Search

Industrial production and domestic discharge produce a large amount of oily wastewater, which seriously affects the stability of the ecological environment. Membrane separation technology provides another path to treating oily wastewater. And appropriate surface modification of the membrane helps to achieve high efficiency of treating oily wastewater. With green, economy and stability been more concerned. The focal research reports a completely biodegradable all cellulose composite filter paper (ACCFP) composed of I-cellulose macrofibers and II-cellulose matrix. It is a simple one-step impregnation method to adjust the surface microstructure of the pristine filter paper (PFP), and it does not involve with chemical reaction. The pre-wetted ACCFP consist of II-cellulose hydrogel and I-cellulose reinforcement in the process of oil-water separation. This layer of hydrogel is the fundamental to underwater superoleophobicity, which determines their eligibility for applications of efficient oil-water mixture or oil-in-water (oil/water) emulsion separation. The separation efficiency of oil-water mixture and oil/water emulsion exceed 95% and 99.9%, respectively. In addition, excellent mechanical properties of ACCFP in dry and wet conditions ensure its stability in service and prolong service life in applications. The focal study provides a new method for high-performance oil-water separation and it is more in line with sustainable chemistry.

In this research, I established an energy benchmark for the pulp and paper industry of Vietnam. I, therefore, focus on three major paper product families, including packaging paper, printing and writing paper, and tissue paper. In this research, I use specific energy consumption (SEC) as the energy performance indicator (EnPI) for computing energy benchmarks for the main sub-sectors in the pulp and paper industry of Vietnam. The factories in the pulp and paper industry of Vietnam are divided into three production scales, and the energy benchmarks are specified by production scales. Energy surveys and energy audits have been used to calculate energy benchmarks. Here, I establish the energy benchmark for the main sub-sectors in the pulp and paper industry of Vietnam according to the three production scales. I also estimate the energy saving potential for the pulp and paper industry of Vietnam based on surveying and auditing results.

Low-cost, flexible and safe battery technology is the key to the widespread usage of wearable electronics, among which the aqueous Al ion battery with water-in-salt electrolyte is a promising candidate. In this work, a flexible aqueous Al ion battery is developed using cellulose paper as substrate. The water-in-salt electrolyte is stored inside the paper, while the electrodes are either printed or attached on the paper surface, leading to a lightweight and thin-film battery prototype. Currently, this battery can tolerate a charge and discharge rate as high as 4 A g−1 without losing its storage capacity. The charge voltage is around 2.2 V, while the discharge plateau of 1.6–1.8 V is among the highest in reported aqueous Al ion batteries, together with a high discharge specific capacity of ∼140 mAh g−1. However, due to the water electrolysis side reaction, the faradaic efficiency can only reach 85% with a cycle life of 250 due to the dry out of electrolyte. Benefited from using flexible materials and aqueous electrolyte, this paper-based Al ion battery can tolerate various deformations such as bending, rolling and even puncturing without losing its performance. When two single cells are connected in series, the battery pack can provide a charge voltage of 4.3 V and a discharge plateau as high as 3–3.6 V, which are very close to commercial Li ion batteries. Such a cheap, flexible and safe battery technology may be widely applied in low-cost and large-quantity applications, such as RFID tags, smart packages and wearable biosensors in the future.

The increased demand for energy due to industrialisation and a steadily growing population has placed greater strain on the development of eco-friendly energy storage devices in recent years. Current methods with high efficiency are limited by high costs and waste. As a result, greater importance has been placed on the development of low-cost, lightweight, flexible, and biodegradable energy storage systems developed from paper and paper-like substrates. This study reviews recent advances in paper-based battery and supercapacitor research, with a focus on materials used to improve their electrochemical performance. Special mention is made of energy-storage configurations ranging from metal-air and metal-ion batteries to supercapacitors. Furthermore, methods of fabrication, functional materials, and efficiency are reviewed to offer prospects for future research into the field of paper-based Na-ion batteries. The review provides an updated discussion of recent research conducted in the field of paper-based energy systems published over the last five years and highlights the challenges for their commercial integration prospects.

Energy viability and waste disposal have been the two significant global complication. The consumption of paper and, subsequently, recycling are increasingly growing, contributing to vast quantities of paper sludge. Therefore, in waste disposal and environmental remediation, coping with massive volumes of paper sludge has received tremendous attention worldwide. Our purpose was to assess leading study advancements globally of paper sludge based on articles published, authors intra/inter-collaborations and accumulations of keywords. Throughout entire 1967–2019 duration, 2096 publications in paper sludge topic were mined using Scopus database. The findings revealed that the number of publications was less than 30 between 1967 and 1995, less than 60 between 1996 and 2005, less than 90 between 2006 and 2010 and more than 90 between 2011 and the recent year. Consequently, the yearly publishing is forecast to keep to expand. In a total of 125 journals, a total of 217 Canadian scholars from 155 universities lead to 263 papers, comprising 10.8 % total publications, where 261 (99.2 %) of 263 total English-language publications dominate the other countries/territories, while 0.8 % in French language. Also, from each of the 15 top countries, among the most productive universities, Université Laval was ranked 251st in World University Rankings 2021. In review, the following present developments in paper sludge comprise of: (i) cement, cellulose, bioethanol/biogas and concrete; (ii) phytoremediation and vermicompost and (iii) modelling (e.g., response surface methodology).

The pulp and paper industry (PPI) has several opportunities to contribute to meeting prevailing climate targets. It can cut its own CO2 emissions, which currently account for 2% of global industrial fossil CO2 emissions, and it has an opportunity to produce renewable energy, fuels, and materials for other sectors. The purpose of this study is to improve understanding of the decarbonization prospects of the PPI. The study provides insights on the magnitude of needed annual renewal rates for several possible net-zero target years of industrial fossil CO2 emissions in the PPI and discusses decarbonization opportunities, namely, energy and material efficiency improvement, fuel switching, electrification, renewable energy production, carbon capture, and new products. The effects of climate policies on the decarbonization opportunities are critically evaluated to provide an overview of the current and future business environment of the European PPI. The focus is on Europe, but other regions are analyzed briefly to widen the view. The analysis shows that there are no major technical barriers to the fossil-free operation of the PPI, but the sector renovates slowly, and many new opportunities are not implemented on a large scale due to immature technology, poor economic feasibility, or unclear political environment. [ABSTRACT FROM AUTHOR]

Climate change as a matter had little attention of public debate, especially in developing countries, until the recent floods caused by the dragon storms in the Middle East and the forest fires in the Mediterranean. Egypt, being strategically crucial in Africa, the Mediterranean, and the Arab world, with strong connections to other countries, aimed to go from promises to action and to discover real answers to climate change by building on past COPs. The administration assumed a more prominent role by coordinating the 27th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP27). People started to realize that this is not something only happening elsewhere in the world. Egypt took the initiative; Challenges have been assessed to reach suitable mitigation approaches, and Egypt's first NDC has been issued to meet the global agenda. Egypt's vision was to accelerate global climate action at the UNFCCC 27th Conference of the Parties (COP 27) through emissions reduction, advanced adaptation, and enhanced flow of appropriate finance, prioritizing developing countries worldwide.

