Search

The combined production of electricity and thermal energy (combined heat and power or co-generation) is the most efficient and convenient approach to reduce costs for energy at industrial power plants and district heating plants that use natural gas as fuel to produce thermal energy for various needs. This paper analyses the operational characteristics of the combined heat and power plant, which has been operating since January 1, 2021, at the Voždovac Heating Plant as part of the Belgrade district heating system. The combined heat and power plant consists of three gas engine units with a total nominal electric power of 10 MW and thermal power of 10.1 MW, which use natural gas as fuel. The combined heat and power plant is used for district heating and preparing domestic hot water while electricity is sold to the local electric grid. The analysis in this paper focuses on the plant's operational characteristics: the number of working hours, the total energy consumption and energy production, the efficiency as well as the operational and maintenance costs. Also, the impact of the drastic changes in the prices of natural gas, electricity, and maintenance costs in the last year on the financial profitability of the combined heat and power plant was analysed in particular. [ABSTRACT FROM AUTHOR]

In view of the prominent and intractable problems of frequent high temperature alarms of the communication equipment and high energy consumption of air conditioners in Zhengzhou communication outdoor cabinets, a temperature control system with heat pipe as the main part and air conditioner as the auxiliary part is proposed in this paper. A prototype is developed and its applications are discussed. The annual field test shows the system works well, and it has a remarkable energy saving efficiency. [ABSTRACT FROM AUTHOR]

The supercritical CO2 power cycle driven by solar as a new generation of solar thermal power generation technology has drawn significant attention worldwide. In this paper, a cogeneration system derived from a supercritical CO2 recompression Brayton cycle is proposed, by considering the recovery of waste heat from the turbine outlet. The absorption refrigeration cycle is powered by the medium-temperature waste heat from the turbine outlet, while the low-temperature waste heat is employed for heating, achieving the cascaded utilization of the heat from the turbine outlet. As for the proposed combined cooling, heating, and power (CCHP) system, a dynamic model was built and verified in MATLAB R2021b/Simulink. Under design conditions, values for the energy utilization factor (EUF) and exergy efficiency of the cogeneration system were obtained. Moreover, the thermodynamic performances of the system were investigated in variable cooling/heating load and irradiation conditions. Compared with the reference system, it is indicated that the energy utilization factor (EUF) and exergy efficiency are 84.7% and 64.8%, which are improved by 11.5% and 10.3%. The proposed supercritical CO2 CCHP system offers an effective solution for the efficient utilization of solar energy. [ABSTRACT FROM AUTHOR]

With the progress of modern times, automobile technology has become integral to human society. At the same time, the need for energy has also grown. In parallel, the total amount of waste energy that is liberated from different parts of the automobile has also increased. In this ever-increasing energy demand pool, future energy shortages and environmental pollution are the primary concerns. A thermoelectric generator (TEG) is a promising technology that utilizes waste heat and converts it into useful electrical power, which can reduce fuel consumption to a significant extent. This paper comprehensively reviews automobile thermoelectric generators and their technological advancements. The review begins by classifying different waste heat technologies and discussing the superiority of TEGs over the other existing technologies. Then, we demonstrate the basic concept of and advancements in new high-performance TEG materials. Following that, improvements and associated challenges with various aspects, such as the heat exchanger design, including metal foam, extended body, intermediate fluid and heat pipe, leg geometry design, segmentation, and multi-staging, are discussed extensively. Finally, the present study highlights research guidelines for TEG design, research gaps, and future directions for innovative works in automobile TEG technologies. [ABSTRACT FROM AUTHOR]

This paper presents the concept of an innovative control of a central heating system in a multifamily building based on the original thermodynamic model, the resulting architecture of the control system, and the originally designed and manufactured wireless temperature sensors for thermal zones. The novelty of this solution is the developed layers of the control system: distributed measurement and correction analysis, which is based on the existing infrastructure and the local HVAC controller. This approach allows for the effective use of the measured temperature data from thermal zones and finally sending the value of the calculated correction of settings to the controller. Moreover, in the analytical layer, a model was also implemented that calculates the necessary amount of energy based on data from the subsystem of temperature sensors located in the thermal zones of the building. The use of the algorithmic strategy presented in this paper extends the functionality and significantly improves the energy efficiency of the existing, classic, reference heating control algorithm by implementing additional control loops. Additionally, it enables integration with demand-side response systems. The presented concept was successfully tested, achieving real energy savings for heating by 12%. These results are described in a case-study format. The authors believe that this concept can be used in other buildings and thus will have a positive impact on the energy savings used to maintain thermal comfort in buildings and significantly reduce CO2 emissions. [ABSTRACT FROM AUTHOR]

With the continuous development of the Internet of Things (IoT) and new energy utilization technology, the energy management and monitoring mode has undergone fundamental changes. Design and development of remote real-time monitoring and management system for multi-energy heat collection has certain theoretical and practical application value. The existing remote temperature control model fully considers neither the impact of multi-energy collaborative heat collection on remote temperature control strategy, nor the interactions among multiple objective factors, such as climate and location. Therefore, this paper studied the remote temperature control strategy of multi-energy heat collection based on the IoT. First, the paper gave the application architecture of multi-energy heat collection system functions, and developed a multi-energy heat collection system model without simulation performance loss using stochastic modeling ideas. Second, this paper made full use of the error information of the process, thus correcting the predicted value of the remote temperature control output. Finally, the experimental results verified the effectiveness of the model and the control strategy. [ABSTRACT FROM AUTHOR]

Predictive control has great potential in the home energy management domain. However, such controls need reliable predictions of the system dynamics as well as energy consumption and generation, and the actual implementation in the real system is associated with many challenges. This paper presents the implementation of predictive controls for a heat pump with thermal storage in a real single-family house with a photovoltaic rooftop system. The predictive controls make use of a novel cloud camera-based short-term solar energy prediction and an intraday prediction system that includes additional data sources. In addition, machine learning methods were used to model the dynamics of the heating system and predict loads using extensive measured data. The results of the real and simulated operation will be presented. [ABSTRACT FROM AUTHOR]

