Search

Power shift tractors have been widely used in agricultural tractors in recent years because of their advantages of uninterrupted power during shifting, high transmission efficiency and high stability. As one of the indispensable driving states of the power shift tractor, the starting process requires a small impact and a starting speed that meets the driver's requirements. In this paper, aiming at such contradictory requirements, the starting control strategy of a power shift tractor is formulated with the goal of starting quality and the driver's intention. Firstly, the identification characteristics of the driver under three starting intentions are obtained by a real vehicle test. An extreme learning machine with fast identification speed and short training time is used to establish the basic driver's intention identification model. For the instability of the identification results of the Extreme Learning Machine (ELM), the particle swarm optimization algorithm (PSO) is used to optimize the ELM. The optimized extreme learning machine model has an accuracy of 96.891% for driver's intention identification. The wet clutch is an important part of the power shift gearbox. In this paper, the starting control strategy knowledge base of the starting clutch is established by a combination of bench tests and simulation tests. Through the fuzzy algorithm, the driver's intention is combined with the starting control strategy. Different drivers' intentions will affect the comprehensive evaluation model of the clutch (the single evaluation index of the clutch is: the maximum sliding power, the sliding power, the speed stability time, the impact degree), thus affecting the final choice of the starting clutch control strategy considering the driver's intention. On this basis, this paper studies and establishes the MPC starting controller for the power shift gearbox. Compared with the linear control strategy, the PSO-ELM-fuzzy weight starting strategy proposed in this paper can reduce the maximum sliding friction power by 45%, the sliding friction power by 69.45%, and the speed stabilization time by 0.11 s. The effectiveness of the starting control strategy considering the driver's intention proposed in this paper to improve the starting quality of the power shift tractor is verified. [ABSTRACT FROM AUTHOR]

The problem of finding optimal block designs can be formulated as a combinatorial optimization, but its resolution is still a formidable challenge. This paper presents a general and user-friendly algorithm, namely Modified Particle Swarm Optimization (MPSO), to construct optimal or near-optimal block designs. It can be used for several classes of block designs such as binary, non-binary and test-control block designs with correlated or uncorrelated observations. In order to evaluate the algorithm, we compare our results with the optimal designs presented in some published papers. An advantage of our algorithm is its independency to the sizes of blocks and the structure of correlations. [ABSTRACT FROM AUTHOR]

In everyday life, 5G-based localization technology is commonly used, but non-line-of-sight (NLOS) environments can block the propagation of the localization signal, thus preventing localization. In order to solve this problem, this paper proposes a reconfigurable intelligent surface non-line-of-sight time difference of arrival (TDOA) localization (RNTL) algorithm. Firstly, a model of a reflective-surface-based intelligent localization (RBP) system is constructed, which utilizes multiple RISs deployed in the air to reflect signals. Secondly, in order to reduce the localization error, this paper establishes the optimization problem of minimizing the distance between each estimated coordinate and the actual coordinate and solves it via the piecewise linear chaotic map–gray wolf optimization algorithm (PWLCM-GWO). Finally, the simulation results show that the RNTL algorithm significantly outperforms the traditional gray wolf optimization and particle swarm optimization algorithms in different signal-to-noise ratios, and the localization errors are reduced by 46% and 53.5%, respectively. [ABSTRACT FROM AUTHOR]

As the terminal of the power system, the distribution network is the main area where failures occur. In addition, with the integration of distributed generation, the traditional distribution network becomes more complex, rendering the conventional fault location algorithms based on a single power supply obsolete. Therefore, it is necessary to seek a new algorithm to locate the fault of the distributed power distribution network. In existing fault localization algorithms for distribution networks, since there are only two states of line faults, which can usually be represented by 0 and 1, most algorithms use discrete algorithms with this characteristic for iterative optimization. Therefore, this paper combines the advantages of the particle swarm algorithm and genetic algorithm and uses continuous real numbers for iteration to construct a successive particle swarm genetic algorithm (SPSO-GA) different from previous algorithms. The accuracy, speed, and fault tolerance of SPSO-GA, discrete particle swarm Genetic algorithm, and artificial fish swarm algorithm are compared in an IEEE33-node distribution network with the distributed power supply. The simulation results show that the SPSO-GA algorithm has high optimization accuracy and stability for single, double, or triple faults. Furthermore, SPSO-GA has a rapid convergence velocity, requires fewer particles, and can locate the fault segment accurately for the distribution network containing distorted information. [ABSTRACT FROM AUTHOR]

To address the reactive power optimization control problem in offshore wind farms (OWFs), this paper proposes an adaptive reactive power optimization control strategy based on an improved Particle Swarm Optimization (PSO) algorithm. Firstly, an OWF multi-objective optimization control model is established, with the total sum of voltage deviations at wind turbine (WT) terminals, active power network losses, and reactive power margin of WTs as comprehensive optimization objectives. Innovatively, adaptive weighting coefficients are introduced for the three sub-objectives, enabling the weights of each optimization objective to be adaptively adjusted based on real-time operating conditions, thus enhancing the adaptability of the reactive power optimization model to changes in operating conditions. Secondly, a Uniform Adaptive Particle Swarm Optimization (UAPSO) algorithm is proposed. On one hand, the algorithm initializes the particle swarm using a uniform initialization method; on the other hand, it improves the particle velocity update formula, allowing the inertia coefficient to adaptively adjust based on the number of iterations and the fitness ranking of particles. Simulation results demonstrate the following: (1) Under various operating conditions, the proposed adaptive multi-objective reactive power optimization strategy can ensure the stability of node voltages in offshore wind farms, reduce active power losses, and simultaneously improve reactive power margins. (2) Compared with the traditional PSO algorithm, UAPSO exhibits an approximately 10% improvement in solution speed and enhanced solution accuracy. [ABSTRACT FROM AUTHOR]

This paper presents an improved swarming algorithm that enhances low-illumination images. The algorithm combines a hybrid Harris Eagle algorithm with double gamma (IHHO-BIGA) and incomplete beta (IHHO-NBeta) functions. This paper integrates the concept of symmetry into the improvement steps of the image adaptive enhancement algorithm. The enhanced algorithm integrates chaotic mapping for population initialization, a nonlinear formula for prey energy calculation, spiral motion from the black widow algorithm for global search enhancement, a nonlinear inertia weight factor inspired by particle swarm optimization, and a modified Levy flight strategy to prevent premature convergence to local optima. This paper compares the algorithm's performance with other swarm intelligence algorithms using commonly used test functions. The algorithm's performance is compared against several emerging swarm intelligence algorithms using commonly used test functions, with results demonstrating its superior performance. The improved Harris Eagle algorithm is then applied for image adaptive enhancement, and its effectiveness is evaluated on five low-illumination images from the LOL dataset. The proposed method is compared to three common image enhancement techniques and the IHHO-BIGA and IHHO-NBeta methods. The experimental results reveal that the proposed approach achieves optimal visual perception and enhanced image evaluation metrics, outperforming the existing techniques. Notably, the standard deviation data of the first image show that the IHHO-NBeta method enhances the image by 8.26%, 120.91%, 126.85%, and 164.02% compared with IHHO-BIGA, the single-scale Retinex enhancement method, the homomorphic filtering method, and the limited contrast adaptive histogram equalization method, respectively. The processing time of the improved method is also better than the previous heuristic algorithm. [ABSTRACT FROM AUTHOR]