The insulation of an oil-filled transformer is based on materials of organic origin - oil and wood pulp. The state of insulation is a key factor in the reliable operation of a power equipment, and much attention is paid to the insulation state assessment by researchers. To assess the cellulose insulation state, indicators such as the degree of polymerization and paper moisture are deter-mined. The existing methods for determining the moisture content and the degree of polymeriza-tion of a paper insulation have disadvantages, as they require a complex process of sampling the insulation, which is a time-consuming operation. The purpose of the work is to develop new methods for determining the moisture content and the degree of polymerization of the paper in-sulation of a power transformer. This goal is achieved by obtaining the reflection spectra of the paper insulation samples and constructing two correlation lines to determine the degree of polymerization and humidity. The most significant result of the article is the establishment of the dependence of the reflection coefficient of the paper on the concentration of water exceeding 4% and the position of the minimum in the reflection spectrum of paper insulation on the degree of polymerization. The significance of the obtained results lies in the fact that the optical method for determining the moisture content and the degree of polymerization of paper insulation using the constructed correlation lines is highly accurate and does not require the use of additional re-agents and complex calculations.

Paper sludge is the water treatment waste, which produced during paper production. Paper sludge (PS) waste utilization is the common problem in the EU and internationally. According to the waste management directive No. 2008/98/EC, paper sludge waste should not be utilized in landfills. In the European Union, alone 93 million tons of PS generated yearly. Nowadays most of the paper sludge waste used as fuel for incineration power plants (up to 55 %). According to waste management legislation such waste management should be avoided as well. Very small portion (10 %) of PS is used in construction sector. In construction, paper sludge used as additive in concrete composite materials. Such legislation of waste management generates the motivation of this study. In this study authors propose to produce composite panels in which PS is the main material of composite. As the binding material, clay proposed due to its good binding properties and therefore its natural material. Such produced panels proposed to use it for sound absorption applications. To determine composites sound absorption coefficient standard ISO 10534-2 method was used. The sound absorption coefficient in different octave bands reached up to 0.59.

Abstract Nickel nanoparticles supported by commercial carbon paper (CP) are prepared by pulsed laser deposition with deposition time of 3, 6, and 12 min as a catalyst for urea electro-oxidation. The surface conditions and the morphologies of the prepared electrodes have been characterized by Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Urea electro-oxidation reaction in KOH solution on the Ni/CP electrodes is investigated by cyclic voltammetry and chronoamperometry. The results show that the electrode with less Ni nanoparticle agglomeration shows higher peak current density, which was achieved in the 3 min deposition samples when normalized by electroactive surface areas. However, the highest current normalized by the area of the carbon paper was achieved in the 6 min deposition sample due to the larger quantity of Ni nanoparticles. All the samples show good stability. Our results suggest that the low density, low cost, and environmental friendly CP can be used as support for Ni nanoparticle as a catalyst for urea electro-oxidation. It thus has great potential for many applications involving urea oxidation, such as wastewater treatments.

Paper waste is a raw material for a lot of products with different added value. The engineering, economic and environmental aspects of paper waste recycling are analysed for production of composite material, cellulose nanofibers and nanocrystals, bricks with paper components, porous carbon, film of biopolymer, enzymatic sugar and bioenergy: bioethanol, hydrogen and biofuel. Through multicriteria analysis, it was possible to determine the most feasible paper waste recycling product in case of four product groups: egg packaging boxes, cardboard, reused paper, cellulose nanomaterials (nanofibers and nanocrystals). The production of cellulose nanofibres and cellulose nanocrystals has an advantage over egg packaging and cardboard production as well as reusable paper.

In the present study, Ti3C2Tx type MXene was prepared by selective etching of Al from Ti3AlC2 with mesh size of 200. The powder form of raw material was used to fabricate Ti3C2Tx by in-situ HF etching method. The MXene is further coated on non-woven paper by simply dip coating method. The detailed structural, morphology and elemental content study of as prepared Ti3C2Tx MXene have demonstrated. The MXene (Ti3AlC2) powders show compact, layered morphology as expected for bulk layered ternary carbide. The detailed elemental analysis has carried out for Titanium carbide based MXene coated and uncoated woven paper. The lower conducting property obtained for paper coating due less amount of coating in the surface of paper instead of coating on glass substrate. The electrical property characterization of MXene coated non-woven paper and glass substrate have also been studied. Hence, the conductive coating of MXene-in water formulation achieved through simple dip coating methods is promising for low cost sensor, wearable shielding device fabrication towards renewable energy and healthcare applications. [ABSTRACT FROM AUTHOR]

Valorisation involves conversion of toxic compounds into value added products. The present study has tried to evaluate the potential of vermicomposting in management of different types of toxic paper mill wastes such as primary waste (VCP) and secondary waste (VCS) using Eisenia fetida for 60 days. The procedure was performed using sundried samples of paper mill wastes, cow dung and straw in different trial sets using different ratios. The study had revealed that the trial sets (VCP1 and VCS1) using ratio of paper mill waste: Cow dung: Straw (5:4:1) were effective in maintaining physiochemical parameters and different population attributes of earthworm. The present study had also demonstrated the enzymatic enrichment of vermicompost in terms of 19 enzymes such as α-Glucosidase, lipase, leucine aminopeptidase etc. in maintenance of C/N ratio of the compost. A significant reduction of heavy metals were noticed in vermicomposting of primary waste (VCP1) as Zn (40%) ​> ​Pb (36%) ​> ​Cr (28%) ​> ​Cu (25%) and secondary waste (VCS1) as Zn (44%) ​> ​Pb (41%) ​> ​Cu (19%) ​> ​Cr (13%). Such reduction of heavy metal was highly correlated with the reduction of C/N ratio of the vermicompost. The process of bioremediation was further manifested through the regular monitoring of bioaccumulation factor (BAF) among earthworm population in vermicomposting of primary waste (VCP1) as Zn (0.40) ​> ​Cu (0.23) ​> ​Cr (0.18) ​> ​Pb (0.11) and secondary waste (VCS1) as Zn (0.47) ​> ​Cu (0.25) ​> ​Cr (0.21) ​> ​Pb (0.14). Therefore, the study concludes that the ratio of paper mill waste, cow dung and straw (5:4:1) can be an efficient formulation in qualitative enrichment of different toxic organic paper mill wastes through vermicomposting.

