Search

This document is an editorial from the journal Agronomy titled "The Future of Weed Science: Novel Approaches to Weed Management." The editorial discusses the need for new and innovative approaches to weed management in light of the European Union's focus on reducing chemical control. The document highlights various research papers that cover topics such as agroecological weed management, precision agriculture, remote sensing, and the potential role of allelopathy and nature-based compounds. The authors emphasize the importance of combining these methods, evaluating them under different conditions, and optimizing strategies for both agronomic performance and ecosystem services. [Extracted from the article]

World agriculture is facing a great challenge since it is necessary to find a sustainable way to increase food production. Current trends in advancing the agriculture sector are based on leveraging remote sensing technology and the use of biostimulants. However, the efficient implementation of both of these on a commercial scale for the purposes of productivity improvement remains a challenge. Thus, by proposing a crop monitoring strategy based on remote sensing data, this paper aims to verify and anticipate the impact of applying a Glycinebetaine biostimulant (GB) on the final yield. The study was carried out in a rice-producing area in Eastern Spain (Valencia) in 2021. GB was applied by drone 33 days after sowing (tillering phase). Phenology was monitored and crop production parameters were determined. Regarding satellite data, Sentinel-2 cloud-free images were obtained from sowing to harvest, using the bands at 10 m. Planet data were used to evaluate the results from Sentinel-2. The results show that GB applied 33 days after sowing improves both crop productive parameters and commercial yield (13.06% increase). The design of the proposed monitoring strategy was based on the dynamics and correlations between the visible (green and red) and NIR bands. The analysis showed differences when comparing the GB and control areas, and permitted the determination of the moment in which the effect of GB on yield (tillering and maturity) may be greater. In addition, an index was constructed to verify the crop monitoring strategy, its mathematical expression being: NCMI = (NIR − (red + green))/(NIR + red + green). Compared with the other VIs (NDVI, GNDVI and EVI2), the NCMI presents a greater sensitivity to changes in the green, red and NIR bands, a lower saturation phenomenon than NDVI and a better monitoring of rice phenology and management than GNDVI and EVI2. These results were evaluated with Planet images, obtaining similar results. In conclusion, in this study, we confirm the improvement in rice crop productivity by improving sustainable plant nutrition with the use of biostimulants and by increasing the components that define crop yield (productive tillers, spikelets and grains). Additionally, crop monitoring using remote sensing technology permits the anticipation and understanding of the productive behavior and the evolution of the phenological stages of the crop, in accordance with crop management. [ABSTRACT FROM AUTHOR]

World agriculture is facing a great challenge since it is necessary to find a sustainable way to increase food production. Current trends in advancing the agriculture sector are based on leveraging remote sensing technology and the use of biostimulants. However, the efficient implementation of both of these on a commercial scale for the purposes of productivity improvement remains a challenge. Thus, by proposing a crop monitoring strategy based on remote sensing data, this paper aims to verify and anticipate the impact of applying a Glycinebetaine biostimulant (GB) on the final yield. The study was carried out in a rice-producing area in Eastern Spain (Valencia) in 2021. GB was applied by drone 33 days after sowing (tillering phase). Phenology was monitored and crop production parameters were determined. Regarding satellite data, Sentinel-2 cloud-free images were obtained from sowing to harvest, using the bands at 10 m. Planet data were used to evaluate the results from Sentinel-2. The results show that GB applied 33 days after sowing improves both crop productive parameters and commercial yield (13.06% increase). The design of the proposed monitoring strategy was based on the dynamics and correlations between the visible (green and red) and NIR bands. The analysis showed differences when comparing the GB and control areas, and permitted the determination of the moment in which the effect of GB on yield (tillering and maturity) may be greater. In addition, an index was constructed to verify the crop monitoring strategy, its mathematical expression being: NCMI = (NIR − (red + green))/(NIR + red + green). Compared with the other VIs (NDVI, GNDVI and EVI2), the NCMI presents a greater sensitivity to changes in the green, red and NIR bands, a lower saturation phenomenon than NDVI and a better monitoring of rice phenology and management than GNDVI and EVI2. These results were evaluated with Planet images, obtaining similar results. In conclusion, in this study, we confirm the improvement in rice crop productivity by improving sustainable plant nutrition with the use of biostimulants and by increasing the components that define crop yield (productive tillers, spikelets and grains). Additionally, crop monitoring using remote sensing technology permits the anticipation and understanding of the productive behavior and the evolution of the phenological stages of the crop, in accordance with crop management.