This research provides a comprehensive exploration of energy efficiency dynamics in non-residential public buildings such as schools, swimming pools, hospitals, and museums. Recognizing the distinct energy consumption patterns of each building type, the study accentuates the unique challenges they present, with a particular focus on the continuous and intensive energy demands of hospitals and the unparalleled energy needs of swimming pools. Through an extensive review of various case studies, the research unveils prevailing energy consumption trends, highlighting the role of metrics in assessing energy efficiency and the inherent challenges these metrics face in ensuring uniformity and direct comparability. A core element of this analysis emphasizes the dual nature of technical retrofitting, categorizing interventions into passive and active measures. The research delves into the sustainability imperatives of energy interventions, exploring the economic motivations underpinning retrofit decisions, and the intricate relationship between advanced technological solutions and the behavioral tendencies of building operators and users. Additionally, the study uncovers the influence of external determinants such as climatic factors and government policies in shaping energy consumption in public buildings. In synthesizing these findings, the paper offers insightful recommendations, emphasizing the need for an integrated approach that harmonizes technological innovations with informed operational habits, aiming to optimize energy efficiency in public non-residential buildings. [ABSTRACT FROM AUTHOR]

The energy efficiency of a system and the performance level of its equipment and installations are the two key elements based on which the investment decision in its modernization is made. They are also very important for setting up optimal operation strategies. The energy audit is a well-known and worldwide recognized tool for calculating energy performance indicators and developing improvement measures. This paper is a synthesis of the energy audit results performed for a district heating network that uses geothermal energy as its primary source of energy. The location of the heating system is inside a university campus. The first part explains the necessity of a comprehensive study on district heating networks and introduces the defining elements that characterize the analyzed equipment and installations. The complex energy balance methodology that has been developed and applied to this district heating system is presented in the second part of the paper. Next, the methodology for collecting the input data for the energy and mass balance is explained. In the final part, the numerical values of the performance indicators and the technical measures that must be applied to improve energy efficiency are shown, and conclusions are drawn. [ABSTRACT FROM AUTHOR]

Adding water to fuel droplets is known to lead to puffing and micro-explosion. Puffing and micro-explosion lead to a rapid increase in the liquid fuel surface area. This, in turn, leads to an increase in the fuel evaporation rate and the formation of a homogeneous fuel vapor/air mixture. The latter is important for improving the efficiency of combustion technologies, including those used in internal combustion engines. The effects produced by puffing and micro-explosion lead to a reduction in fuel consumption, improved fuel/air mixing, and a reduction in harmful emissions. The contributions of puffing and micro-explosion to fire extinguishing have also been discussed in many papers. In this paper, we review the state of the art in the investigation of composite droplet micro-explosion and discuss the sufficient conditions for the start of puffing/micro-explosion as well as child droplet characteristics. [ABSTRACT FROM AUTHOR]

Combined heat and power (CHP) plants are known as efficient technologies to reduce environmental emissions, balance energy costs, and increase total energy efficiency. To obtain a more efficient system, various optimization methods have been employed, based on numerical, experimental, parametric, and algorithmic optimization routes. Due to the significance of algorithmic optimization, as a systematic method for optimizing energy systems, this novel review paper is focused on the meta-heuristic optimization algorithms, implemented in CHP energy systems. By considering the applied objective functions, the main sections are divided into single-objective and multi-objective algorithms. In each case, the units' combination is briefly detailed, the objective functions are introduced, and analyses are conducted. The main aim of this paper is to gather a database for the optimization of CHPs, demonstrate the effect of the applied optimization methods on the objective functions, and finally, introduce the most efficient methods. The most significant feature of this paper is that it covers all types of CHP optimization issues including scheduling, sizing, and designing problems, finding the extent of each optimization issue in the relevant papers in the last decade. Based on the findings, in the single-objective problems the combined heat and power economic dispatch (CHPED) issue as a subcategory of the scheduling problems is introduced as the most paid topic; the designing issue is known as the lowest paid topic. In the multi-objective problems, working on various types of CHP optimization problems has been conducted with an almost similar share. The combined heat and power economic emission dispatch (CHPEED) problem with the most share, and the sizing issue with the lowest share. The CHP designing and sizing optimization issues could be introduced as topics to work on more in the future. Additionally, the numerical results of CHPED and CHPEED problems solved by various algorithms are presented and compared. In this regard, specified test systems are considered. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive analysis of public procurement documents in the domain of university buildings taken from the e-procurement platform, particularly focusing on their transformation towards more efficient energy consumption. Using a corpus of the titles of the public procurement documents from 2020 to 2022, we used Latent Dirichlet Allocation (LDA) for topic modeling to understand the key thematic areas of focus. The methodology presented in this study incorporated a bifurcated approach. This two-stage procedure began with preprocessing and dictionary creation from the corpus of titles of procurement documents. Following this, the Latent Dirichlet Allocation (LDA) model was employed for topic extraction and trend analysis, thereby providing a comprehensive understanding of the thematic progression in procurement practices over time. Our analysis revealed a shift in emphasis from modernization towards the adoption of energy-saving technologies as well as a growing focus on broader sustainability initiatives. However, a less prevalent topic was adherence to cooling & heating systems, suggesting potential areas for improvement in procurement practices. These findings contribute to the growing body of knowledge on sustainable procurement in university buildings and offer valuable insight for universities to enhance their energy efficiency strategies. [ABSTRACT FROM AUTHOR]