Green production of functional nano-oxides on a large scale is crucial for the modern manufacturing industries. Traditional hydrothermal methods and ball milling are usually time-consuming and require long-term energy input with undesired by-products. Herein, an ultrafast laser-induced high-pressure photochemistry manufacturing technique is developed to massively produce planar-aligned graphene-coated two-dimensional (2D) SnO2 nanoplatelet on carbon nanotube (CNT) paper under the green chemistry guidelines. The unique design of Z-axis confinement added to the ultrafast laser irradiation provides an exceptional high temperature of 1772 K and a high pressure of 24 GPa in the localized laser plasma plume. This transient nonequilibrium condition controls the formation of 2D SnO2, and the ablated C atoms cool down afterward as in-situ “glue” to intactly seal the oxides on the CNT substrate. The resultant hierarchical Graphene@2D SnO2@CNT paper anode for Li-ion battery has an outstanding capacity of 819 mAh g−1 (1637 mAh cm−3) at 0.5 A g−1 and retains 622 mAh g−1 (1245 mAh cm−3) at 5.0 A g−1. The high capacity at 0.5 A g−1 has a retention of 92% after 600 cycles. This work provides an environmental-friendly scalable manufacturing technique to produce functional nanocomposites in 1 step.

Abstract Herein, a fully paper‐based all‐solid‐state supercapacitor with functionalized cellulose paper as electrodes, carboxymethyl cellulose gel as solid electrolyte and cellulose paper as separator was fabricated. The electrode was fabricated by a conventional papermaking process with silver‐modified fibers and graphene oxide (GO)‐modified fibers followed by reduction of GO. The Ag‐modified fibers and GO‐modified fibers were obtained by in situ growth of Ag nanoparticles and self‐assembly of GO sheets on cellulose fibers, respectively. Ag‐modified fibers act as a flexible current collector with rich three‐dimensional interconnected electron transport pathways to make the reduced GO‐modified fibers as electrode materials to achieve high conductivity (1.93 Ω sq−1) and high‐rate capability. Simple drying can reduce 40% weight of the supercapacitor to facilitate transportation and storage, and its capacitance efficiency can be recovered by wetting when needed. This work opens up a new way of developing cheap, green and high performance full‐paper flexible electronics by conventional papermaking process.

Abstract Freestanding films with high strength and conductivity are critical for flexible electronics, such as supercapacitors. Herein, inspired from the natural leaf, a freestanding paper is constructed through fast vacuum filtration by “mesophylls‐like” MXene (Ti3C2TX) nanosheets and “vein‐like” cellulose filaments and silver nanowires (Ag NWs). The produced nanocomposite paper with 25 wt% Ti3C2TX and 8 wt% Ag NWs (PMxAg25‐8) exhibits high conductivity (58 843 S m−1) and excellent mechanical properties (Tensile strength of 34 MPa and Young's modulus of 6 GPa), which arises from the synergistic effects of the interactions between cellulose and MXene and the three‐dimensional interpenetrating frameworks. This interpenetrating framework can further benefit the electrochemical performance of the nanocomposite papers and the foldable paper electrode presents a high capacitance of 505 F g−1 with only 25 wt% MXene. This work paves the way for the fast fabrication of strong and multifunctional MXene macro‐assembly for flexible electronics by conventional papermaking process.

Paper and pulp manufacturing industry produces versatile products from renewable feedstock that are easily recycled. It is the fourth largest industrial sector in terms of energy use. Much of the energy used comes from biomass derived fuels or high efficiency combined heat and power plants so the industry is not considered as carbon intensive. But at production paper making emits five times the CO2/tonne of steel; this is gradually removed from the atmosphere by the growth of replacement trees which can take between 7 and 90 years. This study reviewed existing literature to establish estimates for future energy requirements, and way that these could be met with minimum carbon emissions in a world where there are electricity grids with low carbon intensities, high recycling rates and growing demand for sustainable biomass. It was found that energy consumption could be reduced by 20% using technologies that have been demonstrated at an industrial scale. Most virgin pulp is made using the kraft chemical processing method. It was found that it should be possible to eliminate all fossil fuel use from this process, by combustion of by-product while exporting a small amount of electricity. Recycled paper is becoming the largest source of pulp. In this case the waste streams cannot provide sufficient energy to power the process, but process heat can be produced by burning some of the collected waste paper in steam plants or by using electric heat pumps. The energy needed to produce high quality office paper is nearly twice that required for non-deinked packaging paper. This couples with the lower pulp yields obtained with high quality pulp means that the environmentally preferred option for energy supply to the recycling process is dependent on the grade of pulp being produced.

Environmentally friendly and energy saving treatment of black liquor (BL), a massively produced waste in Kraft papermaking process, still remains a big challenge. Here, by adopting a NiCaOCa12Al14O33 bifunctional catalyst derived from hydrotalcite-like materials, we demonstrate the feasibility of producing high-purity H2 (∼96%) with 0.9 mol H2 mol−1 C yield via the sorption enhanced steam reforming (SESR) of BL. The SESRBL performance in terms of H2 production maintained stable for 5 cycles, but declined from the 6th cycle. XRD, Raman spectroscopy, elemental analysis and energy dispersive techniques were employed to rationalize the deactivation of the catalyst. It was revealed that gradual sintering and agglomeration of Ni and CaO and associated coking played important roles in catalyst deactivation and performance degradation of SESRBL, while deposition of Na and K from the BL might also be responsible for the declined performance. On the other hand, it was demonstrated that the SESRBL process could effectively reduce the emission of sulfur species by storing it as CaSO3. Our results highlight a promising alternative for BL treatment and H2 production, thereby being beneficial for pollution control and environment governance in the context of mitigation of climate change.

Synthetic styrene-butadiene (SB) and styrene-acrylic (SA) latex binders used in paper coating formulations are common and based on unsustainable petroleum sources. Today's papermaking industry turns towards sustainable substitutes that do not compromise quality, and reduce carbon emission, toxic substance release and waste disposal concerns related to fossil fuel sources. In this study, colloidal starch-based latex nanoparticles that do not require cooking were used for pigment coating and coated on the paper surfaces. The effects of these new biobased binders on the structural and mechanical strength properties, liquid absorption, wetting and surface topography of the paper were investigated and compared with the properties of coated paper that SB latex was used as a coating binder. The results demonstrated that the biobased latex decreases the grammage of paper while maintaining an identical thickness relative to the SB latex samples. The porosity, permeability and roughness of biobased latex are found higher than the SB latex. The biobased latex successfully replaced SB latex at 1:1 ratio and enabled an equivalent of bursting, tear, tensile strength and structural properties.