Crop growth models and remote sensing are useful tools for predicting crop growth and yield, but each tool has inherent drawbacks when predicting crop growth and yield at a regional scale. To improve the accuracy and precision of regional corn yield predictions, a simple approach for assimilating Moderate Resolution Imaging Spectroradiometer (MODIS) products into a crop growth model was developed, and regional yield prediction performance was evaluated in a major corn-producing state, Illinois, USA. Corn growth and yield were simulated for each grid using the Crop Environment Resource Synthesis (CERES)-Maize model with minimum inputs comprising planting date, fertilizer amount, genetic coefficients, soil, and weather data. Planting date was estimated using a phenology model with a leaf area duration (LAD)-logistic function that describes the seasonal evolution of MODIS-derived leaf area index (LAI). Genetic coefficients of the corn cultivar were determined to be the genetic coefficients of the maturity group [included in Decision Support System for Agrotechnology Transfer (DSSAT) 4.6], which shows the minimum difference between the maximum LAI derived from the LAD-logistic function and that simulated by the CERES-Maize model. In addition, the daily water stress factors were estimated from the ratio between daily leaf area/weight growth rates estimated from the LAD-logistic function and that simulated by the CERES-Maize model under the rain-fed and auto-irrigation conditions. The additional assimilation of MODIS data-derived water stress factors and LAI under the auto-irrigation condition showed the highest prediction accuracy and precision for the yearly corn yield prediction (R2 is 0.78 and the root mean square error is 0.75 t ha-1). The present strategy for assimilating MODIS data into a crop growth model using minimum inputs was successful for predicting regional yields, and it should be examined for spatial portability to diverse agro-climatic and agro-technology regions. [ABSTRACT FROM AUTHOR]

Sorghum (Sorghum bicolor L. Moench) is a C4 tropical grass that plays an essential role in providing nutrition to humans and livestock, particularly in marginal rainfall environments. The timing of head development and the number of heads per unit area are key adaptation traits to consider in agronomy and breeding but are time consuming and labor intensive to measure. We propose a two-step machine-based image processing method to detect and count the number of heads from high-resolution images captured by unmanned aerial vehicles (UAVs) in a breeding trial. To demonstrate the performance of the proposed method, 52 images were manually labeled; the precision and recall of head detection were 0.87 and 0.98, respectively, and the coefficient of determination (R 2) between the manual and new methods of counting was 0.84. To verify the utility of the method in breeding programs, a geolocation-based plot segmentation method was applied to pre-processed ortho-mosaic images to extract >1000 plots from original RGB images. Forty of these plots were randomly selected and labeled manually; the precision and recall of detection were 0.82 and 0.98, respectively, and the coefficient of determination between manual and algorithm counting was 0.56, with the major source of error being related to the morphology of plants resulting in heads being displayed both within and outside the plot in which the plants were sown, i.e., being allocated to a neighboring plot. Finally, the potential applications in yield estimation from UAV-based imagery from agronomy experiments and scouting of production fields are also discussed. [ABSTRACT FROM AUTHOR]

Remote sensing has been widely used for mapping land cover and is considered key to monitoring changes in forest areas in the REDD+ Measurement, Reporting and Verification (MRV) system. But Remote Sensing as a desk study cannot capture the whole picture; it also requires ground checking. Therefore, complementing remote sensing analysis using participatory mapping can help provide information for an initial forest cover assessment, gain better understanding of how local land use might affect changes, and provide a way to engage local communities in REDD+. Our study looked at the potential of participatory mapping in providing complementary information for remotely sensed maps. The research sites were located in different ecological and socio-economic contexts in the provinces of Papua, West Kalimantan and Central Java, Indonesia. Twenty-one maps of land cover and land use were drawn with local community participation during focus group discussions in seven villages. These maps, covering a total of 270,000ha, were used to add information to maps developed using remote sensing, adding 39 land covers to the eight from our initial desk assessment. They also provided additional information on drivers of land use and land cover change, resource areas, territory claims and land status, which we were able to correlate to understand changes in forest cover. Incorporating participatory mapping in the REDD+ MRV protocol would help with initial remotely sensed land classifications, stratify an area for ground checks and measurement plots, and add other valuable social data not visible at the RS scale. Ultimately, it would provide a forum for local communities to discuss REDD+ activities and develop a better understanding of REDD+. [ABSTRACT FROM AUTHOR]