The on-spot consumption scheme of new energy can improve the utilization efficiency of energy and provide references for the transformation from the conventional regional coal heating mode to the more efficient electric heating mode. To figure out the economic benefit brought by the new energy heating mode, it's necessary to evaluate its cost-benefit and construct reasonable model to study the dynamic market response. Therefore, this paper aims to evaluate the comprehensive cost benefit of the investment and operation of new energy heating (NEH) system and find ways to improve the said cost benefit. At first, this paper built an investment and operation model for the said NEH system, and constructed an objective function with the minimization of new energy disuse rate as the objective in the commissioned operation scheme for new energy on-spot consumption system connected with large electric heating boiler and large-capacity heat accumulator. Then, the paper gave the structure of the NEH system, and analyzed the main participants, investment and operation modes, and economic benefit of the NEH system. At last, corresponding experimental results and analysis results of an example case were given, which had verified the effectiveness of the proposed model. [ABSTRACT FROM AUTHOR]

The integration of wastewater heat pumps (using purified water) in district heating systems is analyzed in this paper. The simulation procedure is proposed to analyze the impacts of stochasticity of purified water temperature and flow to heat pump integration and operation. The analysis includes calculation of the daily and seasonal coefficient of performance, as well as fossil fuel savings and CO2 emission reduction due to wastewater heat pump use. The proposed procedure is implemented for the case study in the city of Šabac (Serbia) and obtained results are discussed and evaluated. The historical data for two heating seasons was used for simulation. It was shown that the wastewater heat pump could provide 27-28% savings in fuel consumption, and 3.6-4.1% GHG emissions reduction, while the seasonal COP could be 4.2 - 4.3. Simulation based approach shows approximately 40% less savings of fuel consumption, compared to the approach based on the average values of heat pump input parameters. [ABSTRACT FROM AUTHOR]

In this paper we aim to make a comparison between three types of heat pumps: air-to-water, water-to-water, ground-to-water. We show that, from a construction point of view, the difference between the three types of heat pumps is the source from which the additional heat is extracted. We point out that the heat pump is the installation that transfers heat from a colder medium to a warmer medium. Most often, pumps extract heat from water, air or ground/geothermal sources and transfer it into the home via underfloor heating, radiators, etc. Any decision to install heat pump equipment must be carefully considered, taking into account all four elements (energy consumption, installation costs, existence of the chosen heat source and its accessibility) that influence the technical and economic efficiency and the proper functioning of the equipment. [ABSTRACT FROM AUTHOR]

Phase change materials (PCMs) proved to be valuable and drew the attention of numerous scientists striving to establish novel techniques to minimize energy consumption and expand heat storage; yet a number of challenges hampered their research. This paper provides an overall overview on how to overcome those constraints by adapting nano-enhanced phase change materials, the motivation behind their investigation, their advantages, area of applications, and their impact on thermal management and storage equipment. Recent computational and experimental studies have revealed that nanoparticles are extremely useful in terms of improving the thermo-physical properties of PCMs, allowing nano-PCMs, mainly nano-paraffin, to have a major positive influence on thermal concepts at the economical, ecological, and effectiveness levels. In this context, nano-enhanced PCMs are now able to store and release large amounts of heat in short intervals of time, which is relevant to thermal storage systems and contributes to augmenting and boosting their efficiency. It also improves the thermal performance of cooling and heating systems in buildings and regulates the operating temperature of PV systems, electronic components, and batteries. [ABSTRACT FROM AUTHOR]

The drying and heating system (DHS) is the core component of automatic stirring equipment, so analyzing its thermodynamics is crucial for improving the efficiency of the equipment. However, existing empirical thermodynamic formulas generally take certain working conditions as prerequisites, and substituting relevant parameters of DHS into calculation can cause large errors. In view of this problem, this paper attempts to perform thermodynamic analysis and calculation on the DHS of automatic stirring equipment. At first, the material ratio of the automatic stirring equipment was analyzed in the text, and the drying and heating process of mixture was divided into three stages: mixture preheating, mixture drying, and heating mixture to the working temperature. Then, the heat consumption of DHS, the heat consumption of fuel combustion, the consumption rate of the fuel, and the heat efficiency of DHS were measured and calculated. At last, the thermodynamic analysis results of DHS of automatic stirring equipment were given, and the measurement and calculation methods adopted in the paper were proved to be effective. [ABSTRACT FROM AUTHOR]

This paper examines the issue of strategic planning of fuel supplies in combined heat and power systems. This is a major challenge in energy modeling because heating-degree day calculation methods only address short-term horizons and are not suitable for the long-term planning of fuel supplies. In this work, a comprehensive method is proposed for strategic fuel supply planning of independent heat producers. The method considers changes in the market dynamics of residential and commercial properties, the annual rate of customer acquisition by the network operator, customer disconnections, as well as the thermal modernization of buildings for estimating the long-term thermal energy demand of an urban area. Moreover, the method develops a mathematical model to minimize production costs, taking into account the technical constraints of the system. The proposed strategic planning tool, in addition to information on the quantities of fuel consumed for heat and electricity production, also provides valuable management information on the operational costs of the CHP system and its environmental impact. The application of the method is illustrated with the analysis of a large-scale combined heat and power plant supplying heat and electricity to a city with over 500,000 inhabitants. The results indicate that depending on the changes in the primary and secondary heat markets, the demand for energy carriers may range from 107.37 TWh to 119.87 TWh. [ABSTRACT FROM AUTHOR]