Briquetted biomass, like sugarcane bagasse, a by-product of sugar mills, is a renewable energy source. This study aimed at the production and characterization of bagasse briquettes. The production of briquettes was carried out with different blending ratios (5, 10, and 15%) and average particle sizes (0.75, 2.775, and 4.8 mm) with various binders of cow dung, waste paper, and admixture (molasses and wastepaper). The bagasse underwent drying, size reduction, sieving, binder addition, and densification using a manual press during the briquetting process. Characterization of the physical and combustion parameters of briquettes, such as density, shatter resistance, proximate, and calorific value, followed the American Society for Testing and Materials procedures. The result shows that the maximum density of briquettes was 0.804 g/cm3, while shatter resistance varied from 83.051 to 94.975% (4.8mm, 5% cow dung and 0.75mm, 5% admixture binders respectively). ANOVA analysis showed that the factors and their interactions had a significant influence (p value < 0.05) on the physical properties. The optimum parameters of briquettes achieved were 14.953% admixture binder, 0.776 mm particle size, 0.805 g/cm3 density, and 95.811% shatter resistance. Bagasse briquettes with a 5% cow dung binder achieved a high calorific value of 39927.05 kcal/kg. The ultimate analysis revealed a composition of 47.49% carbon (C), 5.133% hydrogen (H), 1.557% nitrogen (N), 0.374% sulfur (S), and 45.446% oxygen (O). Therefore, bagasse has a high calorific value and can be used for briquetting to replace fossil fuel and firewood in different applications. In addition, due to its availability, utilizing as fuel source has economic advantage. [ABSTRACT FROM AUTHOR]

Since dockless bicycle-sharing systems (DBSS) first arose in China in 2016, studies have examined their governance. However, there has been no comprehensive review of the literature on DBSS. This paper presents the first systematic review of the burgeoning literature on the governance of DBSS. It maps key research themes, identifies research trends and provides a deeper understanding of the governance literature on DBSS. We searched the Web of Science (WoS), Scopus and China National Knowledge Infrastructure (CNKI) databases to identify 95 papers written in English or Chinese between 2016 and 2019 that address the governance of DBSS. A thematic coding of these papers was supported by bibliometric analysis and knowledge mapping using the VOSviewer. More papers are written in Chinese rather than English, focusing on Chinese cities. Although the time range of our literature search was between 2016 and 2019, the first paper was published in 2017. Four key themes in the governance of DBSSs were identified within the papers, and over time the papers shifted their focus from problem-finding and problem-defining to problem-solving. Discussion of the inherent characteristics of the sharing economy and the externalities underpinning the governance of DBSS (Theme 1) and rebalancing problems for DBSS (Theme 2) first arose in early 2017, whilst discussions of the government regulation of DBSS (Themes 3) and the cross-boundary governance models underpinning DBSS (Themes 4) first arose in mid-2017. This paper concludes with a discussion of the identified themes and trends in the context of the broader literature on bicycle sharing and identifies opportunities for further research.

Wastewater discharged from pulp and paper mills play a major role in environmental pollution and have significant effects on aquatic and terrestrial components. The main focus of this work is to study the potential laccase producing bacterium Bacillus cereus AKRC03 (accession no. MN720581.1) for the biodegradation and toxicity reduction from pulp paper mill wastewater. The isolated strain of Bacillus cereus AKRC03 exhibited up to 78.67% of decolorization and degradation capability for hazardous residual organic pollutants at different nutritional (glucose: 1.0%, peptone: 0.5%) and environmental conditions (pH: 7.0, temperature: 37 °C, agitation: 180 rpm, incubation period: 120 h). The absorption peak of the UV–Vis spectral scan identified the decolorization and degradation pattern for pollutants present in wastewater during treatment. Furthermore, the transformation of major pollutants was exhibited through GC-MS analysis. These were 1-dotriacontanol, 1-heptadecanol, tricosane, 1-(2-hydroxyethoxy) tridecane, and n-[(methylphenyl) methylene]-2-methyl-2-propanamine n-oxide. While silane, (dodecyloxy)trimethyl, (1á,3á,4à)-3,4-bis[dimethyl(4-methylphenyl)silyl]cyclo pentan-1-yl acetate, (2S,3R)-(3-tetradecyloxiranyl)methanol, hexadecanoic acid, 2,3-bis[(trimethylsilyl)oxy]propyl ester, and 2,4,6-tri[4,5-(methylenedioxy)phenyl]-s-triazine appeared as metabolic product after degradation of wastewater. The reduction of toxicity was measured up to 70% for treated wastewater with Phaseolus mungo L seeds and Tubifex tubifex worms. From these findings, it is concluded that the isolated bacterium may be used in the bioaugmentation process for the further detoxification and degradation of discharged pulp paper mill wastewater for environmental safety.

The economic feasibility of retrofitting an amine based post-combustion CO 2 capture process to an existing Kraft pulp mill and an existing integrated pulp and board mill has been assessed. This study builds on the technical assessment of the energy performance of the mills when retrofitting a post-combustion CO 2 capture process by Onarheim et al. (2017). Between 75 to 100% of the CO 2 emissions from the pulp and paper industry originate from the combustion of biomass. If the raw material is sourced sustainably, these emissions are categorized as carbon neutral. Applying sustainably managed biomass in the pulp and paper processes and capturing the resulting CO 2 for permanent storage enables the industry to go carbon negative. In this study, the economic impact of retrofitting CO 2 capture from the flue gases of the recovery boiler, the multi-fuel boiler and the lime kiln were assessed. The levelized cost of pulp and the cost of CO 2 avoided were evaluated based on six different scenarios varying the CO 2 tax, incentives for renewable electricity production, with and without recognizing biogenic CO 2 emissions as neutral (exempting CO 2 emissions from tax or not), and rewarding captured and permanently stored CO 2 with negative emissions credit. Results show that the pulp and paper industry has a potential for realizing feasible implementation of large-scale industrial Bio-CCS. For cases where 60–90% of total site CO 2 emissions are captured, the cost of avoided CO 2 amounts to 52–66 €/t for the Kraft pulp mill and 71–89 €/t for the integrated pulp and board mill. The cost of avoided CO 2 , and thus the realization of Bio-CCS in the pulp and paper industry, is strongly dependent on prevailing policy frameworks such as the EU ETS. In order to reach a levelized cost of pulp similar to the reference mill without CO 2 capture, a negative CO 2 emission credit of 60–70 €/t CO 2 for the Kraft pulp mill and 70–80 €/t CO 2 for the integrated pulp and board mill will be required. As long as biogenic CO 2 emissions that are captured and permanently stored are not recognized as negative and rewarded accordingly there is no economic incentive for the owners of pulp and paper mills to implement CCS. The only way to get the pulp and paper industry to implement and deploy Bio-CCS will need the support of the decision-makers in promoting the right policy framework and regulations to encourage the investment such as strong incentives for negative emissions which are bankable during the long term operation of the mills. [ABSTRACT FROM AUTHOR]