Lithium-ion batteries are widely used in power grids as a common form of energy storage in power stations. The state of charge (SOC) and state of health (SOH) reflect the capacity and lifetime variation in the Li-ion batteries, and they are important state parameters of Li-ion batteries. Therefore, the establishment of accurate SOC and SOH prediction models is an essential prerequisite for the correct assessment of the status of lithium batteries, the improvement of the operational accuracy of energy-storage stations, and the development of maintenance plans for energy-storage stations. This paper first analyzes the correlation between SOC and SOH, and then proposes a joint SOC and SOH prediction model using the particle swarm optimization (PSO) algorithm to optimize the extreme gradient boosting algorithm (XGBoost), which takes into account the dynamic correlation between SOC and SOH dynamics, thus enabling more accurate SOC and SOH prediction. Finally, the prediction model is validated using the Oxford battery aging dataset. The correlation between SOC and SOH is verified by comparing the joint prediction results with the SOC individual prediction results. Then, the prediction results of the PSO-XGBoost model, the traditional XGBoost model, and the long short-term memory neural network are compared to verify the effectiveness and accuracy of the PSO-XGBoost model. [ABSTRACT FROM AUTHOR]

Cryo-electron micrograph images have various characteristics such as varying sizes, shapes, and distribution densities of individual particles, severe background noise, high levels of impurities, irregular shapes, blurred edges, and similar color to the background. How to demonstrate good adaptability in the field of image vision by picking up single particles from multiple types of cryo-electron micrographs is currently a challenge in the field of cryo-electron micrographs. This paper combines the characteristics of the MixUp hybrid enhancement algorithm, enhances the image feature information in the pre-processing stage, builds a feature perception network based on the channel self-attention mechanism in the forward network of the Swin Transformer model network, achieving adaptive adjustment of self-attention mechanism between different single particles, increasing the network's tolerance to noise, Incorporating PReLU activation function to enhance information exchange between pixel blocks of different single particles, and combining the Cross-Entropy function with the softmax function to construct a classification network based on Swin Transformer suitable for cryo-electron micrograph single particle detection model (Swin-cryoEM), achieving mixed detection of multiple types of single particles. Swin-cryoEM algorithm can better solve the problem of good adaptability in picking single particles of many types of cryo-electron micrographs, improve the accuracy and generalization ability of the single particle picking method, and provide high-quality data support for the three-dimensional reconstruction of a single particle. In this paper, ablation experiments and comparison experiments were designed to evaluate and compare Swin-cryoEM algorithms in detail and comprehensively on multiple datasets. The Average Precision is an important evaluation index of the evaluation model, and the optimal Average Precision reached 95.5% in the training stage Swin-cryoEM, and the single particle picking performance was also superior in the prediction stage. This model inherits the advantages of the Swin Transformer detection model and is superior to mainstream models such as Faster R-CNN and YOLOv5 in terms of the single particle detection capability of cryo-electron micrographs. [ABSTRACT FROM AUTHOR]

The features of the kernel extreme learning machine—efficient processing, improved performance, and less human parameter setting—have allowed it to be effectively used to batch multi-label classification tasks. These classic classification algorithms must at present contend with accuracy and space–time issues as a result of the vast and quick, multi-label, and concept drift features of the developing data streams in the practical application sector. The KELM training procedure still has a difficulty in that it has to be repeated numerous times independently in order to maximize the model's generalization performance or the number of nodes in the hidden layer. In this paper, a kernel extreme learning machine multi-label data classification method based on the butterfly algorithm optimized by particle swarm optimization is proposed. The proposed algorithm, which fully accounts for the optimization of the model generalization ability and the number of hidden layer nodes, can train multiple KELM hidden layer networks at once while maintaining the algorithm's current time complexity and avoiding a significant number of repeated calculations. The simulation results demonstrate that, in comparison to the PSO-KELM, BBA-KELM, and BOA-KELM algorithms, the PSOBOA-KELM algorithm proposed in this paper can more effectively search the kernel extreme learning machine parameters and more effectively balance the global and local performance, resulting in a KELM prediction model with a higher prediction accuracy. [ABSTRACT FROM AUTHOR]

Metaheuristic optimization algorithms (MHA) play a significant role in obtaining the best (optimal) values of the system's parameters to improve its performance. This role is significantly apparent when dealing with systems where the classical analytical methods fail. Fractional-order (FO) systems have not yet shown an easy procedure to deal with the determination of their optimal parameters through traditional methods. In this paper, a recent, systematic. And comprehensive review is presented to highlight the role of MHA in obtaining the best set of gains and orders for FO controllers. The systematic review starts by exploring the most relevant publications related to the MHA and the FO controllers. The study is focused on the most popular controllers such as the FO-PI, FO-PID, FO Type-1 fuzzy-PID, and FO Type-2 fuzzy-PID. The time domain is restricted in the articles published through the last decade (2014:2023) in the most reputed databases such as Scopus, Web of Science, Science Direct, and Google Scholar. The identified number of papers, from the entire databases, has reached 850 articles. A Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology was applied to the initial set of articles to be screened and filtered to end up with a final list that contains 82 articles. Then, a thorough and comprehensive study was applied to the final list. The results showed that Particle Swarm Optimization (PSO) is the most attractive optimizer to the researchers to be used in the optimal parameters identification of the FO controllers as it attains about 25% of the published papers. In addition, the papers that used PSO as an optimizer have gained a high citation number despite the fact that the Chaotic Atom Search Optimization (ChASO) is the highest one, but it is used only once. Furthermore, the Integral of the Time-Weighted Absolute Error (ITAE) is the best nominated cost function. Based on our comprehensive literature review, this appears to be the first review paper that systematically and comprehensively addresses the optimization of the parameters of the fractional-order PI, PID, Type-1, and Type-2 fuzzy controllers with the use of MHAs. Therefore, the work in this paper can be used as a guide for researchers who are interested in working in this field. [ABSTRACT FROM AUTHOR]

In recent days, the major concern for diabetic patients is foot ulcers. According to the survey, among 15 people among 100 are suffering from this foot ulcer. The wound or ulcer found which is found in diabetic patients consumes more time to heal, also required more conscious treatment. Foot ulcers may lead to deleterious danger condition and also may be the cause for loss of limb. By understanding this grim condition, this paper proposes Fractional-Order Darwinian Particle Swarm Optimization (FO-DPSO) technique for analyzing foot ulcer 2D color images. This paper deals with standard image processing, i.e. efficient segmentation using FO-DPSO algorithm and extracting textural features using Gray Level Co-occurrence Matrix (GLCM) technique. The whole effort projected results as accuracy of 91.2%, sensitivity of 100% and specificity as 96.7% for Naïve Bayes classifier and accuracy of 91.2%, sensitivity of 100% and sensitivity of 79.6% for Hoeffding tree classifier. [ABSTRACT FROM AUTHOR]