In the progressively rising decentralized energy market, micro gas turbines (MGT) are seen with great potential owing to their low emissions, fuel flexibility, and low maintenance. The current transformation in the landscape of electricity supply with an increasing share of fluctuant renewable energy resources and increasing complexity requires a reliable and energy-efficient power generation source to support the grid. In this scenario, small-scale power plants that are constructed based on micro gas turbines with up to 250 kW power range can play a substantial role in meeting the challenges of the modern electricity grid. Micro gas turbines provide a reliable and cost-effective power source with a quick load-following ability which can respond to demand peaks and compensate for intermittent renewable sources when they are not available. MGT units can work as a system together with renewables, or function as a stand-alone unit in off-grid operations. The features of micro gas turbines are compatible with the energy transition that is the carbon-free modern energy grid. The technology underlying MGTs offer hybridization with renewable energy sources, flexibility in operations and type of fuel, and promising low emission solutions that align with environmental concerns. However, there is a continuous need to improve energy efficiency with a pressing urge for reducing emissions. This paper provides a review of micro gas turbines' characteristics which promote their role in future power and heat generation systems. A brief overview of the challenges to improving operational flexibility, reliability, and availability of MGTs while maintaining low environmental impact and lowering the costs is presented. A model for an active monitoring and control system of the micro gas turbines is proposed which could improve the reliability of MGT operation in the grid by means of AI methods. [ABSTRACT FROM AUTHOR]

The energy conservation of campus buildings is the most direct and effective means to promote the sustainable development of colleges and universities. Using the heat data collected by heat supply monitoring platform to perform real-time energy consumption analysis and heating energy efficiency evaluation is a prerequisite for realizing automatic heat supply control based on energy conservation and heating demand. This paper studied the energy conservation analysis and comprehensive energy efficiency evaluation of campus central heating system based on the heat supply monitoring platform. At first, the paper elaborated on the energy consumption analysis method of the campus central heating system based on the heat supply monitoring platform; then, it gave the energy balance equation and the exergy balance equation; after that, based on a few parameters such as the EHR (electricity to heat ratio), heating index, and water makeup rate, this paper evaluated the energy efficiency of the campus central heating system, and experimental results verified the effectiveness of the analysis and evaluation methods. [ABSTRACT FROM AUTHOR]

Many European and some other developed countries have addressed the use of geothermal energy systems as a renewable source of energy worthy of investment and development. Geothermal energy is a non-intermittent and potentially inexhaustible source that can be used for energy saving and environmental energy production, as well as to provide heating and cooling to buildings, by increasing the energy efficiency of conventional systems. This editorial paper collects the most significant and recent studies, dealing with geothermal source exploitation, the possible role of geothermal systems in the building retrofit measures, the use of shallow geothermal sources, and specific aspects of systems that exploit geothermal energy. [ABSTRACT FROM AUTHOR]

Northern China is vigorously promoting cogeneration and clean heating technologies. The accurate prediction of building energy consumption is the basis for heating regulation. In this paper, the daily, weekly, and annual periods of building energy consumption are determined by Fourier transformation. Accordingly, a period-based neural network (PBNN) is proposed to predict building energy consumption. The main innovation of PBNN is the introduction of a new data structure, which is a time-discontinuous sliding window. The sliding window consists of the past 24 h, 24 h for the same period last week, and 24 h for the same period the previous year. When predicting the building energy consumption for the next 1 h, 12 h, and 24 h, the prediction errors of the PBNN are 2.30%, 3.47%, and 3.66% lower than those of the traditional sliding window PBNN (TSW-PBNN), respectively. The training time of PBNN is approximately half that of TSW-PBNN. The time-discontinuous sliding window reduces the energy consumption prediction error and neural network model training time. [ABSTRACT FROM AUTHOR]

Putting glass doors on the display cases of refrigerators is one of the most efficient ways to reduce the energy consumption of supermarkets. However, the glass fogs up when opening the door because of the difference in air temperature inside and outside of the refrigerator, thereby obscuring the view. To defog the glass, anti-sweat heaters (ASHs) are used. In this paper, the power usage of ASHs according to changes in the dew point (DP) inside a supermarket were evaluated for two types of ASH, i.e., the door-frame ASH and the glass ASH. The evaluation was based on measurements of the condensation on the glass doors of vertical display cases, used for the preservation of frozen foodstuffs. A mathematical model of the correlation between the ASH's power usage and the DP was developed and used for predicting the long-term energy savings. The savings were calculated based on the measured DPs inside the supermarket, which were extrapolated over a longer time period based on their correlation with the outside DPs. Regulating the door-frame ASH according to the DP resulted in an 84.6% reduction in energy consumption and a 90.1% reduction in the case of the glass ASH, compared to the current state. The correlation between the DPs inside and outside the supermarket served as a basis for the proposed implementation of the power usage regulation of the ASH according to the DP. [ABSTRACT FROM AUTHOR]

Buildings are significant energy consumers and provide a notable potential to reduce primary energy consumption and increase energy efficiency. Cost-effectiveness of energy efficiency projects is of crucial importance for their implementation. Cost-optimality of different packages of energy retrofit measures is studied across the EU, but Serbia mostly lacks such information. This paper analyzes cost-optimal solutions for Serbian residential buildings connected to district heating systems, considering three different scenarios related to the economic input parameters. Additionally, it considers the potential for primary energy savings beyond cost-optimality and associated costs. The optimal solutions, that correspond to minimal global cost or minimal primary energy consumption, are determined as the results of the combinatorial optimization problems. These problems are solved using the genetic algorithm and local search. The results are compared against the ones obtained with the sensitivity analysis. The global cost can be reduced by 8-43% in the cases of cost-optimal solutions, simultaneously saving 30-76% of primary energy. The potential to save primary energy is higher - it exceeds 70% in all the analyzed cases, but also requires higher global cost, sometimes larger than in the absence of the retrofit. The paper also emphasizes high dependencies of the results on very uncertain economic inputs. [ABSTRACT FROM AUTHOR]