Soil microbial fuel cells (SMFCs) are attractive for low-cost bioelectricity generation. In this study, a multiwalled carbon nanotube paper (MCNTP) was fabricated by a simple method for use as the anode and cathode electrodes in a stab-type membrane-less SMFC (SSMFC). Activated carbon powder, carbon fibers, and cellulose fibers were bound by multiwalled carbon nanotube paint to form the MCNTP. As a result, the MCNTP exhibited high conductivity, flexibility, and durability. In addition, the SSMFC was designed as a module mounted with three anodes in series and a floating air cathode. The SSMFC could be activated on demand by simply stabbing in the wet soil. Experimental results showed that the floating cathode outperformed the non-floating one. The SSMFC generated the output shortly after being plugged into the wet soil. The maximum power density was at the level of 60–70 mW/m2 for three separate experiment cycles. Additionally, a single SSMFC was used to power a clock as an example to demonstrate its practical use. [ABSTRACT FROM AUTHOR]

Black liquor (spent cooking liquor) is one of the major byproducts of pulp and paper manufacturing. Black liquor contains 10–50% lignin, which is the main organic matter found within that liquor. Different types of black liquors are obtained as per the type of feedstock, pulping process and cooking method adopted by industries. In recent years, industries have been required to accommodate newer varieties of feedstock such as non-wood and recycled fibers during the delignification process, which can save plenty of trees and hence reduce their carbon footprint. Therefore, the newer black liquors being generated differ in their physical characteristics, chemical composition, and energy content from that of traditional processes.Currently, black liquor is seen as a platform for the production of many renewable materials for industrial applications that can be environmentally friendly with the potential to be used substitute for fuel and commercial materials. However, most of the published review articles focus on the kraft spent liquor and its derived kraft lignin that is obtained from kraft pulping process at the pulp and paper as a source of bio-fuel and biomaterials. Meanwhile, several other black liquors such as soda, and neutral sulfite spent (NSSC) liquor and their derived lignin are not highlighted as sources of biofuel and biomaterials. Therefore, this review highlights all the types of black liquors including soda, and neutral sulfite spent (NSSC) liquor in terms of their sources, physical and chemical characterization, purification processes, and the potential applications of black liquor and its derived lignin.

Abstract In this study, three-type paper supercapacitors based on the polyvinylidene fluoride (PVDF) and polyvinyl alcohol (PVA)/phosphoric acid (H3PO4) gel electrolytes and graphite nanoparticles (GNPs) electrodes have been fabricated. The gel electrolytes and electrodes films have been coated on the paper using push coating and then characterized by scanning electron microscopy (SEM). In two types of the paper supercapacitors, on the PVDF gel electrolyte film, a layer of PVA/water and BaTiO3 as a gel separator film has been coated. The specific capacitance of the paper supercapacitors using cyclic voltammetry (CV) and galvanostatic (charge–discharge) methods at the scan rates 20 and 150 mV s−1 have been investigated. The paper supercapacitor based on the BaTiO3 separator film showed higher specific capacitance (312 F g−1) compared to other samples. Also, using electrochemical impedance spectroscopy (EIS), the Nyquist and Bode curves of paper supercapacitors have been measured. For the paper supercapacitors based on the PVDF gel electrolyte film and BaTiO3 separator film using the Nyquist curves, the equivalent series resistance (ESR) was 306 Ω and 125 Ω, respectively. The paper supercapacitor based on BaTiO3 gel separator structure represents a new type of flexible supercapacitor with high performance that can be applied to electronic devices.

The effectiveness of ClO2 bleaching as a replacement for conventional Cl2 bleaching, which is intensively practiced in developing countries, to reduce polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in non-wood pulp and paper mills has not been field tested. The first field study was performed to investigate PCDD/F variations when ClO2 bleaching was used as a substitute for conventional Cl2 bleaching in a non-wood pulp and paper mill. It was found that the PCDD/F toxic equivalents (TEQs) in solid and effluent samples were approximately 1.3–14.9 times lower when ClO2 bleaching was used instead of the conventional Cl2 bleaching. 2,3,7,8-Substituted tetrachlorinated dibenzofurans (2,3,7,8-TCDF) were the dominant contributors to total PCDD/F TEQs in samples from the investigated mill when using conventional Cl2 bleaching. The formation amounts of 2,3,7,8-TCDF were reduced from 1.56–2.76 pg TEQ/g to 0.02–0.32 pg TEQ/g in solid samples when ClO2 bleaching was used instead of the conventional Cl2 bleaching. The replacement of Cl2 with ClO2 might decrease the chlorination reactions of dibenzofuran as potential precursors, and thus reduce the formation amounts of 2,3,7,8-TCDF. The results could provide important knowledge for suggesting the best available technique for PCDD/F reduction for non-wood pulp and paper mills in developing countries. Keywords: PCDD/Fs, Pulp and paper mill, ClO2 bleaching, Cl2 bleaching, Persistent organic pollutants

Increasing levels of variable renewable energy require additional flexible resources in the global energy system. In countries with energy-intensive industries, flexibility may be increased through industrial demand side management (IDSM). In most studies, the potential of IDSM is estimated from a technical or theoretical viewpoint. However, IDSM capacity is only utilized if the industry finds it profitable, and thus the economic potential should also be assessed. The focus of this paper is on the intra-day IDSM potential of a paper mill site that is active in the Nordic power market. An optimization model is built to estimate the costs that occur when the paper mill executes regulating power bids, if the original production schedule has been optimized against a spot price forecast. The costs are estimated for different sizes of bids and a marginal cost curve is provided for pricing them. Using this marginal cost curve, the market potential of the case mill site is assessed. It is found that this potential is greatly influenced by the costs of executing regulating power bids. The results indicate that transmission system operators and policy makers should account for economic factors when assessing the potential of market based IDSM. [ABSTRACT FROM AUTHOR]

This paper investigates carbon and energy mix risk in the equity prices of EU-Taxonomy orientated and renewable European electric utility companies. We calculate carbon intensity and energy mix factors to measure possible carbon and energy mix premia while investigating the performance of portfolios of EU-Taxonomy orientated and renewable European electric utilities. We use a unique dataset to extend the three-factor model presented by Fama and French (1993) and find evidence of a positive renewable energy mix premium for portfolios of EU-Taxonomy orientated firms and firms with a high level of renewable energy in the energy mix. A positive low-carbon premium is also found for these same portfolios. Lastly, based on the three-factor model, an EU-Taxonomy orientated portfolio outperforms both a non-orientated portfolio and a non-reporting portfolio while a renewable energy portfolio outperforms a conventional energy portfolio. Our results are important for regulators, investors and European electric utilities in assessing the impact environmental regulations have on a firm's cost of capital. [ABSTRACT FROM AUTHOR]

Aqueous zinc (Zn) batteries with Zn metal anodes are promising clean energy storage devices with intrinsic safety and low cost. However, Zn dendrite growth severely restricts the use of Zn anodes. To effectively suppress Zn dendrite growth, we propose a bilayer separator consisting of commercial butter paper and glass fiber membrane. The dense cellulose-based butter paper (BP) with low zincophilicity and high mechanical properties prevents the pore-filling behavior of deposited Zn and related separator piercing, effectively suppressing the Zn dendrite growth. As a result, the bilayer separators endow the Zn||Zn symmetrical batteries with a superlong cycling life of Zn anodes (over 5000 h) at 0.5 mA cm−2 and the full batteries enhanced capacity retention, demonstrating the advancement of the bilayer separator to afford excellent cyclability of aqueous metal batteries.

