Search

The nonconformal domain decomposition methods (DDMs) of the hybrid finite element-boundary integral-multilevel fast multipole algorithm (FE-BI-MLFMA) are presented for computing large electromagnetic scattering/radiation problems. The numerical performance of different transmission conditions between finite element method (FEM) subdomains, and FEM and BI domains is studied in this paper. The Dirichlet transmission condition (DTC) employed at the interface between FEM and BI domains has faster convergence than the Robin-type transmission condition, and this finding is different from the conclusions for the FEM DDMs published in the literature. Furthermore, the cement-element (CE)-based dual-primal finite element tearing and interconnecting (FETI-DP) DDM has faster convergence than the Lagrange-multiplier-based FETI-DP method under the FE-BI system, and is also different from that under the system of the FEM with the absorbing boundary condition (FEM-ABC). It shows that the DDMs of FE-BI-MLFMA have some essential differences from those of FEM-ABC. The analysis of these numerical phenomena is presented in this paper. Further comparison between the DDMs of FE-BI-MLFMA and FEM-ABC demonstrates that the DDMs of FE-BI-MLMFA have essential advantages over those of FEM-ABC. Various numerical experiments confirm the accuracy, efficiency, and flexibility of the nonconformal DDM of FE-BI-MLFMA, which is the CE-based FETI-DP DDM with DTC connecting FEM and BI. [ABSTRACT FROM AUTHOR]

The aim of this paper is to highlight the capabilities of a new hybrid analytical modeling (HAM) approach for the analysis and design of various electromagnetic structures. After an introduction, where the aim of the development of this modeling approach is presented, the modeling approach is described. The new HAM is based on a strong coupling of the magnetic equivalent circuits method and analytical models (AMs). The AM, based on the formal solution of Maxwell’s equations, is established thanks to the separation of variables method. The HAM is applied to different permanent magnet electric machine structures, and the results are validated extensively by comparison with the finite-element analyses. [ABSTRACT FROM AUTHOR]

In this paper, the characteristics of the electromagnetic noise radiated by an external rotor in-wheel motor (IWM) are investigated with the Doppler effect taken into consideration. First, Maxwell stress tensor method is employed to derive electromagnetic forces on the magnet surface. The effect of common current harmonics is also analyzed. Then, a structural model of the rotor is built and modal test is conducted to validate the model. Nodal forces, which are calculated by finite element method, are transferred from the electromagnetic mesh to the structural model for further vibration prediction. Finally, boundary element method is used to calculate the noise radiated by the rotor. In particular, the Doppler effect is considered. The calculated results are validated by the noise test. It is found that the end cap contributes more to the overall noise than the shell, and obvious sound directivity appears in the noise of the IWM. The noise measured perpendicular to the outer end cap is larger than that measured in other directions. In addition, the Doppler effect would induce additional side-frequency components around high-frequency peaks in the external rotor motor. [ABSTRACT FROM PUBLISHER]

This paper deals with some aspects of formulation and implementation of a broadband algorithm with build-in analysis of some dispersive media. The construction of the finite element method (FEM) based on direct integration of Maxwell's equations and solution of some additional convolution integrals is presented. The broadband, fractional model of permittivity is approximated by a set of some relaxation sub-models. The properties of the 3D time-dependent formulation of the FEM algorithm are determined using a benchmark problem with the Cole-Cole and the Davidson-Cole models. Several issues associated with the implementation and some constraints of the broadband finite element algorithm are presented. [ABSTRACT FROM AUTHOR]

This paper describes iterative methods for the high frequency electromagnetic analysis using the finite element method of Maxwell equations including displacement current. The conjugate orthogonal conjugate gradient method has been widely used to solve a complex symmetric system. However, the conventional method suffers from oscillating convergence histories in large-scale analysis. In this paper, to solve large-scale complex symmetric systems arising from the formulation of the E method, an iterative substructuring method like the minimal residual method is presented, and the performance of the convergence of the method is evaluated by numerical results. As the result, the proposed method shows a stable convergence behavior and a fast convergence rate compared to other iterative methods. [ABSTRACT FROM AUTHOR]

The interaction between an ensemble of cylinders and an inhomogeneous plane wave is introduced and is determined, in the present paper, through a rigorous theoretical approach. Scattered electromagnetic field generated by an indefinite number of infinite circular cylinders is analyzed by the application of the generalized vector cylinder harmonics (VCH) expansion. The exact mathematical model relied upon to represent this scenario considers the so-called complex-angle formalism reaching a superposition of vectorial cylindrical-harmonics and Foldy-Lax Multiple scattering equations (FLMSE) to account for the multi-scattering process between the cylinders. The method was validated by comparing the numerical results obtained with the use of the finite element method and a homemade Matlab code. [ABSTRACT FROM AUTHOR]