The optimization and allocation of transport cost savings among stakeholders are two important issues that influence the satisfaction of information providers, drivers and passengers in ridesharing recommendation systems. For optimization issues, finding optimal solutions for nonconvex constrained discrete ridesharing optimization problems poses a challenge due to computational complexity. For the allocation of transport cost savings issues, the development of an effective method to allocate cost savings in ridesharing recommendation systems is an urgent need to improve the acceptability of ridesharing. The hybridization of different metaheuristic approaches has demonstrated its advantages in tackling the complexity of optimization problems. The principle of the hybridization of metaheuristic approaches is similar to a marriage of two people with the goal of having a happy ending. However, the effectiveness of hybrid metaheuristic algorithms is unknown a priori and depends on the problem to be solved. This is similar to a situation where no one knows whether a marriage will have a happy ending a priori. Whether the hybridization of the Firefly Algorithm (FA) with Particle Swarm Optimization (PSO) or Differential Evolution (DE) can work effectively in solving ridesharing optimization problems needs further study. Motivated by deficiencies in existing studies, this paper focuses on the effectiveness of hybrid metaheuristic algorithms for solving ridesharing problems based on the hybridization of FA with PSO or the hybridization of FA with DE. Another focus of this paper is to propose and study the effectiveness of a new method to allocate ridesharing cost savings to the stakeholders in ridesharing systems. The developed hybrid metaheuristic algorithms and the allocation method have been compared with examples of several application scenarios to illustrate their effectiveness. The results indicate that hybridizing FA with PSO creates a more efficient algorithm, whereas hybridizing FA with DE does not lead to a more efficient algorithm for the ridesharing recommendation problem. An interesting finding of this study is very similar to what happens in the real world: "Not all marriages have happy endings". [ABSTRACT FROM AUTHOR]

Conventionally, researchers have favored the model-based control scheme for controlling gantry crane systems. However, this method necessitates a substantial investment of time and resources in order to develop an accurate mathematical model of the complex crane system. Recognizing this challenge, the current paper introduces a novel data-driven control scheme that relies exclusively on input and output data. Undertaking a couple of modifications to the conventional marine predators algorithm (MPA), random average marine predators algorithm (RAMPA) with tunable adaptive coefficient to control the step size (CF) has been proposed in this paper as an enhanced alternative towards fine-tuning data-driven multiple-node hormone regulation neuroendocrine-PID (MnHR-NEPID) controller parameters for the multi-input–multi-output (MIMO) gantry crane system. First modification involved a random average location calculation within the algorithm's updating mechanism to solve the local optima issue. The second modification then introduced tunable CF that enhanced search capacity by enabling users' resilience towards attaining an offsetting level of exploration and exploitation phases. Effectiveness of the proposed method is evaluated based on the convergence curve and statistical analysis of the fitness function, the total norms of error and input, Wilcoxon's rank test, time response analysis, and robustness analysis under the influence of external disturbance. Comparative findings alongside other existing metaheuristic-based algorithms confirmed excellence of the proposed method through its superior performance against the conventional MPA, particle swarm optimization (PSO), grey wolf optimizer (GWO), moth-flame optimization (MFO), multi-verse optimizer (MVO), sine-cosine algorithm (SCA), salp-swarm algorithm (SSA), slime mould algorithm (SMA), flow direction algorithm (FDA), and the formally published adaptive safe experimentation dynamics (ASED)-based methods. [ABSTRACT FROM AUTHOR]

For underwater target exploration, multiple Autonomous Underwater Vehicles (AUVs) have shown significant advantages over single AUVs. Aiming at Multi-AUV task allocation, which is an important issue for collaborative work in underwater environments, this paper proposes a Multi-AUV task allocation method based on the Differential Evolutionary Gray Wolf Optimization (DE-GWO) algorithm. Firstly, the working process of the Multi-AUV system was analyzed, and the allocation model and objective function were established. Then, we combined the advantages of the strong global search capability of the Differential Evolutionary (DE) algorithm and the excellent convergence performance of Gray Wolf Optimization (GWO) to solve the task assignment of the Multi-AUV system. Finally, a reassignment mechanism was used to solve the problem of AUV failures during the task's execution. In the simulation comparison experiments, the DE-GWO, GWO, DE, and Particle Swarm Optimization (PSO) algorithms were carried out for different AUV execution capabilities, respectively. [ABSTRACT FROM AUTHOR]

Recently, there had been a massive group of people, who were being rapidly affected by melanoma. Melanoma is a form of skin cancer that develops on the skin's surface layer. This is primarily caused due to excessive skin exposure to UV radiation and severe sunburns. Thus, the early detection of melanoma can aid us to cure it completely. This paper intends to introduce a new melanoma detection framework with four main phases viz. segmentation, feature extraction, optimal feature selection, as well as detection. Initially, the segmentation process takes place to the input skin image via Fuzzy C-Means Clustering (FCM) approach. From the segmented image ( Im seg ) , some of the features such as Gray Level Run Length Matrix (GLRM), Local Vector Pattern (LVP), Local Binary Pattern (LBP), Local Directional Pattern (LDP) and Local Tetra Pattern (LTrP) are extracted. As the extracted features (F) suffered from the issue of "curse of dimensionality", this paper utilizes optimization to select optimal features, which makes the detection more precise. As a novelty, a new hybrid algorithm Particle-Assisted Moth Search Algorithm (PA-MSA) is introduced that hybridizes the concept of Moth Search Algorithm (MSA) and Particle Swarm Optimization (PSO), respectively. For the classification process, the optimally chosen features (F opt ) are fed as input, where Deep Convolution Neural Network (DCNN) is used. Finally, a performance-based comparative analysis is conducted among the proposed PA-MSA as well as the existing models with respect to various measures. [ABSTRACT FROM AUTHOR]

In order to improve the autonomy and intelligence of group animation behavior, this paper proposes a particle swarm optimization algorithm for automatic control of group animation behavior. After the user inputs the group animation behavior construction target, the individual path is planned according to the fixed behavior rules, and the particle swarm optimization algorithm and the improved artificial fish swarm optimization algorithm are used to select the optimal action for the individual in the group animation according to the top-down control process. The experimental results show that after the PSO converges to the global optimal solution, the evolution times of the PSO converge to the global optimal solution again when the surrounding environment changes 10 times. The population diversity of particle swarm optimization algorithm is obviously better than those of the other two algorithms in the process of automatically controlling the movement of individuals to the circle and to the stand in the crowd animation. Compared with the original algorithm AFSA, the improved artificial fish swarm algorithm proposed in this paper is easier to obtain the global optimal value, and the optimization speed is also improved. In conclusion, the example analysis verifies that the algorithm can effectively realize the automatic control of group animation behavior and has high convergence speed and high autonomy. [ABSTRACT FROM AUTHOR]

In the current complex cyber environment, malicious attacks take various forms and constantly change. To overcome the problems of low detection efficiency and high false alarm rate in traditional intrusion detection techniques, a new method of network intrusion detection combining the variable scale chaos bat (MSCB) algorithm and BP neural network (BPNN) called MSCB-BPNN is proposed in this paper. In the proposed approach, a new MSCB algorithm is proposed to improve the BPNN by optimizing its thresholds and weights so as to prevent it from falling into local optimum. To verify the practical classification performance of the proposed method for intrusion detection, some experiments are carried out. In these experiments, the proposed approach is compared with BPNN, SA-BPNN, and GA-BPNN on the benchmark intrusion detection datasets KDD cup 99 and UNSW-NB15. The experimental results show that the accuracy of the proposed method can reach 99.4% and 99.8% accuracy on the KDD cup 99 training and test sets, respectively, while 89.0% and 93.9% accuracy on the UNSW-NB15 training and test sets, respectively, which are higher than BPNN, SA-BPNN, and GA-BPNN. Furthermore, the precision and recall ratio of MSCB-BPNN are also superior to other approaches. Thus, the proposed model has significant advantages over BPNN, SA-BPNN, and GA-BPNN methods. [ABSTRACT FROM AUTHOR]