This paper is one of the limited studies to investigate rebound effects in sectoral electricity consumption and the specific case of New Zealand. New Zealand, like other OECD economies, has aimed for energy efficiency improvements and reduced electricity consumption from 9.2 MWh per capita in 2010 to 8.6 MWh per capita in 2015. However, following a significant decline since 2010, electricity consumption in the main New Zealand sectors is increasing. Energy conservation could play an important role in meeting the growing demand for electricity but rebound effects can affect the effectiveness of conservation policies. We decompose the sectoral electricity prices to capture the asymmetric demand response to electricity price changes and estimate electricity demand elasticity during 1980 and 2015 to estimate the sectoral rebound effects. We find partial rebound effects of 54% and 23% in the industrial and commercial sectors respectively while we find no rebound effect at the aggregate level. The rebound effect is insignificant in the residential sector. These findings lead to policy recommendations for sector specific energy conservation measures and policies. [ABSTRACT FROM AUTHOR]

At this critical junction of industrialization, China is facing an increasingly prominent imbalance between energy supply and demand. It is of great social significance to study the energy-saving of buildings that consume a huge amount of energy. For most heating systems, energy waste mainly arises from inefficient operations of boilers, low efficiency of pipe transmission, and poor quality of heat supply. This paper researches and evaluates the energy-saving reconstruction of intelligent community heating (ICH) system based on the Internet of things (IoT). Firstly, the energy-saving reconstruction of the ICH system was analyzed, and a hydraulic regime model was derived from the simplified model of the water supply and return pipe networks. Then, the system pipe network was investigated in three aspects, namely, node flow balance, pipeline pressure drop balance, and loop pressure drop balance. On this basis, the authors presented the balance equation and finalized the hydraulic regime model of the system. After that, the energy consumption of the system was evaluated before and after the reconstruction, and the energy-saving benefit was predicted. The effectiveness of the proposed method was proved through experiments. [ABSTRACT FROM AUTHOR]

For areas with hot summer and cold winter, air conditioning is an essential tool to improve the living environment, but the traditional air conditioning needs to consume a lot of energy in cooling and heating, the fan operation noise is large and the sense of blowing will be uncomfortable. This paper briefly introduced the basic structure of a ground-source heat pump-floor radiant air conditioning system and the control strategy which was used for regulating the operation of the air conditioning system. Then, in order to ensure the appropriate comfort and reduce energy consumption, the control strategy was optimized. An experimental room in Xining, Qinghai province, was taken as an example for analysis. The results showed that the thermal comfort under the control strategy proposed in this study was more stable at the moderate degree and the temperature was slightly higher under the traditional control strategy, although the indoor temperature fluctuation under the optimal control strategy was large and the temperature was slightly lower than that under the traditional control strategy; under the control strategy proposed in this study, the air conditioning system had shorter operation time and less power consumption. [ABSTRACT FROM AUTHOR]

Currently, there has been an obvious lack of innovation within poultry houses heating, ventilation and air conditioning (HVAC) system design that deals with both energy efficiency and poultry welfare issues. This paper presents an innovative and renewable heating system for poultry house application to meet the welfare living environment requirement for breeding, to improve the energy efficiency of HVAC system and to decrease fossil fuel consumption and harmful gas emissions. The purpose of this study is to design, develop and test the highly efficient hybrid heating system via an integrated photovoltaic/thermal array with polyethylene heat exchanger coupled to geothermal heat pump system based on the East Midlands' climate conditions in the UK. The numerical model is established based on finite volume method and solved by using Engineering Equation Solver, and a good agreement with less than 15% difference between the numerical and experimental results is achieved. The results indicate that the annual electrical and thermal output are 11867 kWh and 30245 kWh, respectively, which not only could fulfil the poultry house electrical need, but also can provide ~43.5% electricity demand of the heat pump compressor operating. [ABSTRACT FROM AUTHOR]

To contain the spread of Covid-19, governments across the world imposed partial or complete lockdowns. National energy demand decreased in periods of lockdowns; however, as people spent more time at home, residential energy use likely increased. This paper reports the results of a UK survey study (N = 1016 participants) about their energy-use practices during the first lockdown in March 2020. The results indicated that self-reported heating behaviours did not substantially change during lockdown. Regarding appliance use, in particular the duration of usage for televisions and computing equipment has increased and has spread more over the day. Being less able to manage financially was correlated with a greater usage of the smart meter in-home display and a greater attempt to save energy was positively correlated with greater usage of the in-home display, though correlations were small. In summary, the results indicate that home energy-use behaviours, in particular around heating, did not change as much as might have been expected, which might at least partly be explained by the comparatively warm weather during the first lockdown. Corroborating the survey findings with actual energy data is the next essential step to understand findings in more detail. [ABSTRACT FROM AUTHOR]

In times of great transition of the European construction sector to energy efficient and nearly zero energy buildings (nZEB), a market observation containing qualitative and quantitative indications should help to fill out some of the current gaps concerning the EU 2020 carbon targets. Next to the economic challenges, there are equally important factors that hinder renovating the existing residential building stock and adding newly constructed high performance buildings. Under these circumstances this paper summarises the findings of a cross-comparative study of the societal and technical barriers of nZEB implementation in 7 Southern European countries. The study analyses the present situation and provides an overview on future prospects for nZEB in Southern Europe. The result presents an overview of challenges and provides recommendations based on available empirical evidence to further lower those barriers in the European construction sector. The paper finds that the most Southern European countries are poorly prepared for nZEB implementation and especially to the challenge/opportunity of retrofitting existing buildings. Creating a common approach to further develop nZEB targets, concepts and definitions in synergy with the climatic, societal and technical state of progress in Southern Europe is essential. The paper provides recommendations for actions to shift the identified gaps into opportunities for future development of climate adaptive high performance buildings. [ABSTRACT FROM AUTHOR]