The EU has set the ambitious target of raising the share of EU energy consumption produced from renewable resources to 32% by 2030, with a target of climate neutrality by 2050. The aim of this paper is to assess the role of biomass usage in the context of these targets. The paper identifies the progress made between 2013 and 2022 by focusing on a selection of EU countries. The largest bioenergy increments of 130, 77, and 60 PJ were reported for Poland, Sweden, and the Netherlands. This study evaluates the crucial role of co-generation and heat in EU regions, with biomass usage between 55 and 80% of the combined heat and power (CHP) energy in Nordic countries. The future perspectives for bioenergy based on EU policies, biomass resources, and technical issues were addressed. The EU possesses around 9% of the global biomass supply, ensuring a certain level of biomass resource dependence. Thus, the biomass usage demand in energy production, non-energy sectors, and transport is expected to rise, leading to increments of 13–76% on biomass imports. It appears that bioenergy development is mostly limited by economic issues and uneven support for bioenergy in different EU countries as well as environmental issues. The study shows a promising and sustainable potential of bioenergy in the EU as a renewable energy source while minimizing negative impacts on the environment and the economy. By 2050, liquid biofuels are likely to be increasingly used in the transport sector. Non-energy sector usage of biomass is still in an early stage of development, except for the pulp and paper industry, and significant use of biomass in non-energy sectors seems unlikely in the near future. [ABSTRACT FROM AUTHOR]

Anaerobic digestion is a well-established biological process for converting biomass in waste streams into a renewable energy source, and it also contributes to the treatment of these waste streams. In this introductory mini-review, some fundamental aspects of anaerobic digestion for use in the pulp and paper industry and other sectors are briefly summarized. The contents include the basics of anaerobic digestion, feedstocks, key process parameters, and typical anaerobic digesters/reactors and their representative manufactures. Fostering the more efficient and widespread commercial use of anaerobic digestion technologies would be a critical strategy to address the issues of energy, the environment, and sustainability. [ABSTRACT FROM AUTHOR]

The high‐efficiency conversion of water drop mechanical energy into electrical energy has always been an urgent issue in the development and utilization of raindrop energy. In this work, a novel drum‐like triboelectric nanogenerator (D‐TENG) with robust self‐cleaning superhydrophobic features is developed to harvest water drop energy. An elastic superhydrophobic cellulose paper is created by spray‐coating nanofumed silica dispersed in a thermoplastic elastomer solution, followed by treatment with triethoxy‐1H,1H,2H,2H‐tridecafluoro‐n‐octylsilane. When raindrops hit the D‐TENG surface, the superhydrophobic cellulose paper will vibrate and periodic contact and separation with polytetrafluoroethylene will occur to generate electricity. The results demonstrate that when a 6 mm water drop falls from a height of 2.5 m and hits the D‐TENG, the generated voltage output can reach a peak of 21.6 V and charge transfer of 10 nC. The output power of the D‐TENG can reach 16 µW per droplet, which is more than 13.3 times that generated from the previous TENGs based on the electrostatic induction of water droplets. These results indicate that the superhydrophobic cellulose paper‐based D‐TENG is potentially a strong candidate for harvesting energy from raindrops, thereby making it a promising sustainable energy source for next‐generation electronics. [ABSTRACT FROM AUTHOR]

Having been generated with a tremendous amount annually, paper waste (PW) represents a large proportion in municipal solid waste (MSW) and also a potential source of renewable energy production through the application of anaerobic digestion (AD). However, the recalcitrant lignocellulosic structure poses obstacles to efficient utilization in this way. Recently, anaerobic and microaerobic pretreatment have attracted attention as approaches to overcome the obstacles of biogas production. This study was set out to present a systematic comparison and assessment of anaerobic and microaerobic pretreatment of PW with different oxygen loadings by five microbial agents: composting inoculum (CI), straw-decomposing inoculum (SI), cow manure (CM), sheep manure (SM), and digestate effluent (DE). The hints of microbial community evolution during the pretreatment and AD were tracked by 16S rRNA high-throughput sequencing. The results demonstrated that PW pretreated by DE with an oxygen loading of 15 ml/gVS showed the highest cumulative methane yield (CMY) of 343.2 ml/gVS, with a BD of 79.3%. In addition to DE, SI and SM were also regarded as outstanding microbial agents for pretreatment because of the acceleration of methane production at the early stage of AD. The microbial community analysis showed that Clostridium sensu stricto 1 and Clostridium sensu stricto 10 possessed high relative abundance after anaerobic pretreatment by SI, while Bacteroides and Macellibacteroides were enriched after microaerobic pretreatment by SM, which were all contributable to the cellulose degradation. Besides, aerobic Bacillus in SI and Acinetobacter in SM and DE probably promoted lignin degradation only under microaerobic conditions. During AD, VadinBC27 , Ruminococcaceae Incertae Sedis , Clostridium sensu stricto 1 , Fastidiosipila , and Caldicoprobacter were the crucial bacteria that facilitated the biodegradation of PW. By comparing the groups with same microbial agent, it could be found that changing the oxygen loading might result in the alternation between hydrogenotrophic and acetoclastic methanogens, which possibly affected the methanogenesis stage. This study not only devised a promising tactic for making full use of PW but also provided a greater understanding of the evolution of microbial community in the pretreatment and AD processes, targeting the efficient utilization of lignocellulosic biomass in full-scale applications. [ABSTRACT FROM AUTHOR]

[Display omitted] • Waste office paper was utilized as a substrate for microbial lipid production. • A detailed optimization study has been conducted for biomass and lipid yield. • Optimization results in10.55 g/L biomass, 6.13 g/L lipid with 58% lipid content. • Biodiesel properties of the produced lipids met with the international standards. • A solution to mitigate the hazardous effects caused by waste and fossil fuel. Environmental issues caused by fossil fuel and its rapid depletion demand the need to produce biofuel from renewable energy resources. The disposal of waste paper in landfills causes air pollution and contaminates groundwater. Hence, exploiting paper waste as a renewable resource for microbial lipid production can solve these environmental issues in a greener way. Further, these microbial lipids are a reliable source for biodiesel production. In this study, waste office paper was utilized as a substrate to produce microbial lipids through fermentation by the oleaginous yeast, Rhodosporidium toruloides, using a biorefinery approach. The production conditions were optimized using the Box-Behnken design; a fermentation time of 116.16 h, a C/N ratio of 60, and an inoculum concentration of 9.67% yielded a biomass of 10.55 g/L and a lipid yield of 6.13 g/L with a total lipid content of 58%. The major lipids produced were oleic acid (42%), palmitic acid (36%), stearic acid (9.8%), and myristic acid (8%), which clearly indicates the suitability of the lipids produced by R. toruloides for biodiesel production. The predicted biodiesel properties of the transesterified product met the international standard specifications. Hence, utilizing waste office paper for biodiesel production will be an effective way of mitigating the environmental pollution caused by waste paper and the harvesting of fossil fuels. [ABSTRACT FROM AUTHOR]