As is well known that the global optimization ability of the Fruit fly Optimization Algorithm (FOA)is weak because it is easy to fall into local optimum. In this paper, a Fruit Fly Optimization Algorithm based on Locality Sensitive Hashing-aware (LSHFOA)was proposed. The locality sensitive hashing mechanism to optimize the generation mechanism for swarm population individuals was used, which can improve the individual diversity of the population. Meanwhile, when the fruit fly population falls into the local optimum, the locality sensitive hashing mechanism was adopted to change the population location, which is used for jumping out of local optimal limits. To verify the performance of LSHFOA, it was compared with FOA and its improvement algorithms CFOA, and IFFO with 8 representative benchmark functions. A large number of experimental results showed that LSHFOA has a faster convergence speed and higher precision of optimization for function optimization, especially in high-dimensional multi-peak functions. In addition to the theoretical evaluation, we also evaluate its performance in a real-world scenario. Generally, an edge computing environment, as an extension of cloud computing, can allow the users to access the network in a low-latency manner. In this way, to capture the high-speed convergence advantage, this paper makes the first attempt to tackle a classic research problem in the edge computing environment, i.e., the edge server placement problem. The experimental results show that the new algorithm has an excellent application effect. [ABSTRACT FROM AUTHOR]

This paper proposes a novel multi-hybrid algorithm named DHPN, using the best-known properties of dwarf mongoose algorithm (DMA), honey badger algorithm (HBA), prairie dog optimizer (PDO), cuckoo search (CS), grey wolf optimizer (GWO) and naked mole rat algorithm (NMRA). It follows an iterative division for extensive exploration and incorporates major parametric enhancements for improved exploitation operation. To counter the local optima problems, a stagnation phase using CS and GWO is added. Six new inertia weight operators have been analyzed to adapt algorithmic parameters, and the best combination of these parameters has been found. An analysis of the suitability of DHPN towards population variations and higher dimensions has been performed. For performance evaluation, the CEC 2005 and CEC 2019 benchmark data sets have been used. A comparison has been performed with differential evolution with active archive (JADE), self-adaptive DE (SaDE), success history based DE (SHADE), LSHADE-SPACMA, extended GWO (GWO-E), jDE100, and others. The DHPN algorithm is also used to solve the image fusion problem for four fusion quality metrics, namely, edge-based similarity index ( Q A B / F ), sum of correlation difference (SCD), structural similarity index measure (SSIM), and artifact measure ( N A B / F ). The average Q A B / F = 0.765508 , S C D = 1.63185 , S S I M = 0.726317 , and N A B / F = 0.006617 shows the best combination of results obtained by DHPN with respect to the existing algorithms such as DCH, CBF, GTF, JSR and others. Experimental and statistical Wilcoxon's and Friedman's tests show that the proposed DHPN algorithm performs significantly better in comparison to the other algorithms under test. [ABSTRACT FROM AUTHOR]

The growth optimizer (GO) is a novel metaheuristic algorithm designed to tackle complex optimization problems. Despite its advantages of simplicity and high efficiency, GO often encounters localized stagnation when dealing with discretized, high-dimensional, and multi-constraint problems. To address these issues, this paper proposes an enhanced version of GO called CODGBGO. This algorithm incorporates three strategies to enhance its performance. Firstly, the Circle-OBL initialization strategy is employed to enhance the quality of the initial population. Secondly, an exploration strategy is implemented to improve population diversity and the algorithm's ability to escape local optimum traps. Finally, the exploitation strategy is utilized to enhance the convergence speed and accuracy of the algorithm. To validate the performance of CODGBGO, it is applied to solve the CEC2017, CEC2020, 18 feature selection problems, and 4 real engineering optimization problems. The experiments demonstrate that the novel CODGBGO algorithm effectively addresses the challenges posed by complex optimization problems, offering a promising approach. [ABSTRACT FROM AUTHOR]

With the rapid development of new power systems, diverse new power services have imposed stricter requirements on network resources and performance. However, the traditional method of transmitting request data to the IoT management platform for unified processing suffers from large delays due to long transmission distances, making it difficult to meet the delay requirements of new power services. Therefore, to reduce the transmission delay, data transmission, storage and computation need to be performed locally. However, due to the limited resources of individual nodes in the local power wireless communication network, issues such as tight coupling between devices and resources and a lack of flexible allocation need to be addressed. The collaborative allocation of resources among multiple nodes in the local network is necessary to satisfy the multi-dimensional resource requirements of new power services. In response to the problems of limited node resources, inflexible resource allocation, and the high complexity of multi-dimensional resource allocation in local power wireless communication networks, this paper proposes a multi-objective joint optimization model for the collaborative allocation of communication, storage, and computing resources. This model utilizes the computational characteristics of communication resources to reduce the dimensionality of the objective function. Furthermore, a mouse swarm optimization algorithm based on multi-strategy improvements is proposed. The simulation results demonstrate that this method can effectively reduce the total system delay and improve the utilization of network resources. [ABSTRACT FROM AUTHOR]

Studies indicate cardiac arrhythmia is one of the leading causes of death in the world. The risk of a stroke may be reduced when an irregular and fast heart rate is diagnosed. Since it is non-invasive, electrocardiograms are often used to detect arrhythmias. Human data input may be error-prone and time-consuming because of these limitations. For early detection of heart rhythm problems, it is best to use deep learning models. In this paper, a hybrid bio-inspired algorithm has been proposed by combining whale optimization (WOA) with adaptive particle swarm optimization (APSO). The WOA is a recently developed meta-heuristic algorithm. APSO is used to increase convergence speed. When compared to conventional optimization methods, the two techniques work better together. MIT-BIH dataset has been utilized for training, testing and validating this model. The recall, accuracy, and specificity are used to measure efficiency of the proposed method. The efficiency of the proposed method is compared with state-of-art methods and produced 98.25 % of accuracy. [ABSTRACT FROM AUTHOR]

To address the issue of local optima encountered during the multi-objective optimization process with the Non-dominated Sorting Genetic Algorithm II (NSGA-II) algorithm, this paper introduces an enhanced version of the NSGA-II. This improved NSGA-II incorporates polynomial and simulated binary crossover operators into the genetic algorithm's crossover phase to refine its performance. For evaluation purposes, the classic ZDT benchmark functions are employed. The findings reveal that the enhanced NSGA-II algorithm achieves higher convergence accuracy and surpasses the performance of the original NSGA-II algorithm. When applied to the machining of the high-hardness material 20MnCrTi, four algorithms were utilized: the improved NSGA-II, the conventional NSGA-II, NSGA-III, and MOEA/D. The experimental outcomes show that the improved NSGA-II algorithm delivers a more optimal combination of process parameters, effectively enhancing the workpiece's surface roughness and material removal rate. This leads to a significant improvement in the machining quality of the workpiece surface, demonstrating the superiority of the improved algorithm in optimizing machining processes. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative Particle Swarm Optimization (PSO) Algorithm incorporating Sobol and Halton random number samplings. It evaluates the enhanced PSO's performance against conventional PSO employing Monte Carlo random number samplings. The comparison involves assessing the algorithms across nine benchmark problems and the renowned Travelling Salesman Problem (TSP). The results reveal consistent enhancements achieved by the enhanced PSO utilizing Sobol/Halton samplings across the benchmark problems. Particularly noteworthy are the Sobol-based PSO improvements in iterations and the computational times for the benchmark problems. These findings underscore the efficacy of employing Sobol and Halton random number generation methods to enhance algorithm efficiency. [ABSTRACT FROM AUTHOR]