Different policies with the goal of reducing energy consumption and other environmental impacts in the building sector coexist in Europe. Sustainable product polices, such as the Ecodesign and Energy Labelling Directives, have recently broadened the scope of their target product groups from a strict product approach to extended product and system approaches. Indeed, there is a potential for greater savings when the focus is at a system level rather than on regulating individual products. Product policies for space and water heating systems have recently introduced and implemented the package label, which is a modular approach, standing between the extended product and the system approaches. This paper presents a systematic analysis of the different system approaches of various policies from an engineering perspective. It analyses in detail the package concept and its features through a practical application using a real case study. It focuses on how the package concept can support decisions made in the building design phase and, in particular, how can support the choice of appropriate components based on estimating system performances. This brings building engineers and regulators closer regarding the use of more consistent data on energy performance. Finally, this paper highlights the need to improve the alignment of the building-related product policies with the Energy Performance of Buildings Directive. [ABSTRACT FROM AUTHOR]

The paper aims to discuss the power supply and heat supply system of wind turbine, promote the development of wind energy in heat recycling, and expand the application of renewable energy resources in replacing fossil energy. Starting from the construction of wind power heat storage system model, first, molten salt was selected as the fluid heat storage material. Based on the realization process of two-pot molten salt electrothermal transformation, the model of two-pot molten salt heat storage (MSHS) system was established. Second, based on the model of heat storage system, the high temperature MSHS wind power heating system was simulated by using the numerical simulation analysis method. The results showed that the simulation results of the thermal storage system model were highly consistent with the actual results, and the model was accurate and reliable, which was suitable for the simulation analysis of the thermal storage system. After a day of operation, the utilization rate of wind energy of the MSHS wind power heating system could reach more than 94%. The combination of the MSHS wind power system and regional heating had obvious effect on absorbing wind power, saving resources, and solving the problems of wind curtailment. In the MSHS wind power supply heating system, the configuration of MSHS significantly improved the utilization ratio of wind energy in the wind power generation system, even up to 100% at maximum. To sum up, the configuration of MSHS can absorb most of the wind energy generated on that day, thus improving the energy utilization ratio of the wind power generation system. [ABSTRACT FROM AUTHOR]

An electric turnout heating (ETH) system is an essential technical and economic issue. Uninterrupted operation of the turnouts is crucial to maintaining railway transport safety. The classic heating system is characterized by high energy consumption. The usage of it is extremely expensive, so the need to optimize the current system becomes more and more critical. At the same time, the progress in the contactless heating method has become a promising alternative. The paper presents the results of tests performed for electric turnout heating systems for two types of heaters. In the first place, the analysis of heat distribution was performed using the ANSYS Fluent v.16. The temperature fields in the turnout models filled with a model of semi-melting snow were analyzed. Thanks to cooperation with the Railway Institute in Warsaw the second stage of the research was possible to be completed. In this part, the models were implemented in the real world using the 49E1 railway turnout. The numerical solutions were validated by the experiments. The verification showed a high level of agreement among the results. The obtained results indicate the need for further tests of heating systems, to validate an optimal method of turnout heating. It was found that in the classic ETH, the working space area consumes a tremendous amount of energy. To ensure a higher efficiency of the heating process, the contactless heater is proposed as an alternative. [ABSTRACT FROM AUTHOR]

Regarding to the structure of final energy consumption in buildings and National Action Plans, the paper gives a short overview of energy consumption in buildings in Serbia, showing that the greatest potential for achieving savings lies in the implementation of measures which improve energy efficiency. Considering that over 60% of energy requirements for buildings is related to thermal energy, particular attention should be paid to the centralized heating systems, both during the design of a new system, and in the reconstruction of the existing one. Further discussed are the heat sources for the heating systems. The seasonal heat load duration curve for winter conditions in accordance to the Typical Meteorological Year for Belgrade is constructed and displayed. The analysis of the conventional system with a fossil fuel source, as well as the analysis of a hybrid heat source are conducted. The savings achieved in the primary energy, heating bills and CO2 emission reduction, which are attained by the use of a hybrid system, are shown in comparison with the conventional systems. Collecting data on investment costs, as well as the prices of energy and fuels in Serbian market, enabled calculation of the payback period when replacing the conventional system by the new hybrid one. [ABSTRACT FROM AUTHOR]

• Long term field evaluation of forecast control of heating. • Easy integration with existing installations in buildings. • Widely applicable measure for energy savings around 10%. • Payback time below one heating season. The priority for reaching carbon neutral buildings by 2050 is to first increase energy efficiency in existing buildings by use of easily and widely applicable measures that are verified based on long-term field research. One such solution is a forecast control of heating systems, which can be quickly and easily integrated to existing weather based controls. However, there are still no long-term field evaluation and detailed analyses of the main features of such a system, which would provide a clear picture about the system's energetical and economical features and thus increase their wide application in existing buildings. This paper provides the data from a long term field evaluation of an innovative forecast control of heating systems (forHEAT), which can be easily installed (in less than 2 h) and integrated with existing installations in millions of existing buildings in Europe and throughout the world. The energy consumption for heating was evaluated in seven residential buildings and three public office buildings before and after the installation and use of the forecast control. The resulting energy savings averaged 13.4% in the residential and 10.7% in the public buildings located in continental European climate, with very cold winters. The payback time averaged a 0.6 heating season and in most case studies does not exceed a single heating season. [ABSTRACT FROM AUTHOR]

This paper presents new metrics to measure the effect of thermal mass on the energy required to heat and cool buildings. Previous studies have been flawed as they have not considered the interaction between intermittent occupancy and thermal mass, which has a significant impact on overall energy use. However, existing parameters do not adequately capture these effects, so the new metrics developed in this paper are used to analyse the impact of thermal mass in hot climates with active cooling, and cold climates with active heating. The results agree with existing literature that high thermal mass structures are likely to be effective in hot climates; however, in cold climates the drawbacks of high thermal mass likely outweigh the advantages, and high thermal mass can cause an increase in energy use. This finding has implications for the design of buildings in cold climates, and contradicts the commonly-held assumption that high thermal mass is correlated with low energy use. The new metrics (transient energy ratio and effective U -value) provide a generalisable method to quantify these effects. They are further used here to analyse the dynamic performance of heavily insulated buildings and show that high thermal mass often leads to higher energy use in cold climates. [ABSTRACT FROM AUTHOR]