Advances in automation and data science have led agriculturists to seek real-time, high-quality, high-volume crop data to accelerate crop improvement through breeding and to optimize agronomic practices. Breeders have recently gained massive data-collection capability in genome sequencing of plants. Faster phenotypic trait data collection and analysis relative to genetic data leads to faster and better selections in crop improvement. Furthermore, faster and higher-resolution crop data collection leads to greater capability for scientists and growers to improve precision-agriculture practices on increasingly larger farms; e.g., site-specific application of water and nutrients. Unmanned aerial vehicles (UAVs) have recently gained traction as agricultural data collection systems. Using UAVs for agricultural remote sensing is an innovative technology that differs from traditional remote sensing in more ways than strictly higher-resolution images; it provides many new and unique possibilities, as well as new and unique challenges. Herein we report on processes and lessons learned from year 1—the summer 2015 and winter 2016 growing seasons–of a large multidisciplinary project evaluating UAV images across a range of breeding and agronomic research trials on a large research farm. Included are team and project planning, UAV and sensor selection and integration, and data collection and analysis workflow. The study involved many crops and both breeding plots and agronomic fields. The project’s goal was to develop methods for UAVs to collect high-quality, high-volume crop data with fast turnaround time to field scientists. The project included five teams: Administration, Flight Operations, Sensors, Data Management, and Field Research. Four case studies involving multiple crops in breeding and agronomic applications add practical descriptive detail. Lessons learned include critical information on sensors, air vehicles, and configuration parameters for both. As the first and most comprehensive project of its kind to date, these lessons are particularly salient to researchers embarking on agricultural research with UAVs. [ABSTRACT FROM AUTHOR]

The development of UAV-based sensing systems for agronomic applications serves the improvement of crop management. The latter is in the focus of precision agriculture which intends to optimize yield, fertilizer input, and crop protection. Besides, in some cropping systems vehicle-based sensing devices are less suitable because fields cannot be entered from certain growing stages onwards. This is true for rice, maize, sorghum, and many more crops. Consequently, UAV-based sensing approaches fill a niche of very high resolution data acquisition on the field scale in space and time. While mounting RGB digital compact cameras to low-weight UAVs (< 5 kg) is well established, the miniaturization of sensors in the last years also enables hyperspectral data acquisition from those platforms. From both, RGB and hyperspectral data, vegetation indices (VIs) are computed to estimate crop growth parameters. In this contribut ion, we compare two different sensing approaches from a low-weight UAV platform (< 5 kg) for monitoring a nitrogen field experiment of winter wheat and a corresponding farmers' field in Western Germany. (i) A standard digital compact camera was flown to acquire RGB images which are used to compute the RGBVI and (ii) NDVI is computed from a newly modified version of the Yara N-Sensor. The latter is a well-established tractor-based hyperspectral sensor for crop management and is available on the market since a decade. It was modified for this study to fit the requirements of UAV-based data acquisition. Consequently, we focus on three objectives in this contribution: (1) to evaluate the potential of the uncalibrated RGBVI for monitoring nitrogen status in winter wheat, (2) investigate the UAV-based performance of the modified Yara N-Sensor, and (3) compare the results of the two different UAV-based sensing approaches for winter wheat. [ABSTRACT FROM AUTHOR]

Differences exist among analysis results of agriculture monitoring and crop production based on remote sensing observations, which are obtained at different spatial scales from multiple remote sensors in same time period, and processed by same algorithms, models or methods. These differences can be mainly quantitatively described from three aspects, i.e. multiple remote sensing observations, crop parameters estimation models, and spatial scale effects of surface parameters. Our research proposed a new method to analyse and correct the differences between multi-source and multi-scale spatial remote sensing surface reflectance datasets, aiming to provide references for further studies in agricultural application with multiple remotely sensed observations from different sources. The new method was constructed on the basis of physical and mathematical properties of multi-source and multi-scale reflectance datasets. Theories of statistics were involved to extract statistical characteristics of multiple surface reflectance datasets, and further quantitatively analyse spatial variations of these characteristics at multiple spatial scales. Then, taking the surface reflectance at small spatial scale as the baseline data, theories of Gaussian distribution were selected for multiple surface reflectance datasets correction based on the above obtained physical characteristics and mathematical distribution properties, and their spatial variations. This proposed method was verified by two sets of multiple satellite images, which were obtained in two experimental fields located in Inner Mongolia and Beijing, China with different degrees of homogeneity of underlying surfaces. Experimental results indicate that differences of surface reflectance datasets at multiple spatial scales could be effectively corrected over non-homogeneous underlying surfaces, which provide database for further multi-source and multi-scale crop growth monitoring and yield prediction, and their corresponding consistency analysis evaluation. [ABSTRACT FROM AUTHOR]