Cloud computing has seen a major boom during the past few years. Many people have switched to cloud computing because traditional systems require complex resource distribution and cloud solutions are less expensive. Load balancing (LB) is one of the essential challenges in cloud computing used to balance the workload of cloud services. This research paper presents a performance evaluation of the existing load-balancing algorithms which are particle swarm optimization (PSO), round robin (RR), equally spread current execution (ESCE), and throttled load balancing. This study offers a detailed performance evaluation of various load-balancing algorithms by employing a cloud analyst platform. Efficiency concerning various service broker policy configurations for load-balancing algorithms' virtual machine load balance was also calculated using metrics such as optimized response time (ORT), data center processing time (DCPT), virtual machine costs, data transfer costs, and total cost for different workloads and user bases. Many of the past papers that were mentioned in the literature worked on round robin and equally spread current execution, and throttled load-balancing algorithms were based on efficiency and response time in virtual machines without recognizing the relation between the task and the virtual machines, and the practical significance of the application. A comparison of specific load-balancing algorithms has been investigated. Different service broker policy (SBP) tests have been conducted to illustrate the load-balancing algorithm capabilities. [ABSTRACT FROM AUTHOR]

In complex two-dimensional monitoring environments, how to enhance network efficiency and network lifespan while utilizing limited energy resources, and ensuring that wireless sensor networks achieve the required partial coverage of the monitoring area, are the challenges of optimizing coverage in wireless sensor networks.With the premise of ensuring connectivity in the target network area, an enhanced multi-objective salp swarm algorithm based on non-dominated sorting (EMSSA) is proposed in this paper, by jointly optimizing network coverage, node utilization, and network energy balance objectives. Firstly, the logistic chaotic mapping is used to maintain the diversity of the initial salp swarm population. Secondly, to balance global and local search capabilities, a new dynamic convergence factor is introduced. Finally, to escape local optima more effectively, a follower updating strategy is implemented to reduce the blind following of followers while retaining superior individual information. The effectiveness of the strategy is validated through comparative experiments on ZDT and DTLZ test functions, and the proposed algorithm is applied to coverage optimization in WSNs in complex environments. The results demonstrate that the algorithm can adjust coverage thresholds according to different application requirements, providing various effective coverage optimization configurations. With the same preset requirements for partial coverage achieved, both network efficiency and lifespan have been significantly improved. [ABSTRACT FROM AUTHOR]

In this paper, solving the problem of the noise covariance matrix parameters tuning of the extended Kalman filter (EKF) and unscented Kalman filter algorithms (UKF) is difficult. A speed estimation strategy for a permanent magnet synchronous motor (PMSM) based on particle swarm optimization (PSO) optimized Kalman filter (KF) series algorithms is proposed. By using MATLAB/Simulink, in this paper, 20 effective simulation experiments on the noise covariance matrix parameter optimization process are conducted to obtain the optimal covariance matrix parameters of the extended Kalman filter and unscented Kalman filter. Moreover, EKF, PSO-EKF, UKF, and PSO-UKF are also compared to verify the effectiveness of the particle swarm optimization algorithm in optimizing the systems using the extended Kalman filter and unscented Kalman filter. For the error of speed estimation, taking 4000 rpm as a reference, the system using PSO-EKF has improved by 2.125% compared to that using EKF, and the system applying PSO-UKF has improved by 0.55% compared to the system applying UKF. For the error of electrical angle estimation, taking the system errors of original algorithms as references, the system adopting PSO-EKF has decreased by 60% compared to that adopting EKF, and the system using PSO-UKF has decreased by 47% compared to the system using UKF. [ABSTRACT FROM AUTHOR]

Spam emails have become a pervasive issue in recent years, as internet users receive increasing amounts of unwanted or fake emails. To combat this issue, automatic spam detection methods have been proposed, which aim to classify emails into spam and non-spam categories. Machine learning techniques have been utilized for this task with considerable success. In this paper, we introduce a novel approach to spam email detection by presenting significant advancements to the Dandelion Optimizer (DO) algorithm. The DO is a relatively new nature-inspired optimization algorithm inspired by the flight of dandelion seeds. While the DO shows promise, it faces challenges, especially in high-dimensional problems such as feature selection for spam detection. Our primary contributions focus on enhancing the DO algorithm. Firstly, we introduce a new local search algorithm based on flipping (LSAF), designed to improve the DO's ability to find the best solutions. Secondly, we propose a reduction equation that streamlines the population size during algorithm execution, reducing computational complexity. To showcase the effectiveness of our modified DO algorithm, which we refer to as the Improved DO (IDO), we conduct a comprehensive evaluation using the Spam base dataset from the UCI repository. However, we emphasize that our primary objective is to advance the DO algorithm, with spam email detection serving as a case study application. Comparative analysis against several popular algorithms, including Particle Swarm Optimization (PSO), the Genetic Algorithm (GA), Generalized Normal Distribution Optimization (GNDO), the Chimp Optimization Algorithm (ChOA), the Grasshopper Optimization Algorithm (GOA), Ant Lion Optimizer (ALO), and the Dragonfly Algorithm (DA), demonstrates the superior performance of our proposed IDO algorithm. It excels in accuracy, fitness, and the number of selected features, among other metrics. Our results clearly indicate that the IDO overcomes the local optima problem commonly associated with the standard DO algorithm, owing to the incorporation of LSAF and the reduction in equation methods. In summary, our paper underscores the significant advancement made in the form of the IDO algorithm, which represents a promising approach for solving high-dimensional optimization problems, with a keen focus on practical applications in real-world systems. While we employ spam email detection as a case study, our primary contribution lies in the improved DO algorithm, which is efficient, accurate, and outperforms several state-of-the-art algorithms in various metrics. This work opens avenues for enhancing optimization techniques and their applications in machine learning. [ABSTRACT FROM AUTHOR]

Inspired by the migration and reproduction of species in nature to explore suitable habitats, this paper proposed a new swarm intelligence algorithm called the Migration and Reproduction Algorithm (MARA). This new algorithm discusses how to transform the behavior of an organism looking for a suitable habitat into a mathematical model, which can solve optimization problems. MARA has some common features with other optimization methods such as particle swarm optimization (PSO) and the fireworks algorithm (FWA), which means MARA can also solve the optimization problems that PSO and FWA are used to, namely, high-dimensional optimization problems. MARA also has some unique features among biology-based optimization methods. In this paper, we articulated the structure of MARA by correlating it with natural biogeography; then, we demonstrated the performance of MARA on sets of 12 benchmark functions. In the end, we applied it to optimize a practical problem of power dispatching in a multi-microgrid system that proved it has certain value in practical applications. [ABSTRACT FROM AUTHOR]

