatin, the third most potent lipid-lowering statin, is characterised by a lower risk of muscle complications and new cases of diabetes due to its being metabolised differently. Thus, pitavastatin is a very good therapeutic option in patients at high risk of diabetes or with existing diabetes, and in patients at cardiovascular risk. This expert opinion paper attempts at recommendation on the place and possibility of using pitavastatin in the treatment of lipid disorders.

Abstract Uropathogenic Escherichia coli (UPEC) causes up to 90% of urinary tract infections (UTI) which is more prevalent among females than males. In urine, patients with symptomatic UTI usually have a high concentration of bacterial infection, ≥ 105 colony-forming units (CFU) per mL, in which the culture method is regularly the gold standard diagnosis. In this study, a simple and inexpensive distance-based paper device (dPAD) combined with the fluorescent closed tube LAMP assay was validated for simultaneously screening and semi-quantifying the infection level of E. coli in 440 urine samples of patients with UTI. The dPAD could measure the LAMP amplicons and semi-quantify the levels of E. coli infection in heavy (≥ 104 CFU/mL), light (≤ 103 CFU/mL) and no infection. The sensitivity and specificity had reliable performances, achieving as high as 100 and 92.7%, respectively. The one step LAMP assay could be performed within 3 h, which was 7.5 times faster than the culture method. To empower early UTI diagnosis and fast treatment, this inexpensive dPAD tool combined with the fluorescent closed tube LAMP assay is simple, reliably fast and practically portable for point-of-care settings, particularly in resource-limited areas, which can be set up in all levels of healthcare facilities.

Background: Some sputum smear microscopy protocols recommend placing filter paper over sputum smears during staining for Mycobacterium tuberculosis (TB). We found no published evidence assessing whether this is beneficial. We aimed to evaluate the effect of filter paper on sputum smear microscopy results. Methods: Sputum samples were collected from 30 patients with confirmed pulmonary TB and 4 healthy control participants. From each sputum sample, six smears (204 smears in total) were prepared for staining with Ziehl-Neelsen (ZN), auramine or viability staining with fluorescein diacetate (FDA). Half of the slides subjected to each staining protocol were randomly selected to have Whatman grade 3 filter paper placed over the dried smears prior to stain application and removed prior to stain washing. The counts of acid-fast bacilli (AFB) and precipitates per 100 high-power microscopy fields of view, and the proportion of smear that appeared to have been washed away were recorded. Statistical analysis used a linear regression model adjusted by staining technique with a random effects term to correct for between-sample variability. Results: The inclusion of filter paper in the staining protocol significantly decreased microscopy positivity independent of staining with ZN, auramine or FDA (p=0.01). Consistent with this finding, there were lower smear grades in slides stained using filter paper versus without (p=0.04), and filter paper use reduced AFB counts by 0.28 logarithms (95% confidence intervals, CI=0.018, 0.54, p=0.04) independent of staining technique. In all analyses, auramine was consistently more sensitive with higher AFB counts versus ZN (p=0.001), whereas FDA had lower sensitivity and lower AFB counts (p

How do author perceptions match up to the outcomes of the peer-review process and perceptions of others? In a top-tier computer science conference (NeurIPS 2021) with more than 23,000 submitting authors and 9,000 submitted papers, we surveyed the authors on three questions: (i) their predicted probability of acceptance for each of their papers, (ii) their perceived ranking of their own papers based on scientific contribution, and (iii) the change in their perception about their own papers after seeing the reviews. The salient results are: (1) Authors had roughly a three-fold overestimate of the acceptance probability of their papers: The median prediction was 70% for an approximately 25% acceptance rate. (2) Female authors exhibited a marginally higher (statistically significant) miscalibration than male authors; predictions of authors invited to serve as meta-reviewers or reviewers were similarly calibrated, but better than authors who were not invited to review. (3) Authors' relative ranking of scientific contribution of two submissions they made generally agreed with their predicted acceptance probabilities (93% agreement), but there was a notable 7% responses where authors predicted a worse outcome for their better paper. (4) The author-provided rankings disagreed with the peer-review decisions about a third of the time; when co-authors ranked their jointly authored papers, co-authors disagreed at a similar rate-about a third of the time. (5) At least 30% of respondents of both accepted and rejected papers said that their perception of their own paper improved after the review process. The stakeholders in peer review should take these findings into account in setting their expectations from peer review.