Due to the health and environment impacts of fossil fuels utilization, biofuels have been investigated as a potential alternative renewable source of energy. Bioethanol is currently the most produced biofuel, mainly of first generation, resulting in food-fuel competition. Second generation bioethanol is produced from lignocellulosic biomass, but a costly and difficult pretreatment is required. The pulp and paper industry has the biggest income of biomass for non-food-chain production, and, simultaneously generates a high amount of residues. According to the circular economy model, these residues, rich in monosaccharides, or even in polysaccharides besides lignin, can be utilized as a proper feedstock for second generation bioethanol production. Biorefineries can be integrated in the existing pulp and paper industrial plants by exploiting the high level of technology and also the infrastructures and logistics that are required to fractionate and handle woody biomass. This would contribute to the diversification of products and the increase of profitability of pulp and paper industry with additional environmental benefits. This work reviews the literature supporting the feasibility of producing ethanol from Kraft pulp, spent sulfite liquor, and pulp and paper sludge, presenting and discussing the practical attempt of biorefineries implementation in pulp and paper mills for bioethanol production. [ABSTRACT FROM AUTHOR]

With the depletion of fossil energy, it becomes more and more urgent to find alternative energy sources. Renewable energy plays an important role in energy structure transition. The change of energy structure has challenged the operation of traditional power systems to a great extent. Emission load dispatch problem is one of fundamental issues of power system operation. It is a complex issue to reduce the time for power dispatch as short as possible in different time intervals and conditions. According to the characteristics of supply-side operation and dispatch in paper mill as well as the historical and simulation data, a dispatch model was developed based on the Generative Adversarial Nets (GAN) algorithm to solve the energy storage scheduling issue for solar photovoltaic microgrid. Industrial data was used to verify the proposed model. Compared with GA method and DQN method, the GAN method was able to reduce the operating costs by 3.639% and 2.734%. The results show that the model can effectively decrease the operation cost. [ABSTRACT FROM AUTHOR]

Pulp and paper mills generate large amounts of waste organic matter that may be converted to renewable energy in form of methane. The anaerobic treatment of mill wastewater is widely accepted however, usually only applied to few selected streams. Chemical oxygen demand (COD) removal rates in full-scale reactors range between 30 and 90%, and methane yields are 0.30–0.40 m 3 kg −1 COD removed. Highest COD removal rates are achieved with condensate streams from chemical pulping (75–90%) and paper mill effluents (60–80%). Numerous laboratory and pilot-scale studies have shown that, contrary to common perception, most other mill effluents are also to some extent anaerobically treatable. Even for difficult-to-digest streams such as bleaching effluents COD removal rates range between 15 and 90%, depending on the extent of dilution prior to anaerobic treatment, and the applied experimental setting. Co-digestion of different streams containing diverse substrate can level out and diminish toxicity, and may lead to a more robust microbial community. Furthermore, the microbial population has the ability to become acclimated and adapted to adverse conditions. Stress situations such as toxic shock loads or temporary organic overloading may be tolerated by an adapted community, whereas they could lead to process disturbance with an un-adapted community. Therefore, anaerobic treatment of wastewater containing elevated levels of inhibitors or toxicants should be initiated by an acclimation/adaptation period that can last between a few weeks and several months. In order to gain more insight into the underlying processes of microbial acclimation/adaptation and co-digestion, future research should focus on the relationship between wastewater composition, reactor operation and microbial community dynamics. The potential for engineering and managing the microbial resource is still largely untapped. Unlike in wastewater treatment, anaerobic digestion of mill biosludge (waste activated sludge) and primary sludge is still in its infancy. Current research is mainly focused on developing efficient pretreatment methods that enable fast hydrolysis of complex organic matter, shorter sludge residence times and as a consequence, smaller sludge digesters. Previous experimental studies indicate that the anaerobic digestibility of non-pretreated biosludge from pulp and paper mills varies widely, with volatile solids (VS) removal rates of 21–55% and specific methane yields ranging between 40 and 200 mL g −1 VS fed. Pretreatment can increase the digestibility to some extent, however in almost all reported cases, the specific methane yield of pretreated biosludge did not exceed 200 mL g −1 VS fed. Increases in specific methane yield mostly range between 0 and 90% compared to non-pretreated biosludge, whereas larger improvements were usually achieved with more difficult-to-digest biosludge. Thermal treatment and microwave treatment are two of the more effective methods. The heat required for the elevated temperatures applied in both methods may be provided from surplus heat that is often available at pulp and paper mills. Given the large variability in specific methane yield of non-pretreated biosludge, future research should focus on the links between anaerobic digestibility and sludge properties. Research should also involve mill-derived primary sludge. Although biosludge has been the main target in previous studies, primary sludge often constitutes the bulk of mill-generated sludge, and co-digestion of a mixture between both types of sludge may become practical. The few laboratory studies that have included mill primary sludge indicate that, similar to biosludge, the digestibility can range widely. Long-term studies should be conducted to explore the potential of microbial adaptation to lignocellulosic material which can constitute more than half of the organic matter in pulp and paper mill sludge. [ABSTRACT FROM AUTHOR]

Current energy shortage and environmental issues resulting from the use of fossil fuels have lead to exploitation of renewable energy resources that includes municipal waste and agricultural residues. These residues are available, indigenous and are environmental friendly but some can not be used directly in combustion process due high moisture content and low volumetric energy unless by briquetting. The study was undertaken to assess the combustion characteristic of binderless briquettes produced from waste paper and groundnut shell. Combustion characteristics investigated were ignition time, burning time, calorific values, burning rate, specific fuel consumption, fuel efficiency and water boiling time. The calorific values of the briquettes ranged from 19.51 - 19.92 MJ/kg, while the thermal efficiency ranges between 13.75 – 21.64%, other results shows that the average burning rate between 0.511 and 1.133 kg/hr and the specific fuel consumption ranges between 0.087 and 0.131 J/g. The recorded boiling time values were between 17.5 and 30.0 minutes for cold start and 15.0 and 20.0 minutes for hot start. The results shows that waste paper and groundnut shell up to 25% in composition composite briquettes were found to have good combustion characteristics which qualify them as alternative to firewood for domestic and industrial energy. However, production of briquettes from waste paper and groundnut shell at mixing ratio of 85:15 was found to comparatively better from all experiment conducted.