A model to evaluate the performance of a solar powered regenerative Organic Rankine Cycle (R-ORC) using five dry organic fluids: RC318, R227ea, R236ea, R236fa, and R218, is presented in this paper. The system is evaluated in two locations in the U.S.: Jackson, MS and Tucson, AZ. The weather data for each location is used to determine the heat available from the solar collector that could be used by the R-ORC to generate power. Results from the R-ORC performance are compared with a basic ORC using first and second law criteria as well as primary energy consumption (PEC) and carbon dioxide emission (CDE) savings for both locations. An economic analysis to determine the maximum capital cost for a desired payback period is presented in this paper. A parametric analysis is also performed to study the effect of the turbine efficiency as well as the open feed organic fluid heater intermediate pressure on the system performance. Results indicate that the R-ORC is able to generate more power than the basic ORC for some of the selected working fluids. For the R-ORC, R236ea is the working fluid that show the best performance among the evaluated fluids under the modeled conditions. On the other hand, the basic ORC with R236ea as the working fluid outperformed three of the fluids in the R-ORC. Also, the R-ORC evaluated in Tucson, AZ is able to generate more power, to provide more PEC and CDE savings, and had a higher available capital cost than the R-ORC evaluated in in Jackson, MS. [ABSTRACT FROM AUTHOR]

Abstract The goal of this paper is to evaluate the advantages achieved through the adoption of low impact energy saving strategies for an independent natural gas fired boiler heating system in a recently built residential building in Rome. For this purpose, an existing apartment was selected as a case study and dynamically simulated in TRNSYS with which the model was validated. Low impact retrofit solutions and heating system management were considered as possible solutions to achieve energy savings. The chosen retrofit solutions consist of envelope elements replacements and building automation controls improvement while heating system management depends on occupants' behavior. Overall, 36 scenarios were considered, starting from the combination of 3 comfort temperature set-points, 2 insulation levels for transparent components, 2 types of zone comfort set-point control with 3 dead-band temperatures. Each case is evaluated in terms of energy results and economic results. The simulation results provide energy savings up to 44% when windows are replaced lowering their transmittance nearby 32%. The choice of a proportional control for zone temperature set-point compared to a simple on-off control guarantee energy saving up to 39% when temperature set-point is low (19 °C) and controls dead-band is 0.5 °C. The effect of different temperature control dead-bands is higher when proportional controls are adopted (up to 40% passing from 2 to 0.5 °C dead-band for 19 °C set-point). Energy consumption reductions up to 63% are achieved if the indoor temperature set-point is lowered 2 °C, underlining the importance of occupants' behavior. At last, an analysis on socio-economic impacts was performed, based on the results of a previous study focused on the externality costs due to pollutants emissions. Highlights • Energy advantages achieved through the adoption of low impact energy saving strategies for an independent gas fired boiler were evaluated. • An existing apartment of a modern residential building in Rome was selected and dynamically simulated in TRNSYS. • 36 energy saving scenarios were considered. • Each case was evaluated in terms of energy and economic results. • An analysis on socio-economic impacts was performed, based on the externality costs due to pollutants emissions. [ABSTRACT FROM AUTHOR]

In this study we suggest that a more careful and systematic understanding of fuel poverty can be developed through a multidimensional approach to the relationship between monetary poverty, residential energy efficiency, and heating restriction. Our objective is to provide new ways to better identify those who suffer the most from fuel poverty to optimize policy. Thus, the purpose of this paper is to measure poverty in three steps following Sen (1979): (i) combining poverty characteristics into an aggregate measure involving a fuel poverty index (FPI), (ii) identification and comparison of poor people according to existing and new definitions and (iii) testing the robustness of the fuel poverty composite indicator. Our results show that the usual measures reveal a gap that does not consider all the dimensions of fuel poverty, excluding those who are at or above a certain threshold, but who are nevertheless vulnerable. [ABSTRACT FROM AUTHOR]

In this paper, a novel direct load control (DLC) planning based on providing free energy credits to residential end-users for their heating, ventilation, and air conditioning load during demand response (DR) events is proposed. The obtained credit can then be used by the end-users during relatively higher price periods free-of-cost to enable them lowering their energy procurement costs. Furthermore, the resulting reduction in the total household energy consumption considerably decreases the critical load demands in power systems, which is of vital importance for load-serving entities in maintaining the balance between supply and demand during peak load periods. In this regard, the aforementioned energy credits-based incentive mechanism is proposed for end-users enrolled in the DLC-based DR program, as a new contribution to the existing literature, testing it in a stochastic day-ahead planning context. [ABSTRACT FROM AUTHOR]

Abstract Beyond the definition and measurement of energy poverty, which have mainly attracted research interest over the last decades, attention has recently begun to turn to a broader notion of energy vulnerability. So far, this has mostly been approached on a theoretical base, suggesting the incorporation of broader socio-economic aspects into the energy poverty framework. However, the quantitative measurement of energy vulnerability is still an unexplored field of research. In this paper, the "Vulnerability Index" is developed, which, based on stochastic analysis, quantifies the vulnerability of a population to the energy poverty ratio, compared to a reference population. Moreover, Sensitivity Analysis quantifies the particular contribution of various parameters to the problem, by determining their weighting factors. As case study, the vulnerability of Greek mountainous regions with respect to the country level was studied. The results showed that households living in mountainous regions are more vulnerable versus those of the whole country, at 89.7%. It was also found that energy policy should focus on raising incomes of mountainous population and, afterwards, on energy saving measures and reduction of heating cost in mountains. The methodology suggested can address social inequalities of vulnerable population groups, in terms of energy poverty. [ABSTRACT FROM AUTHOR]