With the rapid development of the geometric modeling industry and computer technology, the design and shape optimization of complex curve shapes have now become a very important research topic in CAGD. In this paper, the Hybrid Artificial Hummingbird Algorithm (HAHA) is used to optimize complex composite shape-adjustable generalized cubic Ball (CSGC–Ball, for short) curves. Firstly, the Artificial Hummingbird algorithm (AHA), as a newly proposed meta-heuristic algorithm, has the advantages of simple structure and easy implementation and can quickly find the global optimal solution. However, there are still limitations, such as low convergence accuracy and the tendency to fall into local optimization. Therefore, this paper proposes the HAHA based on the original AHA, combined with the elite opposition-based learning strategy, PSO, and Cauchy mutation, to increase the population diversity of the original algorithm, avoid falling into local optimization, and thus improve the accuracy and rate of convergence of the original AHA. Twenty-five benchmark test functions and the CEC 2022 test suite are used to evaluate the overall performance of HAHA, and the experimental results are statistically analyzed using Friedman and Wilkerson rank sum tests. The experimental results show that, compared with other advanced algorithms, HAHA has good competitiveness and practicality. Secondly, in order to better realize the modeling of complex curves in engineering, the CSGC–Ball curves with global and local shape parameters are constructed based on SGC–Ball basis functions. By changing the shape parameters, the whole or local shape of the curves can be adjusted more flexibly. Finally, in order to make the constructed curve have a more ideal shape, the CSGC–Ball curve-shape optimization model is established based on the minimum curve energy value, and the proposed HAHA is used to solve the established shape optimization model. Two representative numerical examples comprehensively verify the effectiveness and superiority of HAHA in solving CSGC–Ball curve-shape optimization problems. [ABSTRACT FROM AUTHOR]

With the continued development of artificial intelligence technology, unmanned surface vehicles (USVs) have attracted the attention of countless domestic and international specialists and academics. In particular, path planning is a core technique for the autonomy and intelligence process of USVs. The current literature reviews on USV path planning focus on the latest global and local path optimization algorithms. Almost all algorithms are optimized by concerning metrics such as path length, smoothness, and convergence speed. However, they also simulate environmental conditions at sea and do not consider the effects of sea factors, such as wind, waves, and currents. Therefore, this paper reviews the current algorithms and latest research results of USV path planning in terms of global path planning, local path planning, hazard avoidance with an approximate response, and path planning under clustering. Then, by classifying USV path planning, the advantages and disadvantages of different research methods and the entry points for improving various algorithms are summarized. Among them, the papers which use kinematic and dynamical equations to consider the ship's trajectory motion planning for actual sea environments are reviewed. Faced with multiple moving obstacles, the literature related to multi-objective task assignment methods for path planning of USV swarms is reviewed. Therefore, the main contribution of this work is that it broadens the horizon of USV path planning and proposes future directions and research priorities for USV path planning based on existing technologies and trends. [ABSTRACT FROM AUTHOR]

In order to improve the effect of agricultural machinery task scheduling, this paper starts from the perspective of multiobjective optimization to achieve task scheduling based on multiobjective particle swarm optimization algorithm. The position of each particle is a combination of resource options for each construction activity, and the displacement range and speed range of the particles are determined. Moreover, this paper uses the method of introducing an external storage library to store the current noninferior solutions and uses the adaptive grid method and the roulette selection method to select the global optimal solution of the particles. In addition, this paper proposes a task scheduling algorithm suitable for modern agricultural machinery based on the actual needs of current agricultural machinery task scheduling. The experimental results show that the agricultural machinery task scheduling algorithm based on multiobjective optimization proposed in this paper has a good agricultural machinery task scheduling effect and meets the basic purpose of optimizing the algorithm in this paper. [ABSTRACT FROM AUTHOR]

Data Mining is a process of exploring the huge data in search of reliable patterns and methodical relationship among variables. As a result, the findings may be validated through applying the detected patterns to a novel subset of the data. In simple words, Data Mining is referred as extracting the useful information as large dataset and transforming into reliable structure for future use. Data Mining has shown its incredible performance in various fields to a greater extent, out of which, Educational Data Mining (EDM) is one among them. Many researchers have addressed huge number of problems in EDM and applied various techniques to reveal the useful and hidden information that helped in the process of decision making. Students getting employed during and after graduation are one of the important parts of their life. Students, based on their academic performances, are getting employed in companies they deserve. But still, the probability of getting employed is very less in this competitive world. In this paper, a real-time scenario has been chosen for analyzing various factors for getting employed/unemployed. Various clustering and classification techniques have been implemented and their performances are studied. A hybrid approach is presented in this paper that integrates the benefits of particle swarm optimization (PSO) and fuzzy clustering means (FCMs). The results obtained show that the proposed technique helps in obtaining higher accuracy to other clustering techniques. The proposed clustering algorithm PSO-FCM, accuracy is 34.4%, 36.45% and 28.45% higher than the existing method, time complexity shows 45%, 33% and 49% lower than the existing K -means clustering, Naïve Bayes clustering and SVM clustering algorithms, respectively. [ABSTRACT FROM AUTHOR]

The various applications of bearing-only sensor networks for detection and localization are becoming increasingly widespread and important. The array layout of the bearing-only sensor network seriously impacts the detection performance. This paper proposes a multi-strategy fusion improved adaptive mayfly algorithm (MIAMA) in a bearing-only sensor network to perform layout planning on the geometric configuration of the optimal detection. Firstly, the system model of a bearing-only sensor network was constructed, and the observability of the system was analyzed based on the Cramer–Rao Lower Bound and Fisher Information Matrix. Then, in view of the limitations of the traditional mayfly algorithm, which has a single initial population and no adaptability and poor global search capabilities, multi-strategy fusion improvements were carried out by introducing Tent chaos mapping, the adaptive inertia weight factor, and Random Opposition-based Learning. Finally, three simulation experiments were conducted. Through comparison with the Particle Swarm Optimization (PSO) algorithm, Mayfly Algorithm (MA), and Genetic Algorithm (GA), the effectiveness and superiority of the proposed MIAMA were validated. [ABSTRACT FROM AUTHOR]

Deepfakes are digital audio, video, or images manipulated using machine learning algorithms. These manipulated media files can convincingly depict individuals doing or saying things they never actually did. Deepfakes pose significant risks to our lives, including national security, financial markets, and personal privacy. The ability to create convincing deep fakes can also harm individuals' reputations and can be used to spread disinformation and fake news. As such, there is a growing need for reliable and accurate methods to detect deep fakes and prevent their harmful effects. In this paper, a hybrid convolutional neural network (CNN) and recurrent neural network (RNN) with a particle swarm optimization (PSO) algorithm is utilized to demonstrate a deep learning strategy for detecting deepfake videos. High accuracy, sensitivity, specificity, and F1 score were attained by the proposed approach when tested on two publicly available datasets: Celeb-DF and the Deepfake Detection Challenge Dataset (DFDC). Specifically, the proposed method achieved an average accuracy of 97.26% on Celeb-DF and an average accuracy of 94.2% on DFDC. The results were compared to other state-of-the-art methods and showed that the proposed method outperformed many. The proposed method can effectively detect deepfake videos, which is essential for identifying and preventing the spread of manipulated content online. [ABSTRACT FROM AUTHOR]

The objective of task allocation in unmanned systems is to complete tasks at minimal costs. However, the current algorithms employed for coordinating multiple unmanned systems in task allocation tasks frequently converge to local optima, thus impeding the identification of the best solutions. To address these challenges, this study builds upon the sheep flock optimization algorithm (SFOA) by preserving individuals eliminated during the iterative process within a prior knowledge set, which is continuously updated. During the reproduction phase of the algorithm, this prior knowledge is utilized to guide the generation of new individuals, preventing their rapid reconvergence to local optima. This approach aids in reducing the frequency at which the algorithm converges to local optima, continually steering the algorithm towards the global optimum and thereby enhancing the efficiency of task allocation. Finally, various task scenarios are presented to evaluate the performances of various algorithms. The results show that the algorithm proposed in this paper is more likely than other algorithms to escape from local optima and find the global optimum. [ABSTRACT FROM AUTHOR]