A new discontinuous Galerkin time-domain (DGTD) method based on generalized sheet transition conditions (GSTCs) for analyzing the transient response of electromagnetic metasurfaces is presented. The discontinuities in electromagnetic fields around the vicinity of the metasurface are modeled by placing virtual edges on both sides of the metasurface. The GSTCs are incorporated in the updating equations of the standard DGTD algorithm by integrating the time-domain GSTCs formula with Galerkin’ s-weighted residual method. The DGTD-GSTC formulation can also simulate a bf piecewise linear approximation of a curved metasurfaces due to the unstructured mesh. This is the first time that DGTD is applied to the simulation of GSTCs. The implementation of this new method is verified by numerical cases. [ABSTRACT FROM AUTHOR]

Introduction. The complexity of the theoretical description of the magnetic pulse treatment of the material is in the mutual coupled processes of electromagnetic and thermal fields with plastic deformation of the material and processes in an electrical circuit. The paper deals with the combined transient mathematical model of the system of equations of the electromagnetic field, theory of elasticity, thermal conductivity and electrical circuit. Purpose. Research and testing of the developed mathematical model and assess the impact of various parameters on the process of deformation of the work piece. Methodology. Investigation of nonlinear mathematical model is carried out by the finite element method using a special software package. Results. The resulting solution of the transient mathematical model allows studying the influence of parameters of the circuit, the speed and the characteristics of the material to plastic deformation and heating of the work piece, which allows to select the optimum process parameters. Originality. This is an integrated approach to the development of a mathematical model, which includes the electromagnetic field equations, the theory of elasticity, thermal conductivity and electrical circuit equations with a storage capacitor. Conclusions. A comprehensive mathematical model and its solution are obtained. It is established a small effect of heating temperature on the amount of strain. Currents caused by movement of the work piece must be taken into account in the calculations. Inertial forces significantly affect the nature of the deformation. During the deformation it is necessary to consider the nonlinearity of elasticity modulus. Thermal deformation of the work piece is much less mechanical strain and opposite in sign to them, but the surface temperature stresses due to the high temperature gradient equal to 20 % of the yield strength of the work piece. [ABSTRACT FROM AUTHOR]

Copyright of Technical Electrodynamics / Tekhnichna Elektrodynamika is the property of National Academy of Sciences of Ukraine, Institute of Electrodynamics and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

We propose an approach to solving multisource induction logging problems in multidimensional media. According to the type of induction logging tools, the measurements are performed in the frequency range of 10 kHz to 14 MHz, transmitter-receiver offsets vary in the range of 0.5-8 m or more, and the trajectory length is up to 1 km. For calculating the total field, the primary-secondary field approach is used. The secondary field is calculated with the use of the finite-element method (FEM), irregular non-conforming meshes with local refinements and a direct solver. The approach to constructing basis functions with the continuous tangential components (from Hcurl(Ω) on the non-conforming meshes from the standard shape vector functions is developed. On the basis of this method, the algorithm of generating global matrices and a vector of the finite-element equation system is proposed. We also propose the method of grouping the logging tool positions, which makes it possible to significantly increase the computational effectiveness. This is achieved due to the compromise between the possibility of using the 1-D background medium, which is very similar to the investigated multidimensional medium for a small group, and the decrease in the number of the finite-element matrix factorizations with the increasing number of tool positions in one group. For calculating the primary field, we propose the method based on the use of FEM. This method is highly effective when the 1-D field is required to be calculated at a great number of points. The use of this method significantly increases the effectiveness of the primary-secondary field approach. The proposed approach makes it possible to perform modelling both in the 2.5-D case (i.e. without taking into account a borehole and/or invasion zone effect) and the 3-D case (i.e. for models with a borehole and invasion zone). The accuracy of numerical results obtained with the use of the proposed approach is compared with the one obtained by other codes for 1-D and 3-D anisotropic models. The results of this comparison lend support to the validity of our code. We also present the numerical results proving greater effectiveness of the finite-element approach proposed for calculating the 1-D field in comparison with the known codes implementing the semi-analytical methods for the case in which the field is calculated at a large number of points. Additionally, we present the numerical results which confirm the accuracy advantages of the automatic choice of a background medium for calculating the 1-D field as well as the results of 2.5-D modelling for a geoelectrical model with anisotropic layers, a fault and long tool-movement trajectory with the varying dip angle. [ABSTRACT FROM AUTHOR]