Highlights • A component-based method of machine learning for performance prediction in engineering. • Components instead of one monolithic model extend reusability and generalization. • Flexible design support by machine learning for early design phases. • Internal parameters between components allow insights in the “black box” of machine learning. • Good prediction accuracies (error < 3.9%) for test cases different from the training model. Abstract Machine learning is increasingly being used to predict building performance. It replaces building performance simulation, and is used for data analytics. Major benefits include the simplification of prediction models and a dramatic reduction in computation times. However, the monolithic whole-building models suffer from a limited transfer of models and their data to other contexts. This imposes a vital limitation on the application of machine learning in building design. In this paper, we present a component-based approach that develops machine learning models not only for a parameterized whole building design, but for parameterized components of the design as well. Two decomposition levels, namely construction level components (wall, windows, floors, roof, etc.), and zone-level components, are examined. Results in test cases show that, depending on how far the cases deviate from the training case and its data, high prediction quality may be achieved with errors as low as 3.7% for cooling and 3.9% for heating. [ABSTRACT FROM AUTHOR]

Housing Stock Energy Models (HSEMs) play a determinant role in the study of strategies to decarbonise the UK housing stock. Over the past three decades, a range of national HSEMs have been developed and deployed to estimate the energy demand of the 27 million dwellings that comprise the UK housing stock. However, despite ongoing improvements in the fidelity of both modelling strategies and calibration data, their longevity, usability and reliability have been compromised by a lack of modularity and openness in the underlying algorithms and calibration data sets. To address these shortfalls, a new open and modular platform for the dynamic simulation of national (in the first instance, the UK) housing stocks has been developed—the Energy Hub (EnHub) . This paper describes EnHub’s architecture, its underlying rationale, the datasets it employs, its current scope, examples of its application, and plans for its further development. In this we pay particular attention to the systematic identification of housing archetypes and their corresponding attributes to represent the stock. The scenarios we analyse in our initial applications of EnHub, based on these archetypes, focus on improvements to housing fabric, the efficiency of lights and appliances and of the related behavioural practices of their users. In this we consider a perfect uptake scenario and a conditional (partial) uptake scenario. Results from the disaggregation of energy use throughout the stock for the baseline case and for our scenarios indicate that improvements to solid wall and loft thermal performance are particularly effective, as are reductions in infiltration. Improvements in lights and appliances and reductions in the intensity of their use are largely counteracted by increases in heating demand. Housing archetypes that offer the greatest potential savings are apartments and detached dwellings, owing to their relatively high surface area to volume ratio; in particular for pre-1919 and inter-war epochs. [ABSTRACT FROM AUTHOR]

This paper addresses the problem of thermal energy control in shopping centers through the application of model predictive control (MPC) strategies. In particular, this paper uses an existing shopping center as pilot case, which is characterized by a large common multifloor space, which, in turn, gives rise to a significant vertical thermal stratification. This paper explores the importance of MPC parameters to energy efficiency and comfort levels. In addition, it addresses some notable extensions, from economic optimization, which paves the way to real-time pricing techniques, to integration with renewables, to robustness enforcement through Kalman filters, to hybrid control with switching signals mixed with continuous signals. [ABSTRACT FROM PUBLISHER]

Buildings are one of the biggest energy consumers in urban environments, so its efficient use represents a constant challenge. In public objects and households, a large part of the energy is used for heating and cooling. The orientation of the object, as well as the overall heat transfer coefficient (U-value) of transparent and non-transparent parts of the envelope, can have a significant impact on building energy needs. In this paper, analysis of the influence of different orientations, U-values of envelope elements, and size of windows on annual heating and cooling energy for an office building in city of Nis, Serbia, is presented. Model of the building was made in the Google SketchUp software, while the results of energy performance were obtained using EnergyPlus and jEplus, taking into account the parameters of thermal comfort and climatic data for the area of city of Nis. Obtained results showed that, for varied parameters, the maximum difference in annual heating energy is 15129.4 kWh, i. e per m2 27.75 kWh/m², while the maximum difference in annual cooling energy is 14356.1 kWh, i. e per m2 26.33 kWh/m². Considering that differences in energy consumption are significant, analysis of these parameters in the early stage of design process can affect on increase of building energy efficiency. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of heating expenses in a large social housing stock in the North of France. An artificial neural network (ANN) approach is taken for the analysis of heating consumption data collected over four years in 84 social housing residences containing 13,179 dwellings that use collective heating. Analysis provides an understanding of the influence of both physical and socio-economic parameters on heating expenses and proposes a predictive model for these expenses. The model shows that the heating expenses are influenced by both the buildings' physical parameters and social indicators. Concerning the physical parameters, the most important indicators are the area of the dwellings, followed by the building age and the DPE (energy performance diagnostic). The family size as well as tenant age and income have an important influence on heating expense. The model is then used for establishing a data-based strategy for social housing stock renovation. [ABSTRACT FROM AUTHOR]

District heating system brings with it the problem of achieving a fair billing service for heating of apartment buildings in the case of uneven temperature in them. The problem is most pronounced when the individual apartments are completely excluded from the heating system of the building. The model of an existing building with 24 apartments was simulated in the software EnergyPlus, for different characteristics of the thermal envelope and different conditions of use, when the apartment with the lowest energy consumption is excluded from the heating system. It was simulated the exclusion of this apartment in which people are present and the lights and electrical appliances are turned on and in which there is no presence of people and electricity consumption (the apartment is empty). As a measure of energy flow between unheated and adjacent apartments, the parameter “stolen” energy is defined. The results of the conducted simulations show that the stolen energy is reduced by the exterior and interior insulation of the building. In this paper, data on energy flow when there is interior insulation in apartments, in particular according to the current regulations in Serbia, are especially analyzed. The results show that, depending on the case and scenario, the stolen energy ranges from 27.23 to 7.97 kWh/m 2 . The insulation of interior walls of the building can significantly mitigate the problem of energy flow due to temperature differences between apartments. [ABSTRACT FROM AUTHOR]