With the gradual emergence of customized manufacturing, intelligent manufacturing systems have experienced widespread adoption, leading to a surge in research interests in the associated problem of intelligent scheduling. In this paper, we study the flexible job shop scheduling problem (FJSP) with setup time, handling time, and processing time in a multi-equipment work center production environment oriented toward smart manufacturing and make-to-order requirements. A mathematical model with the optimization objectives of minimizing the maximum completion time, the total number of machine adjustments, the total number of workpieces handled and the total load of the machine is constructed, and an improved discrete particle swarm algorithm based on Pareto optimization and a nonlinear adaptive inertia weighting strategy is proposed to solve the model. By integrating the model characteristics and algorithm features, a hybrid initialization method is designed to generate a higher-quality initialized population. Next, three cross-variance operators are used to implement particle position updates to maintain information sharing among particles. Then, the performance effectiveness of this algorithm is verified by testing and analyzing 15 FJSP test instances. Finally, the feasibility and effectiveness of the designed algorithm for solving multi-objective FJSPs are verified by designing an FJSP test example that includes processing time, setup time and handling time. [ABSTRACT FROM AUTHOR]

Background: Cancer diagnosis based on machine learning has become a popular application direction. Support vector machine (SVM), as a classical machine learning algorithm, has been widely used in cancer diagnosis because of its advantages in high-dimensional and small sample data. However, due to the high-dimensional feature space and high feature redundancy of gene expression data, SVM faces the problem of poor classification effect when dealing with such data. Methods: Based on this, this paper proposes a hybrid feature selection algorithm combining information gain and grouping particle swarm optimization (IG-GPSO). The algorithm firstly calculates the information gain values of the features and ranks them in descending order according to the value. Then, ranked features are grouped according to the information index, so that the features in the group are close, and the features outside the group are sparse. Finally, grouped features are searched using grouping PSO and evaluated according to in-group and out-group. Results: Experimental results show that the average accuracy (ACC) of the SVM on the feature subset selected by the IG-GPSO is 98.50%, which is significantly better than the traditional feature selection algorithm. Compared with KNN, the classification effect of the feature subset selected by the IG-GPSO is still optimal. In addition, the results of multiple comparison tests show that the feature selection effect of the IG-GPSO is significantly better than that of traditional feature selection algorithms. Conclusion: The feature subset selected by IG-GPSO not only has the best classification effect, but also has the least feature scale (FS). More importantly, the IG-GPSO significantly improves the ACC of SVM in cancer diagnostic. [ABSTRACT FROM AUTHOR]

Today, the IoT has become a vital part of our lives because it has entered into the precise details of human life, like smart homes, healthcare, eldercare, vehicles, augmented reality, and industrial robotics. Cloud computing and fog computing give us services to process IoT tasks, and we are seeing a growth in the number of IoT devices every day. This massive increase needs huge amounts of resources to process it, and these vast resources need a lot of power to work because the fog and cloud are based on the term pay-per-use. We make to improve the performance and cost (PC) algorithm to give priority to the high-profit cost and to reduce energy consumption and Makespan; in this paper, we propose the performance and cost–gray wolf optimization (PC-GWO) algorithm, which is the combination of the PCA and GWO algorithms. The results of the trial reveal that the PC-GWO algorithm reduces the average overall energy usage by 12.17%, 11.57%, and 7.19%, and reduces the Makespan by 16.72%, 16.38%, and 14.107%, with the best average resource utilization enhanced by 13.2%, 12.05%, and 10.9% compared with the gray wolf optimization (GWO) algorithm, performance and cost algorithm (PCA), and Particle Swarm Optimization (PSO) algorithm. [ABSTRACT FROM AUTHOR]

As a structural indicator of dense subgraphs, k-core has been widely used in community search due to its concise and efficient calculation. Many community search algorithms have been expanded on the basis of k-core. However, relevant algorithms often set k values based on empirical analysis of datasets or require users to input manually. Once users are not familiar with the graph network structure, they may miss the optimal solution due to an improper k setting. Especially in attribute social networks, characterizing communities with only k-cores may lead to a lack of semantic interpretability of communities. Consequently, this article proposes a method for identifying the optimal k-core with the greatest attribute score in the attribute social network as the target community. The difficulty of the problem is that the query needs to integrate both structural and textual indicators of the community while fully considering the diversity of attribute scoring functions. To effectively reduce computational costs, we incorporate the topological characteristics of the k-core and the attribute characteristics of entities to construct a hierarchical forest. It is worth noting that we name tree nodes in a way similar to pre-order traversal and can maintain the order of all tree nodes during the forest creation process. In such an attribute forest, it is possible to quickly locate the initial solution containing all query vertices and reuse intermediate results during the process of expanding queries. We conducted effectiveness and performance experiments on multiple real datasets. As the results show, attribute scoring functions are not monotonic, and the algorithm proposed in this paper can avoid scores falling into local optima. With the help of the attribute k-core forest, the actual query time of the Advanced algorithm has improved by two orders of magnitude compared to the BaseLine algorithm. In addition, the average F1 score of our target community has increased by 2.04 times and 26.57% compared to ACQ and SFEG, respectively. [ABSTRACT FROM AUTHOR]

The prefabricated composite slab (PCS) is an essential horizontal component in a building, which is made of a precast part and a cast-in-place concrete layer. In practice, the floor should be split into many small PCSs for the convenience of manufacturing and installation. Currently, the splitting design of PCS mostly relies on sound knowledge and valuable experience of construction. While rule-based parametric design tools using building information modeling (BIM) can facilitate PCS splitting, the generated solution is suboptimal and limited. This paper presents an intelligent BIM-based framework to automatically complete the splitting design of PCSs. A collaborative optimization model is formulated to minimize the composite costs of manufacturing and installation. Individuals with similar area information are grouped into a subpopulation, and the optimization objective is to minimize the specifications and quantities of PCSs. Through the correlation information within the subpopulation and the shared information among each other, the variable correlation is eliminated to accomplish the task of collaborative optimization. The multipopulation coevolution particle swarm optimization (PSO) algorithm is implemented for the collaborative optimization model to determine the sizes and positions of all PCSs. The proposed framework is applied in the optimized splitting design of PCSs in a standard floor to demonstrate its practicability and efficiency. [ABSTRACT FROM AUTHOR]

In recent years, an increasing number of population-based metaheuristic algorithms have been proposed to solve the flexible job-shop scheduling problem (FJSP) according to its practicality and complexity. Most of these algorithms are single-population-based and hence are very susceptible to becoming trapped in local optimal values. Thus, multipopulation methods are widely used to improve these algorithms, resulting in multipopulation algorithms. These multipopulation algorithms have been widely studied in the context of single-layer complex networks recently. However, coupled networks used to control two (or more) algorithms simultaneously to get a better algorithm are always ignored in literature. Therefore, in this paper, using coupled scale-free networks (with different scaling exponents) to control the genetic algorithm (GA) and the invasive weed optimization (IWO) simultaneously, a multipopulation GA/IWO with coupled scale-free networks (MPGAIWO-SF) is proposed to solve FJSP. Then, we study how some parameters (e.g., subpopulation size, subpopulation number, and scaling exponent) of MPGAIWO-SF affect its performance, which is also ignored in literature. The simulation results illustrate that (1) the performance of MPGAIWO-SF is significantly improved compared with that of GA and IWO; (2) as the subpopulation size increases, the performance of MPGAIWO-SF first becomes better and then remains almost unchanged; (3) as the subpopulation number increases, the performance of MPGAIWO-SF first becomes better and then decreases rapidly; and (4) the performance of MPGAIWO-SF becomes worse slightly as the scaling exponent decreases. Finally, solving more FJSP instances, the MPGAIWO-SF with optimized parameters is compared with other related algorithms to verify its effectiveness. [ABSTRACT FROM AUTHOR]