Worldwide increasing energy demand is today permanently covered by a majority of non-renewable energy sources, namely by coal, crude oil and natural gas. This causes the rapid decline of their reserves and the time gets near when they will be run out. Therefore in the last years the exploitation of renewable energy sources has been permanently preferred. One of alternative fuel forms is fuel on the basis of paper waste. In this paper the results of tests are published, which were carried out using six sorts of recovered paper and board (group and grade 1.05, 1.06, 2.02, 2.05, 2.07 and 2.08 according to CSN EN 643:2002), pressed into the form of briquettes. During the tests following briquettes parameters were watched: moisture content, ash amount, gross calorific value, length and diameter, weight, density, rupture force and mechanical durability. It was proved that briquettes made from recovered paper and board compared with briquettes from wood waste are of high density, high mechanical durability and for their rupture, relatively high force is necessary. But at the same time they have high ash amount and low gross calorific value.

Bioethanol produced from lignocellulosic feedstock is a renewable substitute tolessening fossil fuels. The potential of waste office paper (WOP) to be used as renewable biomass for the production of reducing sugar via the enzymatic hydrolysis was evaluated in this study, as well as the production of bioethanol. The pretreatment was accomplished by first presoaking of (WOP) for (24 h), followed by treatment with a 0.1% N NaOH solution. Hydrolysis process was conducted with a crude cellulolytic enzymes produced by Cellulomonasuda (PTCC 1259). The effects of three factors (hydrolysis time, temperature and pH) on the extent of Saccharification were optimized by means of central composite design (CCD) and response surface methodology (RSM). Two of three factors (hydrolysis time and temperature) were identified to have significant effects (p < 0.05) on glucose release. Under optimum hydrolysis conditions the maximum amount of sugar released and hydrolysis efficiency were (23.86 g/L) and (89.4%), respectively. Sugars released from (WOP) were fermented into bioethanol (0.498 g bioethanol/ g glucose) with Saccharomyces cerevisiae. The bioethanol production from sugars released from (WOP) using Saccharomyces cerevisiae was (11.88 g/L) after 48 h of cultivation, corresponding to a volumetric productivity of (0.247 g bioethanol/ L h). This study of enzymatic hydrolysis was a promising technique to develop bioethanol production from (WOP). [ABSTRACT FROM AUTHOR]

In this framework, experimental tests on different battery technologies, BMS and cooling systems are extremely important to extend the battery life and BEV performance (Sehil et al. [[13]]). Electrical machines and magnetic components, high-voltage voltage power converters, and battery storage systems are some basic bricks to build an effective and efficient energy conversion environment. Electrical Machines and Power Converters The electrical power conversion from renewable energy sources plays a crucial role in the development of a sustainable society. Finally, the fil rouge of every contribution in this section is oriented to investigate the power converters, electrical machines, magnetic components, and battery storage systems in actual energy conversion applications for renewable energy sources integration by a modelling approach. [Extracted from the article]

This study explored the association between renewable energy uptake and digitalization in the sector by reviewing relevant literature (published 2010–2022), with the aim of identifying the existing utilization of digital technologies within the sector, challenges to adoption, and future prospects. Different search engines (SCOPUS, Web of Science, and Google Scholar) were used to locate relevant papers and documents. The results revealed the high significance of digital technologies in supporting the renewable energy sector, with high costs and security risks representing the key challenges. Most papers reviewed had a positive outlook, but recommended further research and development for effective energy transition and resilient infrastructure. The current drivers of the integration of digital technologies to support the diffusion of renewable energy sources appear to extend beyond energy demand and involve many aspects of sustainability and sustainable development. Compared with previous reviews, this work has unique scope and novelty since it considers the bigger picture of the coupling between digitalization and the renewable energy sector, with a greater focus on critical areas in these two interconnected bodies that need to be addressed. The relatively small sample of relevant papers (69 from 836 hits) located in the literature review confirms the need for more research covering the subject in greater depth. [ABSTRACT FROM AUTHOR]

Arid areas account for more than 20% of Earth's surface. Many of these arid areas suffer from harsh climates where energy consumption is high and production coexists with high hydrological stresses. In such areas, the production of water is directly linked to the production of electricity, bringing the Energy–Water nexus to a higher level [Heggy et al., Sustainable Energy-Water-Environment Nexus in Deserts (Springer, 2022)]. Under the current energy transition from a fossil-based economy to a renewable energy-based system, arid areas are seen as potential reservoirs for electricity production due to their high solar potential, thereby helping to achieve global decarbonation targets. This energy production transition will strongly affect the Energy–Water nexus as it will contribute to the decoupling of electricity from water production. The International Conference on Sustainable Energy–Water–Environment Nexus 2019 (ICSEWEN19) conference was the first to address the Sustainable Energy–Water Nexus in Deserts, bridging the gap between research and industry and highlighting the research capabilities relevant to Qatar, the region, and internationally. The Invited Papers from the International Conference on Sustainability, Energy, Water, and Environment Nexus in Desert Climates Special Collection in Journal of Renewable and Sustainable Energy presents articles covering the main elements of the conference with respect to solar photovoltaic implementation in desert environments as a key element to succeed in this global energy transition. [ABSTRACT FROM AUTHOR]

Emerging global environmental pollution issues have caused a reduction in coal utilization, leading to an increased research focus on biomass use as an alternative. However, due to the low heat values of biomass, studies in this field are still in progress. Biomass primarily comprises cellulose, hemicellulose, and lignin. To determine the composition of these three components, the measurement methods recommended by TAPPI (Technical Association of the Pulp and Paper Industry) and NREL (National Renewable Energy Laboratory) are typically employed involving equipment such as HPLC. However, these methods are time consuming. In this study, we proposed a model for predicting cellulose, hemicellulose, and lignin contents based on elemental and industrial analyses. A dataset comprising 174 samples was used to develop this model. This was validated using 25 additional samples. The R2P values for cellulose, hemicellulose, and lignin were 0.6104–0.6362, 0.4803–0.5112, and 0.7247–0.7914, respectively; however, the R2CV values obtained from the validation results were 0.7387–0.7837, 0.3280–0.4004, and 0.7427–0.7757, respectively. The optimal models selected for cellulose, lignin, and hemicellulose were C1, L2, and 100-(C1-L2) or H2, respectively. Our predictions for woody and herbaceous biomass, including torrefied samples, should be applied with caution to other biomass types due to the potential accuracy limitations. To enhance the prediction accuracy, future research should broaden the range of biomass types considered and gather more data specifically related to woody and herbaceous biomass. [ABSTRACT FROM AUTHOR]