The complex environments and weak infrastructure constructions of hilly mountainous areas complicate the effective path planning for plant protection operations. Therefore, with the aim of improving the current status of complicated tea plant protections in hills and slopes, an unmanned aerial vehicle (UAV) multi-tea field plant protection route planning algorithm is developed in this paper and integrated with a full-coverage spraying route method for a single region. By optimizing the crossover and mutation operators of the genetic algorithm (GA), the crossover and mutation probabilities are automatically adjusted with the individual fitness and a dynamic genetic algorithm (DGA) is proposed. The iteration period and reinforcement concepts are then introduced in the pheromone update rule of the ant colony optimization (ACO) to improve the convergence accuracy and global optimization capability, and an ant colony binary iteration optimization (ACBIO) is proposed. Serial fusion is subsequently employed on the two algorithms to optimize the route planning for multi-regional operations. Simulation tests reveal that the dynamic genetic algorithm with ant colony binary iterative optimization (DGA-ACBIO) proposed in this study shortens the optimal flight range by 715.8 m, 428.3 m, 589 m, and 287.6mcompared to the dynamic genetic algorithm, ant colony binary iterative algorithm, artificial fish swarm algorithm (AFSA) and particle swarm optimization (PSO), respectively, for multiple tea field scheduling route planning. Moreover, the search time is reduced by more than half compared to other bionic algorithms. The proposed algorithm maintains advantages in performance and stability when solving standard traveling salesman problems with more complex objectives, as well as the planning accuracy and search speed. In this paper, the research on the planning algorithm of plant protection route for multi-tea field scheduling helps to shorten the inter-regional scheduling range and thus reduces the cost of plant protection. [ABSTRACT FROM AUTHOR]

Physical exercise for college students is an important means to build a healthy standard of college students and an important way to a healthy campus. In addition to creating good physical fitness, physical exercise has significant effects on improving psychological stress and alleviating psychological problems and mental illnesses among college students. It is important to predict and analyze the physical exercise behavior of college students and explore the positive value of physical exercise for college education. In order to overcome the problem of low accuracy of traditional algorithms in prediction, this paper uses the improved gray wolf algorithm (IGWO) and support vector machine (SVM) for predictive analysis of college students' physical exercise behavior. A nonlinear decreasing convergence factor strategy and an inertia weight strategy are introduced to improve the gray wolf optimization algorithm, which is used to determine the SVM parameters for the purpose of improving the model accuracy. Then, the college students' physical exercise data are input into the model for validation. By constructing a campus behavior data set of college students and conducting experiments, the algorithm achieves 90.45% behavior prediction accuracy, which is better than that of typical prediction models. Finally, individual growth monitoring of college students is targeted to warn students with abnormal behaviors. At the same time, the higher-order information such as physical exercise behavior habits of college students is explored to provide meaningful reference for constructing personalized training. [ABSTRACT FROM AUTHOR]

In recent years, the incidence of diabetes has been increasing year by year. Since most of the fundus lesions are located near blood vessels, the image information is complex, and the end vessels are difficult to identify. So, a new segmentation method of diabetic retinal vessel images based on particle swarm optimization and salp swarm algorithm is proposed. This paper uses a Gaussian filter to enhance the main blood vessels, and a top-bot hat transform is used to strengthen the end vessels. The preprocessing process is completed by combining and reconstructing the two images through a normalization operation. The improved particle swarm optimization and salp swarm algorithms perform multi-threshold segmentation on the preprocessed vessel images. The best fit value, Structural Similarity Index Measure, Peak Signal to Noise Rati, feature similarity index measure, sensitivity, accuracy, regional consistency, Dice coefficient, Jaccard similarity, and Shannon entropy are selected for comprehensive evaluation and analysis. The results showed that this paper's improved particle swarm-salp swarm algorithm for segmenting diabetic retinal blood vessel images is more efficient, and the threshold is better. The vascular segmentation method in this paper is applied in medical image processing, which improves the accuracy of medical image processing and reduces the computational effort. [ABSTRACT FROM AUTHOR]

Aiming at the resource optimization problem in the cooperative detection task, the objective function is constructed based on the channel capacity, and the artificial bee colony (ABC) algorithm is improved to realize the joint optimization of the UAV swarm trajectory and radiation power. Firstly, a multiple input multiple output (MIMO) cooperative detection model is constructed. Then, based on the perspective of information theory, the channel capacity of the cooperative detection model is derived and used as the objective function for optimizing the detection resources of UAV swarm. Then, the factors affecting the objective function are sorted out and analyzed one by one, and the constraints are clarified. Aiming at the shortcomings of ABC algorithm, its search strategy and parameter optimization method are improved. A joint optimization process of UAV swarm trajectory and radiated power based on improved ABC algorithm is constructed. Finally, through simulation verification and algorithm comparison, it shows that the algorithm in this paper can improve the perception ability of cooperative detection of UAV swarm. [ABSTRACT FROM AUTHOR]

Aiming at the problems of low path success rate, easy precocious maturity, and easily falling into local extremums in the complex environment of path planning of mobile robots, this paper proposes a new particle swarm algorithm (RDS-PSO) based on restart strategy and adaptive dynamic adjustment mechanism. When the population falls into local optimal or premature convergence, the restart strategy is activated to expand the search range by re-randomly initializing the group particles. An inverted S-type decreasing inertia weight and adaptive dynamic adjustment learning factor are proposed to balance the ability of local search and global search. Finally, the new RDS-PSO algorithm is combined with cubic spline interpolation to apply to the path planning and smoothing processing of mobile robots, and the coding mode based on the path node as a particle individual is constructed, and the penalty function is selected as the fitness function to solve the shortest collision-free path. The comparative results of simulation experiments show that the RDS-PSO algorithm proposed in this paper solves the problem of falling into local extremums and precocious puberty, significantly improves the optimization, speed, and effectiveness of the path, and the simulation experiments in different environments also show that the algorithm has good robustness and generalization. [ABSTRACT FROM AUTHOR]

The quality of rolling bearings is vital for the working state and rotation accuracy of the shaft. Timely and accurately acquiring bearing status and early fault diagnosis can effectively prevent losses, making it highly practical. To improve the accuracy of bearing fault diagnosis, this paper proposes a CNN-LSTM bearing fault diagnosis model optimized by hybrid particle swarm optimization (HPSO). The HPSO algorithm has a strong global optimization ability and can effectively solve nonlinear and multivariate optimization problems. It is used to optimize and match the parameters of the CNN-LSTM model and dynamically find the optimal value of the parameters. This model overcomes the problem that the parameters of the CNN-LSTM model depend on empirical settings and cannot be adjusted dynamically. This model is used for bearing fault diagnosis, and the accuracy rate of fault diagnosis classification reaches 99.2%. Compared with the traditional CNN, LSTM, and CNN-LSTM models, the accuracy rates are increased by 6.6%, 9.2%, and 5%, respectively. At the same time, comparing the models with different optimization parameters shows that the model proposed in this paper has the highest accuracy. The experimental results verified the superiority of the HPSO algorithm to optimize model parameters and the feasibility and accuracy of the HPSO-CNN-LSTM model for bearing fault diagnosis. [ABSTRACT FROM AUTHOR]